plat: imx7: refactor code for reuse

For the iMX7 SOCs, part of the code for platform
setup implementation can be reused and made
common for all these SoCs. This patch extracts
the common part for reuse.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Change-Id: I42fd4167e6903416df96a0159a046abf3896e878
This commit is contained in:
Jun Nie 2019-06-13 11:38:24 +08:00
parent dc150425c3
commit c5937f2d1d
14 changed files with 403 additions and 376 deletions

View File

@ -1,6 +1,5 @@
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
*
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef IMX_CLOCK_H
@ -819,6 +818,8 @@ struct ccm_target_root_ctrl {
#define CCM_TRGT_MUX_WDOG_CLK_ROOT_USB_PLL (BIT(26) | BIT(24))
#define CCM_TRGT_MUX_WDOG_CLK_ROOT_REF_1M (BIT(26) | BIT(25))
#define CCM_TRGT_MUX_WDOG_CLK_ROOT_SYS_PLL_PFD1_DIV2 ((BIT(26) | BIT(25) | BIT(24))
#define WDOG_DEFAULT_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\
CCM_TRGT_MUX_WDOG_CLK_ROOT_OSC_24M)
/* Target CSI_MCLK_CLK_ROOT */

View File

@ -0,0 +1,110 @@
#
# Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
# Architecture
$(eval $(call add_define,ARMV7_SUPPORTS_LARGE_PAGE_ADDRESSING))
TF_CFLAGS += -mfpu=neon
ASFLAGS += -mfpu=neon
# Platform
PLAT_INCLUDES := -Idrivers/imx/uart \
-Iplat/imx/common/include \
-Iplat/imx/imx7/include \
-Idrivers/imx/timer \
-Idrivers/imx/usdhc \
# Translation tables library
include lib/xlat_tables_v2/xlat_tables.mk
BL2_SOURCES += common/desc_image_load.c \
drivers/delay_timer/delay_timer.c \
drivers/mmc/mmc.c \
drivers/io/io_block.c \
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
drivers/io/io_storage.c \
drivers/imx/timer/imx_gpt.c \
drivers/imx/uart/imx_uart.c \
drivers/imx/uart/imx_crash_uart.S \
lib/aarch32/arm32_aeabi_divmod.c \
lib/aarch32/arm32_aeabi_divmod_a32.S \
lib/cpus/aarch32/cortex_a7.S \
lib/optee/optee_utils.c \
plat/imx/common/imx_aips.c \
plat/imx/common/imx_caam.c \
plat/imx/common/imx_clock.c \
plat/imx/common/imx_csu.c \
plat/imx/common/imx_io_mux.c \
plat/imx/common/imx_snvs.c \
plat/imx/common/imx_wdog.c \
plat/imx/common/imx7_clock.c \
plat/imx/imx7/common/imx7_bl2_mem_params_desc.c \
plat/imx/imx7/common/imx7_bl2_el3_common.c \
plat/imx/imx7/common/imx7_helpers.S \
plat/imx/imx7/common/imx7_image_load.c \
plat/imx/imx7/common/imx7_io_storage.c \
plat/imx/common/aarch32/imx_uart_console.S \
${XLAT_TABLES_LIB_SRCS}
ifneq (${TRUSTED_BOARD_BOOT},0)
include drivers/auth/mbedtls/mbedtls_crypto.mk
include drivers/auth/mbedtls/mbedtls_x509.mk
AUTH_SOURCES := drivers/auth/auth_mod.c \
drivers/auth/crypto_mod.c \
drivers/auth/img_parser_mod.c \
drivers/auth/tbbr/tbbr_cot.c
BL2_SOURCES += ${AUTH_SOURCES} \
plat/common/tbbr/plat_tbbr.c \
plat/imx/imx7/common/imx7_trusted_boot.c \
plat/imx/imx7/common/imx7_rotpk.S
ROT_KEY = $(BUILD_PLAT)/rot_key.pem
ROTPK_HASH = $(BUILD_PLAT)/rotpk_sha256.bin
$(eval $(call add_define_val,ROTPK_HASH,'"$(ROTPK_HASH)"'))
$(eval $(call MAKE_LIB_DIRS))
$(BUILD_PLAT)/bl2/imx7_rotpk.o: $(ROTPK_HASH)
certificates: $(ROT_KEY)
$(ROT_KEY): | $(BUILD_PLAT)
@echo " OPENSSL $@"
@if [ ! -f $(ROT_KEY) ]; then \
openssl genrsa 2048 > $@ 2>/dev/null; \
fi
$(ROTPK_HASH): $(ROT_KEY)
@echo " OPENSSL $@"
$(Q)openssl rsa -in $< -pubout -outform DER 2>/dev/null |\
openssl dgst -sha256 -binary > $@ 2>/dev/null
endif
# Add the build options to pack BLx images and kernel device tree
# in the FIP if the platform requires.
ifneq ($(BL2),)
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
endif
ifneq ($(BL32_EXTRA1),)
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
endif
ifneq ($(BL32_EXTRA2),)
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
endif
ifneq ($(HW_CONFIG),)
$(eval $(call TOOL_ADD_IMG,HW_CONFIG,--hw-config))
endif
# Verify build config
# -------------------
ifeq (${ARCH},aarch64)
$(error Error: AArch64 not supported on i.mx7)
endif

