plat: marvell: Add board support for A8K platform
Add support for A8K platform boards Change-Id: Ife025d930d2ab6cabbc13bbe19b2273cc1c938c8 Signed-off-by: Hanna Hawa <hannah@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
This commit is contained in:
parent
486f868bab
commit
34ec7ec310
|
@ -0,0 +1,89 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <arch_helpers.h>
|
||||||
|
#include <debug.h>
|
||||||
|
#include <mv_ddr_if.h>
|
||||||
|
#include <plat_marvell.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This function may modify the default DRAM parameters
|
||||||
|
* based on information received from SPD or bootloader
|
||||||
|
* configuration located on non volatile storage
|
||||||
|
*/
|
||||||
|
void plat_marvell_dram_update_topology(void)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This struct provides the DRAM training code with
|
||||||
|
* the appropriate board DRAM configuration
|
||||||
|
*/
|
||||||
|
static struct mv_ddr_topology_map board_topology_map = {
|
||||||
|
/* FIXME: MISL board 2CS 4Gb x8 devices of micron - 2133P */
|
||||||
|
DEBUG_LEVEL_ERROR,
|
||||||
|
0x1, /* active interfaces */
|
||||||
|
/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
|
||||||
|
{ { { {0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0} },
|
||||||
|
SPEED_BIN_DDR_2133P, /* speed_bin */
|
||||||
|
MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */
|
||||||
|
MV_DDR_DIE_CAP_4GBIT, /* die capacity */
|
||||||
|
MV_DDR_FREQ_SAR, /* frequency */
|
||||||
|
0, 0, /* cas_l, cas_wl */
|
||||||
|
MV_DDR_TEMP_LOW} }, /* temperature */
|
||||||
|
MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
|
||||||
|
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
|
||||||
|
{ {0} }, /* raw spd data */
|
||||||
|
{0}, /* timing parameters */
|
||||||
|
{ /* electrical configuration */
|
||||||
|
{ /* memory electrical configuration */
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */
|
||||||
|
{
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */
|
||||||
|
},
|
||||||
|
{
|
||||||
|
MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */
|
||||||
|
MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */
|
||||||
|
},
|
||||||
|
MV_DDR_DIC_RZQ_DIV7 /* dic */
|
||||||
|
},
|
||||||
|
{ /* phy electrical configuration */
|
||||||
|
MV_DDR_OHM_30, /* data_drv_p */
|
||||||
|
MV_DDR_OHM_30, /* data_drv_n */
|
||||||
|
MV_DDR_OHM_30, /* ctrl_drv_p */
|
||||||
|
MV_DDR_OHM_30, /* ctrl_drv_n */
|
||||||
|
{
|
||||||
|
MV_DDR_OHM_60, /* odt_p 1cs */
|
||||||
|
MV_DDR_OHM_120 /* odt_p 2cs */
|
||||||
|
},
|
||||||
|
{
|
||||||
|
MV_DDR_OHM_60, /* odt_n 1cs */
|
||||||
|
MV_DDR_OHM_120 /* odt_n 2cs */
|
||||||
|
},
|
||||||
|
},
|
||||||
|
{ /* mac electrical configuration */
|
||||||
|
MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */
|
||||||
|
MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */
|
||||||
|
MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */
|
||||||
|
},
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
|
||||||
|
{
|
||||||
|
/* Return the board topology as defined in the board code */
|
||||||
|
return &board_topology_map;
|
||||||
|
}
|
|
@ -0,0 +1,141 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <a8k_common.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* If bootrom is currently at BLE there's no need to include the memory
|
||||||
|
* maps structure at this point
|
||||||
|
*/
|
||||||
|
#include <mvebu_def.h>
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* AMB Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win amb_memory_map[] = {
|
||||||
|
/* CP0 SPI1 CS0 Direct Mode access */
|
||||||
|
{0xf900, 0x1000000, AMB_SPI1_CS0_ID},
|
||||||
|
};
|
||||||
|
|
||||||
|
int marvell_get_amb_memory_map(struct addr_map_win **win,
|
||||||
|
uint32_t *size, uintptr_t base)
|
||||||
|
{
|
||||||
|
*win = amb_memory_map;
|
||||||
|
if (*win == NULL)
|
||||||
|
*size = 0;
|
||||||
|
else
|
||||||
|
*size = ARRAY_SIZE(amb_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* IO_WIN Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win io_win_memory_map[] = {
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/* MCI 0 indirect window */
|
||||||
|
{MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
|
||||||
|
/* MCI 1 indirect window */
|
||||||
|
{MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID},
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
uint32_t marvell_get_io_win_gcr_target(int ap_index)
|
||||||
|
{
|
||||||
|
return PIDI_TID;
|
||||||
|
}
|
||||||
|
|
||||||
|
int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
|
||||||
|
uint32_t *size)
|
||||||
|
{
|
||||||
|
*win = io_win_memory_map;
|
||||||
|
if (*win == NULL)
|
||||||
|
*size = 0;
|
||||||
|
else
|
||||||
|
*size = ARRAY_SIZE(io_win_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/*****************************************************************************
|
||||||
|
* IOB Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win iob_memory_map[] = {
