andrius
/
arm-trusted-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge pull request #96 from vikramkanigiri:vk/tf-issues-133

This commit is contained in:
Andrew Thoelke 2014-05-22 12:54:55 +01:00
parent 6b8a852c99 d846780e89
commit df9cb6bd65
30 changed files with 1070 additions and 841 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Makefile
View File

@ -47,6 +47,8 @@ SPD := none
BASE_COMMIT := origin/master
# NS timer register save and restore
NS_TIMER_SWITCH := 0
# By default, Bl1 acts as the reset handler, not BL31
RESET_TO_BL31 := 0
# Checkpatch ignores
@ -178,6 +180,10 @@ endif
$(eval $(call assert_boolean,NS_TIMER_SWITCH))
$(eval $(call add_define,NS_TIMER_SWITCH))
# Process RESET_TO_BL31 flag
$(eval $(call assert_boolean,RESET_TO_BL31))
$(eval $(call add_define,RESET_TO_BL31))
ASFLAGS += -nostdinc -ffreestanding -Wa,--fatal-warnings \
-mgeneral-regs-only -D__ASSEMBLY__ \
${DEFINES} ${INCLUDES}

63
bl1/aarch64/bl1_entrypoint.S
View File

@ -98,31 +98,10 @@ func bl1_entrypoint
msr sctlr_el3, x0
isb
_wait_for_entrypoint:
/* ---------------------------------------------
* Find the type of reset and jump to handler
* if present. If the handler is null then it is
* a cold boot. The primary cpu will set up the
* platform while the secondaries wait for
* their turn to be woken up
* ---------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_get_entrypoint
cbnz x0, _do_warm_boot
mrs x0, mpidr_el1
bl platform_is_primary_cpu
cbnz x0, _do_cold_boot
wait_for_entrypoint
/* ---------------------------------------------
* Perform any platform specific secondary cpu
* actions
* ---------------------------------------------
*/
bl plat_secondary_cold_boot_setup
b _wait_for_entrypoint
bl platform_mem_init
_do_cold_boot:
/* ---------------------------------------------
* Init C runtime environment.
* - Zero-initialise the NOBITS sections.
@ -148,19 +127,37 @@ _do_cold_boot:
bl memcpy16
/* ---------------------------------------------
* Initialize platform and jump to our c-entry
* point for this type of reset
* Give ourselves a small coherent stack to
* ease the pain of initializing the MMU and
* CCI in assembler
* ---------------------------------------------
*/
adr x0, bl1_main
bl platform_cold_boot_init
b _panic
mrs x0, mpidr_el1
bl platform_set_coherent_stack
_do_warm_boot:
/* ---------------------------------------------
* Jump to BL31 for all warm boot init.
* Architectural init. can be generic e.g.
* enabling stack alignment and platform spec-
* ific e.g. MMU & page table setup as per the
* platform memory map. Perform the latter here
* and the former in bl1_main.
* ---------------------------------------------
*/
blr x0
_panic:
b _panic
bl bl1_early_platform_setup
bl bl1_plat_arch_setup
/* ---------------------------------------------
* Give ourselves a stack allocated in Normal
* -IS-WBWA memory
* ---------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_set_stack
/* -----------------------------------------------
* Initialize platform and jump to our c-entry point for this type
* of reset. Panic if it returns
* -----------------------------------------------
*/
bl bl1_main
panic:
b panic

97
bl1/aarch64/bl1_exceptions.S
View File

@ -112,13 +112,51 @@ SErrorSPx:
*/
.align 7
SynchronousExceptionA64:
/* ---------------------------------------------
/* ------------------------------------------------
* Only a single SMC exception from BL2 to ask
* BL1 to pass EL3 control to BL31 is expected
* here.
* ---------------------------------------------
* It expects X0 with RUN_IMAGE SMC function id
* X1 with address of a el_change_info_t structure
* describing the BL3-1 entrypoint
* ------------------------------------------------
*/
b process_exception
mov x19, x0
mov x20, x1
mrs x0, esr_el3
ubfx x1, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
cmp x1, #EC_AARCH64_SMC
b.ne panic
mov x0, #RUN_IMAGE
cmp x19, x0
b.ne panic
mov x0, x20
bl display_boot_progress
ldp x0, x1, [x20, #EL_CHANGE_INFO_PC_OFFSET]
msr elr_el3, x0
msr spsr_el3, x1
ubfx x0, x1, #MODE_EL_SHIFT, #2
cmp x0, #MODE_EL3
b.ne panic
bl disable_mmu_icache_el3
tlbi alle3
ldp x6, x7, [x20, #(EL_CHANGE_INFO_ARGS_OFFSET + 0x30)]
ldp x4, x5, [x20, #(EL_CHANGE_INFO_ARGS_OFFSET + 0x20)]
ldp x2, x3, [x20, #(EL_CHANGE_INFO_ARGS_OFFSET + 0x10)]
ldp x0, x1, [x20, #(EL_CHANGE_INFO_ARGS_OFFSET + 0x0)]
eret
panic:
mov x0, #SYNC_EXCEPTION_AARCH64
bl plat_report_exception
wfi
b panic
check_vector_size SynchronousExceptionA64
.align 7
@ -173,56 +211,3 @@ SErrorA32:
bl plat_report_exception
b SErrorA32
check_vector_size SErrorA32
.align 7
func process_exception
sub sp, sp, #0x40
stp x0, x1, [sp, #0x0]
stp x2, x3, [sp, #0x10]
stp x4, x5, [sp, #0x20]
stp x6, x7, [sp, #0x30]
mov x19, x0
mov x20, x1
mov x21, x2
mov x0, #SYNC_EXCEPTION_AARCH64
bl plat_report_exception
mrs x0, esr_el3
ubfx x1, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
cmp x1, #EC_AARCH64_SMC
b.ne panic
mov x1, #RUN_IMAGE
cmp x19, x1
b.ne panic
mov x0, x20
mov x1, x21
mov x2, x3
mov x3, x4
bl display_boot_progress
msr elr_el3, x20
msr spsr_el3, x21
ubfx x0, x21, #MODE_EL_SHIFT, #2
cmp x0, #MODE_EL3
b.ne skip_mmu_teardown
/* ---------------------------------------------
* If BL31 is to be executed in EL3 as well
* then turn off the MMU so that it can perform
* its own setup.
* ---------------------------------------------
*/
bl disable_mmu_icache_el3
tlbi alle3
skip_mmu_teardown:
ldp x6, x7, [sp, #0x30]
ldp x4, x5, [sp, #0x20]
ldp x2, x3, [sp, #0x10]
ldp x0, x1, [sp, #0x0]
add sp, sp, #0x40
eret
panic:
wfi
b panic

99
bl1/bl1_main.c
View File

@ -33,10 +33,39 @@
#include <assert.h>
#include <bl_common.h>
#include <bl1.h>
#include <debug.h>
#include <platform.h>
#include <stdio.h>
#include "bl1_private.h"
/*******************************************************************************
* Runs BL2 from the given entry point. It results in dropping the
* exception level
******************************************************************************/
static void __dead2 bl1_run_bl2(el_change_info_t *bl2_ep)
{
bl1_arch_next_el_setup();
/* Tell next EL what we want done */
bl2_ep->args.arg0 = RUN_IMAGE;
if (GET_SECURITY_STATE(bl2_ep->h.attr) == NON_SECURE)
change_security_state(GET_SECURITY_STATE(bl2_ep->h.attr));
write_spsr_el3(bl2_ep->spsr);
write_elr_el3(bl2_ep->pc);
eret(bl2_ep->args.arg0,
bl2_ep->args.arg1,
bl2_ep->args.arg2,
bl2_ep->args.arg3,
bl2_ep->args.arg4,
bl2_ep->args.arg5,
bl2_ep->args.arg6,
bl2_ep->args.arg7);
}
/*******************************************************************************
* Function to perform late architectural and platform specific initialization.
* It also locates and loads the BL2 raw binary image in the trusted DRAM. Only
@ -49,10 +78,12 @@ void bl1_main(void)
#if DEBUG
unsigned long sctlr_el3 = read_sctlr_el3();
#endif
unsigned long bl2_base;
unsigned int load_type = TOP_LOAD, spsr;
unsigned int load_type = TOP_LOAD;
image_info_t bl2_image_info = { {0} };
el_change_info_t bl2_ep = { {0} };
meminfo_t *bl1_tzram_layout;
meminfo_t *bl2_tzram_layout = 0x0;
int err;
/*
* Ensure that MMU/Caches and coherency are turned on
@ -71,15 +102,28 @@ void bl1_main(void)
printf(FIRMWARE_WELCOME_STR);
printf("%s\n\r", build_message);
SET_PARAM_HEAD(&bl2_image_info, PARAM_IMAGE_BINARY, VERSION_1, 0);
SET_PARAM_HEAD(&bl2_ep, PARAM_EP, VERSION_1, 0);
/*
* Find out how much free trusted ram remains after BL1 load
* & load the BL2 image at its top
*/
bl1_tzram_layout = bl1_plat_sec_mem_layout();
bl2_base = load_image(bl1_tzram_layout,
err = load_image(bl1_tzram_layout,
(const char *) BL2_IMAGE_NAME,
load_type, BL2_BASE);
load_type,
BL2_BASE,
&bl2_image_info,
&bl2_ep);
if (err) {
/*
* TODO: print failure to load BL2 but also add a tzwdog timer
* which will reset the system eventually.
*/
printf("Failed to load boot loader stage 2 (BL2) firmware.\n");
panic();
}
/*
* Create a new layout of memory for BL2 as seen by BL1 i.e.
* tell it the amount of total and free memory available.
@ -91,30 +135,20 @@ void bl1_main(void)
init_bl2_mem_layout(bl1_tzram_layout,
bl2_tzram_layout,
load_type,
bl2_base);
bl2_image_info.image_base);
if (bl2_base) {
bl1_arch_next_el_setup();
spsr = make_spsr(MODE_EL1, MODE_SP_ELX, MODE_RW_64);
printf("Booting trusted firmware boot loader stage 2\n\r");
bl1_plat_bl2_loaded(&bl2_image_info, &bl2_ep);
bl2_ep.args.arg1 = (unsigned long)bl2_tzram_layout;
printf("Booting trusted firmware boot loader stage 2\n");
#if DEBUG
printf("BL2 address = 0x%llx \n\r", (unsigned long long) bl2_base);
printf("BL2 cpsr = 0x%x \n\r", spsr);
printf("BL2 memory layout address = 0x%llx \n\r",
(unsigned long long) bl2_tzram_layout);
printf("BL2 address = 0x%llx\n",
(unsigned long long) bl2_ep.pc);
printf("BL2 cpsr = 0x%x\n", bl2_ep.spsr);
printf("BL2 memory layout address = 0x%llx\n",
(unsigned long long) bl2_tzram_layout);
#endif
run_image(bl2_base,
spsr,
SECURE,
(void *) bl2_tzram_layout,
NULL);
}
bl1_run_bl2(&bl2_ep);
/*
* TODO: print failure to load BL2 but also add a tzwdog timer
* which will reset the system eventually.
*/
printf("Failed to load boot loader stage 2 (BL2) firmware.\n\r");
return;
}
@ -122,17 +156,16 @@ void bl1_main(void)
* Temporary function to print the fact that BL2 has done its job and BL31 is
* about to be loaded. This is needed as long as printfs cannot be used
******************************************************************************/
void display_boot_progress(unsigned long entrypoint,
unsigned long spsr,
unsigned long mem_layout,
unsigned long ns_image_info)
void display_boot_progress(el_change_info_t *bl31_ep_info)
{
printf("Booting trusted firmware boot loader stage 3\n\r");
#if DEBUG
printf("BL31 address = 0x%llx \n\r", (unsigned long long) entrypoint);
printf("BL31 cpsr = 0x%llx \n\r", (unsigned long long)spsr);
printf("BL31 memory layout address = 0x%llx \n\r", (unsigned long long)mem_layout);
printf("BL31 non-trusted image info address = 0x%llx\n\r", (unsigned long long)ns_image_info);
printf("BL31 address = 0x%llx\n", (unsigned long long)bl31_ep_info->pc);
printf("BL31 cpsr = 0x%llx\n", (unsigned long long)bl31_ep_info->spsr);
printf("BL31 params address = 0x%llx\n",
(unsigned long long)bl31_ep_info->args.arg0);
printf("BL31 TF plat params address = 0x%llx\n",
(unsigned long long)bl31_ep_info->args.arg1);
#endif
return;
}