View File

@ -0,0 +1,198 @@
/*
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <platform_def.h>
#include <arch_helpers.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/desc_image_load.h>
#include <drivers/mmc.h>
#include <lib/xlat_tables/xlat_mmu_helpers.h>
#include <lib/xlat_tables/xlat_tables_defs.h>
#include <lib/mmio.h>
#include <lib/optee_utils.h>
#include <lib/utils.h>
#include <imx_aips.h>
#include <imx_caam.h>
#include <imx_clock.h>
#include <imx_csu.h>
#include <imx_gpt.h>
#include <imx_uart.h>
#include <imx_snvs.h>
#include <imx_wdog.h>
#include <imx7_def.h>
#ifndef AARCH32_SP_OPTEE
#error "Must build with OPTEE support included"
#endif
uintptr_t plat_get_ns_image_entrypoint(void)
{
return IMX7_UBOOT_BASE;
}
static uint32_t imx7_get_spsr_for_bl32_entry(void)
{
return SPSR_MODE32(MODE32_svc, SPSR_T_ARM, SPSR_E_LITTLE,
DISABLE_ALL_EXCEPTIONS);
}
static uint32_t imx7_get_spsr_for_bl33_entry(void)
{
return SPSR_MODE32(MODE32_svc,
plat_get_ns_image_entrypoint() & 0x1,
SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
}
int bl2_plat_handle_post_image_load(unsigned int image_id)
{
int err = 0;
bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
bl_mem_params_node_t *hw_cfg_mem_params = NULL;
bl_mem_params_node_t *pager_mem_params = NULL;
bl_mem_params_node_t *paged_mem_params = NULL;
assert(bl_mem_params);
switch (image_id) {
case BL32_IMAGE_ID:
pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
assert(pager_mem_params);
paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
assert(paged_mem_params);
err = parse_optee_header(&bl_mem_params->ep_info,
&pager_mem_params->image_info,
&paged_mem_params->image_info);
if (err != 0)
WARN("OPTEE header parse error.\n");
/*
* When ATF loads the DTB the address of the DTB is passed in
* arg2, if an hw config image is present use the base address
* as DTB address an pass it as arg2
*/
hw_cfg_mem_params = get_bl_mem_params_node(HW_CONFIG_ID);
bl_mem_params->ep_info.args.arg0 =
bl_mem_params->ep_info.args.arg1;
bl_mem_params->ep_info.args.arg1 = 0;
if (hw_cfg_mem_params)
bl_mem_params->ep_info.args.arg2 =
hw_cfg_mem_params->image_info.image_base;
else
bl_mem_params->ep_info.args.arg2 = 0;
bl_mem_params->ep_info.args.arg3 = 0;
bl_mem_params->ep_info.spsr = imx7_get_spsr_for_bl32_entry();
break;
case BL33_IMAGE_ID:
/* AArch32 only core: OP-TEE expects NSec EP in register LR */
pager_mem_params = get_bl_mem_params_node(BL32_IMAGE_ID);
assert(pager_mem_params);
pager_mem_params->ep_info.lr_svc = bl_mem_params->ep_info.pc;
/* BL33 expects to receive the primary CPU MPID (through r0) */
bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
bl_mem_params->ep_info.spsr = imx7_get_spsr_for_bl33_entry();
break;
default:
/* Do nothing in default case */
break;
}
return err;
}
void bl2_el3_plat_arch_setup(void)
{
/* Setup the MMU here */
}
static void imx7_setup_system_counter(void)
{
unsigned long freq = SYS_COUNTER_FREQ_IN_TICKS;
/* Set the frequency table index to our target frequency */
write_cntfrq(freq);
/* Enable system counter @ frequency table index 0, halt on debug */
mmio_write_32(SYS_CNTCTL_BASE + CNTCR_OFF,
CNTCR_FCREQ(0) | CNTCR_HDBG | CNTCR_EN);
}
static void imx7_setup_wdog_clocks(void)
{
uint32_t wdog_en_bits = (uint32_t)WDOG_DEFAULT_CLK_SELECT;
imx_clock_set_wdog_clk_root_bits(wdog_en_bits);
imx_clock_enable_wdog(0);
imx_clock_enable_wdog(1);
imx_clock_enable_wdog(2);
imx_clock_enable_wdog(3);
}
/*
* bl2_el3_early_platform_setup()
* MMU off
*/
void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
u_register_t arg3, u_register_t arg4)
{
static console_imx_uart_t console;
int console_scope = CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME;
/* Initialize common components */
imx_aips_init();
imx_csu_init();
imx_snvs_init();
imx_gpt_ops_init(GPT1_BASE_ADDR);
imx_clock_init();
imx7_setup_system_counter();
imx7_setup_wdog_clocks();
/* Platform specific setup */
imx7_platform_setup(arg1, arg2, arg3, arg4);
/* Init UART, clock should be enabled in imx7_platform_setup() */
console_imx_uart_register(PLAT_IMX7_BOOT_UART_BASE,
PLAT_IMX7_BOOT_UART_CLK_IN_HZ,
PLAT_IMX7_CONSOLE_BAUDRATE,
&console);
console_set_scope(&console.console, console_scope);
/* Open handles to persistent storage */
plat_imx7_io_setup();
/* Setup higher-level functionality CAAM, RTC etc */
imx_caam_init();
imx_wdog_init();
/* Print out the expected memory map */
VERBOSE("\tOPTEE 0x%08x-0x%08x\n", IMX7_OPTEE_BASE, IMX7_OPTEE_LIMIT);
VERBOSE("\tATF/BL2 0x%08x-0x%08x\n", BL2_RAM_BASE, BL2_RAM_LIMIT);
VERBOSE("\tSHRAM 0x%08x-0x%08x\n", SHARED_RAM_BASE, SHARED_RAM_LIMIT);
VERBOSE("\tFIP 0x%08x-0x%08x\n", IMX7_FIP_BASE, IMX7_FIP_LIMIT);
VERBOSE("\tDTB-OVERLAY 0x%08x-0x%08x\n", IMX7_DTB_OVERLAY_BASE, IMX7_DTB_OVERLAY_LIMIT);
VERBOSE("\tDTB 0x%08x-0x%08x\n", IMX7_DTB_BASE, IMX7_DTB_LIMIT);
VERBOSE("\tUBOOT/BL33 0x%08x-0x%08x\n", IMX7_UBOOT_BASE, IMX7_UBOOT_LIMIT);
}
/*
* bl2_platform_setup()
* MMU on - enabled by bl2_el3_plat_arch_setup()
*/
void bl2_platform_setup(void)
{
}

