Simplify Firmware Design document
The Firmware Design document is meant to provide a general overview of the Trusted Firmware code. Although it is useful to provide some guidance around the responsibilities of the platform layer, it should not provide too much platform specific implementation details. Right now, some sections are too tied to the implementation on ARM platforms. This makes the Firmware Design document harder to digest. This patch simplifies this aspect of the Firmware Design document. The sections relating the platform initialisations performed by the different BL stages have been simplified and the extra details about the ARM platforms implementation have been moved to the Porting Guide when appropriate. This patch also provides various documentation fixes and additions in the Firmware Design and Platform Porting Guide. In particular: - Update list of SMCs supported by BL1. - Remove MMU setup from architectural inits, as it is actually performed by platform code. - Similarly, move runtime services initialisation, BL2 image initialization and BL33 execution out of the platform initialisation paragraph. - List SError interrupt unmasking as part of BL1 architectural initialization. - Mention Trusted Watchdog enabling in BL1 on ARM platforms. - Fix order of steps in "BL2 image load and execution" section. - Refresh section about GICv3/GICv2 drivers initialisation on ARM platforms. Change-Id: I32113c4ffdc26687042629cd8bbdbb34d91e3c14
This commit is contained in:
Sandrine Bailleux
parent
55a85659c0
commit
eaefdecdf1
|
|
@ -152,11 +152,15 @@ BL1 performs minimal architectural initialization as follows.
|
|||
CLCD window of the FVP.
|
||||
|
||||
BL1 does not expect to receive any exceptions other than the SMC exception.
|
||||
For the latter, BL1 installs a simple stub. The stub expects to receive
|
||||
only a single type of SMC (determined by its function ID in the general
|
||||
purpose register `X0`). This SMC is raised by BL2 to make BL1 pass control
|
||||
to BL31 (loaded by BL2) at EL3. Any other SMC leads to an assertion
|
||||
failure.
|
||||
For the latter, BL1 installs a simple stub. The stub expects to receive a
|
||||
limited set of SMC types (determined by their function IDs in the general
|
||||
purpose register `X0`):
|
||||
- `BL1_SMC_RUN_IMAGE`: This SMC is raised by BL2 to make BL1 pass control
|
||||
to BL31 (loaded by BL2) at EL3.
|
||||
- All SMCs listed in section "BL1 SMC Interface" in the [Firmware Update]
|
||||
Design Guide.
|
||||
|
||||
Any other SMC leads to an assertion failure.
|
||||
|
||||
* CPU initialization
|
||||
|
||||
|
|
@ -164,12 +168,6 @@ BL1 performs minimal architectural initialization as follows.
|
|||
specific reset handler function (see the section: "CPU specific operations
|
||||
framework").
|
||||
|
||||
* MMU setup
|
||||
|
||||
BL1 sets up EL3 memory translation by creating page tables to cover the
|
||||
first 4GB of physical address space. This covers all the memories and
|
||||
peripherals needed by BL1.
|
||||
|
||||
* Control register setup
|
||||
- `SCTLR_EL3`. Instruction cache is enabled by setting the `SCTLR_EL3.I`
|
||||
bit. Alignment and stack alignment checking is enabled by setting the
|
||||
|
|
@ -187,12 +185,19 @@ BL1 performs minimal architectural initialization as follows.
|
|||
and Advanced SIMD execution are configured to not trap to EL3 by
|
||||
clearing the `CPTR_EL3.TFP` bit.
|
||||
|
||||
- `DAIF`. The SError interrupt is enabled by clearing the SError interrupt
|
||||
mask bit.
|
||||
|
||||
#### Platform initialization
|
||||
|
||||
BL1 enables issuing of snoop and DVM (Distributed Virtual Memory) requests to
|
||||
the CCI slave interface corresponding to the cluster that includes the
|
||||
primary CPU. BL1 also initializes a UART (PL011 console), which enables access
|
||||
to the `printf` family of functions in BL1.
|
||||
On ARM platforms, BL1 performs the following platform initializations:
|
||||
|
||||
* Enable the Trusted Watchdog.
|
||||
* Initialize the console.