2
bl2/aarch64/bl2_entrypoint.S
View File

@ -46,7 +46,6 @@ func bl2_entrypoint
*/
mov x20, x0
mov x21, x1
mov x22, x2
/* ---------------------------------------------
* This is BL2 which is expected to be executed
@ -110,7 +109,6 @@ func bl2_entrypoint
* ---------------------------------------------
*/
mov x0, x21
mov x1, x22
bl bl2_early_platform_setup
bl bl2_plat_arch_setup

156
bl2/bl2_main.c
View File

@ -38,6 +38,25 @@
#include <stdio.h>
#include "bl2_private.h"
/*******************************************************************************
* Runs BL31 from the given entry point. It jumps to a higher exception level
* through an SMC.
******************************************************************************/
static void __dead2 bl2_run_bl31(el_change_info_t *bl31_ep_info,
unsigned long arg1,
unsigned long arg2)
{
/* Set the args pointer */
bl31_ep_info->args.arg0 = arg1;
bl31_ep_info->args.arg1 = arg2;
/* Flush the params to be passed to memory */
bl2_plat_flush_bl31_params();
smc(RUN_IMAGE, (unsigned long)bl31_ep_info, 0, 0, 0, 0, 0, 0);
}
/*******************************************************************************
* The only thing to do in BL2 is to load further images and pass control to
* BL31. The memory occupied by BL2 will be reclaimed by BL3_x stages. BL2 runs
@ -47,9 +66,12 @@
void bl2_main(void)
{
meminfo_t *bl2_tzram_layout;
bl31_args_t *bl2_to_bl31_args;
unsigned long bl31_base, bl32_base = 0, bl33_base, el_status;
unsigned int bl2_load, bl31_load, mode;
bl31_params_t *bl2_to_bl31_params;
unsigned int bl2_load, bl31_load;
el_change_info_t *bl31_ep_info;
meminfo_t bl32_mem_info;
meminfo_t bl33_mem_info;
int e;
/* Perform remaining generic architectural setup in S-El1 */
bl2_arch_setup();
@ -62,6 +84,13 @@ void bl2_main(void)
/* Find out how much free trusted ram remains after BL2 load */
bl2_tzram_layout = bl2_plat_sec_mem_layout();
/*
* Get a pointer to the memory the platform has set aside to pass
* information to BL31.
*/
bl2_to_bl31_params = bl2_plat_get_bl31_params();
bl31_ep_info = bl2_plat_get_bl31_ep();
/*
* Load BL31. BL1 tells BL2 whether it has been TOP or BOTTOM loaded.
* To avoid fragmentation of trusted SRAM memory, BL31 is always
@ -71,20 +100,39 @@ void bl2_main(void)
bl2_load = bl2_tzram_layout->attr & LOAD_MASK;
assert((bl2_load == TOP_LOAD) || (bl2_load == BOT_LOAD));
bl31_load = (bl2_load == TOP_LOAD) ? BOT_LOAD : TOP_LOAD;
bl31_base = load_image(bl2_tzram_layout, BL31_IMAGE_NAME,
bl31_load, BL31_BASE);
e = load_image(bl2_tzram_layout,
BL31_IMAGE_NAME,
bl31_load,
BL31_BASE,
bl2_to_bl31_params->bl31_image,
bl31_ep_info);
/* Assert if it has not been possible to load BL31 */
if (bl31_base == 0) {
if (e) {
ERROR("Failed to load BL3-1.\n");
panic();
}
/*
* Get a pointer to the memory the platform has set aside to pass
* information to BL31.
*/
bl2_to_bl31_args = bl2_get_bl31_args_ptr();
bl2_plat_bl31_post_load_actions(bl2_to_bl31_params->bl31_image,
bl31_ep_info);
bl2_plat_get_bl33_meminfo(&bl33_mem_info);
/* Load the BL33 image in non-secure memory provided by the platform */
e = load_image(&bl33_mem_info,
BL33_IMAGE_NAME,
BOT_LOAD,
plat_get_ns_image_entrypoint(),
bl2_to_bl31_params->bl33_image,
bl2_to_bl31_params->bl33_ep);
/* Halt if failed to load normal world firmware. */
if (e) {
ERROR("Failed to load BL3-3.\n");
panic();
}
bl2_plat_bl33_post_load_actions(bl2_to_bl31_params->bl33_image,
bl2_to_bl31_params->bl33_ep);
/*
* Load the BL32 image if there's one. It is upto to platform
@ -93,80 +141,30 @@ void bl2_main(void)
* completely different memory. A zero size indicates that the
* platform does not want to load a BL32 image.
*/
if (bl2_to_bl31_args->bl32_meminfo.total_size)
bl32_base = load_image(&bl2_to_bl31_args->bl32_meminfo,
BL32_IMAGE_NAME,
bl2_to_bl31_args->bl32_meminfo.attr &
LOAD_MASK,
BL32_BASE);
bl2_plat_get_bl32_meminfo(&bl32_mem_info);
if (bl32_mem_info.total_size) {
e = load_image(&bl32_mem_info,
BL32_IMAGE_NAME,
bl32_mem_info.attr &
LOAD_MASK,
BL32_BASE,
bl2_to_bl31_params->bl32_image,
bl2_to_bl31_params->bl32_ep);
/*
* Create a new layout of memory for BL31 as seen by BL2. This
* will gobble up all the BL2 memory.
*/
init_bl31_mem_layout(bl2_tzram_layout,
&bl2_to_bl31_args->bl31_meminfo,
bl31_load);
/* Load the BL33 image in non-secure memory provided by the platform */
bl33_base = load_image(&bl2_to_bl31_args->bl33_meminfo,
BL33_IMAGE_NAME,
BOT_LOAD,
plat_get_ns_image_entrypoint());
/* Halt if failed to load normal world firmware. */
if (bl33_base == 0) {
ERROR("Failed to load BL3-3.\n");
panic();
/* Halt if failed to load normal world firmware. */
if (e) {
WARN("Failed to load BL3-2.\n");
} else {
bl2_plat_bl32_post_load_actions(
bl2_to_bl31_params->bl32_image,
bl2_to_bl31_params->bl32_ep);
}
}
/*
* BL2 also needs to tell BL31 where the non-trusted software image
* is located.
*/
bl2_to_bl31_args->bl33_image_info.entrypoint = bl33_base;
/* Figure out what mode we enter the non-secure world in */
el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
el_status &= ID_AA64PFR0_ELX_MASK;
if (el_status)
mode = MODE_EL2;
else
mode = MODE_EL1;
/*
* TODO: Consider the possibility of specifying the SPSR in
* the FIP ToC and allowing the platform to have a say as
* well.
*/
bl2_to_bl31_args->bl33_image_info.spsr =
make_spsr(mode, MODE_SP_ELX, MODE_RW_64);
bl2_to_bl31_args->bl33_image_info.security_state = NON_SECURE;
if (bl32_base) {
/* Fill BL32 image info */
bl2_to_bl31_args->bl32_image_info.entrypoint = bl32_base;
bl2_to_bl31_args->bl32_image_info.security_state = SECURE;
/*
* The Secure Payload Dispatcher service is responsible for
* setting the SPSR prior to entry into the BL32 image.
*/
bl2_to_bl31_args->bl32_image_info.spsr = 0;
}
/* Flush the entire BL31 args buffer */
flush_dcache_range((unsigned long) bl2_to_bl31_args,
sizeof(*bl2_to_bl31_args));
/*
* Run BL31 via an SMC to BL1. Information on how to pass control to
* the BL32 (if present) and BL33 software images will be passed to
* BL31 as an argument.
*/
run_image(bl31_base,
make_spsr(MODE_EL3, MODE_SP_ELX, MODE_RW_64),
SECURE,
(void *) bl2_to_bl31_args,
NULL);
bl2_run_bl31(bl31_ep_info, (unsigned long)bl2_to_bl31_params, 0);
}

39
bl31/aarch64/bl31_entrypoint.S
View File

@ -44,13 +44,22 @@
*/
func bl31_entrypoint
/* ---------------------------------------------
* BL2 has populated x0 with the opcode
* indicating BL31 should be run, x3 with
* a pointer to a 'bl31_args' structure & x4
* with any other optional information
* ---------------------------------------------
/* ---------------------------------------------------------------
* BL2 has populated x0 with a pointer to a 'bl31_params'
* structure & x1 with a pointer to platform specific structure
* ---------------------------------------------------------------
*/
#if !RESET_TO_BL31
mov x20, x0
mov x21, x1
#endif
/* -----------------------------------------------------
* Perform any processor specific actions upon reset
* e.g. cache, tlb invalidations etc. Override the
* Boot ROM(BL0) programming sequence
* -----------------------------------------------------
*/
bl cpu_reset_handler
/* ---------------------------------------------
* Set the exception vector to something sane.
@ -90,17 +99,10 @@ func bl31_entrypoint
orr x1, x1, #SCTLR_I_BIT
msr sctlr_el3, x1
isb
/* ---------------------------------------------
* Check the opcodes out of paranoia.
* ---------------------------------------------
*/
mov x19, #RUN_IMAGE
cmp x0, x19
b.ne _panic
mov x20, x3
mov x21, x4
#if RESET_TO_BL31
wait_for_entrypoint
bl platform_mem_init
#else
/* ---------------------------------------------
* This is BL31 which is expected to be executed
* only by the primary cpu (at least for now).
@ -110,6 +112,7 @@ func bl31_entrypoint
mrs x0, mpidr_el1
bl platform_is_primary_cpu
cbz x0, _panic
#endif
/* ---------------------------------------------
* Zero out NOBITS sections. There are 2 of them:
@ -143,8 +146,10 @@ func bl31_entrypoint
* Perform platform specific early arch. setup
* ---------------------------------------------
*/
#if !RESET_TO_BL31
mov x0, x20
mov x1, x21
#endif
bl bl31_early_platform_setup
bl bl31_plat_arch_setup

1
bl31/bl31.mk
View File

@ -37,6 +37,7 @@ BL31_SOURCES += bl31/bl31_main.c \
bl31/aarch64/runtime_exceptions.S \
bl31/aarch64/crash_reporting.S \
common/aarch64/early_exceptions.S \
lib/aarch64/cpu_helpers.S \
lib/locks/bakery/bakery_lock.c \
lib/locks/exclusive/spinlock.S \
services/std_svc/std_svc_setup.c \

