diff --git a/drivers/marvell/comphy/comphy-cp110.h b/drivers/marvell/comphy/comphy-cp110.h index 9b10619ed..af5c71518 100644 --- a/drivers/marvell/comphy/comphy-cp110.h +++ b/drivers/marvell/comphy/comphy-cp110.h @@ -54,7 +54,7 @@ #define COMMON_SELECTOR_PIPE_COMPHY_USBH 0x1 #define COMMON_SELECTOR_PIPE_COMPHY_USBD 0x2 -/* SGMII/HS-SGMII/SFI/RXAUI */ +/* SGMII/Base-X/SFI/RXAUI */ #define COMMON_SELECTOR_COMPHY0_1_2_NETWORK 0x1 #define COMMON_SELECTOR_COMPHY3_RXAUI 0x1 #define COMMON_SELECTOR_COMPHY3_SGMII 0x2 diff --git a/drivers/marvell/comphy/phy-comphy-3700.c b/drivers/marvell/comphy/phy-comphy-3700.c index 7377e5e3d..027d07d17 100644 --- a/drivers/marvell/comphy/phy-comphy-3700.c +++ b/drivers/marvell/comphy/phy-comphy-3700.c @@ -135,7 +135,7 @@ static void mvebu_a3700_comphy_set_phy_selector(uint8_t comphy_index, break; case (COMPHY_SGMII_MODE): - case (COMPHY_HS_SGMII_MODE): + case (COMPHY_2500BASEX_MODE): if (comphy_index == COMPHY_LANE0) reg &= ~COMPHY_SELECTOR_USB3_GBE1_SEL_BIT; else if (comphy_index == COMPHY_LANE1) @@ -183,7 +183,7 @@ error: * with COMPHY_USB3D_MODE or COMPHY_USB3H_MODE. (The usb3 phy initialization * code does not differentiate between these modes.) * Also it returns COMPHY_SGMII_MODE even if the phy was configures with - * COMPHY_HS_SGMII_MODE. (The sgmii phy initialization code does differentiate + * COMPHY_2500BASEX_MODE. (The sgmii phy initialization code does differentiate * between these modes, but it is irrelevant when powering the phy off.) */ static int mvebu_a3700_comphy_get_mode(uint8_t comphy_index) @@ -401,8 +401,8 @@ static int mvebu_a3700_comphy_sgmii_power_on(uint8_t comphy_index, /* SGMII 1G, SerDes speed 1.25G */ data |= SD_SPEED_1_25_G << GEN_RX_SEL_OFFSET; data |= SD_SPEED_1_25_G << GEN_TX_SEL_OFFSET; - } else if (mode == COMPHY_HS_SGMII_MODE) { - /* HS SGMII (2.5G), SerDes speed 3.125G */ + } else if (mode == COMPHY_2500BASEX_MODE) { + /* 2500Base-X, SerDes speed 3.125G */ data |= SD_SPEED_2_5_G << GEN_RX_SEL_OFFSET; data |= SD_SPEED_2_5_G << GEN_TX_SEL_OFFSET; } else { @@ -479,7 +479,7 @@ static int mvebu_a3700_comphy_sgmii_power_on(uint8_t comphy_index, * 25 MHz the default values stored in PHY registers are OK. */ debug("Running C-DPI phy init %s mode\n", - mode == COMPHY_HS_SGMII_MODE ? "2G5" : "1G"); + mode == COMPHY_2500BASEX_MODE ? "2G5" : "1G"); if (get_ref_clk() == 40) comphy_sgmii_phy_init(comphy_index, mode, sd_ip_addr); @@ -883,7 +883,7 @@ int mvebu_3700_comphy_power_on(uint8_t comphy_index, uint32_t comphy_mode) comphy_mode); break; case(COMPHY_SGMII_MODE): - case(COMPHY_HS_SGMII_MODE): + case(COMPHY_2500BASEX_MODE): ret = mvebu_a3700_comphy_sgmii_power_on(comphy_index, comphy_mode); break; @@ -960,7 +960,7 @@ int mvebu_3700_comphy_power_off(uint8_t comphy_index, uint32_t comphy_mode) switch (mode) { case(COMPHY_SGMII_MODE): - case(COMPHY_HS_SGMII_MODE): + case(COMPHY_2500BASEX_MODE): err = mvebu_a3700_comphy_sgmii_power_off(comphy_index); break; case (COMPHY_USB3_MODE): diff --git a/drivers/marvell/comphy/phy-comphy-common.h b/drivers/marvell/comphy/phy-comphy-common.h index e3b430a91..c599437a3 100644 --- a/drivers/marvell/comphy/phy-comphy-common.h +++ b/drivers/marvell/comphy/phy-comphy-common.h @@ -87,7 +87,7 @@ #define COMPHY_SATA_MODE 0x1 #define COMPHY_SGMII_MODE 0x2 /* SGMII 1G */ -#define COMPHY_HS_SGMII_MODE 0x3 /* SGMII 2.5G */ +#define COMPHY_2500BASEX_MODE 0x3 /* 2500Base-X */ #define COMPHY_USB3H_MODE 0x4 #define COMPHY_USB3D_MODE 0x5 #define COMPHY_PCIE_MODE 0x6 diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c index 86f4c77c5..d10425b36 100644 --- a/drivers/marvell/comphy/phy-comphy-cp110.c +++ b/drivers/marvell/comphy/phy-comphy-cp110.c @@ -30,7 +30,7 @@ /* COMPHY speed macro */ #define COMPHY_SPEED_1_25G 0 /* SGMII 1G */ #define COMPHY_SPEED_2_5G 1 -#define COMPHY_SPEED_3_125G 2 /* SGMII 2.5G */ +#define COMPHY_SPEED_3_125G 2 /* 2500Base-X */ #define COMPHY_SPEED_5G 3 #define COMPHY_SPEED_5_15625G 4 /* XFI 5G */ #define COMPHY_SPEED_6G 5 @@ -191,7 +191,7 @@ static void mvebu_cp110_comphy_set_phy_selector(uint64_t comphy_base, case(3): /* For comphy 3: * 0x1 = RXAUI_Lane1 - * 0x2 = SGMII/HS-SGMII Port1 + * 0x2 = SGMII/Base-X Port1 */ if (mode == COMPHY_RXAUI_MODE) reg |= COMMON_SELECTOR_COMPHY3_RXAUI << @@ -202,20 +202,20 @@ static void mvebu_cp110_comphy_set_phy_selector(uint64_t comphy_base, break; case(4): /* For comphy 4: - * 0x1 = SGMII/HS-SGMII Port1, XFI1/SFI1 - * 0x2 = SGMII/HS-SGMII Port0: XFI0/SFI0, RXAUI_Lane0 + * 0x1 = SGMII/Base-X Port1, XFI1/SFI1 + * 0x2 = SGMII/Base-X Port0: XFI0/SFI0, RXAUI_Lane0 * - * We want to check if SGMII1/HS_SGMII1 is the + * We want to check if SGMII1 is the * requested mode in order to determine which value * should be set (all other modes use the same value) * so we need to strip the mode, and check the ID - * because we might handle SGMII0/HS_SGMII0 too. + * because we might handle SGMII0 too. */ /* TODO: need to distinguish between CP110 and CP115 * as SFI1/XFI1 available only for CP115. */ if ((mode == COMPHY_SGMII_MODE || - mode == COMPHY_HS_SGMII_MODE || + mode == COMPHY_2500BASEX_MODE || mode == COMPHY_SFI_MODE || mode == COMPHY_XFI_MODE || mode == COMPHY_AP_MODE) @@ -228,7 +228,7 @@ static void mvebu_cp110_comphy_set_phy_selector(uint64_t comphy_base, break; case(5): /* For comphy 5: - * 0x1 = SGMII/HS-SGMII Port2 + * 0x1 = SGMII/Base-X Port2 * 0x2 = RXAUI Lane1 */ if (mode == COMPHY_RXAUI_MODE) @@ -713,7 +713,7 @@ static int mvebu_cp110_comphy_sgmii_power_on(uint64_t comphy_base, data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET; data |= 0x6 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET; } else if (sgmii_speed == COMPHY_SPEED_3_125G) { - /* HS SGMII (2.5G), SerDes speed 3.125G */ + /* 2500Base-X, SerDes speed 3.125G */ data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_RX_OFFSET; data |= 0x8 << SD_EXTERNAL_CONFIG0_SD_PHY_GEN_TX_OFFSET; } else { @@ -2343,7 +2343,7 @@ int mvebu_cp110_comphy_digital_reset(uint64_t comphy_base, switch (mode) { case (COMPHY_SGMII_MODE): - case (COMPHY_HS_SGMII_MODE): + case (COMPHY_2500BASEX_MODE): case (COMPHY_XFI_MODE): case (COMPHY_SFI_MODE): case (COMPHY_RXAUI_MODE): @@ -2378,7 +2378,7 @@ int mvebu_cp110_comphy_power_on(uint64_t comphy_base, comphy_mode); break; case(COMPHY_SGMII_MODE): - case(COMPHY_HS_SGMII_MODE): + case(COMPHY_2500BASEX_MODE): err = mvebu_cp110_comphy_sgmii_power_on(comphy_base, comphy_index, comphy_mode);