|
||||
* Configure the Interconnect to enable hardware coherency.
|
||||
* Enable the MMU and map the memory it needs to access.
|
||||
* Configure any required platform storage to load the next bootloader image
|
||||
(BL2).
|
||||
|
||||
#### Firmware Update detection and execution
|
||||
|
||||
|
|
@ -210,7 +215,12 @@ uses to initialize the execution state of the next image.
|
|||
|
||||
In the normal boot flow, BL1 execution continues as follows:
|
||||
|
||||
1. BL1 determines the amount of free trusted SRAM memory available by
|
||||
1. BL1 prints the following string from the primary CPU to indicate successful
|
||||
execution of the BL1 stage:
|
||||
|
||||
"Booting Trusted Firmware"
|
||||
|
||||
2. BL1 determines the amount of free trusted SRAM memory available by
|
||||
calculating the extent of its own data section, which also resides in
|
||||
trusted SRAM. BL1 loads a BL2 raw binary image from platform storage, at a
|
||||
platform-specific base address. If the BL2 image file is not present or if
|
||||
|
|
@ -225,11 +235,6 @@ In the normal boot flow, BL1 execution continues as follows:
|
|||
provided as a base address in the platform header. Further description of
|
||||
the memory layout can be found later in this document.
|
||||
|
||||
2. BL1 prints the following string from the primary CPU to indicate successful
|
||||
execution of the BL1 stage:
|
||||
|
||||
"Booting Trusted Firmware"
|
||||
|
||||
3. BL1 passes control to the BL2 image at Secure EL1, starting from its load
|
||||
address.
|
||||
|
||||
|
|
@ -247,23 +252,23 @@ in this document). The functionality implemented by BL2 is as follows.
|
|||
#### Architectural initialization
|
||||
|
||||
BL2 performs minimal architectural initialization required for subsequent
|
||||
stages of the ARM Trusted Firmware and normal world software. It sets up
|
||||
Secure EL1 memory translation by creating page tables to address the first 4GB
|
||||
of the physical address space in a similar way to BL1. EL1 and EL0 are given
|
||||
access to Floating Point & Advanced SIMD registers by clearing the `CPACR.FPEN`
|
||||
bits.
|
||||
stages of the ARM Trusted Firmware and normal world software. EL1 and EL0 are
|
||||
given access to Floating Point & Advanced SIMD registers by clearing the
|
||||
`CPACR.FPEN` bits.
|
||||
|
||||
#### Platform initialization
|
||||
|
||||
BL2 copies the information regarding the trusted SRAM populated by BL1 using a
|
||||
platform-specific mechanism. It calculates the limits of DRAM (main memory)
|
||||
to determine whether there is enough space to load the BL33 image. A platform
|
||||
defined base address is used to specify the load address for the BL31 image.
|
||||
It also defines the extents of memory available for use by the BL32 image.
|
||||
BL2 also initializes a UART (PL011 console), which enables access to the
|
||||
`printf` family of functions in BL2. Platform security is initialized to allow
|
||||
access to controlled components. The storage abstraction layer is initialized
|
||||
which is used to load further bootloader images.
|
||||
On ARM platforms, BL2 performs the following platform initializations:
|
||||
|
||||
* Initialize the console.
|
||||
* Configure any required platform storage to allow loading further bootloader
|
||||
images.
|
||||
* Enable the MMU and map the memory it needs to access.
|
||||
* Perform platform security setup to allow access to controlled components.
|
||||
* Reserve some memory for passing information to the next bootloader image
|
||||
(BL31) and populate it.
|
||||
* Define the extents of memory available for loading each subsequent
|
||||
bootloader image.
|
||||
|
||||
#### SCP_BL2 (System Control Processor Firmware) image load
|
||||
|
||||
|
|
@ -334,89 +339,75 @@ in this document). The functionality implemented by BL31 is as follows.
|
|||
Currently, BL31 performs a similar architectural initialization to BL1 as
|
||||
far as system register settings are concerned. Since BL1 code resides in ROM,
|
||||
architectural initialization in BL31 allows override of any previous
|
||||
initialization done by BL1. BL31 creates page tables to address the first
|
||||
4GB of physical address space and initializes the MMU accordingly. It initializes
|
||||
a buffer of frequently used pointers, called per-CPU pointer cache, in memory for
|
||||
faster access. Currently the per-CPU pointer cache contains only the pointer
|
||||
to crash stack. It then replaces the exception vectors populated by BL1 with its
|
||||
own. BL31 exception vectors implement more elaborate support for
|
||||
handling SMCs since this is the only mechanism to access the runtime services
|
||||
implemented by BL31 (PSCI for example). BL31 checks each SMC for validity as
|
||||
specified by the [SMC calling convention PDD][SMCCC] before passing control to
|
||||
the required SMC handler routine. BL31 programs the `CNTFRQ_EL0` register with
|
||||
the clock frequency of the system counter, which is provided by the platform.
|
||||
initialization done by BL1.
|
||||
|
||||
BL31 initializes the per-CPU data framework, which provides a cache of
|
||||
frequently accessed per-CPU data optimised for fast, concurrent manipulation
|
||||
on different CPUs. This buffer includes pointers to per-CPU contexts, crash
|
||||
buffer, CPU reset and power down operations, PSCI data, platform data and so on.
|
||||
|
||||
It then replaces the exception vectors populated by BL1 with its own. BL31
|
||||
exception vectors implement more elaborate support for handling SMCs since this
|
||||
is the only mechanism to access the runtime services implemented by BL31 (PSCI
|
||||
for example). BL31 checks each SMC for validity as specified by the
|
||||
[SMC calling convention PDD][SMCCC] before passing control to the required SMC
|
||||
handler routine.
|
||||
|
||||
BL31 programs the `CNTFRQ_EL0` register with the clock frequency of the system
|
||||
counter, which is provided by the platform.
|
||||
|
||||
#### Platform initialization
|
||||
|
||||
BL31 performs detailed platform initialization, which enables normal world
|
||||
software to function correctly. It also retrieves entrypoint information for
|
||||
the BL33 image loaded by BL2 from the platform defined memory address populated
|
||||
by BL2. It enables issuing of snoop and DVM (Distributed Virtual Memory)
|
||||
requests to the CCI slave interface corresponding to the cluster that includes
|
||||
the primary CPU. BL31 also initializes a UART (PL011 console), which enables
|
||||
access to the `printf` family of functions in BL31. It enables the system
|
||||
level implementation of the generic timer through the memory mapped interface.
|
||||
software to function correctly.
|
||||
|
||||
* GICv2 initialization:
|
||||
On ARM platforms, this consists of the following:
|
||||
|
||||
- Enable group0 interrupts in the GIC CPU interface.
|
||||
- Configure group0 interrupts to be asserted as FIQs.
|
||||
- Disable the legacy interrupt bypass mechanism.
|
||||
- Configure the priority mask register to allow interrupts of all
|
||||
priorities to be signaled to the CPU interface.
|
||||
- Mark SGIs 8-15 and the other secure interrupts on the platform
|
||||
as group0 (secure).
|
||||
- Target all secure SPIs to CPU0.
|
||||
- Enable these group0 interrupts in the GIC distributor.
|
||||
- Configure all other interrupts as group1 (non-secure).
|
||||
- Enable signaling of group0 interrupts in the GIC distributor.
|
||||
* Initialize the console.
|
||||
* Configure the Interconnect to enable hardware coherency.
|
||||
* Enable the MMU and map the memory it needs to access.
|
||||
* Initialize the generic interrupt controller.
|
||||
* Initialize the power controller device.
|
||||
* Detect the system topology.
|
||||
|
||||
* GICv3 initialization:
|
||||
#### Runtime services initialization
|
||||
|
||||
If a GICv3 implementation is available in the platform, BL31 initializes
|
||||
the GICv3 in GICv2 emulation mode with settings as described for GICv2
|
||||
above.
|
||||
BL31 is responsible for initializing the runtime services. One of them is PSCI.
