andrius
/
arm-trusted-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
arm-trusted-firmware/docs/plat/poplar.rst

177 lines
5.4 KiB
ReStructuredText
Raw Normal View History

Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
Description
===========
Poplar is the first development board compliant with the 96Boards Enterprise
Edition TV Platform specification.
The board features the Hi3798C V200 with an integrated quad-core 64-bit
Update Arm TF references to TF-A Update Arm Trusted Firmware references in the upstream documents to Trusted Firmware-A (TF-A). This is for consistency with and disambiguation from Trusted Firmware-M (TF-M). Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A. Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22 Signed-off-by: Dan Handley <dan.handley@arm.com> Signed-off-by: David Cunado <david.cunado@arm.com>
2018-03-01 18:44:00 +00:00
Arm Cortex A53 processor and high performance Mali T720 GPU, making it capable
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
of running any commercial set-top solution based on Linux or Android.
It supports a premium user experience with up to H.265 HEVC decoding of 4K
video at 60 frames per second.
poplar: Fix format of documentation The document was being rendered incorrectly. Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-12-06 10:33:15 +00:00
::
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
SOC Hisilicon Hi3798CV200
Update Arm TF references to TF-A Update Arm Trusted Firmware references in the upstream documents to Trusted Firmware-A (TF-A). This is for consistency with and disambiguation from Trusted Firmware-M (TF-M). Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A. Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22 Signed-off-by: Dan Handley <dan.handley@arm.com> Signed-off-by: David Cunado <david.cunado@arm.com>
2018-03-01 18:44:00 +00:00
CPU Quad-core Arm Cortex-A53 64 bit
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
USB Two USB 2.0 ports One USB 3.0 ports
CONSOLE USB-micro port for console support
ETHERNET 1 GBe Ethernet
PCIE One PCIe 2.0 interfaces
JTAG 8-Pin JTAG
EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
WIFI 802.11AC 2*2 with Bluetooth
CONNECTORS One connector for Smart Card One connector for TSI
At the start of the boot sequence, the bootROM executes the so called l-loader
binary whose main role is to change the processor state to 64bit mode. This
Update Arm TF references to TF-A Update Arm Trusted Firmware references in the upstream documents to Trusted Firmware-A (TF-A). This is for consistency with and disambiguation from Trusted Firmware-M (TF-M). Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A. Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22 Signed-off-by: Dan Handley <dan.handley@arm.com> Signed-off-by: David Cunado <david.cunado@arm.com>
2018-03-01 18:44:00 +00:00
must happen prior to invoking Trusted Firmware-A:
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
poplar: Fix format of documentation The document was being rendered incorrectly. Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-12-06 10:33:15 +00:00
::
Update Arm TF references to TF-A Update Arm Trusted Firmware references in the upstream documents to Trusted Firmware-A (TF-A). This is for consistency with and disambiguation from Trusted Firmware-M (TF-M). Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A. Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22 Signed-off-by: Dan Handley <dan.handley@arm.com> Signed-off-by: David Cunado <david.cunado@arm.com>
2018-03-01 18:44:00 +00:00
l-loader --> Trusted Firmware-A --> u-boot
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
How to build
============
Code Locations
--------------
Update Arm TF references to TF-A Update Arm Trusted Firmware references in the upstream documents to Trusted Firmware-A (TF-A). This is for consistency with and disambiguation from Trusted Firmware-M (TF-M). Also update other Arm trademarks, e.g. ARM->Arm, ARMv8->Armv8-A. Change-Id: I8bb0e18af29c6744eeea2dc6c08f2c10b20ede22 Signed-off-by: Dan Handley <dan.handley@arm.com> Signed-off-by: David Cunado <david.cunado@arm.com>
2018-03-01 18:44:00 +00:00
- Trusted Firmware-A:
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
`link <https://github.com/ARM-software/arm-trusted-firmware>`__
- l-loader:
`link <https://github.com/Linaro/poplar-l-loader.git>`__
- u-boot:
`link <http://git.denx.de/u-boot.git>`__
Build Procedure
---------------
- Fetch all the above 3 repositories into local host.
