rockchip/rk3399: Split M0 binary into two
All the m0 code run in SRAM before, but we need to watch PMU_POWER_ST when SOC enter into FSM, and SRAM will shutdown during this time, so this code need run in PMUSRAM. But PMUSRAM only 8K space, we can not put all the m0 binary into PMUSRAM, Split the M0 binary into two, dram part still run in SRAM, and suspend part run in PMUSRAM. Change-Id: Ie08bdf3e2b8838f12b9297fe60ab0aad219684b1 Signed-off-by: Lin Huang <hl@rock-chips.com>
This commit is contained in:
Lin Huang
parent
133598cb7d
commit
ff4735cfdf
|
|
@ -1964,9 +1964,6 @@ uint32_t dram_set_odt_pd(uint32_t arg0, uint32_t arg1, uint32_t arg2)
|
|||
|
||||
static void m0_configure_ddr(struct pll_div pll_div, uint32_t ddr_index)
|
||||
{
|
||||
/* set PARAM to M0_FUNC_DRAM */
|
||||
mmio_write_32(M0_PARAM_ADDR + PARAM_M0_FUNC, M0_FUNC_DRAM);
|
||||
|
||||
mmio_write_32(M0_PARAM_ADDR + PARAM_DPLL_CON0, FBDIV(pll_div.fbdiv));
|
||||
mmio_write_32(M0_PARAM_ADDR + PARAM_DPLL_CON1,
|
||||
POSTDIV2(pll_div.postdiv2) | POSTDIV1(pll_div.postdiv1) |
|
||||
|
|
@ -1976,6 +1973,7 @@ static void m0_configure_ddr(struct pll_div pll_div, uint32_t ddr_index)
|
|||
|
||||
mmio_write_32(M0_PARAM_ADDR + PARAM_FREQ_SELECT, ddr_index << 4);
|
||||
dmbst();
|
||||
m0_configure_execute_addr(M0_BINCODE_BASE);
|
||||
}
|
||||
|
||||
static uint32_t prepare_ddr_timing(uint32_t mhz)
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@ ARCH := cortex-m0
|
|||
|
||||
# Build platform
|
||||
PLAT_M0 ?= rk3399m0
|
||||
PLAT_M0_PMU ?= rk3399m0pmu
|
||||
|
||||
ifeq (${V},0)
|
||||
Q=@
|
||||
|
|
@ -26,11 +27,10 @@ INCLUDES += -Iinclude/ \
|
|||
-I../../include/shared/
|
||||
|
||||
# NOTE: Add C source files here
|
||||
C_SOURCES := src/startup.c \
|
||||
src/main.c \
|
||||
src/suspend.c \
|
||||
src/dram.c \
|
||||
C_SOURCES_COMMON := src/startup.c
|
||||
C_SOURCES := src/dram.c \
|
||||
src/stopwatch.c
|
||||
C_SOURCES_PMU := src/suspend.c
|
||||
|
||||
# Flags definition
|
||||
COMMON_FLAGS := -g -mcpu=$(ARCH) -mthumb -Wall -O3 -nostdlib -mfloat-abi=soft
|
||||
|
|
@ -54,12 +54,19 @@ define SOURCES_TO_OBJS
|
|||
$(notdir $(patsubst %.S,%.o,$(filter %.S,$(1))))
|
||||
endef
|
||||
|
||||
SOURCES_COMMON := $(C_SOURCES_COMMON)
|
||||
SOURCES := $(C_SOURCES)
|
||||
SOURCES_PMU := $(C_SOURCES_PMU)
|
||||
OBJS_COMMON := $(addprefix $(BUILD)/,$(call SOURCES_TO_OBJS,$(SOURCES_COMMON)))
|
||||
OBJS := $(addprefix $(BUILD)/,$(call SOURCES_TO_OBJS,$(SOURCES)))
|
||||
OBJS_PMU := $(addprefix $(BUILD)/,$(call SOURCES_TO_OBJS,$(SOURCES_PMU)))
|
||||
LINKERFILE := $(BUILD)/$(PLAT_M0).ld
|
||||
MAPFILE := $(BUILD)/$(PLAT_M0).map
|
||||
MAPFILE_PMU := $(BUILD)/$(PLAT_M0_PMU).map
|
||||
ELF := $(BUILD)/$(PLAT_M0).elf
|
||||
ELF_PMU := $(BUILD)/$(PLAT_M0_PMU).elf
|
||||
BIN := $(BUILD)/$(PLAT_M0).bin
|
||||
BIN_PMU := $(BUILD)/$(PLAT_M0_PMU).bin
|
||||
LINKERFILE_SRC := src/$(PLAT_M0).ld.S
