poplar: Use new console APIs

Switch to the new console APIs enabled by setting MULTI_CONSOLE_API=1.
Enables building with ERROR_DEPRECATED=1.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>

plat/hisilicon/poplar/bl1_plat_setup.c

@@ -7,13 +7,13 @@
 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl_common.h>
-#include <console.h>
 #include <debug.h>
 #include <dw_mmc.h>
 #include <errno.h>
 #include <generic_delay_timer.h>
 #include <mmc.h>
 #include <mmio.h>
+#include <pl011.h>
 #include <pl061_gpio.h>
 #include <platform.h>
 #include <platform_def.h>
@@ -26,6 +26,7 @@
 /* Data structure which holds the extents of the trusted RAM for BL1 */
 static meminfo_t bl1_tzram_layout;
 static meminfo_t bl2_tzram_layout;
+static console_pl011_t console;
 
 /*
  * Cannot use default weak implementation in bl1_main.c because BL1 RW data is
@@ -62,7 +63,8 @@ int bl1_plat_handle_post_image_load(unsigned int image_id)
 void bl1_early_platform_setup(void)
 {
 	/* Initialize the console to provide early debug support */
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
+	console_pl011_register(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ,
+			       PL011_BAUDRATE, &console);
 
 	/* Allow BL1 to see the whole Trusted RAM */
 	bl1_tzram_layout.total_base = BL1_RW_BASE;

plat/hisilicon/poplar/bl2_plat_setup.c

@@ -7,7 +7,6 @@
 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl_common.h>
-#include <console.h>
 #include <debug.h>
 #include <desc_image_load.h>
 #include <dw_mmc.h>
@@ -17,6 +16,7 @@
 #include <mmio.h>
 #include <optee_utils.h>
 #include <partition/partition.h>
+#include <pl011.h>
 #include <platform.h>
 #include <string.h>
 #include "hi3798cv200.h"
@@ -31,6 +31,7 @@
 #define BL2_COHERENT_RAM_LIMIT	(unsigned long)(&__COHERENT_RAM_END__)
 
 static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+static console_pl011_t console;
 
 /*******************************************************************************
  * Transfer SCP_BL2 from Trusted RAM using the SCP Download protocol.
@@ -181,7 +182,8 @@ void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 	dw_mmc_params_t params = EMMC_INIT_PARAMS(POPLAR_EMMC_DESC_BASE);
 #endif
 
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
+	console_pl011_register(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ,
+			       PL011_BAUDRATE, &console);
 
 	/* Enable arch timer */
 	generic_delay_timer_init();

plat/hisilicon/poplar/bl31_plat_setup.c

@@ -9,12 +9,12 @@
 #include <assert.h>
 #include <bl31.h>
 #include <bl_common.h>
-#include <console.h>
 #include <cortex_a53.h>
 #include <debug.h>
 #include <errno.h>
 #include <generic_delay_timer.h>
 #include <mmio.h>
+#include <pl011.h>
 #include <platform.h>
 #include <platform_def.h>
 #include <stddef.h>
@@ -34,6 +34,7 @@
 
 static entry_point_info_t bl32_image_ep_info;
 static entry_point_info_t bl33_image_ep_info;
+static console_pl011_t console;
 
 static void hisi_tzpc_sec_init(void)
 {
@@ -72,7 +73,8 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 
 	from_bl2 = (void *) arg0;
 
-	console_init(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ, PL011_BAUDRATE);
+	console_pl011_register(PL011_UART0_BASE, PL011_UART0_CLK_IN_HZ,
+			       PL011_BAUDRATE, &console);
 
 	/* Init console for crash report */
 	plat_crash_console_init();

plat/hisilicon/poplar/plat_pm.c

@@ -7,7 +7,6 @@
 #include <arch_helpers.h>
 #include <assert.h>
 #include <bl_common.h>
-#include <console.h>
 #include <context.h>
 #include <context_mgmt.h>
 #include <debug.h>

plat/hisilicon/poplar/platform.mk

@@ -46,7 +46,7 @@ ERRATA_A53_855873		:= 1
 ERRATA_A53_835769		:= 1
 ERRATA_A53_843419		:= 1
 ENABLE_SVE_FOR_NS		:= 0
-
+MULTI_CONSOLE_API		:= 1
 WORKAROUND_CVE_2017_5715	:= 0
 
 PLAT_PL061_MAX_GPIOS 		:= 104