diff --git a/plat/xilinx/zynqmp/pm_service/pm_api_sys.c b/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
index e85b2cee3..9bc11f26b 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
+++ b/plat/xilinx/zynqmp/pm_service/pm_api_sys.c
@@ -1237,3 +1237,34 @@ enum pm_ret_status pm_fpga_read(uint32_t reg_numframes,
 			 address_high, readback_type);
 	return pm_ipi_send_sync(primary_proc, payload, value, 1);
 }
+
+/*
+ * pm_pll_set_parameter() - Set the PLL parameter value
+ * @nid		Node id of the target PLL
+ * @param_id	ID of the PLL parameter
+ * @value	Parameter value to be set
+ *
+ * Setting the parameter will have physical effect once the PLL mode is set to
+ * integer or fractional.
+ *
+ * @return	Error if an argument is not valid or status as returned by the
+ *		PM controller (PMU)
+ */
+enum pm_ret_status pm_pll_set_parameter(enum pm_node_id nid,
+					enum pm_pll_param param_id,
+					unsigned int value)
+{
+	uint32_t payload[PAYLOAD_ARG_CNT];
+
+	/* Check if given node ID is a PLL node */
+	if (nid < NODE_APLL || nid > NODE_IOPLL)
+		return PM_RET_ERROR_ARGS;
+
+	/* Check if parameter ID is valid and return an error if it's not */
+	if (param_id >= PM_PLL_PARAM_MAX)
+		return PM_RET_ERROR_ARGS;
+
+	/* Send request to the PMU */
+	PM_PACK_PAYLOAD4(payload, PM_PLL_SET_PARAMETER, nid, param_id, value);
+	return pm_ipi_send_sync(primary_proc, payload, NULL, 0);
+}
diff --git a/plat/xilinx/zynqmp/pm_service/pm_api_sys.h b/plat/xilinx/zynqmp/pm_service/pm_api_sys.h
index fee91cdd9..acef4906c 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_api_sys.h
+++ b/plat/xilinx/zynqmp/pm_service/pm_api_sys.h
@@ -176,4 +176,8 @@ enum pm_ret_status pm_aes_engine(uint32_t address_high,
 				 uint32_t address_low,
 				 uint32_t  *value);
 
+enum pm_ret_status pm_pll_set_parameter(enum pm_node_id nid,
+				enum pm_pll_param param_id,
+				unsigned int value);
+
 #endif /* PM_API_SYS_H */
diff --git a/plat/xilinx/zynqmp/pm_service/pm_defs.h b/plat/xilinx/zynqmp/pm_service/pm_defs.h
index 7a0d97850..fe965c539 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_defs.h
+++ b/plat/xilinx/zynqmp/pm_service/pm_defs.h
@@ -92,6 +92,8 @@ enum pm_api_id {
 	/* FPGA PL Readback */
 	PM_FPGA_READ,
 	PM_SECURE_AES,
+	/* PLL control API functions */
+	PM_PLL_SET_PARAMETER,
 	PM_API_MAX
 };
 
@@ -265,4 +267,31 @@ enum pm_shutdown_subtype {
 	PMF_SHUTDOWN_SUBTYPE_SYSTEM,
 };
 
+/**
+ * @PM_PLL_PARAM_DIV2:         Enable for divide by 2 function inside the PLL
+ * @PM_PLL_PARAM_FBDIV:        Feedback divisor integer portion for the PLL
+ * @PM_PLL_PARAM_DATA:         Feedback divisor fractional portion for the PLL
+ * @PM_PLL_PARAM_PRE_SRC:      Clock source for PLL input
+ * @PM_PLL_PARAM_POST_SRC:     Clock source for PLL Bypass mode
+ * @PM_PLL_PARAM_LOCK_DLY:     Lock circuit config settings for lock windowsize
+ * @PM_PLL_PARAM_LOCK_CNT:     Lock circuit counter setting
+ * @PM_PLL_PARAM_LFHF:         PLL loop filter high frequency capacitor control
+ * @PM_PLL_PARAM_CP:           PLL charge pump control
+ * @PM_PLL_PARAM_RES:          PLL loop filter resistor control
+ */
+enum pm_pll_param {
+	PM_PLL_PARAM_DIV2,
+	PM_PLL_PARAM_FBDIV,
+	PM_PLL_PARAM_DATA,
+	PM_PLL_PARAM_PRE_SRC,
+	PM_PLL_PARAM_POST_SRC,
+	PM_PLL_PARAM_LOCK_DLY,
+	PM_PLL_PARAM_LOCK_CNT,
+	PM_PLL_PARAM_LFHF,
+	PM_PLL_PARAM_CP,
+	PM_PLL_PARAM_RES,
+	PM_PLL_PARAM_MAX,
+};
+
+
 #endif /* PM_DEFS_H */
diff --git a/plat/xilinx/zynqmp/pm_service/pm_svc_main.c b/plat/xilinx/zynqmp/pm_service/pm_svc_main.c
index 7790c979d..743011003 100644
--- a/plat/xilinx/zynqmp/pm_service/pm_svc_main.c
+++ b/plat/xilinx/zynqmp/pm_service/pm_svc_main.c
@@ -563,6 +563,10 @@ uint64_t pm_smc_handler(uint32_t smc_fid, uint64_t x1, uint64_t x2, uint64_t x3,
 		SMC_RET1(handle, (uint64_t)ret | ((uint64_t)value) << 32);
 	}
 
+	case PM_PLL_SET_PARAMETER:
+		ret = pm_pll_set_parameter(pm_arg[0], pm_arg[1], pm_arg[2]);
+		SMC_RET1(handle, (uint64_t)ret);
+
 	default:
 		WARN("Unimplemented PM Service Call: 0x%x\n", smc_fid);
 		SMC_RET1(handle, SMC_UNK);