|
||||
|
||||
* Power management initialization:
|
||||
As part of the PSCI initializations, BL31 detects the system topology. It also
|
||||
initializes the data structures that implement the state machine used to track
|
||||
the state of power domain nodes. The state can be one of `OFF`, `RUN` or
|
||||
`RETENTION`. All secondary CPUs are initially in the `OFF` state. The cluster
|
||||
that the primary CPU belongs to is `ON`; any other cluster is `OFF`. It also
|
||||
initializes the locks that protect them. BL31 accesses the state of a CPU or
|
||||
cluster immediately after reset and before the data cache is enabled in the
|
||||
warm boot path. It is not currently possible to use 'exclusive' based spinlocks,
|
||||
therefore BL31 uses locks based on Lamport's Bakery algorithm instead.
|
||||
|
||||
BL31 implements a state machine to track CPU and cluster state. The state
|
||||
can be one of `OFF`, `ON_PENDING`, `SUSPEND` or `ON`. All secondary CPUs are
|
||||
initially in the `OFF` state. The cluster that the primary CPU belongs to is
|
||||
`ON`; any other cluster is `OFF`. BL31 initializes the data structures that
|
||||
implement the state machine, including the locks that protect them. BL31
|
||||
accesses the state of a CPU or cluster immediately after reset and before
|
||||
the data cache is enabled in the warm boot path. It is not currently
|
||||
possible to use 'exclusive' based spinlocks, therefore BL31 uses locks
|
||||
based on Lamport's Bakery algorithm instead. BL31 allocates these locks in
|
||||
device memory by default.
|
||||
The runtime service framework and its initialization is described in more
|
||||
detail in the "EL3 runtime services framework" section below.
|
||||
|
||||
* Runtime services initialization:
|
||||
Details about the status of the PSCI implementation are provided in the
|
||||
"Power State Coordination Interface" section below.
|
||||
|
||||
The runtime service framework and its initialization is described in the
|
||||
"EL3 runtime services framework" section below.
|
||||
#### BL32 (Secure-EL1 Payload) image initialization
|
||||
|
||||
Details about the PSCI service are provided in the "Power State Coordination
|
||||
Interface" section below.
|
||||
If a BL32 image is present then there must be a matching Secure-EL1 Payload
|
||||
Dispatcher (SPD) service (see later for details). During initialization
|
||||
that service must register a function to carry out initialization of BL32
|
||||
once the runtime services are fully initialized. BL31 invokes such a
|
||||
registered function to initialize BL32 before running BL33.
|
||||
|
||||
* BL32 (Secure-EL1 Payload) image initialization
|
||||
Details on BL32 initialization and the SPD's role are described in the
|
||||
"Secure-EL1 Payloads and Dispatchers" section below.
|
||||
|
||||
If a BL32 image is present then there must be a matching Secure-EL1 Payload
|
||||
Dispatcher (SPD) service (see later for details). During initialization
|
||||
that service must register a function to carry out initialization of BL32
|
||||
once the runtime services are fully initialized. BL31 invokes such a
|
||||
registered function to initialize BL32 before running BL33.
|
||||
|
||||
Details on BL32 initialization and the SPD's role are described in the
|
||||
"Secure-EL1 Payloads and Dispatchers" section below.
|
||||
|
||||
* BL33 (Non-trusted Firmware) execution
|
||||
|
||||
BL31 initializes the EL2 or EL1 processor context for normal-world cold
|
||||
boot, ensuring that no secure state information finds its way into the
|
||||
non-secure execution state. BL31 uses the entrypoint information provided
|
||||
by BL2 to jump to the Non-trusted firmware image (BL33) at the highest
|
||||
available Exception Level (EL2 if available, otherwise EL1).
|
||||
#### BL33 (Non-trusted Firmware) execution
|
||||
|
||||
BL31 initializes the EL2 or EL1 processor context for normal-world cold
|
||||
boot, ensuring that no secure state information finds its way into the
|
||||
non-secure execution state. BL31 uses the entrypoint information provided
|
||||
by BL2 to jump to the Non-trusted firmware image (BL33) at the highest
|
||||
available Exception Level (EL2 if available, otherwise EL1).
|
||||
|
||||
### Using alternative Trusted Boot Firmware in place of BL1 and BL2
|
||||
|
||||
|
|
@ -558,9 +549,6 @@ not all been instantiated in the current implementation.
