docs: Update user guide
Make sure the steps in the user guide are up to date and can be performed out of the box. Change-Id: Ib4d959aa771cf515f74e150aaee2fbad24c18c38 Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This commit is contained in:
parent
2c269b4736
commit
68126051d3
|
@ -1014,18 +1014,13 @@ For AArch64:
|
|||
|
||||
::
|
||||
|
||||
make PLAT=fvp BL33=<path/to/bl33.bin> fip
|
||||
make PLAT=fvp BL33=<path-to>/bl33.bin fip
|
||||
|
||||
For AArch32:
|
||||
|
||||
::
|
||||
|
||||
make PLAT=fvp ARCH=aarch32 AARCH32_SP=sp_min BL33=<path/to/bl33.bin> fip
|
||||
|
||||
Note that AArch32 support for Normal world boot loader (BL33), like U-boot or
|
||||
UEFI, on FVP is not available upstream. Hence custom solutions are required to
|
||||
allow Linux boot on FVP. These instructions assume such a custom boot loader
|
||||
(BL33) is available.
|
||||
make PLAT=fvp ARCH=aarch32 AARCH32_SP=sp_min BL33=<path-to>/bl33.bin fip
|
||||
|
||||
The resulting FIP may be found in:
|
||||
|
||||
|
@ -1276,8 +1271,7 @@ section for more info on selecting the right FDT to use.
|
|||
make [DEBUG=1] [V=1] fiptool
|
||||
|
||||
# Unpack firmware images from Linaro FIP
|
||||
./tools/fiptool/fiptool unpack \
|
||||
<path/to/linaro/release>/fip.bin
|
||||
./tools/fiptool/fiptool unpack <path-to-linaro-release>/fip.bin
|
||||
|
||||
The unpack operation will result in a set of binary images extracted to the
|
||||
current working directory. The SCP_BL2 image corresponds to
|
||||
|
@ -1287,8 +1281,8 @@ section for more info on selecting the right FDT to use.
|
|||
exist in the current directory. If that is the case, either delete those
|
||||
files or use the ``--force`` option to overwrite.
|
||||
|
||||
Note: For AArch32, the instructions below assume that nt-fw.bin is a custom
|
||||
Normal world boot loader that supports AArch32.
|
||||
Note: For AArch32, the instructions below assume that nt-fw.bin is a normal
|
||||
world boot loader that supports AArch32.
|
||||
|
||||
#. Build TF-A images and create a new FIP for FVP
|
||||
|
||||
|
@ -1309,9 +1303,7 @@ section for more info on selecting the right FDT to use.
|
|||
|
||||
::
|
||||
|
||||
make PLAT=juno all fip \
|
||||
BL33=<path-to-juno-oe-uboot>/SOFTWARE/bl33-uboot.bin \
|
||||
SCP_BL2=<path-to-juno-busybox-uboot>/SOFTWARE/scp_bl2.bin
|
||||
make PLAT=juno BL33=nt-fw.bin SCP_BL2=scp-fw.bin all fip
|
||||
|
||||
For AArch32:
|
||||
|
||||
|
@ -1333,6 +1325,13 @@ section for more info on selecting the right FDT to use.
|
|||
make ARCH=aarch32 PLAT=juno AARCH32_SP=sp_min \
|
||||
RESET_TO_SP_MIN=1 JUNO_AARCH32_EL3_RUNTIME=1 bl32
|
||||
|
||||
- Save ``bl32.bin`` to a temporary location and clean the build products.
|
||||
|
||||
::
|
||||
|
||||
cp <path-to-build>/bl32.bin <path-to-temporary>
|
||||
make realclean
|
||||
|
||||
- Before building BL1 and BL2, the environment variable ``CROSS_COMPILE``
|
||||
must point to the AArch64 Linaro cross compiler.
|
||||
|
||||
|
@ -1346,9 +1345,8 @@ section for more info on selecting the right FDT to use.
|
|||
::
|
||||
|
||||
make ARCH=aarch64 PLAT=juno JUNO_AARCH32_EL3_RUNTIME=1 \
|
||||
BL33=<path-to-juno32-oe-uboot>/SOFTWARE/bl33-uboot.bin \
|
||||
SCP_BL2=<path-to-juno32-oe-uboot>/SOFTWARE/scp_bl2.bin \
|
||||
BL32=<path-to-bl32>/bl32.bin all fip
|
||||
BL33=nt-fw.bin SCP_BL2=scp-fw.bin \
|
||||
BL32=<path-to-temporary>/bl32.bin all fip
|
||||
|
||||
The resulting BL1 and FIP images may be found in:
|
||||
|
||||
|
@ -1504,7 +1502,7 @@ used:
|
|||
|
||||
::
|
||||
|
||||
-C bp.flashloader1.fname="/path/to/el3-payload"
|
||||
-C bp.flashloader1.fname="<path-to>/<el3-payload>"
|
||||
|
||||
On Foundation FVP, there is no flash loader component and the EL3 payload
|
||||
may be programmed anywhere in flash using method 3 below.