|
||||||
|
/* PEX1_X1 window */
|
||||||
|
{0x00000000f7000000, 0x1000000, PEX1_TID},
|
||||||
|
/* PEX2_X1 window */
|
||||||
|
{0x00000000f8000000, 0x1000000, PEX2_TID},
|
||||||
|
/* PEX0_X4 window */
|
||||||
|
{0x00000000f6000000, 0x1000000, PEX0_TID},
|
||||||
|
/* SPI1_CS0 (RUNIT) window */
|
||||||
|
{0x00000000f9000000, 0x1000000, RUNIT_TID},
|
||||||
|
};
|
||||||
|
|
||||||
|
int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
|
||||||
|
uintptr_t base)
|
||||||
|
{
|
||||||
|
*win = iob_memory_map;
|
||||||
|
*size = ARRAY_SIZE(iob_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* CCU Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win ccu_memory_map[] = { /* IO window */
|
||||||
|
#ifdef IMAGE_BLE
|
||||||
|
{0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
|
||||||
|
#else
|
||||||
|
{0x00000000f2000000, 0xe000000, IO_0_TID},
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
uint32_t marvell_get_ccu_gcr_target(int ap)
|
||||||
|
{
|
||||||
|
return DRAM_0_TID;
|
||||||
|
}
|
||||||
|
|
||||||
|
int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
|
||||||
|
uint32_t *size)
|
||||||
|
{
|
||||||
|
*win = ccu_memory_map;
|
||||||
|
*size = ARRAY_SIZE(ccu_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef IMAGE_BLE
|
||||||
|
/*****************************************************************************
|
||||||
|
* SKIP IMAGE Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
#if PLAT_RECOVERY_IMAGE_ENABLE
|
||||||
|
struct skip_image skip_im = {
|
||||||
|
.detection_method = GPIO,
|
||||||
|
.info.gpio.num = 33,
|
||||||
|
.info.gpio.button_state = HIGH,
|
||||||
|
.info.test.cp_ap = CP,
|
||||||
|
.info.test.cp_index = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
void *plat_marvell_get_skip_image_data(void)
|
||||||
|
{
|
||||||
|
/* Return the skip_image configurations */
|
||||||
|
return &skip_im;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif
|
|
@ -0,0 +1,15 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __MVEBU_DEF_H__
|
||||||
|
#define __MVEBU_DEF_H__
|
||||||
|
|
||||||
|
#include <a8k_plat_def.h>
|
||||||
|
|
||||||
|
#define CP_COUNT 1 /* A70x0 has single CP0 */
|
||||||
|
|
||||||
|
#endif /* __MVEBU_DEF_H__ */
|
|
@ -0,0 +1,16 @@
|
||||||
|
#
|
||||||
|
# Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
# https://spdx.org/licenses
|
||||||
|
#
|
||||||
|
|
||||||
|
PCI_EP_SUPPORT := 0
|
||||||
|
|
||||||
|
DOIMAGE_SEC := tools/doimage/secure/sec_img_7K.cfg
|
||||||
|
|
||||||
|
MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
|
||||||
|
|
||||||
|
include plat/marvell/a8k/common/a8k_common.mk
|
||||||
|
|
||||||
|
include plat/marvell/common/marvell_common.mk
|
|
@ -0,0 +1,89 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <arch_helpers.h>
|
||||||
|
#include <debug.h>
|
||||||
|
#include <mv_ddr_if.h>
|
||||||
|
#include <plat_marvell.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This function may modify the default DRAM parameters
|
||||||
|
* based on information received from SPD or bootloader
|
||||||
|
* configuration located on non volatile storage
|
||||||
|
*/
|
||||||
|
void plat_marvell_dram_update_topology(void)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This struct provides the DRAM training code with
|
||||||
|
* the appropriate board DRAM configuration
|
||||||
|
*/
|
||||||
|
static struct mv_ddr_topology_map board_topology_map = {
|
||||||
|
/* FIXME: MISL board 2CS 8Gb x8 devices of micron - 2133P */
|
||||||
|
DEBUG_LEVEL_ERROR,
|
||||||
|
0x1, /* active interfaces */
|
||||||
|
/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
|
||||||
|
{ { { {0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0},
|
||||||
|
{0x3, 0x2, 0, 0} },
|
||||||
|
SPEED_BIN_DDR_2400T, /* speed_bin */
|
||||||
|
MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */
|
||||||
|
MV_DDR_DIE_CAP_8GBIT, /* die capacity */
|
||||||
|
MV_DDR_FREQ_SAR, /* frequency */
|
||||||
|
0, 0, /* cas_l, cas_wl */
|
||||||
|
MV_DDR_TEMP_LOW} }, /* temperature */
|
||||||
|
MV_DDR_32BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
|
||||||
|
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
|
||||||
|
{ {0} }, /* raw spd data */
|
||||||
|
{0}, /* timing parameters */
|
||||||
|
{ /* electrical configuration */
|
||||||
|
{ /* memory electrical configuration */
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */
|
||||||
|
{
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */
|
||||||
|
},
|
||||||
|
{
|
||||||
|
MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */
|
||||||
|
MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */
|
||||||
|
},
|
||||||
|
MV_DDR_DIC_RZQ_DIV7 /* dic */
|
||||||
|
},
|
||||||
|
{ /* phy electrical configuration */
|
||||||
|
MV_DDR_OHM_30, /* data_drv_p */
|
||||||
|
MV_DDR_OHM_30, /* data_drv_n */
|
||||||
|
MV_DDR_OHM_30, /* ctrl_drv_p */
|
||||||
|
MV_DDR_OHM_30, /* ctrl_drv_n */
|
||||||
|
{
|
||||||
|
MV_DDR_OHM_60, /* odt_p 1cs */
|
||||||
|
MV_DDR_OHM_120 /* odt_p 2cs */
|
||||||
