plat/arm: Use common build flag for using generic sp804 driver

SP804 TIMER is not platform specific, and current code base adds
multiple defines to use this driver. Like FVP_USE_SP804_TIMER and
FVP_VE_USE_SP804_TIMER.

This patch removes platform specific build flag and adds generic
flag `USE_SP804_TIMER` to be set to 1 by platform if needed.

Change-Id: I5ab792c189885fd1b98ddd187f3a38ebdd0baba2
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

Makefile

@@ -914,6 +914,7 @@ $(eval $(call assert_boolean,ENCRYPT_BL32))
 $(eval $(call assert_boolean,ERRATA_SPECULATIVE_AT))
 $(eval $(call assert_boolean,RAS_TRAP_LOWER_EL_ERR_ACCESS))
 $(eval $(call assert_boolean,COT_DESC_IN_DTB))
+$(eval $(call assert_boolean,USE_SP804_TIMER))
 
 $(eval $(call assert_numeric,ARM_ARCH_MAJOR))
 $(eval $(call assert_numeric,ARM_ARCH_MINOR))
@@ -995,6 +996,7 @@ $(eval $(call add_define,USE_SPINLOCK_CAS))
 $(eval $(call add_define,ERRATA_SPECULATIVE_AT))
 $(eval $(call add_define,RAS_TRAP_LOWER_EL_ERR_ACCESS))
 $(eval $(call add_define,COT_DESC_IN_DTB))
+$(eval $(call add_define,USE_SP804_TIMER))
 
 ifeq (${SANITIZE_UB},trap)
         $(eval $(call add_define,MONITOR_TRAPS))

docs/getting_started/build-options.rst

@@ -725,6 +725,10 @@ Common build options
   path on the host machine which is used to build certificate generation and
   firmware encryption tool.
 
+- ``USE_SP804_TIMER``: Use the SP804 timer instead of the Generic Timer for
+  functions that wait for an arbitrary time length (udelay and mdelay). The
+  default value is 0.
+
 GICv3 driver options
 --------------------
 

docs/plat/arm/fvp/index.rst

@@ -123,10 +123,6 @@ Arm FVP Platform Specific Build Options
    -  ``FVP_GICV2`` : The GICv2 only driver is selected
    -  ``FVP_GICV3`` : The GICv3 only driver is selected (default option)
 
--  ``FVP_USE_SP804_TIMER`` : Use the SP804 timer instead of the Generic Timer
-   for functions that wait for an arbitrary time length (udelay and mdelay).
-   The default value is 0.
-
 -  ``FVP_HW_CONFIG_DTS`` : Specify the path to the DTS file to be compiled
    to DTB and packaged in FIP as the HW_CONFIG. See :ref:`Firmware Design` for
    details on HW_CONFIG. By default, this is initialized to a sensible DTS

make_helpers/defaults.mk

@@ -311,3 +311,6 @@ COT_DESC_IN_DTB			:= 0
 
 # Build option to provide openssl directory path
 OPENSSL_DIR			:= /usr
+
+# Build option to use the SP804 timer instead of the generic one
+USE_SP804_TIMER			:= 0

plat/arm/board/fvp/fvp_common.c

@@ -420,7 +420,7 @@ int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
 
 void fvp_timer_init(void)
 {
-#if FVP_USE_SP804_TIMER
+#if USE_SP804_TIMER
 	/* Enable the clock override for SP804 timer 0, which means that no
 	 * clock dividers are applied and the raw (35MHz) clock will be used.
 	 */
@@ -435,5 +435,5 @@ void fvp_timer_init(void)
 	/* Enable System level generic timer */
 	mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF,
 			CNTCR_FCREQ(0U) | CNTCR_EN);
-#endif /* FVP_USE_SP804_TIMER */
+#endif /* USE_SP804_TIMER */
 }

plat/arm/board/fvp/platform.mk

@@ -7,9 +7,6 @@
 # Use the GICv3 driver on the FVP by default
 FVP_USE_GIC_DRIVER	:= FVP_GICV3
 
-# Use the SP804 timer instead of the generic one
-FVP_USE_SP804_TIMER	:= 0
-
 # Default cluster count for FVP
 FVP_CLUSTER_COUNT	:= 2
 
@@ -21,9 +18,6 @@ FVP_MAX_PE_PER_CPU	:= 1
 
 FVP_DT_PREFIX		:= fvp-base-gicv3-psci
 
-$(eval $(call assert_boolean,FVP_USE_SP804_TIMER))
-$(eval $(call add_define,FVP_USE_SP804_TIMER))
-
 # The FVP platform depends on this macro to build with correct GIC driver.
 $(eval $(call add_define,FVP_USE_GIC_DRIVER))
 
@@ -155,7 +149,7 @@ BL1_SOURCES		+=	drivers/arm/smmu/smmu_v3.c			\
 				${FVP_CPU_LIBS}					\
 				${FVP_INTERCONNECT_SOURCES}
 
-ifeq (${FVP_USE_SP804_TIMER},1)
+ifeq (${USE_SP804_TIMER},1)
 BL1_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
 else
 BL1_SOURCES		+=	drivers/delay_timer/generic_delay_timer.c
@@ -182,14 +176,14 @@ BL2_SOURCES		+=	plat/arm/board/fvp/${ARCH}/fvp_helpers.S	\
 				${FVP_INTERCONNECT_SOURCES}
 endif
 
-ifeq (${FVP_USE_SP804_TIMER},1)
+ifeq (${USE_SP804_TIMER},1)
 BL2_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
 endif
 
 BL2U_SOURCES		+=	plat/arm/board/fvp/fvp_bl2u_setup.c		\
 				${FVP_SECURITY_SOURCES}
 
-ifeq (${FVP_USE_SP804_TIMER},1)
+ifeq (${USE_SP804_TIMER},1)
 BL2U_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
 endif
 
@@ -223,7 +217,7 @@ endif
 
 endif
 
-ifeq (${FVP_USE_SP804_TIMER},1)
+ifeq (${USE_SP804_TIMER},1)
 BL31_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
 else
 BL31_SOURCES		+=	drivers/delay_timer/generic_delay_timer.c

plat/arm/board/fvp_ve/fvp_ve_bl2_setup.c

@@ -25,7 +25,7 @@ void bl2_platform_setup(void)
 {
 	arm_bl2_platform_setup();
 
-#ifdef FVP_VE_USE_SP804_TIMER
+#if USE_SP804_TIMER
 	/*
 	 * Enable the clock override for SP804 timer 0, which means that no
 	 * clock dividers are applied and the raw (35 MHz) clock will be used
@@ -37,5 +37,5 @@ void bl2_platform_setup(void)
 			SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV);
 #else
 	generic_delay_timer_init();
-#endif /* FVP_VE_USE_SP804_TIMER */
+#endif /* USE_SP804_TIMER */
 }

plat/arm/board/fvp_ve/platform.mk

@@ -6,8 +6,7 @@
 
 ifdef ARM_CORTEX_A5
 # Use the SP804 timer instead of the generic one
-FVP_VE_USE_SP804_TIMER	:= 1
-$(eval $(call add_define,FVP_VE_USE_SP804_TIMER))
+USE_SP804_TIMER	:= 1
 BL2_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
 endif