15
bl31/bl31_main.c
View File

@ -43,7 +43,7 @@
* for SP execution. In cases where both SPD and SP are absent, or when SPD
* finds it impossible to execute SP, this pointer is left as NULL
******************************************************************************/
static int32_t (*bl32_init)(meminfo_t *);
static int32_t (*bl32_init)(void);
/*******************************************************************************
* Variable to indicate whether next image to execute after BL31 is BL33
@ -114,11 +114,10 @@ void bl31_main(void)
*/
/*
* If SPD had registerd an init hook, invoke it. Pass it the information
* about memory extents
* If SPD had registerd an init hook, invoke it.
*/
if (bl32_init)
(*bl32_init)(bl31_plat_get_bl32_mem_layout());
(*bl32_init)();
/*
* We are ready to enter the next EL. Prepare entry into the image
@ -182,20 +181,20 @@ void bl31_prepare_next_image_entry()
* Tell the context mgmt. library to ensure that SP_EL3 points to
* the right context to exit from EL3 correctly.
*/
cm_set_el3_eret_context(next_image_info->security_state,
next_image_info->entrypoint,
cm_set_el3_eret_context(GET_SECURITY_STATE(next_image_info->h.attr),
next_image_info->pc,
next_image_info->spsr,
scr);
/* Finally set the next context */
cm_set_next_eret_context(next_image_info->security_state);
cm_set_next_eret_context(GET_SECURITY_STATE(next_image_info->h.attr));
}
/*******************************************************************************
* This function initializes the pointer to BL32 init function. This is expected
* to be called by the SPD after it finishes all its initialization
******************************************************************************/
void bl31_register_bl32_init(int32_t (*func)(meminfo_t *))
void bl31_register_bl32_init(int32_t (*func)(void))
{
bl32_init = func;
}

12
bl32/tsp/aarch64/tsp_entrypoint.S
View File

@ -55,16 +55,6 @@
func tsp_entrypoint
/*---------------------------------------------
* Store the extents of the tzram available to
* BL32 for future use.
* TODO: We are assuming that x9-x10 will not be
* corrupted by any function before platform
* setup.
* ---------------------------------------------
*/
mov x9, x0
mov x10, x1
/* ---------------------------------------------
* The entrypoint is expected to be executed
@ -119,8 +109,6 @@ func tsp_entrypoint
* specific early arch. setup e.g. mmu setup
* ---------------------------------------------
*/
mov x0, x9
mov x1, x10
bl bl32_early_platform_setup
bl bl32_plat_arch_setup

27
bl32/tsp/tsp_main.c
View File

@ -37,6 +37,13 @@
#include <stdio.h>
#include <tsp.h>
/*******************************************************************************
* Declarations of linker defined symbols which will help us find the layout
* of trusted SRAM
******************************************************************************/
extern unsigned long __RO_START__;
extern unsigned long __COHERENT_RAM_END__;
/*******************************************************************************
* Lock to control access to the console
******************************************************************************/
@ -66,6 +73,15 @@ static const entry_info_t tsp_entry_info = {
tsp_cpu_suspend_entry,
};
/*******************************************************************************
* The BL32 memory footprint starts with an RO sections and ends
* with a section for coherent RAM. Use it to find the memory size
******************************************************************************/
#define BL32_TOTAL_BASE (unsigned long)(&__RO_START__)
#define BL32_TOTAL_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
static tsp_args_t *set_smc_args(uint64_t arg0,
uint64_t arg1,
uint64_t arg2,
@ -107,10 +123,6 @@ uint64_t tsp_main(void)
uint64_t mpidr = read_mpidr();
uint32_t linear_id = platform_get_core_pos(mpidr);
#if DEBUG
meminfo_t *mem_layout = bl32_plat_sec_mem_layout();
#endif
/* Initialize the platform */
bl32_platform_setup();
@ -123,10 +135,9 @@ uint64_t tsp_main(void)
spin_lock(&console_lock);
printf("TSP %s\n\r", build_message);
INFO("Total memory base : 0x%x\n", mem_layout->total_base);
INFO("Total memory size : 0x%x bytes\n", mem_layout->total_size);
INFO("Free memory base : 0x%x\n", mem_layout->free_base);
INFO("Free memory size : 0x%x bytes\n", mem_layout->free_size);
INFO("Total memory base : 0x%x\n", (unsigned long)BL32_TOTAL_BASE);
INFO("Total memory size : 0x%x bytes\n",
(unsigned long)(BL32_TOTAL_LIMIT - BL32_TOTAL_BASE));
INFO("cpu 0x%x: %d smcs, %d erets %d cpu on requests\n", mpidr,
tsp_stats[linear_id].smc_count,
tsp_stats[linear_id].eret_count,

218
common/bl_common.c
View File

@ -35,6 +35,7 @@
#include <debug.h>
#include <io_storage.h>
#include <platform.h>
#include <errno.h>
#include <stdio.h>
unsigned long page_align(unsigned long value, unsigned dir)
@ -71,134 +72,12 @@ void change_security_state(unsigned int target_security_state)
write_scr(scr);
}
void __dead2 drop_el(aapcs64_params_t *args,
unsigned long spsr,
unsigned long entrypoint)
{
write_spsr_el3(spsr);
write_elr_el3(entrypoint);
eret(args->arg0,
args->arg1,
args->arg2,
args->arg3,
args->arg4,
args->arg5,
args->arg6,
args->arg7);
}
void __dead2 raise_el(aapcs64_params_t *args)
{
smc(args->arg0,
args->arg1,
args->arg2,
args->arg3,
args->arg4,
args->arg5,
args->arg6,
args->arg7);
}
/*
* TODO: If we are not EL3 then currently we only issue an SMC.
* Add support for dropping into EL0 etc. Consider adding support
* for switching from S-EL1 to S-EL0/1 etc.
*/
void __dead2 change_el(el_change_info_t *info)
{
if (IS_IN_EL3()) {
/*
* We can go anywhere from EL3. So find where.
* TODO: Lots to do if we are going non-secure.
* Flip the NS bit. Restore NS registers etc.
* Just doing the bare minimal for now.
*/
if (info->security_state == NON_SECURE)
change_security_state(info->security_state);
drop_el(&info->args, info->spsr, info->entrypoint);
} else
raise_el(&info->args);
}
/* TODO: add a parameter for DAIF. not needed right now */
unsigned long make_spsr(unsigned long target_el,
unsigned long target_sp,
unsigned long target_rw)
{
unsigned long spsr;
/* Disable all exceptions & setup the EL */
spsr = (DAIF_FIQ_BIT | DAIF_IRQ_BIT | DAIF_ABT_BIT | DAIF_DBG_BIT)
<< PSR_DAIF_SHIFT;
spsr |= PSR_MODE(target_rw, target_el, target_sp);
return spsr;
}
/*******************************************************************************
* The next two functions are the weak definitions. Platform specific
* code can override them if it wishes to.
* The next function is a weak definition. Platform specific
* code can override it if it wishes to.
******************************************************************************/
/*******************************************************************************
* Function that takes a memory layout into which BL31 has been either top or
* bottom loaded. Using this information, it populates bl31_mem_layout to tell
* BL31 how much memory it has access to and how much is available for use. It
* does not need the address where BL31 has been loaded as BL31 will reclaim
* all the memory used by BL2.
* TODO: Revisit if this and init_bl2_mem_layout can be replaced by a single
* routine.
******************************************************************************/
void init_bl31_mem_layout(const meminfo_t *bl2_mem_layout,
meminfo_t *bl31_mem_layout,
unsigned int load_type)
{
if (load_type == BOT_LOAD) {
/*
* ------------ ^
* | BL2 | |
* |----------| ^ | BL2
* | | | BL2 free | total
* | | | size | size
* |----------| BL2 free base v |
* | BL31 | |
* ------------ BL2 total base v
*/
unsigned long bl31_size;
bl31_mem_layout->free_base = bl2_mem_layout->free_base;
bl31_size = bl2_mem_layout->free_base - bl2_mem_layout->total_base;
bl31_mem_layout->free_size = bl2_mem_layout->total_size - bl31_size;
} else {
/*
* ------------ ^
* | BL31 | |
* |----------| ^ | BL2
* | | | BL2 free | total
* | | | size | size
* |----------| BL2 free base v |
* | BL2 | |
* ------------ BL2 total base v
*/
unsigned long bl2_size;
bl31_mem_layout->free_base = bl2_mem_layout->total_base;
bl2_size = bl2_mem_layout->free_base - bl2_mem_layout->total_base;
bl31_mem_layout->free_size = bl2_mem_layout->free_size + bl2_size;
}
bl31_mem_layout->total_base = bl2_mem_layout->total_base;
bl31_mem_layout->total_size = bl2_mem_layout->total_size;
bl31_mem_layout->attr = load_type;
flush_dcache_range((unsigned long) bl31_mem_layout, sizeof(meminfo_t));
return;
}
/*******************************************************************************
* Function that takes a memory layout into which BL2 has been either top or
* bottom loaded along with the address where BL2 has been loaded in it. Using
@ -294,12 +173,15 @@ unsigned long image_size(const char *image_name)
* Generic function to load an image into the trusted RAM,
* given a name, extents of free memory & whether the image should be loaded at
* the bottom or top of the free memory. It updates the memory layout if the
* load is successful.
* load is successful. It also updates the image information and the entry point
* information in the params passed
******************************************************************************/
unsigned long load_image(meminfo_t *mem_layout,
int load_image(meminfo_t *mem_layout,
const char *image_name,
unsigned int load_type,
unsigned long fixed_addr)
unsigned long fixed_addr,
image_info_t *image_data,
el_change_info_t *entry_point_info)
{
uintptr_t dev_handle;
uintptr_t image_handle;
@ -313,13 +195,14 @@ unsigned long load_image(meminfo_t *mem_layout,
assert(mem_layout != NULL);
assert(image_name != NULL);
assert(image_data->h.version >= VERSION_1);
/* Obtain a reference to the image by querying the platform layer */
io_result = plat_get_image_source(image_name, &dev_handle, &image_spec);
if (io_result != IO_SUCCESS) {
WARN("Failed to obtain reference to image '%s' (%i)\n",
image_name, io_result);
return 0;
return io_result;
}
/* Attempt to access the image */
@ -327,7 +210,7 @@ unsigned long load_image(meminfo_t *mem_layout,
if (io_result != IO_SUCCESS) {
WARN("Failed to access image '%s' (%i)\n",
image_name, io_result);
return 0;
return io_result;
}
/* Find the size of the image */
@ -335,7 +218,7 @@ unsigned long load_image(meminfo_t *mem_layout,
if ((io_result != IO_SUCCESS) || (image_size == 0)) {
WARN("Failed to determine the size of the image '%s' file (%i)\n",
image_name, io_result);
goto fail;
goto exit;
}
/* See if we have enough space */
@ -343,7 +226,7 @@ unsigned long load_image(meminfo_t *mem_layout,
WARN("Cannot load '%s' file: Not enough space.\n",
image_name);
dump_load_info(0, image_size, mem_layout);
goto fail;
goto exit;
}
switch (load_type) {
@ -362,7 +245,8 @@ unsigned long load_image(meminfo_t *mem_layout,
WARN("Cannot load '%s' file: Not enough space.\n",
image_name);
dump_load_info(image_base, image_size, mem_layout);
goto fail;
io_result = -ENOMEM;
goto exit;
}
/* Calculate the amount of extra memory used due to alignment */
@ -380,10 +264,11 @@ unsigned long load_image(meminfo_t *mem_layout,
/* Page align base address and check whether the image still fits */
if (image_base + image_size >
mem_layout->free_base + mem_layout->free_size) {
WARN("Cannot load '%s' file: Not enough space.\n",
image_name);
dump_load_info(image_base, image_size, mem_layout);
goto fail;
WARN("Cannot load '%s' file: Not enough space.\n",
image_name);
dump_load_info(image_base, image_size, mem_layout);
io_result = -ENOMEM;
goto exit;
}
/* Calculate the amount of extra memory used due to alignment */
@ -448,14 +333,16 @@ unsigned long load_image(meminfo_t *mem_layout,
WARN("Cannot load '%s' file: Not enough space.\n",
image_name);
dump_load_info(image_base, image_size, mem_layout);
goto fail;
io_result = -ENOMEM;
goto exit;
}
/* Check whether the fixed load address is page-aligned. */
if (!is_page_aligned(image_base)) {
WARN("Cannot load '%s' file at unaligned address 0x%lx\n",
image_name, fixed_addr);
goto fail;
io_result = -ENOMEM;
goto exit;
}
/*
@ -505,9 +392,14 @@ unsigned long load_image(meminfo_t *mem_layout,
io_result = io_read(image_handle, image_base, image_size, &bytes_read);
if ((io_result != IO_SUCCESS) || (bytes_read < image_size)) {
WARN("Failed to load '%s' file (%i)\n", image_name, io_result);
goto fail;
goto exit;
}
image_data->image_base = image_base;
image_data->image_size = image_size;
entry_point_info->pc = image_base;
/*
* File has been successfully loaded. Update the free memory
* data structure & flush the contents of the TZRAM so that
@ -523,54 +415,12 @@ unsigned long load_image(meminfo_t *mem_layout,
mem_layout->free_base += offset + image_size;
exit:
io_result = io_close(image_handle);
io_close(image_handle);
/* Ignore improbable/unrecoverable error in 'close' */
/* TODO: Consider maintaining open device connection from this bootloader stage */
io_result = io_dev_close(dev_handle);
io_dev_close(dev_handle);
/* Ignore improbable/unrecoverable error in 'dev_close' */
return image_base;
fail: image_base = 0;
goto exit;
}
/*******************************************************************************
* Run a loaded image from the given entry point. This could result in either
* dropping into a lower exception level or jumping to a higher exception level.
* The only way of doing the latter is through an SMC. In either case, setup the
* parameters for the EL change request correctly.
******************************************************************************/
void __dead2 run_image(unsigned long entrypoint,
unsigned long spsr,
unsigned long target_security_state,
void *first_arg,
void *second_arg)
{
el_change_info_t run_image_info;
/* Tell next EL what we want done */
run_image_info.args.arg0 = RUN_IMAGE;
run_image_info.entrypoint = entrypoint;
run_image_info.spsr = spsr;
run_image_info.security_state = target_security_state;
/*
* If we are EL3 then only an eret can take us to the desired
* exception level. Else for the time being assume that we have
* to jump to a higher EL and issue an SMC. Contents of argY
* will go into the general purpose register xY e.g. arg0->x0
*/
if (IS_IN_EL3()) {
run_image_info.args.arg1 = (unsigned long) first_arg;
run_image_info.args.arg2 = (unsigned long) second_arg;
} else {
run_image_info.args.arg1 = entrypoint;
run_image_info.args.arg2 = spsr;
run_image_info.args.arg3 = (unsigned long) first_arg;
run_image_info.args.arg4 = (unsigned long) second_arg;
}
change_el(&run_image_info);
return io_result;
}