|
},
|
||||||
|
{
|
||||||
|
MV_DDR_OHM_60, /* odt_n 1cs */
|
||||||
|
MV_DDR_OHM_120 /* odt_n 2cs */
|
||||||
|
},
|
||||||
|
},
|
||||||
|
{ /* mac electrical configuration */
|
||||||
|
MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */
|
||||||
|
MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */
|
||||||
|
MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */
|
||||||
|
},
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
|
||||||
|
{
|
||||||
|
/* Return the board topology as defined in the board code */
|
||||||
|
return &board_topology_map;
|
||||||
|
}
|
|
@ -0,0 +1,142 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <a8k_common.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* If bootrom is currently at BLE there's no need to include the memory
|
||||||
|
* maps structure at this point
|
||||||
|
*/
|
||||||
|
#include <mvebu_def.h>
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* AMB Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win *amb_memory_map;
|
||||||
|
|
||||||
|
int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
|
||||||
|
uintptr_t base)
|
||||||
|
{
|
||||||
|
*win = amb_memory_map;
|
||||||
|
if (*win == NULL)
|
||||||
|
*size = 0;
|
||||||
|
else
|
||||||
|
*size = ARRAY_SIZE(amb_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* IO WIN Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win io_win_memory_map[] = {
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/* MCI 0 indirect window */
|
||||||
|
{MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
|
||||||
|
/* MCI 1 indirect window */
|
||||||
|
{MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID},
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
uint32_t marvell_get_io_win_gcr_target(int ap_index)
|
||||||
|
{
|
||||||
|
return PIDI_TID;
|
||||||
|
}
|
||||||
|
|
||||||
|
int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
|
||||||
|
uint32_t *size)
|
||||||
|
{
|
||||||
|
*win = io_win_memory_map;
|
||||||
|
if (*win == NULL)
|
||||||
|
*size = 0;
|
||||||
|
else
|
||||||
|
*size = ARRAY_SIZE(io_win_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/*****************************************************************************
|
||||||
|
* IOB Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win iob_memory_map[] = {
|
||||||
|
/* PEX0_X4 window */
|
||||||
|
{0x00000000f6000000, 0x6000000, PEX0_TID},
|
||||||
|
{0x00000000c0000000, 0x30000000, PEX0_TID},
|
||||||
|
{0x0000000800000000, 0x200000000, PEX0_TID},
|
||||||
|
};
|
||||||
|
|
||||||
|
int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
|
||||||
|
uintptr_t base)
|
||||||
|
{
|
||||||
|
*win = iob_memory_map;
|
||||||
|
*size = ARRAY_SIZE(iob_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* CCU Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win ccu_memory_map[] = {
|
||||||
|
#ifdef IMAGE_BLE
|
||||||
|
{0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
|
||||||
|
#else
|
||||||
|
{0x00000000f2000000, 0xe000000, IO_0_TID},
|
||||||
|
{0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
|
||||||
|
{0x0000000800000000, 0x200000000, IO_0_TID}, /* IO window */
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
uint32_t marvell_get_ccu_gcr_target(int ap)
|
||||||
|
{
|
||||||
|
return DRAM_0_TID;
|
||||||
|
}
|
||||||
|
|
||||||
|
int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
|
||||||
|
uint32_t *size)
|
||||||
|
{
|
||||||
|
*win = ccu_memory_map;
|
||||||
|
*size = ARRAY_SIZE(ccu_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef IMAGE_BLE
|
||||||
|
|
||||||
|
struct pci_hw_cfg *plat_get_pcie_hw_data(void)
|
||||||
|
{
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* SKIP IMAGE Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
#if PLAT_RECOVERY_IMAGE_ENABLE
|
||||||
|
struct skip_image skip_im = {
|
||||||
|
.detection_method = GPIO,
|
||||||
|
.info.gpio.num = 33,
|
||||||
|
.info.gpio.button_state = HIGH,
|
||||||
|
.info.test.cp_ap = CP,
|
||||||
|
.info.test.cp_index = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
void *plat_marvell_get_skip_image_data(void)
|
||||||
|
{
|
||||||
|
/* Return the skip_image configurations */
|
||||||
|
return &skip_im;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif
|
|
@ -0,0 +1,31 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __MVEBU_DEF_H__
|
||||||
|
#define __MVEBU_DEF_H__
|
||||||
|
|
||||||
|
#include <a8k_plat_def.h>
|
||||||
|
|
||||||
|
#define CP_COUNT 1 /* A70x0 has single CP0 */
|
||||||
|
|
||||||
|
/***********************************************************************
|
||||||
|
* Required platform porting definitions common to all
|
||||||
|
* Management Compute SubSystems (MSS)
|
||||||
|
***********************************************************************
|
||||||
|
*/
|
||||||
|
/*
|
||||||
|
* Load address of SCP_BL2
|
||||||
|
* SCP_BL2 is loaded to the same place as BL31.
|
||||||
|
* Once SCP_BL2 is transferred to the SCP,
|
||||||
|
* it is discarded and BL31 is loaded over the top.