View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@ -22,8 +22,8 @@ static bl_mem_params_node_t bl2_mem_params_descs[] = {
SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
image_info_t, 0),
.image_info.image_base = WARP7_OPTEE_BASE,
.image_info.image_max_size = WARP7_OPTEE_SIZE,
.image_info.image_base = IMX7_OPTEE_BASE,
.image_info.image_max_size = IMX7_OPTEE_SIZE,
.next_handoff_image_id = BL33_IMAGE_ID,
},
@ -36,8 +36,8 @@ static bl_mem_params_node_t bl2_mem_params_descs[] = {
SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, VERSION_2,
image_info_t, IMAGE_ATTRIB_SKIP_LOADING),
.image_info.image_base = WARP7_OPTEE_BASE,
.image_info.image_max_size = WARP7_OPTEE_SIZE,
.image_info.image_base = IMX7_OPTEE_BASE,
.image_info.image_max_size = IMX7_OPTEE_SIZE,
.next_handoff_image_id = INVALID_IMAGE_ID,
},
@ -70,8 +70,8 @@ static bl_mem_params_node_t bl2_mem_params_descs[] = {
SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
VERSION_2, image_info_t, 0),
.image_info.image_base = WARP7_UBOOT_BASE,
.image_info.image_max_size = WARP7_UBOOT_SIZE,
.image_info.image_base = IMX7_UBOOT_BASE,
.image_info.image_max_size = IMX7_UBOOT_SIZE,
# endif /* PRELOADED_BL33_BASE */
.next_handoff_image_id = INVALID_IMAGE_ID,

View File

@ -1,5 +1,5 @@
/*
* Copyright (c) Linaro 2018 Limited and Contributors. All rights reserved.
* Copyright (c) Linaro 2018-2019 Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@ -35,14 +35,14 @@ func plat_get_my_entrypoint
endfunc plat_get_my_entrypoint
func plat_crash_console_init
mov_imm r0, PLAT_WARP7_BOOT_UART_BASE
mov_imm r1, PLAT_WARP7_BOOT_UART_CLK_IN_HZ
mov_imm r2, PLAT_WARP7_CONSOLE_BAUDRATE
mov_imm r0, PLAT_IMX7_BOOT_UART_BASE
mov_imm r1, PLAT_IMX7_BOOT_UART_CLK_IN_HZ
mov_imm r2, PLAT_IMX7_CONSOLE_BAUDRATE
b imx_crash_uart_init
endfunc plat_crash_console_init
func plat_crash_console_putc
mov_imm r1, PLAT_WARP7_BOOT_UART_BASE
mov_imm r1, PLAT_IMX7_BOOT_UART_BASE
b imx_crash_uart_putc
endfunc plat_crash_console_putc