Make all the repositories in the same ${BUILD\_PATH}.
- Prepare the AARCH64 toolchain.
- Build u-boot using poplar_defconfig
poplar: Fix format of documentation The document was being rendered incorrectly. Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-12-06 10:33:15 +00:00
.. code:: bash
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
make CROSS_COMPILE=aarch64-linux-gnu- poplar_defconfig
make CROSS_COMPILE=aarch64-linux-gnu-
- Build atf providing the previously generated u-boot.bin as the BL33 image
poplar: Fix format of documentation The document was being rendered incorrectly. Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-12-06 10:33:15 +00:00
.. code:: bash
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none PLAT=poplar
BL33=u-boot.bin
- Build l-loader (generated the final fastboot.bin)
1. copy the atf generated files fip.bin and bl1.bin to l-loader/atf/
2. export ARM_TRUSTED_FIRMWARE=${ATF_SOURCE_PATH)
3. make
Install Procedure
-----------------
- Copy l-loader/fastboot.bin to a FAT partition on a USB pen drive.
- Plug the USB pen drive to any of the USB2 ports
- Power the board while keeping S3 pressed (usb_boot)
The system will boot into a u-boot shell which you can then use to write the
working firmware to eMMC.
Boot trace
==========
poplar: Fix format of documentation The document was being rendered incorrectly. Change-Id: I6e243d17d7cb6247f91698bc195eb0f6efeb7d17 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-12-06 10:33:15 +00:00
::
Bootrom start
Boot Media: eMMC
Decrypt auxiliary code ...OK
lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
Entry boot auxiliary code
Auxiliary code - v1.00
DDR code - V1.1.2 20160205
Build: Mar 24 2016 - 17:09:44
Reg Version: v134
Reg Time: 2016/03/18 09:44:55
Reg Name: hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
Boot auxiliary code success
Bootrom success
LOADER: Switched to aarch64 mode
LOADER: Entering ARM TRUSTED FIRMWARE
LOADER: CPU0 executes at 0x000ce000
INFO: BL1: 0xe1000 - 0xe7000 [size = 24576]
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v1.3(debug):v1.3-372-g1ba9c60
NOTICE: BL1: Built : 17:51:33, Apr 30 2017
INFO: BL1: RAM 0xe1000 - 0xe7000
INFO: BL1: Loading BL2
INFO: Loading image id=1 at address 0xe9000
INFO: Image id=1 loaded at address 0xe9000, size = 0x5008
NOTICE: BL1: Booting BL2
INFO: Entry point address = 0xe9000
INFO: SPSR = 0x3c5
NOTICE: BL2: v1.3(debug):v1.3-372-g1ba9c60
NOTICE: BL2: Built : 17:51:33, Apr 30 2017
INFO: BL2: Loading BL31
INFO: Loading image id=3 at address 0x129000
INFO: Image id=3 loaded at address 0x129000, size = 0x8038
INFO: BL2: Loading BL33
INFO: Loading image id=5 at address 0x37000000
INFO: Image id=5 loaded at address 0x37000000, size = 0x58f17
NOTICE: BL1: Booting BL31
INFO: Entry point address = 0x129000
INFO: SPSR = 0x3cd
INFO: Boot bl33 from 0x37000000 for 364311 Bytes
NOTICE: BL31: v1.3(debug):v1.3-372-g1ba9c60
NOTICE: BL31: Built : 17:51:33, Apr 30 2017
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x37000000
INFO: SPSR = 0x3c9
U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
Model: HiSilicon Poplar Development Board
BOARD: Hisilicon HI3798cv200 Poplar
DRAM: 1 GiB
MMC: Hisilicon DWMMC: 0
In: serial@f8b00000
Out: serial@f8b00000
Err: serial@f8b00000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 4 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
scanning usb for ethernet devices... 1 Ethernet Device(s) found
USB device 0:
Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
Type: Removable Hard Disk
Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
... is now current device
Scanning usb 0:1...
=>