|
||||||
|
*/
|
||||||
|
#ifdef SCP_IMAGE
|
||||||
|
#define SCP_BL2_BASE BL31_BASE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
#endif /* __MVEBU_DEF_H__ */
|
|
@ -0,0 +1,16 @@
|
||||||
|
#
|
||||||
|
# Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
# https://spdx.org/licenses
|
||||||
|
#
|
||||||
|
|
||||||
|
PCI_EP_SUPPORT := 0
|
||||||
|
|
||||||
|
DOIMAGE_SEC := tools/doimage/secure/sec_img_7K.cfg
|
||||||
|
|
||||||
|
MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
|
||||||
|
|
||||||
|
include plat/marvell/a8k/common/a8k_common.mk
|
||||||
|
|
||||||
|
include plat/marvell/common/marvell_common.mk
|
|
@ -0,0 +1,141 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <arch_helpers.h>
|
||||||
|
#include <a8k_i2c.h>
|
||||||
|
#include <debug.h>
|
||||||
|
#include <mmio.h>
|
||||||
|
#include <mv_ddr_if.h>
|
||||||
|
#include <mvebu_def.h>
|
||||||
|
#include <plat_marvell.h>
|
||||||
|
|
||||||
|
#define MVEBU_AP_MPP_CTRL0_7_REG MVEBU_AP_MPP_REGS(0)
|
||||||
|
#define MVEBU_AP_MPP_CTRL4_OFFS 16
|
||||||
|
#define MVEBU_AP_MPP_CTRL5_OFFS 20
|
||||||
|
#define MVEBU_AP_MPP_CTRL4_I2C0_SDA_ENA 0x3
|
||||||
|
#define MVEBU_AP_MPP_CTRL5_I2C0_SCK_ENA 0x3
|
||||||
|
|
||||||
|
#define MVEBU_CP_MPP_CTRL37_OFFS 20
|
||||||
|
#define MVEBU_CP_MPP_CTRL38_OFFS 24
|
||||||
|
#define MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA 0x2
|
||||||
|
#define MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA 0x2
|
||||||
|
|
||||||
|
#define MVEBU_MPP_CTRL_MASK 0xf
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This struct provides the DRAM training code with
|
||||||
|
* the appropriate board DRAM configuration
|
||||||
|
*/
|
||||||
|
static struct mv_ddr_topology_map board_topology_map = {
|
||||||
|
/* MISL board with 1CS 8Gb x4 devices of Micron 2400T */
|
||||||
|
DEBUG_LEVEL_ERROR,
|
||||||
|
0x1, /* active interfaces */
|
||||||
|
/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
|
||||||
|
{ { { {0x1, 0x0, 0, 0}, /* FIXME: change the cs mask for all 64 bit */
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0} },
|
||||||
|
/* TODO: double check if the speed bin is 2400T */
|
||||||
|
SPEED_BIN_DDR_2400T, /* speed_bin */
|
||||||
|
MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */
|
||||||
|
MV_DDR_DIE_CAP_8GBIT, /* die capacity */
|
||||||
|
MV_DDR_FREQ_SAR, /* frequency */
|
||||||
|
0, 0, /* cas_l, cas_wl */
|
||||||
|
MV_DDR_TEMP_LOW} }, /* temperature */
|
||||||
|
MV_DDR_64BIT_ECC_PUP8_BUS_MASK, /* subphys mask */
|
||||||
|
MV_DDR_CFG_SPD, /* ddr configuration data source */
|
||||||
|
{ {0} }, /* raw spd data */
|
||||||
|
{0}, /* timing parameters */
|
||||||
|
{ /* electrical configuration */
|
||||||
|
{ /* memory electrical configuration */
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */
|
||||||
|
{
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */
|
||||||
|
},
|
||||||
|
{
|
||||||
|
MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */
|
||||||
|
MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */
|
||||||
|
},
|
||||||
|
MV_DDR_DIC_RZQ_DIV7 /* dic */
|
||||||
|
},
|
||||||
|
{ /* phy electrical configuration */
|
||||||
|
MV_DDR_OHM_30, /* data_drv_p */
|
||||||
|
MV_DDR_OHM_30, /* data_drv_n */
|
||||||
|
MV_DDR_OHM_30, /* ctrl_drv_p */
|
||||||
|
MV_DDR_OHM_30, /* ctrl_drv_n */
|
||||||
|
{
|
||||||
|
MV_DDR_OHM_60, /* odt_p 1cs */
|
||||||
|
MV_DDR_OHM_120 /* odt_p 2cs */
|
||||||
|
},
|
||||||
|
{
|
||||||
|
MV_DDR_OHM_60, /* odt_n 1cs */
|
||||||
|
MV_DDR_OHM_120 /* odt_n 2cs */
|
||||||
|
},
|
||||||
|
},
|
||||||
|
{ /* mac electrical configuration */
|
||||||
|
MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */
|
||||||
|
MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */
|
||||||
|
MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */
|
||||||
|
},
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
|
||||||
|
{
|
||||||
|
/* Return the board topology as defined in the board code */
|
||||||
|
return &board_topology_map;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void mpp_config(void)
|
||||||
|
{
|
||||||
|
uintptr_t reg;
|
||||||
|
uint32_t val;
|
||||||
|
|
||||||
|
reg = MVEBU_CP_MPP_REGS(0, 4);
|
||||||
|
/* configure CP0 MPP 37 and 38 to i2c */
|
||||||
|
val = mmio_read_32(reg);
|
||||||
|
val &= ~((MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL37_OFFS) |
|
||||||
|
(MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL38_OFFS));
|
||||||
|
val |= (MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA <<
|
||||||
|
MVEBU_CP_MPP_CTRL37_OFFS) |
|
||||||
|
(MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA <<
|
||||||
|
MVEBU_CP_MPP_CTRL38_OFFS);
|
||||||
|
mmio_write_32(reg, val);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This function may modify the default DRAM parameters