View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@ -19,21 +19,21 @@
static const io_dev_connector_t *fip_dev_con;
static uintptr_t fip_dev_handle;
#ifndef WARP7_FIP_MMAP
#ifndef IMX7_FIP_MMAP
static const io_dev_connector_t *mmc_dev_con;
static uintptr_t mmc_dev_handle;
static const io_block_spec_t mmc_fip_spec = {
.offset = WARP7_FIP_MMC_BASE,
.length = WARP7_FIP_SIZE
.offset = IMX7_FIP_MMC_BASE,
.length = IMX7_FIP_SIZE
};
static const io_block_dev_spec_t mmc_dev_spec = {
/* It's used as temp buffer in block driver. */
.buffer = {
.offset = WARP7_FIP_BASE,
.offset = IMX7_FIP_BASE,
/* do we need a new value? */
.length = WARP7_FIP_SIZE
.length = IMX7_FIP_SIZE
},
.ops = {
.read = mmc_read_blocks,
@ -49,8 +49,8 @@ static const io_dev_connector_t *memmap_dev_con;
static uintptr_t memmap_dev_handle;
static const io_block_spec_t fip_block_spec = {
.offset = WARP7_FIP_BASE,
.length = WARP7_FIP_SIZE
.offset = IMX7_FIP_BASE,
.length = IMX7_FIP_SIZE
};
static int open_memmap(const uintptr_t spec);
#endif
@ -106,7 +106,7 @@ struct plat_io_policy {
};
static const struct plat_io_policy policies[] = {
#ifndef WARP7_FIP_MMAP
#ifndef IMX7_FIP_MMAP
[FIP_IMAGE_ID] = {
&mmc_dev_handle,
(uintptr_t)&mmc_fip_spec,
@ -190,7 +190,7 @@ static int open_fip(const uintptr_t spec)
return result;
}
#ifndef WARP7_FIP_MMAP
#ifndef IMX7_FIP_MMAP
static int open_mmc(const uintptr_t spec)
{
int result;
@ -240,11 +240,11 @@ int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
return result;
}
void plat_warp7_io_setup(void)
void plat_imx7_io_setup(void)
{
int result __unused;
#ifndef WARP7_FIP_MMAP
#ifndef IMX7_FIP_MMAP
result = register_io_dev_block(&mmc_dev_con);
assert(result == 0);

View File

@ -1,15 +1,15 @@
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
.global warp7_rotpk_hash
.global warp7_rotpk_hash_end
warp7_rotpk_hash:
.global imx7_rotpk_hash
.global imx7_rotpk_hash_end
imx7_rotpk_hash:
/* DER header */
.byte 0x30, 0x31, 0x30, 0x0D, 0x06, 0x09, 0x60, 0x86, 0x48
.byte 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, 0x20
/* SHA256 */
.incbin ROTPK_HASH
warp7_rotpk_hash_end:
imx7_rotpk_hash_end:

View File

@ -6,13 +6,13 @@
#include <plat/common/platform.h>
extern char warp7_rotpk_hash[], warp7_rotpk_hash_end[];
extern char imx7_rotpk_hash[], imx7_rotpk_hash_end[];
int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
unsigned int *flags)
{
*key_ptr = warp7_rotpk_hash;
*key_len = warp7_rotpk_hash_end - warp7_rotpk_hash;
*key_ptr = imx7_rotpk_hash;
*key_len = imx7_rotpk_hash_end - imx7_rotpk_hash;
*flags = ROTPK_IS_HASH;
return 0;

View File

@ -0,0 +1,20 @@
/*
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef IMX7_DEF_H
#define IMX7_DEF_H
#include <stdint.h>
/*******************************************************************************
* Function and variable prototypes
******************************************************************************/
void plat_imx7_io_setup(void);
void imx7_platform_setup(u_register_t arg1, u_register_t arg2,
u_register_t arg3, u_register_t arg4);
#endif /*IMX7_DEF_H */