28
include/bl2/bl2.h
View File

@ -47,6 +47,32 @@ struct bl31_args;
*****************************************/
extern void bl2_platform_setup(void);
extern struct meminfo *bl2_plat_sec_mem_layout(void);
extern struct bl31_args *bl2_get_bl31_args_ptr(void);
/*******************************************************************************
* This function returns a pointer to the shared memory that the platform has
* kept aside to pass trusted firmware related information that BL3-1
* could need
******************************************************************************/
extern struct bl31_params *bl2_plat_get_bl31_params(void);
/*******************************************************************************
* This function returns a pointer to the shared memory that the platform has
* kept aside to pass platform related information that BL3-1 could need
******************************************************************************/
extern struct bl31_plat_params *bl2_plat_get_bl31_plat_params(void);
/*******************************************************************************
* This function returns a pointer to the shared memory that the platform
* has kept to point to entry point information of BL31 to BL2
******************************************************************************/
extern struct el_change_info *bl2_plat_get_bl31_ep(void);
/************************************************************************
* This function flushes to main memory all the params that are
* passed to BL3-1
**************************************************************************/
extern void bl2_plat_flush_bl31_params(void);
#endif /* __BL2_H__ */

6
include/bl31/bl31.h
View File

@ -53,9 +53,9 @@ extern void bl31_set_next_image_type(uint32_t type);
extern uint32_t bl31_get_next_image_type(void);
extern void bl31_prepare_next_image_entry();
extern struct el_change_info *bl31_get_next_image_info(uint32_t type);
extern void bl31_early_platform_setup(bl31_params_t *from_bl2,
void *plat_params_from_bl2);
extern void bl31_platform_setup(void);
extern struct meminfo *bl31_plat_get_bl32_mem_layout(void);
extern struct meminfo *bl31_plat_sec_mem_layout(void);
extern void bl31_register_bl32_init(int32_t (*)(struct meminfo *));
extern void bl31_register_bl32_init(int32_t (*)(void));
#endif /* __BL31_H__ */

35
include/common/asm_macros.S
View File

@ -88,6 +88,41 @@
\_name:
.endm
/* ---------------------------------------------
* Find the type of reset and jump to handler
* if present. If the handler is null then it is
* a cold boot. The primary cpu will set up the
* platform while the secondaries wait for
* their turn to be woken up
* ---------------------------------------------
*/
.macro wait_for_entrypoint
wait_for_entrypoint:
mrs x0, mpidr_el1
bl platform_get_entrypoint
cbnz x0, do_warm_boot
mrs x0, mpidr_el1
bl platform_is_primary_cpu
cbnz x0, do_cold_boot
/* ---------------------------------------------
* Perform any platform specific secondary cpu
* actions
* ---------------------------------------------
*/
bl plat_secondary_cold_boot_setup
b wait_for_entrypoint
do_warm_boot:
/* ---------------------------------------------
* Jump to BL31 for all warm boot init.
* ---------------------------------------------
*/
blr x0
do_cold_boot:
.endm
/*
* This macro declares an array of 1 or more stacks, properly
* aligned and in the requested section

131
include/common/bl_common.h
View File

@ -31,8 +31,9 @@
#ifndef __BL_COMMON_H__
#define __BL_COMMON_H__
#define SECURE 0
#define NON_SECURE 1
#define SECURE 0x0
#define NON_SECURE 0x1
#define PARAM_EP_SECURITY_MASK 0x1
#define UP 1
#define DOWN 0
@ -56,10 +57,34 @@
*****************************************************************************/
#define RUN_IMAGE 0xC0000000
/*******************************************************************************
* Constants that allow assembler code to access members of and the
* 'el_change_info' structure at their correct offsets.
******************************************************************************/
#define EL_CHANGE_INFO_PC_OFFSET 0x08
#define EL_CHANGE_INFO_ARGS_OFFSET 0x18
#define GET_SECURITY_STATE(x) (x & PARAM_EP_SECURITY_MASK)
#define SET_SECURITY_STATE(x, security) \
((x) = ((x) & ~PARAM_EP_SECURITY_MASK) | (security))
#define PARAM_EP 0x01
#define PARAM_IMAGE_BINARY 0x02
#define PARAM_BL31 0x03
#define VERSION_1 0x01
#define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \
(_p)->h.type = (uint8_t)(_type); \
(_p)->h.version = (uint8_t)(_ver); \
(_p)->h.size = (uint16_t)sizeof(*_p); \
(_p)->h.attr = (uint32_t)(_attr) ; \
} while (0)
#ifndef __ASSEMBLY__
#include <cdefs.h> /* For __dead2 */
#include <cassert.h>
#include <stdint.h>
/*******************************************************************************
* Structure used for telling the next BL how much of a particular type of
@ -85,40 +110,89 @@ typedef struct aapcs64_params {
unsigned long arg7;
} aapcs64_params_t;
/*******************************************************************************
* This structure represents the superset of information needed while switching
* exception levels. The only two mechanisms to do so are ERET & SMC. In case of
* SMC all members apart from 'aapcs64_params' will be ignored.
******************************************************************************/
/***************************************************************************
* This structure provides version information and the size of the
* structure, attributes for the structure it represents
***************************************************************************/
typedef struct param_header {
uint8_t type; /* type of the structure */
uint8_t version; /* version of this structure */
uint16_t size; /* size of this structure in bytes */
uint32_t attr; /* attributes: unused bits SBZ */
} param_header_t;
/*****************************************************************************
* This structure represents the superset of information needed while
* switching exception levels. The only two mechanisms to do so are
* ERET & SMC. In case of SMC all members apart from indicated
* using bit 0 of the header attributes
*****************************************************************************/
typedef struct el_change_info {
unsigned long entrypoint;
unsigned long spsr;
unsigned long security_state;
param_header_t h;
uintptr_t pc;
uint32_t spsr;
aapcs64_params_t args;
} el_change_info_t;
/*****************************************************************************
* Image info binary provides information from the image loader that
* can be used by the firmware to manage available trusted RAM.
* More advanced firmware image formats can provide additional
* information that enables optimization or greater flexibility in the
* common firmware code
*****************************************************************************/
typedef struct image_info {
param_header_t h;
uintptr_t image_base; /* physical address of base of image */
uint32_t image_size; /* bytes read from image file */
} image_info_t;
/*******************************************************************************
* This structure represents the superset of information that can be passed to
* BL31 e.g. while passing control to it from BL2. The BL32 parameters will be
* populated only if BL2 detects its presence.
* populated only if BL2 detects its presence. A pointer to a structure of this
* type should be passed in X3 to BL31's cold boot entrypoint
*
* Use of this structure and the X3 parameter is not mandatory: the BL3-1
* platform code can use other mechanisms to provide the necessary information
* about BL3-2 and BL3-3 to the common and SPD code.
*
* BL3-1 image information is mandatory if this structure is used. If either of
* the optional BL3-2 and BL3-3 image information is not provided, this is
* indicated by the respective image_info pointers being zero.
******************************************************************************/
typedef struct bl31_args {
meminfo_t bl31_meminfo;
el_change_info_t bl32_image_info;
meminfo_t bl32_meminfo;
el_change_info_t bl33_image_info;
meminfo_t bl33_meminfo;
} bl31_args_t;
typedef struct bl31_params {
param_header_t h;
image_info_t *bl31_image;
el_change_info_t *bl32_ep;
image_info_t *bl32_image;
el_change_info_t *bl33_ep;
image_info_t *bl33_image;
} bl31_params_t;
/*
* Compile time assertions related to the 'el_change_info' structure to
* ensure that the assembler and the compiler view of the offsets of
* the structure members is the same.
*/
CASSERT(EL_CHANGE_INFO_PC_OFFSET ==
__builtin_offsetof(el_change_info_t, pc), \
assert_BL31_pc_offset_mismatch);
CASSERT(EL_CHANGE_INFO_ARGS_OFFSET == \
__builtin_offsetof(el_change_info_t, args), \
assert_BL31_args_offset_mismatch);
CASSERT(sizeof(unsigned long) == __builtin_offsetof(el_change_info_t, spsr) - \
__builtin_offsetof(el_change_info_t, pc), \
assert_entrypoint_and_spsr_should_be_adjacent);
/*******************************************************************************
* Function & variable prototypes
******************************************************************************/
extern unsigned long page_align(unsigned long, unsigned);
extern void change_security_state(unsigned int);
extern void __dead2 drop_el(aapcs64_params_t *, unsigned long, unsigned long);
extern void __dead2 raise_el(aapcs64_params_t *);
extern void __dead2 change_el(el_change_info_t *);
extern unsigned long make_spsr(unsigned long, unsigned long, unsigned long);
extern void init_bl2_mem_layout(meminfo_t *,
meminfo_t *,
unsigned int,
@ -127,15 +201,12 @@ extern void init_bl31_mem_layout(const meminfo_t *,
meminfo_t *,
unsigned int) __attribute__((weak));
extern unsigned long image_size(const char *);
extern unsigned long load_image(meminfo_t *,
extern int load_image(meminfo_t *,
const char *,
unsigned int,
unsigned long);
extern void __dead2 run_image(unsigned long entrypoint,
unsigned long spsr,
unsigned long security_state,
void *first_arg,
void *second_arg);
unsigned long,
image_info_t *,
el_change_info_t *);
extern unsigned long *get_el_change_mem_ptr(void);
extern const char build_message[];