|
||||||
|
* based on information received from SPD or bootloader
|
||||||
|
* configuration located on non volatile storage
|
||||||
|
*/
|
||||||
|
void plat_marvell_dram_update_topology(void)
|
||||||
|
{
|
||||||
|
struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
|
||||||
|
|
||||||
|
INFO("Gathering DRAM information\n");
|
||||||
|
|
||||||
|
if (tm->cfg_src == MV_DDR_CFG_SPD) {
|
||||||
|
/* configure MPPs to enable i2c */
|
||||||
|
mpp_config();
|
||||||
|
|
||||||
|
/* initialize i2c */
|
||||||
|
i2c_init((void *)MVEBU_CP0_I2C_BASE);
|
||||||
|
|
||||||
|
/* select SPD memory page 0 to access DRAM configuration */
|
||||||
|
i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
|
||||||
|
|
||||||
|
/* read data from spd */
|
||||||
|
i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
|
||||||
|
sizeof(tm->spd_data.all_bytes));
|
||||||
|
}
|
||||||
|
}
|
|
@ -0,0 +1,191 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <a8k_common.h>
|
||||||
|
/*
|
||||||
|
* If bootrom is currently at BLE there's no need to include the memory
|
||||||
|
* maps structure at this point
|
||||||
|
*/
|
||||||
|
#include <mvebu_def.h>
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* AMB Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win amb_memory_map[] = {
|
||||||
|
/* CP1 SPI1 CS0 Direct Mode access */
|
||||||
|
{0xf900, 0x1000000, AMB_SPI1_CS0_ID},
|
||||||
|
};
|
||||||
|
|
||||||
|
int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
|
||||||
|
uintptr_t base)
|
||||||
|
{
|
||||||
|
*win = amb_memory_map;
|
||||||
|
if (*win == NULL)
|
||||||
|
*size = 0;
|
||||||
|
else
|
||||||
|
*size = ARRAY_SIZE(amb_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* IO WIN Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win io_win_memory_map[] = {
|
||||||
|
/* CP1 (MCI0) internal regs */
|
||||||
|
{0x00000000f4000000, 0x2000000, MCI_0_TID},
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/* PCIe0 and SPI1_CS0 (RUNIT) on CP1*/
|
||||||
|
{0x00000000f9000000, 0x2000000, MCI_0_TID},
|
||||||
|
/* PCIe1 on CP1*/
|
||||||
|
{0x00000000fb000000, 0x1000000, MCI_0_TID},
|
||||||
|
/* PCIe2 on CP1*/
|
||||||
|
{0x00000000fc000000, 0x1000000, MCI_0_TID},
|
||||||
|
/* MCI 0 indirect window */
|
||||||
|
{MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
|
||||||
|
/* MCI 1 indirect window */
|
||||||
|
{MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID},
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
uint32_t marvell_get_io_win_gcr_target(int ap_index)
|
||||||
|
{
|
||||||
|
return PIDI_TID;
|
||||||
|
}
|
||||||
|
|
||||||
|
int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
|
||||||
|
uint32_t *size)
|
||||||
|
{
|
||||||
|
*win = io_win_memory_map;
|
||||||
|
if (*win == NULL)
|
||||||
|
*size = 0;
|
||||||
|
else
|
||||||
|
*size = ARRAY_SIZE(io_win_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/*****************************************************************************
|
||||||
|
* IOB Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win iob_memory_map_cp0[] = {
|
||||||
|
/* CP0 */
|
||||||
|
/* PEX1_X1 window */
|
||||||
|
{0x00000000f7000000, 0x1000000, PEX1_TID},
|
||||||
|
/* PEX2_X1 window */
|
||||||
|
{0x00000000f8000000, 0x1000000, PEX2_TID},
|
||||||
|
/* PEX0_X4 window */
|
||||||
|
{0x00000000f6000000, 0x1000000, PEX0_TID}
|
||||||
|
};
|
||||||
|
|
||||||
|
struct addr_map_win iob_memory_map_cp1[] = {
|
||||||
|
/* CP1 */
|
||||||
|
/* SPI1_CS0 (RUNIT) window */
|
||||||
|
{0x00000000f9000000, 0x1000000, RUNIT_TID},
|
||||||
|
/* PEX1_X1 window */
|
||||||
|
{0x00000000fb000000, 0x1000000, PEX1_TID},
|
||||||
|
/* PEX2_X1 window */
|
||||||
|
{0x00000000fc000000, 0x1000000, PEX2_TID},
|
||||||
|
/* PEX0_X4 window */
|
||||||
|
{0x00000000fa000000, 0x1000000, PEX0_TID}
|
||||||
|
};
|
||||||
|
|
||||||
|
int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
|
||||||
|
uintptr_t base)
|
||||||
|
{
|
||||||
|
switch (base) {
|
||||||
|
case MVEBU_CP_REGS_BASE(0):
|
||||||
|
*win = iob_memory_map_cp0;
|
||||||
|
*size = ARRAY_SIZE(iob_memory_map_cp0);
|
||||||
|
return 0;
|
||||||
|
case MVEBU_CP_REGS_BASE(1):
|
||||||
|
*win = iob_memory_map_cp1;
|
||||||
|
*size = ARRAY_SIZE(iob_memory_map_cp1);
|
||||||
|
return 0;
|
||||||
|
default:
|
||||||
|
*size = 0;
|
||||||
|
*win = 0;
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* CCU Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win ccu_memory_map[] = {
|
||||||
|
#ifdef IMAGE_BLE
|
||||||
|
{0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
|
||||||
|
#else
|
||||||
|
{0x00000000f2000000, 0xe000000, IO_0_TID}, /* IO window */
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
uint32_t marvell_get_ccu_gcr_target(int ap)
|
||||||
|
{
|
||||||
|
return DRAM_0_TID;