View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@ -74,13 +74,13 @@
#define DRAM_LIMIT (DRAM_BASE + DRAM_SIZE)
/* Place OPTEE at minus 32 MB from the end of memory. 0x9e000000 - 0xa0000000 */
#define WARP7_OPTEE_SIZE 0x02000000
#define WARP7_OPTEE_BASE (DRAM_LIMIT - WARP7_OPTEE_SIZE)
#define WARP7_OPTEE_LIMIT (WARP7_OPTEE_BASE + WARP7_OPTEE_SIZE)
#define IMX7_OPTEE_SIZE 0x02000000
#define IMX7_OPTEE_BASE (DRAM_LIMIT - IMX7_OPTEE_SIZE)
#define IMX7_OPTEE_LIMIT (IMX7_OPTEE_BASE + IMX7_OPTEE_SIZE)
/* Place ATF directly beneath OPTEE. 0x9df00000 - 0x9e000000 */
#define BL2_RAM_SIZE 0x00100000
#define BL2_RAM_BASE (WARP7_OPTEE_BASE - BL2_RAM_SIZE)
#define BL2_RAM_BASE (IMX7_OPTEE_BASE - BL2_RAM_SIZE)
#define BL2_RAM_LIMIT (BL2_RAM_BASE + BL2_RAM_SIZE)
/* Optional Mailbox. Only relevant on i.MX7D. 0x9deff000 - 0x9df00000*/
@ -89,28 +89,28 @@
#define SHARED_RAM_LIMIT (SHARED_RAM_BASE + SHARED_RAM_SIZE)
/* Define the absolute location of u-boot 0x87800000 - 0x87900000 */
#define WARP7_UBOOT_SIZE 0x00100000
#define WARP7_UBOOT_BASE (DRAM_BASE + 0x7800000)
#define WARP7_UBOOT_LIMIT (WARP7_UBOOT_BASE + WARP7_UBOOT_SIZE)
#define IMX7_UBOOT_SIZE 0x00100000
#define IMX7_UBOOT_BASE (DRAM_BASE + 0x7800000)
#define IMX7_UBOOT_LIMIT (IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE)
/* Define FIP image absolute location 0x80000000 - 0x80100000 */
#define WARP7_FIP_SIZE 0x00100000
#define WARP7_FIP_BASE (DRAM_BASE)
#define WARP7_FIP_LIMIT (WARP7_FIP_BASE + WARP7_FIP_SIZE)
#define IMX7_FIP_SIZE 0x00100000
#define IMX7_FIP_BASE (DRAM_BASE)
#define IMX7_FIP_LIMIT (IMX7_FIP_BASE + IMX7_FIP_SIZE)
/* Define FIP image location at 1MB offset */
#define WARP7_FIP_MMC_BASE (1024 * 1024)
#define IMX7_FIP_MMC_BASE (1024 * 1024)
/* Define the absolute location of DTB 0x83000000 - 0x83100000 */
#define WARP7_DTB_SIZE 0x00100000
#define WARP7_DTB_BASE (DRAM_BASE + 0x03000000)
#define WARP7_DTB_LIMIT (WARP7_DTB_BASE + WARP7_DTB_SIZE)
#define IMX7_DTB_SIZE 0x00100000
#define IMX7_DTB_BASE (DRAM_BASE + 0x03000000)
#define IMX7_DTB_LIMIT (IMX7_DTB_BASE + IMX7_DTB_SIZE)
/* Define the absolute location of DTB Overlay 0x83100000 - 0x83101000 */
#define WARP7_DTB_OVERLAY_SIZE 0x00001000
#define WARP7_DTB_OVERLAY_BASE WARP7_DTB_LIMIT
#define WARP7_DTB_OVERLAY_LIMIT (WARP7_DTB_OVERLAY_BASE + \
WARP7_DTB_OVERLAY_SIZE)
#define IMX7_DTB_OVERLAY_SIZE 0x00001000
#define IMX7_DTB_OVERLAY_BASE IMX7_DTB_LIMIT
#define IMX7_DTB_OVERLAY_LIMIT (IMX7_DTB_OVERLAY_BASE + \
IMX7_DTB_OVERLAY_SIZE)
/*
* BL2 specific defines.
@ -124,14 +124,14 @@
/*
* BL3-2/OPTEE
*/
# define BL32_BASE WARP7_OPTEE_BASE
# define BL32_LIMIT (WARP7_OPTEE_BASE + WARP7_OPTEE_SIZE)
# define BL32_BASE IMX7_OPTEE_BASE
# define BL32_LIMIT (IMX7_OPTEE_BASE + IMX7_OPTEE_SIZE)
/*
* BL3-3/U-BOOT
*/
#define BL33_BASE WARP7_UBOOT_BASE
#define BL33_LIMIT (WARP7_UBOOT_BASE + WARP7_UBOOT_SIZE)
#define BL33_BASE IMX7_UBOOT_BASE
#define BL33_LIMIT (IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE)
/*
* ATF's view of memory
@ -189,9 +189,9 @@
#error "define PLAT_WARP7_UART=1 or PLAT_WARP7_UART=6"
#endif
#define PLAT_WARP7_BOOT_UART_BASE PLAT_WARP7_UART_BASE
#define PLAT_WARP7_BOOT_UART_CLK_IN_HZ 24000000
#define PLAT_WARP7_CONSOLE_BAUDRATE 115200
#define PLAT_IMX7_BOOT_UART_BASE PLAT_WARP7_UART_BASE
#define PLAT_IMX7_BOOT_UART_CLK_IN_HZ 24000000
#define PLAT_IMX7_CONSOLE_BAUDRATE 115200
/* MMC defines */
#ifndef PLAT_WARP7_SD
@ -210,13 +210,6 @@
#define PLAT_WARP7_BOOT_MMC_BASE USDHC3_BASE
#endif /* PLAT_WARP7_SD == 3 */
/*
* GIC related constants
*/
#define GICD_BASE 0x31001000
#define GICC_BASE 0x31002000
#define GICR_BASE 0
/*
* System counter
*/