70
include/lib/aarch64/arch.h
View File

@ -175,7 +175,25 @@
#define DAIF_IRQ_BIT (1 << 1)
#define DAIF_ABT_BIT (1 << 2)
#define DAIF_DBG_BIT (1 << 3)
#define PSR_DAIF_SHIFT 0x6
#define SPSR_DAIF_SHIFT 6
#define SPSR_DAIF_MASK 0xf
#define SPSR_AIF_SHIFT 6
#define SPSR_AIF_MASK 0x7
#define SPSR_E_SHIFT 9
#define SPSR_E_MASK 0x1
#define SPSR_E_LITTLE 0x0
#define SPSR_E_BIG 0x1
#define SPSR_T_SHIFT 5
#define SPSR_T_MASK 0x1
#define SPSR_T_ARM 0x0
#define SPSR_T_THUMB 0x1
#define DISABLE_ALL_EXCEPTIONS \
(DAIF_FIQ_BIT | DAIF_IRQ_BIT | DAIF_ABT_BIT | DAIF_DBG_BIT)
/*
* TCR defintions
@ -198,29 +216,53 @@
#define TCR_SH_OUTER_SHAREABLE (0x2 << 12)
#define TCR_SH_INNER_SHAREABLE (0x3 << 12)
#define MODE_RW_64 0x0
#define MODE_RW_32 0x1
#define MODE_SP_SHIFT 0x0
#define MODE_SP_MASK 0x1
#define MODE_SP_EL0 0x0
#define MODE_SP_ELX 0x1
#define MODE_RW_SHIFT 0x4
#define MODE_RW_MASK 0x1
#define MODE_RW_64 0x0
#define MODE_RW_32 0x1
#define MODE_EL_SHIFT 0x2
#define MODE_EL_MASK 0x3
#define MODE_EL3 0x3
#define MODE_EL2 0x2
#define MODE_EL1 0x1
#define MODE_EL0 0x0
#define MODE_RW_SHIFT 0x4
#define MODE_EL_SHIFT 0x2
#define MODE_SP_SHIFT 0x0
#define MODE32_SHIFT 0
#define MODE32_MASK 0xf
#define MODE32_usr 0x0
#define MODE32_fiq 0x1
#define MODE32_irq 0x2
#define MODE32_svc 0x3
#define MODE32_mon 0x6
#define MODE32_abt 0x7
#define MODE32_hyp 0xa
#define MODE32_und 0xb
#define MODE32_sys 0xf
#define GET_RW(mode) ((mode >> MODE_RW_SHIFT) & 0x1)
#define GET_EL(mode) ((mode >> MODE_EL_SHIFT) & 0x3)
#define PSR_MODE(rw, el, sp) (rw << MODE_RW_SHIFT | el << MODE_EL_SHIFT \
| sp << MODE_SP_SHIFT)
#define GET_RW(mode) (((mode) >> MODE_RW_SHIFT) & MODE_RW_MASK)
#define GET_EL(mode) (((mode) >> MODE_EL_SHIFT) & MODE_EL_MASK)
#define GET_SP(mode) (((mode) >> MODE_SP_SHIFT) & MODE_SP_MASK)
#define GET_M32(mode) (((mode) >> MODE32_SHIFT) & MODE32_MASK)
#define SPSR32_EE_BIT (1 << 9)
#define SPSR32_T_BIT (1 << 5)
#define SPSR_64(el, sp, daif) \
(MODE_RW_64 << MODE_RW_SHIFT | \
((el) & MODE_EL_MASK) << MODE_EL_SHIFT | \
((sp) & MODE_SP_MASK) << MODE_SP_SHIFT | \
((daif) & SPSR_DAIF_MASK) << SPSR_DAIF_SHIFT)
#define SPSR_MODE32(mode, isa, endian, aif) \
(MODE_RW_32 << MODE_RW_SHIFT | \
((mode) & MODE32_MASK) << MODE32_SHIFT | \
((isa) & SPSR_T_MASK) << SPSR_T_SHIFT | \
((endian) & SPSR_E_MASK) << SPSR_E_SHIFT | \
((aif) & SPSR_AIF_MASK) << SPSR_AIF_SHIFT)
#define AARCH32_MODE_SVC 0x13
#define AARCH32_MODE_HYP 0x1a
/* Miscellaneous MMU related constants */
#define NUM_2MB_IN_GB (1 << 9)

213
plat/fvp/aarch64/bl1_plat_helpers.S
View File

@ -1,213 +0,0 @@
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <asm_macros.S>
#include <gic_v2.h>
#include <platform.h>
#include "../drivers/pwrc/fvp_pwrc.h"
.globl platform_get_entrypoint
.globl platform_cold_boot_init
.globl plat_secondary_cold_boot_setup
.macro platform_choose_gicmmap param1, param2, x_tmp, w_tmp, res
ldr \x_tmp, =VE_SYSREGS_BASE + V2M_SYS_ID
ldr \w_tmp, [\x_tmp]
ubfx \w_tmp, \w_tmp, #SYS_ID_BLD_SHIFT, #SYS_ID_BLD_LENGTH
cmp \w_tmp, #BLD_GIC_VE_MMAP
csel \res, \param1, \param2, eq
.endm
/* -----------------------------------------------------
* void plat_secondary_cold_boot_setup (void);
*
* This function performs any platform specific actions
* needed for a secondary cpu after a cold reset e.g
* mark the cpu's presence, mechanism to place it in a
* holding pen etc.
* TODO: Should we read the PSYS register to make sure
* that the request has gone through.
* -----------------------------------------------------
*/
func plat_secondary_cold_boot_setup
/* ---------------------------------------------
* Power down this cpu.
* TODO: Do we need to worry about powering the
* cluster down as well here. That will need
* locks which we won't have unless an elf-
* loader zeroes out the zi section.
* ---------------------------------------------
*/
mrs x0, mpidr_el1
ldr x1, =PWRC_BASE
str w0, [x1, #PPOFFR_OFF]
/* ---------------------------------------------
* Deactivate the gic cpu interface as well
* ---------------------------------------------
*/
ldr x0, =VE_GICC_BASE
ldr x1, =BASE_GICC_BASE
platform_choose_gicmmap x0, x1, x2, w2, x1
mov w0, #(IRQ_BYP_DIS_GRP1 | FIQ_BYP_DIS_GRP1)
orr w0, w0, #(IRQ_BYP_DIS_GRP0 | FIQ_BYP_DIS_GRP0)
str w0, [x1, #GICC_CTLR]
/* ---------------------------------------------
* There is no sane reason to come out of this
* wfi so panic if we do. This cpu will be pow-
* ered on and reset by the cpu_on pm api
* ---------------------------------------------
*/
dsb sy
wfi
cb_panic:
b cb_panic
/* -----------------------------------------------------
* void platform_get_entrypoint (unsigned int mpid);
*
* Main job of this routine is to distinguish between
* a cold and warm boot.
* On a cold boot the secondaries first wait for the
* platform to be initialized after which they are
* hotplugged in. The primary proceeds to perform the
* platform initialization.
* On a warm boot, each cpu jumps to the address in its
* mailbox.
*
* TODO: Not a good idea to save lr in a temp reg
* TODO: PSYSR is a common register and should be
* accessed using locks. Since its not possible
* to use locks immediately after a cold reset
* we are relying on the fact that after a cold
* reset all cpus will read the same WK field
* -----------------------------------------------------
*/
func platform_get_entrypoint
mov x9, x30 // lr
mov x2, x0
ldr x1, =PWRC_BASE
str w2, [x1, #PSYSR_OFF]
ldr w2, [x1, #PSYSR_OFF]
ubfx w2, w2, #PSYSR_WK_SHIFT, #PSYSR_WK_MASK
cbnz w2, warm_reset
mov x0, x2
b exit
warm_reset:
/* ---------------------------------------------
* A per-cpu mailbox is maintained in the tru-
* sted DRAM. Its flushed out of the caches
* after every update using normal memory so
* its safe to read it here with SO attributes
* ---------------------------------------------
*/
ldr x10, =TZDRAM_BASE + MBOX_OFF
bl platform_get_core_pos
lsl x0, x0, #CACHE_WRITEBACK_SHIFT
ldr x0, [x10, x0]
cbz x0, _panic
exit:
ret x9
_panic: b _panic
/* -----------------------------------------------------
* void platform_mem_init (void);
*
* Zero out the mailbox registers in the TZDRAM. The
* mmu is turned off right now and only the primary can
* ever execute this code. Secondaries will read the
* mailboxes using SO accesses. In short, BL31 will
* update the mailboxes after mapping the tzdram as
* normal memory. It will flush its copy after update.
* BL1 will always read the mailboxes with the MMU off
* -----------------------------------------------------
*/
func platform_mem_init
ldr x0, =TZDRAM_BASE + MBOX_OFF
stp xzr, xzr, [x0, #0]
stp xzr, xzr, [x0, #0x10]
stp xzr, xzr, [x0, #0x20]
stp xzr, xzr, [x0, #0x30]
ret
/* -----------------------------------------------------
* void platform_cold_boot_init (bl1_main function);
*
* Routine called only by the primary cpu after a cold
* boot to perform early platform initialization
* -----------------------------------------------------
*/
func platform_cold_boot_init
mov x20, x0
bl platform_mem_init
/* ---------------------------------------------
* Give ourselves a small coherent stack to
* ease the pain of initializing the MMU and
* CCI in assembler
* ---------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_set_coherent_stack
/* ---------------------------------------------
* Architectural init. can be generic e.g.
* enabling stack alignment and platform spec-
* ific e.g. MMU & page table setup as per the
* platform memory map. Perform the latter here
* and the former in bl1_main.
* ---------------------------------------------
*/
bl bl1_early_platform_setup
bl bl1_plat_arch_setup
/* ---------------------------------------------
* Give ourselves a stack allocated in Normal
* -IS-WBWA memory
* ---------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_set_stack
/* ---------------------------------------------
* Jump to the main function. Returning from it
* is a terminal error.
* ---------------------------------------------
*/
blr x20
cb_init_panic:
b cb_init_panic