|
||||||
|
}
|
||||||
|
|
||||||
|
int marvell_get_ccu_memory_map(int ap, struct addr_map_win **win,
|
||||||
|
uint32_t *size)
|
||||||
|
{
|
||||||
|
*win = ccu_memory_map;
|
||||||
|
*size = ARRAY_SIZE(ccu_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/*****************************************************************************
|
||||||
|
* SoC PM configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
/* CP GPIO should be used and the GPIOs should be within same GPIO register */
|
||||||
|
struct power_off_method pm_cfg = {
|
||||||
|
.type = PMIC_GPIO,
|
||||||
|
.cfg.gpio.pin_count = 1,
|
||||||
|
.cfg.gpio.info = {{0, 35} },
|
||||||
|
.cfg.gpio.step_count = 7,
|
||||||
|
.cfg.gpio.seq = {1, 0, 1, 0, 1, 0, 1},
|
||||||
|
.cfg.gpio.delay_ms = 10,
|
||||||
|
};
|
||||||
|
|
||||||
|
void *plat_marvell_get_pm_cfg(void)
|
||||||
|
{
|
||||||
|
/* Return the PM configurations */
|
||||||
|
return &pm_cfg;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* In reference to #ifndef IMAGE_BLE, this part is used for BLE only. */
|
||||||
|
#else
|
||||||
|
/*****************************************************************************
|
||||||
|
* SKIP IMAGE Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
#if PLAT_RECOVERY_IMAGE_ENABLE
|
||||||
|
struct skip_image skip_im = {
|
||||||
|
.detection_method = GPIO,
|
||||||
|
.info.gpio.num = 33,
|
||||||
|
.info.gpio.button_state = HIGH,
|
||||||
|
.info.test.cp_ap = CP,
|
||||||
|
.info.test.cp_index = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
void *plat_marvell_get_skip_image_data(void)
|
||||||
|
{
|
||||||
|
/* Return the skip_image configurations */
|
||||||
|
return &skip_im;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif
|
|
@ -0,0 +1,17 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __MVEBU_DEF_H__
|
||||||
|
#define __MVEBU_DEF_H__
|
||||||
|
|
||||||
|
#include <a8k_plat_def.h>
|
||||||
|
|
||||||
|
#define CP_COUNT 2 /* A80x0 has both CP0 & CP1 */
|
||||||
|
#define I2C_SPD_ADDR 0x53 /* Access SPD data */
|
||||||
|
#define I2C_SPD_P0_ADDR 0x36 /* Select SPD data page 0 */
|
||||||
|
|
||||||
|
#endif /* __MVEBU_DEF_H__ */
|
|
@ -0,0 +1,16 @@
|
||||||
|
#
|
||||||
|
# Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
# https://spdx.org/licenses
|
||||||
|
#
|
||||||
|
|
||||||
|
PCI_EP_SUPPORT := 0
|
||||||
|
|
||||||
|
DOIMAGE_SEC := tools/doimage/secure/sec_img_8K.cfg
|
||||||
|
|
||||||
|
MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
|
||||||
|
|
||||||
|
include plat/marvell/a8k/common/a8k_common.mk
|
||||||
|
|
||||||
|
include plat/marvell/common/marvell_common.mk
|
|
@ -0,0 +1,129 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <arch_helpers.h>
|
||||||
|
#include <a8k_i2c.h>
|
||||||
|
#include <debug.h>
|
||||||
|
#include <mmio.h>
|
||||||
|
#include <mv_ddr_if.h>
|
||||||
|
#include <mvebu_def.h>
|
||||||
|
#include <plat_marvell.h>
|
||||||
|
|
||||||
|
#define MVEBU_CP_MPP_CTRL37_OFFS 20
|
||||||
|
#define MVEBU_CP_MPP_CTRL38_OFFS 24
|
||||||
|
#define MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA 0x2
|
||||||
|
#define MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA 0x2
|
||||||
|
|
||||||
|
#define MVEBU_MPP_CTRL_MASK 0xf
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This struct provides the DRAM training code with
|
||||||
|
* the appropriate board DRAM configuration
|
||||||
|
*/
|
||||||
|
static struct mv_ddr_topology_map board_topology_map = {
|
||||||
|
/* Board with 1CS 8Gb x4 devices of Micron 2400T */
|
||||||
|
DEBUG_LEVEL_ERROR,
|
||||||
|
0x1, /* active interfaces */
|
||||||
|
/* cs_mask, mirror, dqs_swap, ck_swap X subphys */
|
||||||
|
{ { { {0x1, 0x0, 0, 0}, /* FIXME: change the cs mask for all 64 bit */
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0},
|
||||||
|
{0x1, 0x0, 0, 0} },
|
||||||
|
/* TODO: double check if the speed bin is 2400T */
|
||||||
|
SPEED_BIN_DDR_2400T, /* speed_bin */
|
||||||
|
MV_DDR_DEV_WIDTH_8BIT, /* sdram device width */
|
||||||
|
MV_DDR_DIE_CAP_8GBIT, /* die capacity */
|
||||||
|
MV_DDR_FREQ_SAR, /* frequency */
|
||||||
|
0, 0, /* cas_l, cas_wl */
|
||||||
|
MV_DDR_TEMP_LOW} }, /* temperature */
|
||||||
|
MV_DDR_64BIT_BUS_MASK, /* subphys mask */
|
||||||
|
MV_DDR_CFG_SPD, /* ddr configuration data source */
|
||||||
|
{ {0} }, /* raw spd data */
|
||||||
|
{0}, /* timing parameters */
|
||||||
|
{ /* electrical configuration */
|
||||||
|
{ /* memory electrical configuration */
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, /* rtt_nom */
|
||||||
|
{
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* rtt_park 1cs */
|
||||||
|
MV_DDR_RTT_NOM_PARK_RZQ_DIV1 /* rtt_park 2cs */
|
||||||
|
},
|
||||||
|
{
|
||||||
|
MV_DDR_RTT_WR_DYN_ODT_OFF, /* rtt_wr 1cs */
|
||||||
|
MV_DDR_RTT_WR_RZQ_DIV2 /* rtt_wr 2cs */
