fdts: stm32mp1: add the I2C2 peripheral in the SoC DTS
Some STM32MP1‐based boards, like Seeed Studio’s SoM‐STM32MP157C, have the SoC connected to the PMIC via I2C2 instead of I2C4 (which is used on the official ST development boards). This commit brings TF‑A one step closer to boot on such boards. Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Change-Id: Iec9c80f29ce95496e8f1b079b7a23f1914b74901
This commit is contained in:
parent
8078b5c5a0
commit
3ef2208b6a
|
@ -121,6 +121,21 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c@40013000 {
|
||||
compatible = "st,stm32mp15-i2c";
|
||||
reg = <0x40013000 0x400>;
|
||||
interrupt-names = "event", "error";
|
||||
interrupts = <&exti 22 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rcc I2C2_K>;
|
||||
resets = <&rcc I2C2_R>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
st,syscfg-fmp = <&syscfg 0x4 0x2>;
|
||||
wakeup-source;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart7: serial@40018000 {
|
||||
compatible = "st,stm32h7-uart";
|
||||
reg = <0x40018000 0x400>;
|
||||
|
|
Loading…
Reference in New Issue