62
plat/fvp/aarch64/plat_common.c
View File

@ -32,6 +32,7 @@
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
#include <cci400.h>
#include <debug.h>
#include <mmio.h>
#include <platform.h>
@ -130,14 +131,15 @@ const mmap_region_t fvp_mmap[] = {
* the platform memory map & initialize the mmu, for the given exception level
******************************************************************************/
#define DEFINE_CONFIGURE_MMU_EL(_el) \
void configure_mmu_el##_el(meminfo_t *mem_layout, \
void configure_mmu_el##_el(unsigned long total_base, \
unsigned long total_size, \
unsigned long ro_start, \
unsigned long ro_limit, \
unsigned long coh_start, \
unsigned long coh_limit) \
{ \
mmap_add_region(mem_layout->total_base, \
mem_layout->total_size, \
mmap_add_region(total_base, \
total_size, \
MT_MEMORY | MT_RW | MT_SECURE); \
mmap_add_region(ro_start, ro_limit - ro_start, \
MT_MEMORY | MT_RO | MT_SECURE); \
@ -251,3 +253,57 @@ uint64_t plat_get_syscnt_freq(void)
return counter_base_frequency;
}
void plat_cci_setup(void)
{
unsigned long cci_setup;
/*
* Enable CCI-400 for this cluster. No need
* for locks as no other cpu is active at the
* moment
*/
cci_setup = platform_get_cfgvar(CONFIG_HAS_CCI);
if (cci_setup)
cci_enable_coherency(read_mpidr());
}
/*******************************************************************************
* Set SPSR and secure state for BL32 image
******************************************************************************/
void fvp_set_bl32_entrypoint(el_change_info_t *bl32_ep)
{
SET_SECURITY_STATE(bl32_ep->h.attr, SECURE);
/*
* The Secure Payload Dispatcher service is responsible for
* setting the SPSR prior to entry into the BL32 image.
*/
bl32_ep->spsr = 0;
}
/*******************************************************************************
* Set SPSR and secure state for BL33 image
******************************************************************************/
void fvp_set_bl33_entrypoint(el_change_info_t *bl33_ep)
{
unsigned long el_status;
unsigned int mode;
/* Figure out what mode we enter the non-secure world in */
el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
el_status &= ID_AA64PFR0_ELX_MASK;
if (el_status)
mode = MODE_EL2;
else
mode = MODE_EL1;
/*
* TODO: Consider the possibility of specifying the SPSR in
* the FIP ToC and allowing the platform to have a say as
* well.
*/
bl33_ep->spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
SET_SECURITY_STATE(bl33_ep->h.attr, NON_SECURE);
}

129
plat/fvp/aarch64/plat_helpers.S
View File

@ -31,10 +31,139 @@
#include <arch.h>
#include <asm_macros.S>
#include <bl_common.h>
#include <gic_v2.h>
#include <platform.h>
#include "../drivers/pwrc/fvp_pwrc.h"
.globl platform_get_entrypoint
.globl plat_secondary_cold_boot_setup
.globl platform_mem_init
.globl plat_report_exception
.macro platform_choose_gicmmap param1, param2, x_tmp, w_tmp, res
ldr \x_tmp, =VE_SYSREGS_BASE + V2M_SYS_ID
ldr \w_tmp, [\x_tmp]
ubfx \w_tmp, \w_tmp, #SYS_ID_BLD_SHIFT, #SYS_ID_BLD_LENGTH
cmp \w_tmp, #BLD_GIC_VE_MMAP
csel \res, \param1, \param2, eq
.endm
/* -----------------------------------------------------
* void plat_secondary_cold_boot_setup (void);
*
* This function performs any platform specific actions
* needed for a secondary cpu after a cold reset e.g
* mark the cpu's presence, mechanism to place it in a
* holding pen etc.
* TODO: Should we read the PSYS register to make sure
* that the request has gone through.
* -----------------------------------------------------
*/
func plat_secondary_cold_boot_setup
/* ---------------------------------------------
* Power down this cpu.
* TODO: Do we need to worry about powering the
* cluster down as well here. That will need
* locks which we won't have unless an elf-
* loader zeroes out the zi section.
* ---------------------------------------------
*/
mrs x0, mpidr_el1
ldr x1, =PWRC_BASE
str w0, [x1, #PPOFFR_OFF]
/* ---------------------------------------------
* Deactivate the gic cpu interface as well
* ---------------------------------------------
*/
ldr x0, =VE_GICC_BASE
ldr x1, =BASE_GICC_BASE
platform_choose_gicmmap x0, x1, x2, w2, x1
mov w0, #(IRQ_BYP_DIS_GRP1 | FIQ_BYP_DIS_GRP1)
orr w0, w0, #(IRQ_BYP_DIS_GRP0 | FIQ_BYP_DIS_GRP0)
str w0, [x1, #GICC_CTLR]
/* ---------------------------------------------
* There is no sane reason to come out of this
* wfi so panic if we do. This cpu will be pow-
* ered on and reset by the cpu_on pm api
* ---------------------------------------------
*/
dsb sy
wfi
cb_panic:
b cb_panic
/* -----------------------------------------------------
* void platform_get_entrypoint (unsigned int mpid);
*
* Main job of this routine is to distinguish between
* a cold and warm boot.
* On a cold boot the secondaries first wait for the
* platform to be initialized after which they are
* hotplugged in. The primary proceeds to perform the
* platform initialization.
* On a warm boot, each cpu jumps to the address in its
* mailbox.
*
* TODO: Not a good idea to save lr in a temp reg
* TODO: PSYSR is a common register and should be
* accessed using locks. Since its not possible
* to use locks immediately after a cold reset
* we are relying on the fact that after a cold
* reset all cpus will read the same WK field
* -----------------------------------------------------
*/
func platform_get_entrypoint
mov x9, x30 // lr
mov x2, x0
ldr x1, =PWRC_BASE
str w2, [x1, #PSYSR_OFF]
ldr w2, [x1, #PSYSR_OFF]
ubfx w2, w2, #PSYSR_WK_SHIFT, #PSYSR_WK_MASK
cbnz w2, warm_reset
mov x0, x2
b exit
warm_reset:
/* ---------------------------------------------
* A per-cpu mailbox is maintained in the tru-
* sted DRAM. Its flushed out of the caches
* after every update using normal memory so
* its safe to read it here with SO attributes
* ---------------------------------------------
*/
ldr x10, =TZDRAM_BASE + MBOX_OFF
bl platform_get_core_pos
lsl x0, x0, #CACHE_WRITEBACK_SHIFT
ldr x0, [x10, x0]
cbz x0, _panic
exit:
ret x9
_panic: b _panic
/* -----------------------------------------------------
* void platform_mem_init (void);
*
* Zero out the mailbox registers in the TZDRAM. The
* mmu is turned off right now and only the primary can
* ever execute this code. Secondaries will read the
* mailboxes using SO accesses. In short, BL31 will
* update the mailboxes after mapping the tzdram as
* normal memory. It will flush its copy after update.
* BL1 will always read the mailboxes with the MMU off
* -----------------------------------------------------
*/
func platform_mem_init
ldr x0, =TZDRAM_BASE + MBOX_OFF
mov w1, #PLATFORM_CORE_COUNT
loop:
str xzr, [x0], #CACHE_WRITEBACK_GRANULE
subs w1, w1, #1
b.gt loop
ret
/* ---------------------------------------------
* void plat_report_exception(unsigned int type)
* Function to report an unhandled exception

28
plat/fvp/bl1_plat_setup.c
View File

@ -33,7 +33,6 @@
#include <bl_common.h>
#include <bl1.h>
#include <console.h>
#include <cci400.h>
#include <mmio.h>
#include <platform.h>
@ -126,21 +125,26 @@ void bl1_platform_setup(void)
******************************************************************************/
void bl1_plat_arch_setup(void)
{
unsigned long cci_setup;
plat_cci_setup();
/*
* Enable CCI-400 for this cluster. No need
* for locks as no other cpu is active at the
* moment
*/
cci_setup = platform_get_cfgvar(CONFIG_HAS_CCI);
if (cci_setup) {
cci_enable_coherency(read_mpidr());
}
configure_mmu_el3(&bl1_tzram_layout,
configure_mmu_el3(bl1_tzram_layout.total_base,
bl1_tzram_layout.total_size,
TZROM_BASE,
TZROM_BASE + TZROM_SIZE,
BL1_COHERENT_RAM_BASE,
BL1_COHERENT_RAM_LIMIT);
}
/*******************************************************************************
* Before calling this function BL2 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL2 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
******************************************************************************/
void bl1_plat_bl2_loaded(image_info_t *bl2_image, el_change_info_t *bl2_ep)
{
SET_SECURITY_STATE(bl2_ep->h.attr, SECURE);
bl2_ep->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
}