|
|||
Coordination Interface ([PSCI]) is the first set of standard service calls
|
||||
defined by ARM (see PSCI section later).
|
||||
|
||||
NOTE: Currently this service is called PSCI since there are no other
|
||||
defined standard service calls.
|
||||
|
||||
2. Secure-EL1 Payload Dispatcher service
|
||||
|
||||
If a system runs a Trusted OS or other Secure-EL1 Payload (SP) then
|
||||
|
|
@ -1833,7 +1821,7 @@ kernel at boot time. These can be found in the `fdts` directory.
|
|||
|
||||
- - - - - - - - - - - - - - - - - - - - - - - - - -
|
||||
|
||||
_Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved._
|
||||
_Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved._
|
||||
|
||||
[ARM ARM]: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0487a.e/index.html "ARMv8-A Reference Manual (ARM DDI0487A.E)"
|
||||
[PSCI]: http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf "Power State Coordination Interface PDD (ARM DEN 0022C)"
|
||||
|
|
|
|||
|
|
@ -854,8 +854,16 @@ BL1 to perform the above tasks.
|
|||
This function executes with the MMU and data caches disabled. It is only called
|
||||
by the primary CPU.
|
||||
|
||||
In ARM standard platforms, this function initializes the console and enables
|
||||
snoop requests into the primary CPU's cluster.
|
||||
On ARM standard platforms, this function:
|
||||
|
||||
* Enables a secure instance of SP805 to act as the Trusted Watchdog.
|
||||
|
||||
* Initializes a UART (PL011 console), which enables access to the `printf`
|
||||
family of functions in BL1.
|
||||
|
||||
* Enables issuing of snoop and DVM (Distributed Virtual Memory) requests to
|
||||
the CCI slave interface corresponding to the cluster that includes the
|
||||
primary CPU.
|
||||
|
||||
### Function : bl1_plat_arch_setup() [mandatory]
|
||||
|
||||
|
|
@ -1061,15 +1069,19 @@ This function executes with the MMU and data caches disabled. It is only called
|
|||
by the primary CPU. The arguments to this function is the address of the
|
||||
`meminfo` structure populated by BL1.
|
||||
|
||||
The platform must copy the contents of the `meminfo` structure into a private
|
||||
The platform may copy the contents of the `meminfo` structure into a private
|
||||
variable as the original memory may be subsequently overwritten by BL2. The
|
||||
copied structure is made available to all BL2 code through the
|
||||
`bl2_plat_sec_mem_layout()` function.
|
||||
|
||||
In ARM standard platforms, this function also initializes the storage
|
||||
abstraction layer used to load further bootloader images. It is necessary to do
|
||||
this early on platforms with a SCP_BL2 image, since the later
|
||||
`bl2_platform_setup` must be done after SCP_BL2 is loaded.
|
||||
On ARM standard platforms, this function also:
|
||||
|
||||
* Initializes a UART (PL011 console), which enables access to the `printf`
|
||||
family of functions in BL2.
|
||||
|
||||
* Initializes the storage abstraction layer used to load further bootloader
|
||||
images. It is necessary to do this early on platforms with a SCP_BL2 image,
|
||||
since the later `bl2_platform_setup` must be done after SCP_BL2 is loaded.
|
||||
|
||||
|
||||
### Function : bl2_plat_arch_setup() [mandatory]
|
||||
|
|
@ -1081,9 +1093,9 @@ This function executes with the MMU and data caches disabled. It is only called
|
|||
by the primary CPU.
|
||||
|
||||
The purpose of this function is to perform any architectural initialization
|
||||
that varies across platforms, for example enabling the MMU (since the memory
|
||||
map differs across platforms).
|
||||
that varies across platforms.
|
||||
|
||||
On ARM standard platforms, this function enables the MMU.
|
||||
|
||||
### Function : bl2_platform_setup() [mandatory]
|
||||
|
||||
|
|
@ -1284,7 +1296,7 @@ This function executes with the MMU and data caches disabled. It is only
|
|||
called by the primary CPU. The arguments to this function is the address
|
||||
of the `meminfo` structure and platform specific info provided by BL1.