|
||||
|
@ -1514,15 +1512,15 @@ used:
|
|||
|
||||
::
|
||||
|
||||
load /path/to/el3-payload.elf
|
||||
load <path-to>/el3-payload.elf
|
||||
|
||||
#. The EL3 payload may be pre-loaded in volatile memory using the following
|
||||
model parameters:
|
||||
|
||||
::
|
||||
|
||||
--data cluster0.cpu0="/path/to/el3-payload"@address [Base FVPs]
|
||||
--data="/path/to/el3-payload"@address [Foundation FVP]
|
||||
--data cluster0.cpu0="<path-to>/el3-payload>"@address [Base FVPs]
|
||||
--data="<path-to>/<el3-payload>"@address [Foundation FVP]
|
||||
|
||||
The address provided to the FVP must match the ``EL3_PAYLOAD_BASE`` address
|
||||
used when building TF-A.
|
||||
|
@ -1650,12 +1648,10 @@ The latest version of the AArch64 build of TF-A has been tested on the following
|
|||
Arm FVPs without shifted affinities, and that do not support threaded CPU cores
|
||||
(64-bit host machine only).
|
||||
|
||||
NOTE: Unless otherwise stated, the model version is Version 11.4 Build 37.
|
||||
The FVP models used are Version 11.5 Build 33, unless otherwise stated.
|
||||
|
||||
- ``FVP_Base_Aresx4``
|
||||
- ``FVP_Base_AEMv8A-AEMv8A``
|
||||
- ``FVP_Base_AEMv8A-AEMv8A-AEMv8A-AEMv8A-CCN502``
|
||||
- ``FVP_Base_AEMv8A-AEMv8A``
|
||||
- ``FVP_Base_RevC-2xAEMv8A``
|
||||
- ``FVP_Base_Cortex-A32x4``
|
||||
- ``FVP_Base_Cortex-A35x4``
|
||||
|
@ -1670,7 +1666,8 @@ NOTE: Unless otherwise stated, the model version is Version 11.4 Build 37.
|
|||
- ``FVP_Base_Cortex-A73x4``
|
||||
- ``FVP_Base_Cortex-A75x4``
|
||||
- ``FVP_Base_Cortex-A76x4``
|
||||
- ``FVP_CSS_SGI-575`` (Version 11.3 build 40)
|
||||
- ``FVP_Base_Neoverse-N1x4`` (Tested with internal model)
|
||||
- ``FVP_CSS_SGI-575`` (Version 11.3 build 42)
|
||||
- ``Foundation_Platform``
|
||||
|
||||
The latest version of the AArch32 build of TF-A has been tested on the following
|
||||
|
@ -1832,6 +1829,9 @@ with 8 CPUs using the AArch64 build of TF-A.
|
|||
--data cluster0.cpu0="<path-to>/<kernel-binary>"@0x80080000 \
|
||||
--data cluster0.cpu0="<path-to>/<ramdisk>"@0x84000000
|
||||
|
||||
Note: The ``FVP_Base_RevC-2xAEMv8A`` has shifted affinities and requires a
|
||||
specific DTS for all the CPUs to be loaded.
|
||||
|
||||
Running on the AEMv8 Base FVP (AArch32) with reset to BL1 entrypoint
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
|
@ -1928,7 +1928,7 @@ with 8 CPUs using the AArch64 build of TF-A.
|
|||
|
||||
Notes:
|
||||
|
||||
- Since Position Independent Executable (PIE) support is enabled for BL31
|
||||
- If Position Independent Executable (PIE) support is enabled for BL31
|
||||
in this config, it can be loaded at any valid address for execution.
|
||||
|
||||
- Since a FIP is not loaded when using BL31 as reset entrypoint, the
|
||||
|
@ -1939,6 +1939,9 @@ Notes:
|
|||
and loaded via the ``--data cluster0.cpu0="<path-to>/<fdt>"@0x82000000``
|
||||
parameter.
|
||||
|
||||
- The ``FVP_Base_RevC-2xAEMv8A`` has shifted affinities and requires a
|
||||
specific DTS for all the CPUs to be loaded.
|
||||
|
||||
- The ``-C cluster<X>.cpu<Y>.RVBAR=@<base-address-of-bl31>`` parameter, where
|
||||
X and Y are the cluster and CPU numbers respectively, is used to set the
|
||||
reset vector for each core.
|
||||
|
|
Loading…
Reference in New Issue