195
plat/fvp/bl2_plat_setup.c
View File

@ -34,6 +34,7 @@
#include <bl2.h>
#include <console.h>
#include <platform.h>
#include <string.h>
/*******************************************************************************
* Declarations of linker defined symbols which will help us find the layout
@ -73,10 +74,11 @@ __attribute__ ((aligned(PLATFORM_CACHE_LINE_SIZE),
section("tzfw_coherent_mem")));
/*******************************************************************************
* Reference to structure which holds the arguments which need to be passed
* Reference to structures which holds the arguments which need to be passed
* to BL31
******************************************************************************/
static bl31_args_t *bl2_to_bl31_args;
static bl31_params_t *bl2_to_bl31_params;
static el_change_info_t *bl31_ep_info;
meminfo_t *bl2_plat_sec_mem_layout(void)
{
@ -84,21 +86,79 @@ meminfo_t *bl2_plat_sec_mem_layout(void)
}
/*******************************************************************************
* This function returns a pointer to the memory that the platform has kept
* aside to pass all the information that BL31 could need.
* This function assigns a pointer to the memory that the platform has kept
* aside to pass platform specific and trusted firmware related information
* to BL31. This memory is allocated by allocating memory to
* bl2_to_bl31_params_mem_t structure which is a superset of all the
* structure whose information is passed to BL31
* NOTE: This function should be called only once and should be done
* before generating params to BL31
******************************************************************************/
bl31_args_t *bl2_get_bl31_args_ptr(void)
bl31_params_t *bl2_plat_get_bl31_params(void)
{
return bl2_to_bl31_args;
bl2_to_bl31_params_mem_t *bl31_params_mem;
/*
* Ensure that the secure DRAM memory used for passing BL31 arguments
* does not overlap with the BL32_BASE.
*/
assert(BL32_BASE > PARAMS_BASE + sizeof(bl2_to_bl31_params_mem_t));
/*
* Allocate the memory for all the arguments that needs to
* be passed to BL31
*/
bl31_params_mem = (bl2_to_bl31_params_mem_t *)PARAMS_BASE;
memset((void *)PARAMS_BASE, 0, sizeof(bl2_to_bl31_params_mem_t));
/* Assign memory for TF related information */
bl2_to_bl31_params = &bl31_params_mem->bl31_params;
SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
/* Fill BL31 related information */
bl31_ep_info = &bl31_params_mem->bl31_ep;
bl2_to_bl31_params->bl31_image = &bl31_params_mem->bl31_image;
SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image, PARAM_IMAGE_BINARY,
VERSION_1, 0);
/* Fill BL32 related information if it exists */
if (BL32_BASE) {
bl2_to_bl31_params->bl32_ep = &bl31_params_mem->bl32_ep;
SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep,
PARAM_EP, VERSION_1, 0);
bl2_to_bl31_params->bl32_image = &bl31_params_mem->bl32_image;
SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image,
PARAM_IMAGE_BINARY,
VERSION_1, 0);
}
/* Fill BL33 related information */
bl2_to_bl31_params->bl33_ep = &bl31_params_mem->bl33_ep;
SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep, PARAM_EP, VERSION_1, 0);
bl2_to_bl31_params->bl33_image = &bl31_params_mem->bl33_image;
SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image, PARAM_IMAGE_BINARY,
VERSION_1, 0);
return bl2_to_bl31_params;
}
/*******************************************************************************
* This function returns a pointer to the shared memory that the platform
* has kept to point to entry point information of BL31 to BL2
******************************************************************************/
struct el_change_info *bl2_plat_get_bl31_ep(void)
{
return bl31_ep_info;
}
/*******************************************************************************
* BL1 has passed the extents of the trusted SRAM that should be visible to BL2
* in x0. This memory layout is sitting at the base of the free trusted SRAM.
* Copy it to a safe loaction before its reclaimed by later BL2 functionality.
******************************************************************************/
void bl2_early_platform_setup(meminfo_t *mem_layout,
void *data)
void bl2_early_platform_setup(meminfo_t *mem_layout)
{
/* Initialize the console to provide early debug support */
console_init(PL011_UART0_BASE);
@ -119,7 +179,7 @@ void bl2_early_platform_setup(meminfo_t *mem_layout,
* Perform platform specific setup. For now just initialize the memory location
* to use for passing arguments to BL31.
******************************************************************************/
void bl2_platform_setup()
void bl2_platform_setup(void)
{
/*
* Do initial security configuration to allow DRAM/device access. On
@ -131,50 +191,99 @@ void bl2_platform_setup()
/* Initialise the IO layer and register platform IO devices */
io_setup();
/*
* Ensure that the secure DRAM memory used for passing BL31 arguments
* does not overlap with the BL32_BASE.
*/
assert (BL32_BASE > TZDRAM_BASE + sizeof(bl31_args_t));
/* Use the Trusted DRAM for passing args to BL31 */
bl2_to_bl31_args = (bl31_args_t *) TZDRAM_BASE;
/* Populate the extents of memory available for loading BL33 */
bl2_to_bl31_args->bl33_meminfo.total_base = DRAM_BASE;
bl2_to_bl31_args->bl33_meminfo.total_size = DRAM_SIZE;
bl2_to_bl31_args->bl33_meminfo.free_base = DRAM_BASE;
bl2_to_bl31_args->bl33_meminfo.free_size = DRAM_SIZE;
bl2_to_bl31_args->bl33_meminfo.attr = 0;
bl2_to_bl31_args->bl33_meminfo.next = 0;
/*
* Populate the extents of memory available for loading BL32.
* TODO: We are temporarily executing BL2 from TZDRAM; will eventually
* move to Trusted SRAM
*/
bl2_to_bl31_args->bl32_meminfo.total_base = BL32_BASE;
bl2_to_bl31_args->bl32_meminfo.free_base = BL32_BASE;
bl2_to_bl31_args->bl32_meminfo.total_size =
(TZDRAM_BASE + TZDRAM_SIZE) - BL32_BASE;
bl2_to_bl31_args->bl32_meminfo.free_size =
(TZDRAM_BASE + TZDRAM_SIZE) - BL32_BASE;
bl2_to_bl31_args->bl32_meminfo.attr = BOT_LOAD;
bl2_to_bl31_args->bl32_meminfo.next = 0;
}
/* Flush the TF params and the TF plat params */
extern void bl2_plat_flush_bl31_params(void)
{
flush_dcache_range((unsigned long)PARAMS_BASE, \
sizeof(bl2_to_bl31_params_mem_t));
}
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this is only intializes the mmu in a quick and dirty way.
******************************************************************************/
void bl2_plat_arch_setup()
{
configure_mmu_el1(&bl2_tzram_layout,
configure_mmu_el1(bl2_tzram_layout.total_base,
bl2_tzram_layout.total_size,
BL2_RO_BASE,
BL2_RO_LIMIT,
BL2_COHERENT_RAM_BASE,
BL2_COHERENT_RAM_LIMIT);
}
/*******************************************************************************
* Before calling this function BL31 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL31 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
******************************************************************************/
void bl2_plat_bl31_post_load_actions(image_info_t *bl31_image,
el_change_info_t *bl31_ep)
{
SET_SECURITY_STATE(bl31_ep->h.attr, SECURE);
bl31_ep->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
}
/*******************************************************************************
* Before calling this function BL32 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL32 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
******************************************************************************/
void bl2_plat_bl32_post_load_actions(image_info_t *bl32_image,
el_change_info_t *bl32_ep)
{
fvp_set_bl32_entrypoint(bl32_ep);
}
/*******************************************************************************
* Before calling this function BL33 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL33 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
******************************************************************************/
void bl2_plat_bl33_post_load_actions(image_info_t *image,
el_change_info_t *bl33_ep)
{
fvp_set_bl33_entrypoint(bl33_ep);
}
/*******************************************************************************
* Populate the extents of memory available for loading BL32
******************************************************************************/
extern void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
{
/*
* Populate the extents of memory available for loading BL32.
* TODO: We are temporarily executing BL2 from TZDRAM;
* will eventually move to Trusted SRAM
*/
bl32_meminfo->total_base = BL32_BASE;
bl32_meminfo->free_base = BL32_BASE;
bl32_meminfo->total_size =
(TZDRAM_BASE + TZDRAM_SIZE) - BL32_BASE;
bl32_meminfo->free_size =
(TZDRAM_BASE + TZDRAM_SIZE) - BL32_BASE;
bl32_meminfo->attr = BOT_LOAD;
bl32_meminfo->next = 0;
}
/*******************************************************************************
* Populate the extents of memory available for loading BL33
******************************************************************************/
extern void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
{
bl33_meminfo->total_base = DRAM_BASE;
bl33_meminfo->total_size = DRAM_SIZE;
bl33_meminfo->free_base = DRAM_BASE;
bl33_meminfo->free_size = DRAM_SIZE;
bl33_meminfo->attr = 0;
bl33_meminfo->attr = 0;
}

111
plat/fvp/bl31_plat_setup.c
View File

@ -29,6 +29,8 @@
*/
#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
#include <bl31.h>
#include <console.h>
@ -66,38 +68,46 @@ extern unsigned long __COHERENT_RAM_END__;
#define BL31_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
#define BL31_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
#if RESET_TO_BL31
static el_change_info_t bl32_entrypoint_info;
static el_change_info_t bl33_entrypoint_info;
#else
/*******************************************************************************
* Reference to structure which holds the arguments that have been passed to
* BL31 from BL2.
******************************************************************************/
static bl31_args_t *bl2_to_bl31_args;
static bl31_params_t *bl2_to_bl31_params;
#endif
meminfo_t *bl31_plat_sec_mem_layout(void)
{
return &bl2_to_bl31_args->bl31_meminfo;
}
meminfo_t *bl31_plat_get_bl32_mem_layout(void)
{
return &bl2_to_bl31_args->bl32_meminfo;
}
/*******************************************************************************
/*****************************************************************************
* Return a pointer to the 'el_change_info' structure of the next image for the
* security state specified. BL33 corresponds to the non-secure image type
* while BL32 corresponds to the secure image type. A NULL pointer is returned
* if the image does not exist.
******************************************************************************/
*****************************************************************************/
el_change_info_t *bl31_get_next_image_info(uint32_t type)
{
el_change_info_t *next_image_info;
#if RESET_TO_BL31
if (type == NON_SECURE)
plat_get_entry_point_info(NON_SECURE, &bl33_entrypoint_info);
else
plat_get_entry_point_info(SECURE, &bl32_entrypoint_info);
next_image_info = (type == NON_SECURE) ?
&bl2_to_bl31_args->bl33_image_info :
&bl2_to_bl31_args->bl32_image_info;
&bl33_entrypoint_info :
&bl32_entrypoint_info;
#else
next_image_info = (type == NON_SECURE) ?
bl2_to_bl31_params->bl33_ep :
bl2_to_bl31_params->bl32_ep;
#endif
/* None of the images on this platform can have 0x0 as the entrypoint */
if (next_image_info->entrypoint)
if (next_image_info->pc)
return next_image_info;
else
return NULL;
@ -114,16 +124,29 @@ el_change_info_t *bl31_get_next_image_info(uint32_t type)
* has flushed this information to memory, so we are guaranteed to pick up good
* data
******************************************************************************/
void bl31_early_platform_setup(bl31_args_t *from_bl2,
void *data)
void bl31_early_platform_setup(bl31_params_t *from_bl2,
void *plat_params_from_bl2)
{
bl2_to_bl31_args = from_bl2;
/* Initialize the console to provide early debug support */
console_init(PL011_UART0_BASE);
/* Initialize the platform config for future decision making */
platform_config_setup();
console_init(PL011_UART0_BASE);
#if RESET_TO_BL31
/*
* Do initial security configuration to allow DRAM/device access. On
* Base FVP only DRAM security is programmable (via TrustZone), but
* other platforms might have more programmable security devices
* present.
*/
plat_security_setup();
#else
assert(from_bl2->h.type == PARAM_BL31);
assert(from_bl2->h.version >= VERSION_1);
bl2_to_bl31_params = from_bl2;
#endif
}
/*******************************************************************************
@ -172,9 +195,49 @@ void bl31_platform_setup()
******************************************************************************/
void bl31_plat_arch_setup()
{
configure_mmu_el3(&bl2_to_bl31_args->bl31_meminfo,
#if RESET_TO_BL31
plat_cci_setup();
#endif
configure_mmu_el3(TZRAM_BASE,
TZRAM_SIZE,
BL31_RO_BASE,
BL31_RO_LIMIT,
BL31_COHERENT_RAM_BASE,
BL31_COHERENT_RAM_LIMIT);
}
#if RESET_TO_BL31
/*******************************************************************************
* Generate the entry point info for Non Secure and Secure images
* for transferring control from BL31
******************************************************************************/
void plat_get_entry_point_info(unsigned long target_security,
el_change_info_t *target_entry_info)
{
if (target_security == NON_SECURE) {
SET_PARAM_HEAD(target_entry_info,
PARAM_EP,
VERSION_1,
0);
/*
* Tell BL31 where the non-trusted software image
* is located and the entry state information
*/
target_entry_info->pc = plat_get_ns_image_entrypoint();
fvp_set_bl33_entrypoint(target_entry_info);
} else {
SET_PARAM_HEAD(target_entry_info,
PARAM_EP,
VERSION_1,
0);
if (BL32_BASE != 0) {
/* Hard coding entry point to the base of the BL32 */
target_entry_info->pc = BL32_BASE;
fvp_set_bl32_entrypoint(target_entry_info);
}
}
}
#endif

29
plat/fvp/bl32_plat_setup.c
View File

@ -63,38 +63,16 @@ extern unsigned long __COHERENT_RAM_END__;
#define BL32_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
#define BL32_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
/* Data structure which holds the extents of the trusted SRAM for BL32 */
static meminfo_t bl32_tzdram_layout
__attribute__ ((aligned(PLATFORM_CACHE_LINE_SIZE),
section("tzfw_coherent_mem")));
meminfo_t *bl32_plat_sec_mem_layout(void)
{
return &bl32_tzdram_layout;
}
/*******************************************************************************
* BL1 has passed the extents of the trusted SRAM that's at BL32's disposal.
* Initialize the BL32 data structure with the memory extends and initialize
* the UART
* Initialize the UART
******************************************************************************/
void bl32_early_platform_setup(meminfo_t *mem_layout,
void *data)
void bl32_early_platform_setup(void)
{
/*
* Initialize a different console than already in use to display
* messages from TSP
*/
console_init(PL011_UART1_BASE);
/* Setup the BL32 memory layout */
bl32_tzdram_layout.total_base = mem_layout->total_base;
bl32_tzdram_layout.total_size = mem_layout->total_size;
bl32_tzdram_layout.free_base = mem_layout->free_base;
bl32_tzdram_layout.free_size = mem_layout->free_size;
bl32_tzdram_layout.attr = mem_layout->attr;
bl32_tzdram_layout.next = 0;
}
/*******************************************************************************
@ -111,7 +89,8 @@ void bl32_platform_setup()
******************************************************************************/
void bl32_plat_arch_setup()
{
configure_mmu_el1(&bl32_tzdram_layout,
configure_mmu_el1(BL32_RO_BASE,
(BL32_COHERENT_RAM_LIMIT - BL32_RO_BASE),
BL32_RO_BASE,
BL32_RO_LIMIT,
BL32_COHERENT_RAM_BASE,