|
||||
|
||||
# Function definition related compilation
|
||||
|
|
@ -92,18 +99,27 @@ define MAKE_OBJS
|
|||
$(and $(REMAIN),$(error Unexpected source files present: $(REMAIN)))
|
||||
endef
|
||||
|
||||
.DEFAULT_GOAL := $(BIN)
|
||||
.PHONY: all
|
||||
all: $(BIN) $(BIN_PMU)
|
||||
|
||||
.DEFAULT_GOAL := all
|
||||
|
||||
$(LINKERFILE): $(LINKERFILE_SRC)
|
||||
$(CC) $(COMMON_FLAGS) $(INCLUDES) -P -E -D__LINKER__ -MMD -MF $@.d -MT $@ -o $@ $<
|
||||
-include $(LINKERFILE).d
|
||||
|
||||
$(ELF) : $(OBJS) $(LINKERFILE)
|
||||
$(ELF) : $(OBJS) $(OBJS_COMMON) $(LINKERFILE)
|
||||
@echo " LD $@"
|
||||
$(Q)$(CC) -o $@ $(COMMON_FLAGS) $(LDFLAGS) -Wl,-Map=$(MAPFILE) -Wl,-T$(LINKERFILE) $(OBJS)
|
||||
$(Q)$(CC) -o $@ $(COMMON_FLAGS) $(LDFLAGS) -Wl,-Map=$(MAPFILE) -Wl,-T$(LINKERFILE) $(OBJS) $(OBJS_COMMON)
|
||||
|
||||
$(BIN) : $(ELF)
|
||||
%.bin : %.elf
|
||||
@echo " BIN $@"
|
||||
$(Q)$(OC) -O binary $< $@
|
||||
|
||||
$(ELF_PMU) : $(OBJS_COMMON) $(OBJS_PMU) $(LINKERFILE)
|
||||
@echo " LD $@"
|
||||
$(Q)$(CC) -o $@ $(COMMON_FLAGS) $(LDFLAGS) -Wl,-Map=$(MAPFILE_PMU) -Wl,-T$(LINKERFILE) $(OBJS_PMU) $(OBJS_COMMON)
|
||||
|
||||
$(eval $(call MAKE_OBJS,$(BUILD),$(SOURCES_COMMON),$(1)))
|
||||
$(eval $(call MAKE_OBJS,$(BUILD),$(SOURCES),$(1)))
|
||||
$(eval $(call MAKE_OBJS,$(BUILD),$(SOURCES_PMU),$(1)))
|
||||
|
|
|
|||
|
|
@ -25,8 +25,6 @@ typedef unsigned int uint32_t;
|
|||
#define MIN(a, b) ((a) < (b) ? (a) : (b))
|
||||
#define MAX(a, b) ((a) > (b) ? (a) : (b))
|
||||
|
||||
void handle_suspend(void);
|
||||
void handle_dram(void);
|
||||
void stopwatch_init_usecs_expire(unsigned int usecs);
|
||||
int stopwatch_expired(void);
|
||||
void stopwatch_reset(void);
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ static void ddr_set_pll(void)
|
|||
mmio_write_32(CRU_BASE + CRU_DPLL_CON3, PLL_MODE(PLL_NORMAL_MODE));
|
||||
}
|
||||
|
||||
void handle_dram(void)
|
||||
__attribute__((noreturn)) void main(void)
|
||||
{
|
||||
mmio_setbits_32(PHY_REG(0, 927), (1 << 22));
|
||||
mmio_setbits_32(PHY_REG(1, 927), (1 << 22));
|
||||
|
|
@ -76,4 +76,9 @@ void handle_dram(void)
|
|||
deidle_port();
|
||||
mmio_clrbits_32(PHY_REG(0, 927), (1 << 22));
|
||||
mmio_clrbits_32(PHY_REG(1, 927), (1 << 22));
|
||||
|
||||
mmio_write_32(PARAM_ADDR + PARAM_M0_DONE, M0_DONE_FLAG);
|
||||
|
||||
for (;;)
|
||||
__asm__ volatile ("wfi");
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,27 +0,0 @@
|
|||
/*
|
||||
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#include <m0_param.h>
|
||||
#include "rk3399_mcu.h"
|
||||
|
||||
__attribute__((noreturn)) void main(void)
|
||||
{
|
||||
switch (mmio_read_32(PARAM_ADDR + PARAM_M0_FUNC)) {
|
||||
case M0_FUNC_SUSPEND:
|
||||
handle_suspend();
|
||||
break;
|
||||
case M0_FUNC_DRAM:
|
||||
handle_dram();
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
mmio_write_32(PARAM_ADDR + PARAM_M0_DONE, M0_DONE_FLAG);
