andrius
/
arm-trusted-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

zynqmp: pm_service: Add support for resetting ULPI transceiver 

To make ULPI transceiver work, a HIGH - LOW - HIGH pulse needs
to be given to resetb pin of ULPI chip. In ZYNQMP, this resetb
pin is being driven by BOOT MODE PIN 1. The BOOT MODE PIN's
are controlled by BOOT_PIN_CTRL register present in CRL_APB
address region. Since CRL_APB can be resticted to secure access,
this pin should be controlled by ATF.

This patch adds the support for the same.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
This commit is contained in:
Siva Durga Prasad Paladugu 2018-09-04 17:03:25 +05:30
parent 1916092ffb
commit 7c0b17e34b
3 changed files with 48 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
plat/xilinx/zynqmp/pm_service/pm_api_ioctl.c
View File

@ -471,6 +471,40 @@ static enum pm_ret_status pm_ioctl_read_pggs(unsigned int index,
return pm_mmio_read(PGGS_BASEADDR + (index << 2), value);
}
/**
* pm_ioctl_ulpi_reset() - Ioctl function for performing ULPI reset
*
* This function peerforms the ULPI reset sequence for resetting
* the ULPI transceiver.
*
* @return Returns status, either success or error+reason
*/
static enum pm_ret_status pm_ioctl_ulpi_reset(void)
{
enum pm_ret_status ret;
ret = pm_mmio_write(CRL_APB_BOOT_PIN_CTRL, CRL_APB_BOOT_PIN_MASK,
ZYNQMP_ULPI_RESET_VAL_HIGH);
if (ret != PM_RET_SUCCESS)
return ret;
/* Drive ULPI assert for atleast 1ms */
mdelay(1);
ret = pm_mmio_write(CRL_APB_BOOT_PIN_CTRL, CRL_APB_BOOT_PIN_MASK,
ZYNQMP_ULPI_RESET_VAL_LOW);
if (ret != PM_RET_SUCCESS)
return ret;
/* Drive ULPI de-assert for atleast 1ms */
mdelay(1);
ret = pm_mmio_write(CRL_APB_BOOT_PIN_CTRL, CRL_APB_BOOT_PIN_MASK,
ZYNQMP_ULPI_RESET_VAL_HIGH);
return ret;
}
/**
* pm_api_ioctl() - PM IOCTL API for device control and configs
* @node_id Node ID of the device
@ -540,6 +574,9 @@ enum pm_ret_status pm_api_ioctl(enum pm_node_id nid,
case IOCTL_READ_PGGS:
ret = pm_ioctl_read_pggs(arg1, value);
break;
case IOCTL_ULPI_RESET:
ret = pm_ioctl_ulpi_reset();
break;
default:
ret = PM_RET_ERROR_NOTSUPPORTED;
break;

2
plat/xilinx/zynqmp/pm_service/pm_api_ioctl.h
View File

@ -32,6 +32,8 @@ enum {
IOCTL_READ_GGS,
IOCTL_WRITE_PGGS,
IOCTL_READ_PGGS,
/* IOCTL for ULPI reset */
IOCTL_ULPI_RESET,
};
//RPU operation mode

9
plat/xilinx/zynqmp/zynqmp_def.h
View File

@ -48,6 +48,7 @@
#define CRL_APB_BOOT_MODE_USER (CRL_APB_BASE + 0x200)
#define CRL_APB_RESET_CTRL (CRL_APB_BASE + 0x218)
#define CRL_APB_RST_LPD_TOP (CRL_APB_BASE + 0x23C)
#define CRL_APB_BOOT_PIN_CTRL (CRL_APB_BASE + U(0x250))
#define CRL_APB_CLK_BASE U(0xFF5E0020)
#define CRL_APB_RPU_AMBA_RESET (U(1) << 2)
@ -56,7 +57,15 @@
#define CRL_APB_RESET_CTRL_SOFT_RESET (U(1) << 4)
#define CRL_APB_BOOT_MODE_MASK (U(0xf) << 0)
#define CRL_APB_BOOT_PIN_MASK (U(0xf0f) << 0)
#define CRL_APB_BOOT_DRIVE_PIN_1_SHIFT U(9)
#define CRL_APB_BOOT_ENABLE_PIN_1_SHIFT U(1)
#define CRL_APB_BOOT_ENABLE_PIN_1 (U(0x1) << CRL_APB_BOOT_ENABLE_PIN_1_SHIFT)
#define CRL_APB_BOOT_DRIVE_PIN_1 (U(0x1) << CRL_APB_BOOT_DRIVE_PIN_1_SHIFT)
#define ZYNQMP_BOOTMODE_JTAG U(0)
#define ZYNQMP_ULPI_RESET_VAL_HIGH (CRL_APB_BOOT_ENABLE_PIN_1 | \
CRL_APB_BOOT_DRIVE_PIN_1)
#define ZYNQMP_ULPI_RESET_VAL_LOW CRL_APB_BOOT_ENABLE_PIN_1
/* system counter registers and bitfields */
#define IOU_SCNTRS_BASE 0xFF260000