arm-trusted-firmware/plat/arm/css/common/css_scp_bootloader.c

154 lines
4.4 KiB
C
Raw Normal View History

Add common ARM and CSS platform code This major change pulls out the common functionality from the FVP and Juno platform ports into the following categories: * (include/)plat/common. Common platform porting functionality that typically may be used by all platforms. * (include/)plat/arm/common. Common platform porting functionality that may be used by all ARM standard platforms. This includes all ARM development platforms like FVP and Juno but may also include non-ARM-owned platforms. * (include/)plat/arm/board/common. Common platform porting functionality for ARM development platforms at the board (off SoC) level. * (include/)plat/arm/css/common. Common platform porting functionality at the ARM Compute SubSystem (CSS) level. Juno is an example of a CSS-based platform. * (include/)plat/arm/soc/common. Common platform porting functionality at the ARM SoC level, which is not already defined at the ARM CSS level. No guarantees are made about the backward compatibility of functionality provided in (include/)plat/arm. Also remove any unnecessary variation between the ARM development platform ports, including: * Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the Juno implementation, which copies the information from BL2 memory instead of expecting it to persist in shared memory. * Unify the TZC configuration. There is no need to add a region for SCP in Juno; it's enough to simply not allow any access to this reserved region. Also set region 0 to provide no access by default instead of assuming this is the case. * Unify the number of memory map regions required for ARM development platforms, although the actual ranges mapped for each platform may be different. For the FVP port, this reduces the mapped peripheral address space. These latter changes will only be observed when the platform ports are migrated to use the new common platform code in subsequent patches. Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8
2015-03-19 18:58:55 +00:00
/*
* Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch_helpers.h>
#include <css_def.h>
#include <platform.h>
#include "css_mhu.h"
#include "css_scp_bootloader.h"
#include "css_scpi.h"
/* Boot commands sent from AP -> SCP */
#define BOOT_CMD_START 0x01
#define BOOT_CMD_DATA 0x02
typedef struct {
uint32_t image_size;
} cmd_start_payload;
typedef struct {
uint32_t sequence_num;
uint32_t offset;
uint32_t size;
} cmd_data_payload;
#define BOOT_DATA_MAX_SIZE 0x1000
/* Boot commands sent from SCP -> AP */
#define BOOT_CMD_ACK 0x03
#define BOOT_CMD_NACK 0x04
typedef struct {
uint32_t sequence_num;
} cmd_ack_payload;
/*
* Unlike the runtime protocol, the boot protocol uses the same memory region
* for both AP -> SCP and SCP -> AP transfers; define the address of this...
*/
static void * const cmd_payload = (void *)(MHU_SECURE_BASE + 0x0080);
static void *scp_boot_message_start(void)
{
mhu_secure_message_start();
return cmd_payload;
}
static void scp_boot_message_send(unsigned command, size_t size)
{
/* Make sure payload can be seen by SCP */
if (MHU_PAYLOAD_CACHED)
flush_dcache_range((unsigned long)cmd_payload, size);
/* Send command to SCP */
mhu_secure_message_send(command | (size << 8));
}
static uint32_t scp_boot_message_wait(size_t size)
{
uint32_t response = mhu_secure_message_wait();
/* Make sure we see the reply from the SCP and not any stale data */
if (MHU_PAYLOAD_CACHED)
inv_dcache_range((unsigned long)cmd_payload, size);
return response & 0xff;
}
static void scp_boot_message_end(void)
{
mhu_secure_message_end();
}
static int transfer_block(uint32_t sequence_num, uint32_t offset, uint32_t size)
{
cmd_data_payload *cmd_data = scp_boot_message_start();
cmd_data->sequence_num = sequence_num;
cmd_data->offset = offset;
cmd_data->size = size;
scp_boot_message_send(BOOT_CMD_DATA, sizeof(*cmd_data));
cmd_ack_payload *cmd_ack = cmd_payload;
int ok = scp_boot_message_wait(sizeof(*cmd_ack)) == BOOT_CMD_ACK
&& cmd_ack->sequence_num == sequence_num;
scp_boot_message_end();
return ok;
}
int scp_bootloader_transfer(void *image, unsigned int image_size)
{
uintptr_t offset = (uintptr_t)image - MHU_SECURE_BASE;
uintptr_t end = offset + image_size;
uint32_t response;
mhu_secure_init();
/* Initiate communications with SCP */
do {
cmd_start_payload *cmd_start = scp_boot_message_start();
cmd_start->image_size = image_size;
scp_boot_message_send(BOOT_CMD_START, sizeof(*cmd_start));
response = scp_boot_message_wait(0);
scp_boot_message_end();
} while (response != BOOT_CMD_ACK);
/* Transfer image to SCP a block at a time */
uint32_t sequence_num = 1;
size_t size;
while ((size = end - offset) != 0) {
if (size > BOOT_DATA_MAX_SIZE)
size = BOOT_DATA_MAX_SIZE;
while (!transfer_block(sequence_num, offset, size))
; /* Retry forever */
offset += size;
sequence_num++;
}
/* Wait for SCP to signal it's ready */
return scpi_wait_ready();
}