View File

@ -4,106 +4,21 @@
# SPDX-License-Identifier: BSD-3-Clause
#
# Architecture
$(eval $(call add_define,ARMV7_SUPPORTS_LARGE_PAGE_ADDRESSING))
# Tune compiler for Cortex-A7
ifeq ($(notdir $(CC)),armclang)
TF_CFLAGS += -mfpu=neon
ASFLAGS += -mfpu=neon
else ifneq ($(findstring clang,$(notdir $(CC))),)
TF_CFLAGS += -mfpu=neon
ASFLAGS += -mfpu=neon
else
TF_CFLAGS += -mfpu=neon
ASFLAGS += -mfpu=neon
endif
# Include imx7 common
include plat/imx/imx7/common/imx7.mk
# Platform
PLAT_INCLUDES := -Idrivers/imx/uart \
-Iplat/imx/common/include/ \
-Iplat/imx/imx7/warp7/include \
-Idrivers/imx/timer \
-Idrivers/imx/usdhc \
-Iplat/imx/imx7/include
PLAT_INCLUDES += -Iplat/imx/imx7/warp7/include
# Translation tables library
include lib/xlat_tables_v2/xlat_tables.mk
BL2_SOURCES += common/desc_image_load.c \
drivers/delay_timer/delay_timer.c \
drivers/mmc/mmc.c \
drivers/io/io_block.c \
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
drivers/io/io_storage.c \
drivers/imx/timer/imx_gpt.c \
drivers/imx/uart/imx_uart.c \
drivers/imx/uart/imx_crash_uart.S \
drivers/imx/usdhc/imx_usdhc.c \
lib/aarch32/arm32_aeabi_divmod.c \
lib/aarch32/arm32_aeabi_divmod_a32.S \
lib/cpus/aarch32/cortex_a7.S \
lib/optee/optee_utils.c \
plat/imx/common/imx_aips.c \
plat/imx/common/imx_caam.c \
plat/imx/common/imx_clock.c \
plat/imx/common/imx_csu.c \
plat/imx/common/imx_io_mux.c \
plat/imx/common/imx_snvs.c \
plat/imx/common/imx_wdog.c \
plat/imx/common/imx7_clock.c \
plat/imx/imx7/warp7/aarch32/warp7_helpers.S \
plat/imx/imx7/warp7/warp7_bl2_el3_setup.c \
plat/imx/imx7/warp7/warp7_bl2_mem_params_desc.c \
plat/imx/imx7/warp7/warp7_io_storage.c \
plat/imx/imx7/warp7/warp7_image_load.c \
plat/imx/common/aarch32/imx_uart_console.S \
${XLAT_TABLES_LIB_SRCS}
ifneq (${TRUSTED_BOARD_BOOT},0)
include drivers/auth/mbedtls/mbedtls_crypto.mk
include drivers/auth/mbedtls/mbedtls_x509.mk
AUTH_SOURCES := drivers/auth/auth_mod.c \
drivers/auth/crypto_mod.c \
drivers/auth/img_parser_mod.c \
drivers/auth/tbbr/tbbr_cot.c
BL2_SOURCES += ${AUTH_SOURCES} \
plat/common/tbbr/plat_tbbr.c \
plat/imx/imx7/warp7/warp7_trusted_boot.c \
plat/imx/imx7/warp7/warp7_rotpk.S
ROT_KEY = $(BUILD_PLAT)/rot_key.pem
ROTPK_HASH = $(BUILD_PLAT)/rotpk_sha256.bin
$(eval $(call add_define_val,ROTPK_HASH,'"$(ROTPK_HASH)"'))
$(eval $(call MAKE_LIB_DIRS))
$(BUILD_PLAT)/bl2/warp7_rotpk.o: $(ROTPK_HASH)
certificates: $(ROT_KEY)
$(ROT_KEY): | $(BUILD_PLAT)
@echo " OPENSSL $@"
@if [ ! -f $(ROT_KEY) ]; then \
openssl genrsa 2048 > $@ 2>/dev/null; \
fi
$(ROTPK_HASH): $(ROT_KEY)
@echo " OPENSSL $@"
$(Q)openssl rsa -in $< -pubout -outform DER 2>/dev/null |\
openssl dgst -sha256 -binary > $@ 2>/dev/null
endif
BL2_SOURCES += drivers/imx/usdhc/imx_usdhc.c \
plat/imx/imx7/warp7/warp7_bl2_el3_setup.c
# Build config flags
# ------------------
ARM_CORTEX_A7 := yes
WORKAROUND_CVE_2017_5715 := 0
# Enable reset to BL31 by default
RESET_TO_BL31 := 0
# Non-TF Boot ROM
@ -118,28 +33,5 @@ SEPARATE_CODE_AND_RODATA := 1
# Use Coherent memory
USE_COHERENT_MEM := 1
# PLAT_WARP7_UART
PLAT_WARP7_UART :=1
$(eval $(call add_define,PLAT_WARP7_UART))
# Add the build options to pack BLx images and kernel device tree
# in the FIP if the platform requires.
ifneq ($(BL2),)
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
endif
ifneq ($(BL32_EXTRA1),)
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
endif
ifneq ($(BL32_EXTRA2),)
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
endif
ifneq ($(HW_CONFIG),)
$(eval $(call TOOL_ADD_IMG,HW_CONFIG,--hw-config))
endif
# Verify build config
# -------------------
ifeq (${ARCH},aarch64)
$(error Error: AArch64 not supported on i.mx7)
endif

View File

@ -1,5 +1,5 @@
/*
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
* Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@ -8,30 +8,17 @@
#include <platform_def.h>
#include <arch_helpers.h>
#include <common/bl_common.h>
#include <common/debug.h>
#include <common/desc_image_load.h>
#include <drivers/console.h>
#include <drivers/mmc.h>
#include <lib/xlat_tables/xlat_mmu_helpers.h>
#include <lib/xlat_tables/xlat_tables_defs.h>
#include <lib/mmio.h>
#include <lib/optee_utils.h>
#include <lib/utils.h>
#include <imx_aips.h>
#include <imx_caam.h>
#include <imx_clock.h>
#include <imx_csu.h>
#include <imx_gpt.h>
#include <imx_io_mux.h>
#include <imx_uart.h>
#include <imx_snvs.h>
#include <imx_usdhc.h>
#include <imx_wdog.h>
#include "warp7_private.h"
#include <imx7_def.h>
#define UART1_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\
CCM_TRGT_MUX_UART1_CLK_ROOT_OSC_24M)
@ -43,102 +30,9 @@
CCM_TRGT_MUX_NAND_USDHC_BUS_CLK_ROOT_AHB |\
CCM_TARGET_POST_PODF(2))
#define WDOG_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\
CCM_TRGT_MUX_WDOG_CLK_ROOT_OSC_24M)
#define USB_CLK_SELECT (CCM_TARGET_ROOT_ENABLE |\
CCM_TRGT_MUX_USB_HSIC_CLK_ROOT_SYS_PLL)
uintptr_t plat_get_ns_image_entrypoint(void)
{
return WARP7_UBOOT_BASE;
}
static uint32_t warp7_get_spsr_for_bl32_entry(void)
{
return SPSR_MODE32(MODE32_svc, SPSR_T_ARM, SPSR_E_LITTLE,
DISABLE_ALL_EXCEPTIONS);
}
static uint32_t warp7_get_spsr_for_bl33_entry(void)
{
return SPSR_MODE32(MODE32_svc,
plat_get_ns_image_entrypoint() & 0x1,
SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
}
#ifndef AARCH32_SP_OPTEE
#error "Must build with OPTEE support included"
#endif
int bl2_plat_handle_post_image_load(unsigned int image_id)
{
int err = 0;
bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
bl_mem_params_node_t *hw_cfg_mem_params = NULL;
bl_mem_params_node_t *pager_mem_params = NULL;
bl_mem_params_node_t *paged_mem_params = NULL;
assert(bl_mem_params);
switch (image_id) {
case BL32_IMAGE_ID:
pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
assert(pager_mem_params);
paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
assert(paged_mem_params);
err = parse_optee_header(&bl_mem_params->ep_info,
&pager_mem_params->image_info,
&paged_mem_params->image_info);
if (err != 0)
WARN("OPTEE header parse error.\n");
/*
* When ATF loads the DTB the address of the DTB is passed in
* arg2, if an hw config image is present use the base address
* as DTB address an pass it as arg2
*/
hw_cfg_mem_params = get_bl_mem_params_node(HW_CONFIG_ID);
bl_mem_params->ep_info.args.arg0 =
bl_mem_params->ep_info.args.arg1;
bl_mem_params->ep_info.args.arg1 = 0;
if (hw_cfg_mem_params)
bl_mem_params->ep_info.args.arg2 =
hw_cfg_mem_params->image_info.image_base;
else
bl_mem_params->ep_info.args.arg2 = 0;
bl_mem_params->ep_info.args.arg3 = 0;
bl_mem_params->ep_info.spsr = warp7_get_spsr_for_bl32_entry();
break;
case BL33_IMAGE_ID:
/* AArch32 only core: OP-TEE expects NSec EP in register LR */
pager_mem_params = get_bl_mem_params_node(BL32_IMAGE_ID);
assert(pager_mem_params);
pager_mem_params->ep_info.lr_svc = bl_mem_params->ep_info.pc;
/* BL33 expects to receive the primary CPU MPID (through r0) */
bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
bl_mem_params->ep_info.spsr = warp7_get_spsr_for_bl33_entry();
break;
default:
/* Do nothing in default case */
break;
}
return err;
}
void bl2_el3_plat_arch_setup(void)
{
/* Setup the MMU here */