|
||||||
|
},
|
||||||
|
MV_DDR_DIC_RZQ_DIV7 /* dic */
|
||||||
|
},
|
||||||
|
{ /* phy electrical configuration */
|
||||||
|
MV_DDR_OHM_30, /* data_drv_p */
|
||||||
|
MV_DDR_OHM_30, /* data_drv_n */
|
||||||
|
MV_DDR_OHM_30, /* ctrl_drv_p */
|
||||||
|
MV_DDR_OHM_30, /* ctrl_drv_n */
|
||||||
|
{
|
||||||
|
MV_DDR_OHM_60, /* odt_p 1cs */
|
||||||
|
MV_DDR_OHM_120 /* odt_p 2cs */
|
||||||
|
},
|
||||||
|
{
|
||||||
|
MV_DDR_OHM_60, /* odt_n 1cs */
|
||||||
|
MV_DDR_OHM_120 /* odt_n 2cs */
|
||||||
|
},
|
||||||
|
},
|
||||||
|
{ /* mac electrical configuration */
|
||||||
|
MV_DDR_ODT_CFG_NORMAL, /* odtcfg_pattern */
|
||||||
|
MV_DDR_ODT_CFG_ALWAYS_ON, /* odtcfg_write */
|
||||||
|
MV_DDR_ODT_CFG_NORMAL, /* odtcfg_read */
|
||||||
|
},
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
|
||||||
|
{
|
||||||
|
/* Return the board topology as defined in the board code */
|
||||||
|
return &board_topology_map;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void mpp_config(void)
|
||||||
|
{
|
||||||
|
uint32_t val;
|
||||||
|
uintptr_t reg = MVEBU_CP_MPP_REGS(0, 4);
|
||||||
|
|
||||||
|
/* configure CP0 MPP 37 and 38 to i2c */
|
||||||
|
val = mmio_read_32(reg);
|
||||||
|
val &= ~((MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL37_OFFS) |
|
||||||
|
(MVEBU_MPP_CTRL_MASK << MVEBU_CP_MPP_CTRL38_OFFS));
|
||||||
|
val |= (MVEBU_CP_MPP_CTRL37_I2C0_SCK_ENA << MVEBU_CP_MPP_CTRL37_OFFS) |
|
||||||
|
(MVEBU_CP_MPP_CTRL38_I2C0_SDA_ENA << MVEBU_CP_MPP_CTRL38_OFFS);
|
||||||
|
mmio_write_32(reg, val);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This function may modify the default DRAM parameters
|
||||||
|
* based on information received from SPD or bootloader
|
||||||
|
* configuration located on non volatile storage
|
||||||
|
*/
|
||||||
|
void plat_marvell_dram_update_topology(void)
|
||||||
|
{
|
||||||
|
struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
|
||||||
|
|
||||||
|
INFO("Gathering DRAM information\n");
|
||||||
|
|
||||||
|
if (tm->cfg_src == MV_DDR_CFG_SPD) {
|
||||||
|
/* configure MPPs to enable i2c */
|
||||||
|
mpp_config();
|
||||||
|
/* initialize the i2c */
|
||||||
|
i2c_init((void *)MVEBU_CP0_I2C_BASE);
|
||||||
|
/* select SPD memory page 0 to access DRAM configuration */
|
||||||
|
i2c_write(I2C_SPD_P0_ADDR, 0x0, 1, tm->spd_data.all_bytes, 1);
|
||||||
|
/* read data from spd */
|
||||||
|
i2c_read(I2C_SPD_ADDR, 0x0, 1, tm->spd_data.all_bytes,
|
||||||
|
sizeof(tm->spd_data.all_bytes));
|
||||||
|
}
|
||||||
|
}
|
|
@ -0,0 +1,196 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <a8k_common.h>
|
||||||
|
#include <delay_timer.h>
|
||||||
|
#include <mmio.h>
|
||||||
|
/*
|
||||||
|
* If bootrom is currently at BLE there's no need to include the memory
|
||||||
|
* maps structure at this point
|
||||||
|
*/
|
||||||
|
#include <mvebu_def.h>
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* GPIO Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
#define MPP_CONTROL_REGISTER 0xf2440018
|
||||||
|
#define MPP_CONTROL_MPP_SEL_52_MASK 0xf0000
|
||||||
|
#define GPIO_DATA_OUT1_REGISTER 0xf2440140
|
||||||
|
#define GPIO_DATA_OUT_EN_CTRL1_REGISTER 0xf2440144
|
||||||
|
#define GPIO52_MASK 0x100000
|
||||||
|
|
||||||
|
/* Reset PCIe via GPIO number 52 */
|
||||||
|
int marvell_gpio_config(void)
|
||||||
|
{
|
||||||
|
uint32_t reg;
|
||||||
|
|
||||||
|
reg = mmio_read_32(MPP_CONTROL_REGISTER);
|
||||||
|
reg |= MPP_CONTROL_MPP_SEL_52_MASK;
|
||||||
|
mmio_write_32(MPP_CONTROL_REGISTER, reg);
|
||||||
|
|
||||||
|
reg = mmio_read_32(GPIO_DATA_OUT1_REGISTER);
|
||||||
|
reg |= GPIO52_MASK;
|
||||||
|
mmio_write_32(GPIO_DATA_OUT1_REGISTER, reg);
|
||||||
|
|
||||||
|
reg = mmio_read_32(GPIO_DATA_OUT_EN_CTRL1_REGISTER);
|
||||||
|
reg &= ~GPIO52_MASK;
|
||||||
|
mmio_write_32(GPIO_DATA_OUT_EN_CTRL1_REGISTER, reg);
|
||||||
|
udelay(100);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* AMB Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win amb_memory_map[] = {
|
||||||
|
/* CP1 SPI1 CS0 Direct Mode access */
|
||||||
|
{0xf900, 0x1000000, AMB_SPI1_CS0_ID},
|
||||||
|
};
|
||||||
|
|
||||||
|
int marvell_get_amb_memory_map(struct addr_map_win **win, uint32_t *size,
|
||||||
|
uintptr_t base)
|
||||||
|
{
|
||||||
|
*win = amb_memory_map;
|
||||||
|
if (*win == NULL)
|
||||||
|
*size = 0;
|
||||||
|
else
|
||||||
|
*size = ARRAY_SIZE(amb_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* IO WIN Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win io_win_memory_map[] = {
|
||||||
|
/* CP1 (MCI0) internal regs */
|
||||||
|
{0x00000000f4000000, 0x2000000, MCI_0_TID},
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/* PCIe0 and SPI1_CS0 (RUNIT) on CP1*/
|
||||||
|
{0x00000000f9000000, 0x2000000, MCI_0_TID},
|
||||||
|
/* PCIe1 on CP1*/
|