7
plat/fvp/plat_pm.c
View File

@ -285,7 +285,7 @@ int fvp_affinst_on_finish(unsigned long mpidr,
unsigned int state)
{
int rc = PSCI_E_SUCCESS;
unsigned long linear_id, cpu_setup, cci_setup;
unsigned long linear_id, cpu_setup;
mailbox_t *fvp_mboxes;
unsigned int gicd_base, gicc_base, reg_val, ectlr;
@ -308,10 +308,7 @@ int fvp_affinst_on_finish(unsigned long mpidr,
*/
fvp_pwrc_write_pponr(mpidr);
cci_setup = platform_get_cfgvar(CONFIG_HAS_CCI);
if (cci_setup) {
cci_enable_coherency(mpidr);
}
plat_cci_setup();
}
break;

80
plat/fvp/platform.h
View File

@ -32,6 +32,7 @@
#define __PLATFORM_H__
#include <arch.h>
#include <bl_common.h>
/*******************************************************************************
@ -134,6 +135,10 @@
#define TZDRAM_SIZE 0x02000000
#define MBOX_OFF 0x1000
/* Base address where parameters to BL31 are stored */
#define PARAMS_BASE TZDRAM_BASE
#define DRAM_BASE 0x80000000ull
#define DRAM_SIZE 0x80000000ull
@ -339,6 +344,7 @@
#ifndef __ASSEMBLY__
#include <stdint.h>
#include <bl_common.h>
typedef volatile struct mailbox {
@ -346,6 +352,22 @@ typedef volatile struct mailbox {
__attribute__((__aligned__(CACHE_WRITEBACK_GRANULE)));
} mailbox_t;
/*******************************************************************************
* This structure represents the superset of information that is passed to
* BL31 e.g. while passing control to it from BL2 which is bl31_params
* and bl31_plat_params and its elements
******************************************************************************/
typedef struct bl2_to_bl31_params_mem {
bl31_params_t bl31_params;
image_info_t bl31_image;
image_info_t bl32_image;
image_info_t bl33_image;
el_change_info_t bl33_ep;
el_change_info_t bl32_ep;
el_change_info_t bl31_ep;
} bl2_to_bl31_params_mem_t;
/*******************************************************************************
* Forward declarations
******************************************************************************/
@ -375,12 +397,14 @@ extern int platform_setup_pm(const struct plat_pm_ops **);
extern unsigned int platform_get_core_pos(unsigned long mpidr);
extern void enable_mmu_el1(void);
extern void enable_mmu_el3(void);
extern void configure_mmu_el1(struct meminfo *mem_layout,
extern void configure_mmu_el1(unsigned long total_base,
unsigned long total_size,
unsigned long ro_start,
unsigned long ro_limit,
unsigned long coh_start,
unsigned long coh_limit);
extern void configure_mmu_el3(struct meminfo *mem_layout,
extern void configure_mmu_el3(unsigned long total_base,
unsigned long total_size,
unsigned long ro_start,
unsigned long ro_limit,
unsigned long coh_start,
@ -391,6 +415,11 @@ extern void plat_report_exception(unsigned long);
extern unsigned long plat_get_ns_image_entrypoint(void);
extern unsigned long platform_get_stack(unsigned long mpidr);
extern uint64_t plat_get_syscnt_freq(void);
#if RESET_TO_BL31
extern void plat_get_entry_point_info(unsigned long target_security,
el_change_info_t *target_entry_info);
#endif
extern void plat_cci_setup(void);
/* Declarations for fvp_gic.c */
extern void gic_cpuif_deactivate(unsigned int);
@ -412,6 +441,53 @@ extern int plat_get_image_source(const char *image_name,
/* Declarations for plat_security.c */
extern void plat_security_setup(void);
/*
* Before calling this function BL2 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL2 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
*/
extern void bl1_plat_bl2_loaded(image_info_t *image, el_change_info_t *ep);
/*
* Before calling this function BL31 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL31 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
*/
extern void bl2_plat_bl31_post_load_actions(image_info_t *image,
el_change_info_t *ep);
/*
* Before calling this function BL32 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL32 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
*/
extern void bl2_plat_bl32_post_load_actions(image_info_t *image,
el_change_info_t *ep);
/*
* Before calling this function BL33 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL33 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
*/
extern void bl2_plat_bl33_post_load_actions(image_info_t *image,
el_change_info_t *ep);
/* Gets the memory layout for BL32 */
extern void bl2_plat_get_bl32_meminfo(meminfo_t *mem_info);
/* Gets the memory layout for BL33 */
extern void bl2_plat_get_bl33_meminfo(meminfo_t *mem_info);
/* Sets the entrypoint for BL32 */
extern void fvp_set_bl32_entrypoint(el_change_info_t *bl32_ep);
/* Sets the entrypoint for BL33 */
extern void fvp_set_bl33_entrypoint(el_change_info_t *bl33_ep);
#endif /*__ASSEMBLY__*/

6
plat/fvp/platform.mk
View File

@ -45,7 +45,6 @@ PLAT_BL_COMMON_SOURCES := drivers/arm/pl011/pl011.c \
BL1_SOURCES += drivers/arm/cci400/cci400.c \
plat/common/aarch64/platform_up_stack.S \
plat/fvp/bl1_plat_setup.c \
plat/fvp/aarch64/bl1_plat_helpers.S \
plat/fvp/aarch64/plat_common.c \
plat/fvp/aarch64/plat_helpers.S
@ -67,3 +66,8 @@ BL31_SOURCES += drivers/arm/gic/gic_v2.c \
plat/fvp/aarch64/plat_helpers.S \
plat/fvp/aarch64/plat_common.c \
plat/fvp/drivers/pwrc/fvp_pwrc.c
ifeq (${RESET_TO_BL31}, 1)
BL31_SOURCES += drivers/arm/tzc400/tzc400.c \
plat/fvp/plat_security.c
endif

2
services/spd/tspd/tspd_common.c
View File

@ -91,7 +91,7 @@ int32_t tspd_init_secure_context(uint64_t entrypoint,
tsp_ctx->mpidr = mpidr;
cm_set_context(mpidr, &tsp_ctx->cpu_ctx, SECURE);
spsr = make_spsr(MODE_EL1, MODE_SP_ELX, rw);
spsr = SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
cm_set_el3_eret_context(SECURE, entrypoint, spsr, scr);
return 0;

23
services/spd/tspd/tspd_main.c
View File

@ -66,7 +66,7 @@ DEFINE_SVC_UUID(tsp_uuid,
0x5b3056a0, 0x3291, 0x427b, 0x98, 0x11,
0x71, 0x68, 0xca, 0x50, 0xf3, 0xfa);
int32_t tspd_init(meminfo_t *bl32_meminfo);
int32_t tspd_init(void);
/*******************************************************************************
@ -96,7 +96,7 @@ int32_t tspd_setup(void)
* signalling failure initializing the service. We bail out without
* registering any handlers
*/
if (!image_info->entrypoint)
if (!image_info->pc)
return 1;
/*
@ -104,7 +104,7 @@ int32_t tspd_setup(void)
* state i.e whether AArch32 or AArch64. Assuming it's AArch64
* for the time being.
*/
rc = tspd_init_secure_context(image_info->entrypoint,
rc = tspd_init_secure_context(image_info->pc,
TSP_AARCH64,
mpidr,
&tspd_sp_context[linear_id]);
@ -126,28 +126,15 @@ int32_t tspd_setup(void)
* It also assumes that a valid non-secure context has been initialised by PSCI
* so it does not need to save and restore any non-secure state. This function
* performs a synchronous entry into the Secure payload. The SP passes control
* back to this routine through a SMC. It also passes the extents of memory made
* available to BL32 by BL31.
* back to this routine through a SMC.
******************************************************************************/
int32_t tspd_init(meminfo_t *bl32_meminfo)
int32_t tspd_init(void)
{
uint64_t mpidr = read_mpidr();
uint32_t linear_id = platform_get_core_pos(mpidr);
uint64_t rc;
tsp_context_t *tsp_ctx = &tspd_sp_context[linear_id];
/*
* Arrange for passing a pointer to the meminfo structure
* describing the memory extents available to the secure
* payload.
* TODO: We are passing a pointer to BL31 internal memory
* whereas this structure should be copied to a communication
* buffer between the SP and SPD.
*/
write_ctx_reg(get_gpregs_ctx(&tsp_ctx->cpu_ctx),
CTX_GPREG_X0,
(uint64_t) bl32_meminfo);
/*
* Arrange for an entry into the test secure payload. We expect an array
* of vectors in return

21
services/std_svc/psci/psci_common.c
View File

@ -303,6 +303,7 @@ int psci_set_ns_entry_info(unsigned int index,
unsigned int rw, mode, ee, spsr = 0;
unsigned long id_aa64pfr0 = read_id_aa64pfr0_el1(), scr = read_scr();
unsigned long el_status;
unsigned long daif;
/* Figure out what mode do we enter the non-secure world in */
el_status = (id_aa64pfr0 >> ID_AA64PFR0_EL2_SHIFT) &
@ -330,24 +331,18 @@ int psci_set_ns_entry_info(unsigned int index,
ee = read_sctlr_el1() & SCTLR_EE_BIT;
}
spsr = DAIF_DBG_BIT | DAIF_ABT_BIT;
spsr |= DAIF_IRQ_BIT | DAIF_FIQ_BIT;
spsr <<= PSR_DAIF_SHIFT;
spsr |= make_spsr(mode, MODE_SP_ELX, !rw);
spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
psci_ns_entry_info[index].sctlr |= ee;
psci_ns_entry_info[index].scr |= SCR_RW_BIT;
} else {
/* Check whether aarch32 has to be entered in Thumb mode */
if (entrypoint & 0x1)
spsr = SPSR32_T_BIT;
if (el_status && (scr & SCR_HCE_BIT)) {
mode = AARCH32_MODE_HYP;
mode = MODE32_hyp;
ee = read_sctlr_el2() & SCTLR_EE_BIT;
} else {
mode = AARCH32_MODE_SVC;
mode = MODE32_svc;
ee = read_sctlr_el1() & SCTLR_EE_BIT;
}
@ -355,11 +350,9 @@ int psci_set_ns_entry_info(unsigned int index,
* TODO: Choose async. exception bits if HYP mode is not
* implemented according to the values of SCR.{AW, FW} bits
*/
spsr |= DAIF_ABT_BIT | DAIF_IRQ_BIT | DAIF_FIQ_BIT;
spsr <<= PSR_DAIF_SHIFT;
if (ee)
spsr |= SPSR32_EE_BIT;
spsr |= mode;
daif = DAIF_ABT_BIT | DAIF_IRQ_BIT | DAIF_FIQ_BIT;
spsr = SPSR_MODE32(mode, entrypoint & 0x1, ee, daif);
/* Ensure that the CSPR.E and SCTLR.EE bits match */
psci_ns_entry_info[index].sctlr |= ee;