}
#define WARP7_UART1_TX_MUX \
IOMUXC_SW_MUX_CTL_PAD_UART1_TX_DATA_ALT0_UART1_TX_DATA
@ -215,29 +109,6 @@ static void warp7_usdhc_setup(void)
imx_usdhc_init(&params, &info);
}
static void warp7_setup_system_counter(void)
{
unsigned long freq = SYS_COUNTER_FREQ_IN_TICKS;
/* Set the frequency table index to our target frequency */
write_cntfrq(freq);
/* Enable system counter @ frequency table index 0, halt on debug */
mmio_write_32(SYS_CNTCTL_BASE + CNTCR_OFF,
CNTCR_FCREQ(0) | CNTCR_HDBG | CNTCR_EN);
}
static void warp7_setup_wdog_clocks(void)
{
uint32_t wdog_en_bits = (uint32_t)WDOG_CLK_SELECT;
imx_clock_set_wdog_clk_root_bits(wdog_en_bits);
imx_clock_enable_wdog(0);
imx_clock_enable_wdog(1);
imx_clock_enable_wdog(2);
imx_clock_enable_wdog(3);
}
static void warp7_setup_usb_clocks(void)
{
uint32_t usb_en_bits = (uint32_t)USB_CLK_SELECT;
@ -248,67 +119,24 @@ static void warp7_setup_usb_clocks(void)
imx_clock_enable_usb(CCM_CCGR_ID_USB_OTG1_PHY);
imx_clock_enable_usb(CCM_CCGR_ID_USB_OTG2_PHY);
}
/*
* bl2_el3_early_platform_setup()
* MMU off
*/
void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
u_register_t arg3, u_register_t arg4)
void imx7_platform_setup(u_register_t arg1, u_register_t arg2,
u_register_t arg3, u_register_t arg4)
{
uint32_t uart1_en_bits = (uint32_t)UART1_CLK_SELECT;
uint32_t uart6_en_bits = (uint32_t)UART6_CLK_SELECT;
uint32_t usdhc_clock_sel = PLAT_WARP7_SD - 1;
static console_imx_uart_t console;
int console_scope = CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME;
/* Initialize the AIPS */
imx_aips_init();
imx_csu_init();
imx_snvs_init();
imx_gpt_ops_init(GPT1_BASE_ADDR);
/* Initialize clocks, regulators, pin-muxes etc */
imx_clock_init();
/* Initialize clocks etc */
imx_clock_enable_uart(0, uart1_en_bits);
imx_clock_enable_uart(5, uart6_en_bits);
imx_clock_enable_usdhc(usdhc_clock_sel, USDHC_CLK_SELECT);
warp7_setup_system_counter();
warp7_setup_wdog_clocks();
warp7_setup_usb_clocks();
/* Setup pin-muxes */
warp7_setup_pinmux();
/* Init UART, storage and friends */
console_imx_uart_register(PLAT_WARP7_BOOT_UART_BASE,
PLAT_WARP7_BOOT_UART_CLK_IN_HZ,
PLAT_WARP7_CONSOLE_BAUDRATE,
&console);
console_set_scope(&console.console, console_scope);
warp7_usdhc_setup();
/* Open handles to persistent storage */
plat_warp7_io_setup();
/* Setup higher-level functionality CAAM, RTC etc */
imx_caam_init();
imx_wdog_init();
/* Print out the expected memory map */
VERBOSE("\tOPTEE 0x%08x-0x%08x\n", WARP7_OPTEE_BASE, WARP7_OPTEE_LIMIT);
VERBOSE("\tATF/BL2 0x%08x-0x%08x\n", BL2_RAM_BASE, BL2_RAM_LIMIT);
VERBOSE("\tSHRAM 0x%08x-0x%08x\n", SHARED_RAM_BASE, SHARED_RAM_LIMIT);
VERBOSE("\tFIP 0x%08x-0x%08x\n", WARP7_FIP_BASE, WARP7_FIP_LIMIT);
VERBOSE("\tDTB-OVERLAY 0x%08x-0x%08x\n", WARP7_DTB_OVERLAY_BASE, WARP7_DTB_OVERLAY_LIMIT);
VERBOSE("\tDTB 0x%08x-0x%08x\n", WARP7_DTB_BASE, WARP7_DTB_LIMIT);
VERBOSE("\tUBOOT/BL33 0x%08x-0x%08x\n", WARP7_UBOOT_BASE, WARP7_UBOOT_LIMIT);
}
/*
* bl2_platform_setup()
* MMU on - enabled by bl2_el3_plat_arch_setup()
*/
void bl2_platform_setup(void)
{
}

View File

@ -1,15 +0,0 @@
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef WARP7_PRIVATE_H
#define WARP7_PRIVATE_H
/*******************************************************************************
* Function and variable prototypes
******************************************************************************/
void plat_warp7_io_setup(void);
#endif /* WARP7_PRIVATE_H */