||||||
|
{0x00000000fb000000, 0x1000000, MCI_0_TID},
|
||||||
|
/* PCIe2 on CP1*/
|
||||||
|
{0x00000000fc000000, 0x1000000, MCI_0_TID},
|
||||||
|
/* MCI 0 indirect window */
|
||||||
|
{MVEBU_MCI_REG_BASE_REMAP(0), 0x100000, MCI_0_TID},
|
||||||
|
/* MCI 1 indirect window */
|
||||||
|
{MVEBU_MCI_REG_BASE_REMAP(1), 0x100000, MCI_1_TID},
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
uint32_t marvell_get_io_win_gcr_target(int ap_index)
|
||||||
|
{
|
||||||
|
return PIDI_TID;
|
||||||
|
}
|
||||||
|
|
||||||
|
int marvell_get_io_win_memory_map(int ap_index, struct addr_map_win **win,
|
||||||
|
uint32_t *size)
|
||||||
|
{
|
||||||
|
*win = io_win_memory_map;
|
||||||
|
if (*win == NULL)
|
||||||
|
*size = 0;
|
||||||
|
else
|
||||||
|
*size = ARRAY_SIZE(io_win_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifndef IMAGE_BLE
|
||||||
|
/*****************************************************************************
|
||||||
|
* IOB Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win iob_memory_map_cp0[] = {
|
||||||
|
/* CP0 */
|
||||||
|
/* PEX1_X1 window */
|
||||||
|
{0x00000000f7000000, 0x1000000, PEX1_TID},
|
||||||
|
/* PEX2_X1 window */
|
||||||
|
{0x00000000f8000000, 0x1000000, PEX2_TID},
|
||||||
|
/* PEX0_X4 window */
|
||||||
|
{0x00000000f6000000, 0x1000000, PEX0_TID},
|
||||||
|
{0x00000000c0000000, 0x30000000, PEX0_TID},
|
||||||
|
{0x0000000800000000, 0x100000000, PEX0_TID},
|
||||||
|
};
|
||||||
|
|
||||||
|
struct addr_map_win iob_memory_map_cp1[] = {
|
||||||
|
/* CP1 */
|
||||||
|
/* SPI1_CS0 (RUNIT) window */
|
||||||
|
{0x00000000f9000000, 0x1000000, RUNIT_TID},
|
||||||
|
/* PEX1_X1 window */
|
||||||
|
{0x00000000fb000000, 0x1000000, PEX1_TID},
|
||||||
|
/* PEX2_X1 window */
|
||||||
|
{0x00000000fc000000, 0x1000000, PEX2_TID},
|
||||||
|
/* PEX0_X4 window */
|
||||||
|
{0x00000000fa000000, 0x1000000, PEX0_TID}
|
||||||
|
};
|
||||||
|
|
||||||
|
int marvell_get_iob_memory_map(struct addr_map_win **win, uint32_t *size,
|
||||||
|
uintptr_t base)
|
||||||
|
{
|
||||||
|
switch (base) {
|
||||||
|
case MVEBU_CP_REGS_BASE(0):
|
||||||
|
*win = iob_memory_map_cp0;
|
||||||
|
*size = ARRAY_SIZE(iob_memory_map_cp0);
|
||||||
|
return 0;
|
||||||
|
case MVEBU_CP_REGS_BASE(1):
|
||||||
|
*win = iob_memory_map_cp1;
|
||||||
|
*size = ARRAY_SIZE(iob_memory_map_cp1);
|
||||||
|
return 0;
|
||||||
|
default:
|
||||||
|
*size = 0;
|
||||||
|
*win = 0;
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* CCU Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
struct addr_map_win ccu_memory_map[] = {
|
||||||
|
#ifdef IMAGE_BLE
|
||||||
|
{0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
|
||||||
|
#else
|
||||||
|
{0x00000000f2000000, 0xe000000, IO_0_TID}, /* IO window */
|
||||||
|
{0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
|
||||||
|
{0x0000000800000000, 0x100000000, IO_0_TID}, /* IO window */
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
uint32_t marvell_get_ccu_gcr_target(int ap)
|
||||||
|
{
|
||||||
|
return DRAM_0_TID;
|
||||||
|
}
|
||||||
|
|
||||||
|
int marvell_get_ccu_memory_map(int ap_index, struct addr_map_win **win,
|
||||||
|
uint32_t *size)
|
||||||
|
{
|
||||||
|
*win = ccu_memory_map;
|
||||||
|
*size = ARRAY_SIZE(ccu_memory_map);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* In reference to #ifndef IMAGE_BLE, this part is used for BLE only. */
|
||||||
|
|
||||||
|
/*****************************************************************************
|
||||||
|
* SKIP IMAGE Configuration
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
void *plat_marvell_get_skip_image_data(void)
|
||||||
|
{
|
||||||
|
/* No recovery button on A8k-MCBIN board */
|
||||||
|
return NULL;
|
||||||
|
}
|
|
@ -0,0 +1,17 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
* https://spdx.org/licenses
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __MVEBU_DEF_H__
|
||||||
|
#define __MVEBU_DEF_H__
|
||||||
|
|
||||||
|
#include <a8k_plat_def.h>
|
||||||
|
|
||||||
|
#define CP_COUNT 2 /* A80x0 has both CP0 & CP1 */
|
||||||
|
#define I2C_SPD_ADDR 0x53 /* Access SPD data */
|
||||||
|
#define I2C_SPD_P0_ADDR 0x36 /* Select SPD data page 0 */
|
||||||
|
|
||||||
|
#endif /* __MVEBU_DEF_H__ */
|
|
@ -0,0 +1,16 @@
|
||||||
|
#
|
||||||
|
# Copyright (C) 2018 Marvell International Ltd.
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: BSD-3-Clause
|
||||||
|
# https://spdx.org/licenses
|
||||||
|
#
|
||||||
|
|
||||||
|
PCI_EP_SUPPORT := 0
|
||||||
|
|
||||||
|
DOIMAGE_SEC := tools/doimage/secure/sec_img_8K.cfg
|
||||||
|
|
||||||
|
MARVELL_MOCHI_DRV := drivers/marvell/mochi/apn806_setup.c
|
||||||
|
|
||||||
|
include plat/marvell/a8k/common/a8k_common.mk
|
||||||
|
|
||||||
|
include plat/marvell/common/marvell_common.mk
|
Loading…
Reference in New Issue