|
||||
|
||||
The platform must copy the contents of the `mem_info` and `plat_info` into
|
||||
The platform may copy the contents of the `mem_info` and `plat_info` into
|
||||
private storage as the original memory may be subsequently overwritten by BL2U.
|
||||
|
||||
On ARM CSS platforms `plat_info` is interpreted as an `image_info_t` structure,
|
||||
|
|
@ -1386,7 +1398,14 @@ to the platform data also needs to be saved.
|
|||
|
||||
In ARM standard platforms, BL2 passes a pointer to a `bl31_params` structure
|
||||
in BL2 memory. BL31 copies the information in this pointer to internal data
|
||||
structures.
|
||||
structures. It also performs the following:
|
||||
|
||||
* Initialize a UART (PL011 console), which enables access to the `printf`
|
||||
family of functions in BL31.
|
||||
|
||||
* Enable issuing of snoop and DVM (Distributed Virtual Memory) requests to the
|
||||
CCI slave interface corresponding to the cluster that includes the primary
|
||||
CPU.
|
||||
|
||||
|
||||
### Function : bl31_plat_arch_setup() [mandatory]
|
||||
|
|
@ -1398,8 +1417,9 @@ This function executes with the MMU and data caches disabled. It is only called
|
|||
by the primary CPU.
|
||||
|
||||
The purpose of this function is to perform any architectural initialization
|
||||
that varies across platforms, for example enabling the MMU (since the memory
|
||||
map differs across platforms).
|
||||
that varies across platforms.
|
||||
|
||||
On ARM standard platforms, this function enables the MMU.
|
||||
|
||||
|
||||
### Function : bl31_platform_setup() [mandatory]
|
||||
|
|
@ -1414,12 +1434,32 @@ called by the primary CPU.
|
|||
The purpose of this function is to complete platform initialization so that both
|
||||
BL31 runtime services and normal world software can function correctly.
|
||||
|
||||
In ARM standard platforms, this function does the following:
|
||||
* Initializes the generic interrupt controller.
|
||||
* Enables system-level implementation of the generic timer counter.
|
||||
* Grants access to the system counter timer module
|
||||
* Initializes the power controller device
|
||||
* Detects the system topology.
|
||||
On ARM standard platforms, this function does the following:
|
||||
|
||||
* Initialize the generic interrupt controller.
|
||||
|
||||
Depending on the GIC driver selected by the platform, the appropriate GICv2
|
||||
or GICv3 initialization will be done, which mainly consists of:
|
||||
|
||||
- Enable secure interrupts in the GIC CPU interface.
|
||||
- Disable the legacy interrupt bypass mechanism.
|
||||
- Configure the priority mask register to allow interrupts of all priorities
|
||||
to be signaled to the CPU interface.
|
||||
- Mark SGIs 8-15 and the other secure interrupts on the platform as secure.
|
||||
- Target all secure SPIs to CPU0.
|
||||
- Enable these secure interrupts in the GIC distributor.
|
||||
- Configure all other interrupts as non-secure.
|
||||
- Enable signaling of secure interrupts in the GIC distributor.
|
||||
|
||||
* Enable system-level implementation of the generic timer counter through the
|
||||
memory mapped interface.
|
||||
|
||||
* Grant access to the system counter timer module
|
||||
|
||||
* Initialize the power controller device.
|
||||
|
||||
In particular, initialise the locks that prevent concurrent accesses to the
|
||||
power controller device.
|
||||
|
||||
|
||||
### Function : bl31_plat_runtime_setup() [optional]
|
||||
|
|
@ -2020,7 +2060,7 @@ amount of open resources per driver.
|
|||
|
||||
- - - - - - - - - - - - - - - - - - - - - - - - - -
|
||||
|
||||
_Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved._
|
||||
_Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved._
|
||||
|
||||
|
||||
[ARM GIC Architecture Specification 2.0]: http://infocenter.arm.com/help/topic/com.arm.doc.ihi0048b/index.html
|
||||
|
|
|
|||
Loading…
Reference in New Issue