stm32mp1: Add Avenger96 board support
Add board support for Avenger96 board from Arrow Electronics. This board is based on STM32MP157A SoC and is one of the 96Boards Consumer Edition platform. More information about this board can be found in 96Boards website: https://www.96boards.org/product/avenger96/ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Change-Id: Ic905f26c38d03883c6e4ea221b4b275a4b534857
This commit is contained in:
Manivannan Sadhasivam
parent
c3e4e0888d
commit
cdf3d1a98b
|
|
@ -273,6 +273,19 @@
|
|||
};
|
||||
};
|
||||
|
||||
uart4_pins_b: uart4-1 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
slew-rate = <0>;
|
||||
};
|
||||
pins2 {
|
||||
pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
usart3_pins_a: usart3-0 {
|
||||
pins1 {
|
||||
pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,283 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) Arrow Electronics 2019 - All Rights Reserved
|
||||
* Author: Botond Kardos <botond.kardos@arroweurope.com>
|
||||
*
|
||||
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
|
||||
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp157c.dtsi"
|
||||
#include "stm32mp157cac-pinctrl.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Arrow Electronics STM32MP157A Avenger96 board";
|
||||
compatible = "st,stm32mp157a-avenger96", "st,stm32mp157";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart4;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_pins_a>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
pmic: stpmic@33 {
|
||||
compatible = "st,stpmic1";
|
||||
reg = <0x33>;
|
||||
interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
status = "okay";
|
||||
|
||||
st,main-control-register = <0x04>;
|
||||
st,vin-control-register = <0xc0>;
|
||||
st,usb-control-register = <0x20>;
|
||||
|
||||
regulators {
|
||||
compatible = "st,stpmic1-regulators";
|
||||
|
||||
ldo1-supply = <&v3v3>;
|
||||
ldo2-supply = <&v3v3>;
|
||||
ldo3-supply = <&vdd_ddr>;
|
||||
ldo5-supply = <&v3v3>;
|
||||
ldo6-supply = <&v3v3>;
|
||||
|
||||
vddcore: buck1 {
|
||||
regulator-name = "vddcore";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_ddr: buck2 {
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd: buck3 {
|
||||
regulator-name = "vdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
st,mask-reset;
|
||||
regulator-initial-mode = <0>;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
v3v3: buck4 {
|
||||
regulator-name = "v3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
regulator-initial-mode = <0>;
|
||||
};
|
||||
|
||||
vdda: ldo1 {
|
||||
regulator-name = "vdda";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
v2v8: ldo2 {
|
||||
regulator-name = "v2v8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
vtt_ddr: ldo3 {
|
||||
regulator-name = "vtt_ddr";
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
|
||||
vdd_usb: ldo4 {
|
||||
regulator-name = "vdd_usb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vdd_sd: ldo5 {
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
v1v8: ldo6 {
|
||||
regulator-name = "v1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vref_ddr: vref_ddr {
|
||||
regulator-name = "vref_ddr";
|
||||
regulator-always-on;
|
||||
regulator-over-current-protection;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&iwdg2 {
|
||||
timeout-sec = <32>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rng1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
|
||||
broken-cd;
|
||||
st,sig-dir;
|
||||
st,neg-edge;
|
||||
st,use-ckin;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&vdda>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* ATF Specific */
|
||||
#include <dt-bindings/clock/stm32mp1-clksrc.h>
|
||||
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
|
||||
#include "stm32mp157c-security.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
gpio0 = &gpioa;
|
||||
gpio1 = &gpiob;
|
||||
gpio2 = &gpioc;
|
||||
gpio3 = &gpiod;
|
||||
gpio4 = &gpioe;
|
||||
gpio5 = &gpiof;
|
||||
gpio6 = &gpiog;
|
||||
gpio7 = &gpioh;
|
||||
gpio8 = &gpioi;
|
||||
gpio25 = &gpioz;
|
||||
i2c3 = &i2c4;
|
||||
};
|
||||
};
|
||||
|
||||
/* CLOCK init */
|
||||
&rcc {
|
||||
secure-status = "disabled";
|
||||
st,clksrc = <
|
||||
CLK_MPU_PLL1P
|
||||
CLK_AXI_PLL2P
|
||||
CLK_MCU_PLL3P
|
||||
CLK_PLL12_HSE
|
||||
CLK_PLL3_HSE
|
||||
CLK_PLL4_HSE
|
||||
CLK_RTC_LSE
|
||||
CLK_MCO1_DISABLED
|
||||
CLK_MCO2_DISABLED
|
||||
>;
|
||||
|
||||
st,clkdiv = <
|
||||
1 /*MPU*/
|
||||
0 /*AXI*/
|
||||
0 /*MCU*/
|
||||
1 /*APB1*/
|
||||
1 /*APB2*/
|
||||
1 /*APB3*/
|
||||
1 /*APB4*/
|
||||
2 /*APB5*/
|
||||
23 /*RTC*/
|
||||
0 /*MCO1*/
|
||||
0 /*MCO2*/
|
||||
>;
|
||||
|
||||
st,pkcs = <
|
||||
CLK_CKPER_HSE
|
||||
CLK_FMC_ACLK
|
||||
CLK_QSPI_ACLK
|
||||
CLK_ETH_DISABLED
|
||||
CLK_SDMMC12_PLL4P
|
||||
CLK_DSI_DSIPLL
|
||||
CLK_STGEN_HSE
|
||||
CLK_USBPHY_HSE
|
||||
CLK_SPI2S1_PLL3Q
|
||||
CLK_SPI2S23_PLL3Q
|
||||
CLK_SPI45_HSI
|
||||
CLK_SPI6_HSI
|
||||
CLK_I2C46_HSI
|
||||
CLK_SDMMC3_PLL4P
|
||||
CLK_USBO_USBPHY
|
||||
CLK_ADC_CKPER
|
||||
CLK_CEC_LSE
|
||||
CLK_I2C12_HSI
|
||||
CLK_I2C35_HSI
|
||||
CLK_UART1_HSI
|
||||
CLK_UART24_HSI
|
||||
CLK_UART35_HSI
|
||||
CLK_UART6_HSI
|
||||
CLK_UART78_HSI
|
||||
CLK_SPDIF_PLL4P
|
||||
CLK_FDCAN_PLL4Q
|
||||
CLK_SAI1_PLL3Q
|
||||
CLK_SAI2_PLL3Q
|
||||
CLK_SAI3_PLL3Q
|
||||
CLK_SAI4_PLL3Q
|
||||
CLK_RNG1_LSI
|
||||
CLK_RNG2_LSI
|
||||
CLK_LPTIM1_PCLK1
|
||||
CLK_LPTIM23_PCLK3
|
||||
CLK_LPTIM45_LSE
|
||||
>;
|
||||
|
||||
/* VCO = 1300.0 MHz => P = 650 (CPU) */
|
||||
pll1: st,pll@0 {
|
||||
cfg = < 2 80 0 0 0 PQR(1,0,0) >;
|
||||
frac = < 0x800 >;
|
||||
};
|
||||
|
||||
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
|
||||
pll2: st,pll@1 {
|
||||
cfg = < 2 65 1 0 0 PQR(1,1,1) >;
|
||||
frac = < 0x1400 >;
|
||||
};
|
||||
|
||||
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
|
||||
pll3: st,pll@2 {
|
||||
cfg = < 1 33 1 16 36 PQR(1,1,1) >;
|
||||
frac = < 0x1a04 >;
|
||||
};
|
||||
|
||||
/* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */
|
||||
pll4: st,pll@3 {
|
||||
cfg = < 1 39 3 11 4 PQR(1,1,1) >;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue