arm-trusted-firmware/plat/ti/k3/common/k3_psci.c

96 lines
2.0 KiB
C
Raw Normal View History

/*
* Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch_helpers.h>
#include <assert.h>
#include <debug.h>
#include <k3_gicv3.h>
#include <psci.h>
#include <stdbool.h>
#define STUB() ERROR("stub %s called\n", __func__)
uintptr_t k3_sec_entrypoint;
static void k3_cpu_standby(plat_local_state_t cpu_state)
{
/*
* Enter standby state
* dsb is good practice before using wfi to enter low power states
*/
dsb();
wfi();
}
static int k3_pwr_domain_on(u_register_t mpidr)
{
sev();
/* TODO: Indicate to System firmware about powering up */
return PSCI_E_SUCCESS;
}
void k3_pwr_domain_off(const psci_power_state_t *target_state)
{
/* Prevent interrupts from spuriously waking up this cpu */
k3_gic_cpuif_disable();
/* TODO: Indicate to System firmware about powering down */
}
void k3_pwr_domain_on_finish(const psci_power_state_t *target_state)
{
/* TODO: Indicate to System firmware about completion */
k3_gic_pcpu_init();
k3_gic_cpuif_enable();
}
static void __dead2 k3_system_reset(void)
{
/* TODO: Indicate to System firmware about system reset */
STUB();
while (true)
wfi();
}
static int k3_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state)
{
/* TODO: perform the proper validation */
return PSCI_E_SUCCESS;
}
static int k3_validate_ns_entrypoint(uintptr_t entrypoint)
{
/* TODO: perform the proper validation */
return PSCI_E_SUCCESS;
}
static const plat_psci_ops_t k3_plat_psci_ops = {
.cpu_standby = k3_cpu_standby,
.pwr_domain_on = k3_pwr_domain_on,
.pwr_domain_off = k3_pwr_domain_off,
.pwr_domain_on_finish = k3_pwr_domain_on_finish,
.system_reset = k3_system_reset,
.validate_power_state = k3_validate_power_state,
.validate_ns_entrypoint = k3_validate_ns_entrypoint
};
int plat_setup_psci_ops(uintptr_t sec_entrypoint,
const plat_psci_ops_t **psci_ops)
{
k3_sec_entrypoint = sec_entrypoint;
*psci_ops = &k3_plat_psci_ops;
return 0;
}