|
||||
|
||||
for (;;)
|
||||
__asm__ volatile ("wfi");
|
||||
}
|
||||
|
|
@ -7,7 +7,7 @@
|
|||
#include "rk3399_mcu.h"
|
||||
|
||||
/* Stack configuration */
|
||||
#define STACK_SIZE 0x00000100
|
||||
#define STACK_SIZE 0x00000040
|
||||
__attribute__ ((section(".co_stack")))
|
||||
unsigned long pstack[STACK_SIZE];
|
||||
|
||||
|
|
|
|||
|
|
@ -11,18 +11,52 @@
|
|||
|
||||
#define SCR_SLEEPDEEP_SHIFT (1 << 2)
|
||||
|
||||
void handle_suspend(void)
|
||||
__attribute__((noreturn)) void main(void)
|
||||
{
|
||||
unsigned int status_value;
|
||||
|
||||
/*
|
||||
* PMU sometimes doesn't clear power mode bit as it's supposed to due
|
||||
* to a hardware bug. Make the M0 clear it manually to be sure,
|
||||
* otherwise interrupts some cases with concurrent wake interrupts
|
||||
* we stay asleep forever.
|
||||
*/
|
||||
while (1) {
|
||||
status_value = mmio_read_32(PMU_BASE + PMU_POWER_ST);
|
||||
if (status_value) {
|
||||
mmio_clrbits_32(PMU_BASE + PMU_PWRMODE_CON, 0x01);
|
||||
return;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* m0 enter deep sleep mode */
|
||||
mmio_setbits_32(M0_SCR, SCR_SLEEPDEEP_SHIFT);
|
||||
/*
|
||||
* FSM power secquence is .. -> ST_INPUT_CLAMP(step.17) -> .. ->
|
||||
* ST_WAKEUP_RESET -> ST_EXT_PWRUP-> ST_RELEASE_CLAMP ->
|
||||
* ST_24M_OSC_EN -> .. -> ST_WAKEUP_RESET_CLR(step.26) -> ..,
|
||||
* INPUT_CLAMP and WAKEUP_RESET will hold the SOC not affect by
|
||||
* power or other single glitch, but WAKEUP_RESET need work with 24MHz,
|
||||
* so between RELEASE_CLAMP and 24M_OSC_EN, there have a chance
|
||||
* that glitch will affect SOC, and mess up SOC status, so we
|
||||
* addressmap_shared software clamp between ST_INPUT_CLAMP and
|
||||
* ST_WAKEUP_RESET_CLR to avoid this happen.
|
||||
*/
|
||||
while (1) {
|
||||
status_value = mmio_read_32(PMU_BASE + PMU_POWER_ST);
|
||||
if (status_value >= 17) {
|
||||
mmio_setbits_32(PMU_BASE + PMU_SFT_CON, 0x02);
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
while (1) {
|
||||
status_value = mmio_read_32(PMU_BASE + PMU_POWER_ST);
|
||||
if (status_value >= 26) {
|
||||
mmio_clrbits_32(PMU_BASE + PMU_SFT_CON, 0x02);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
for (;;)
|
||||
__asm__ volatile ("wfi");
|
||||
}
|
||||
|
|
|
|||
|
|
@ -21,14 +21,6 @@ void m0_init(void)
|
|||
mmio_write_32(SGRF_BASE + SGRF_PMU_CON(0), WMSK_BIT(7));
|
||||
mmio_write_32(SGRF_BASE + SGRF_SOC_CON(6), WMSK_BIT(12));
|
||||
|
||||
/* set the execute address for M0 */
|
||||
mmio_write_32(SGRF_BASE + SGRF_PMU_CON(3),
|
||||
BITS_WITH_WMASK((M0_BINCODE_BASE >> 12) & 0xffff,
|
||||
0xffff, 0));
|
||||
mmio_write_32(SGRF_BASE + SGRF_PMU_CON(7),
|
||||
BITS_WITH_WMASK((M0_BINCODE_BASE >> 28) & 0xf,
|
||||
0xf, 0));
|
||||
|
||||
/* document is wrong, PMU_CRU_GATEDIS_CON0 do not need set MASK BIT */
|
||||
mmio_setbits_32(PMUCRU_BASE + PMUCRU_GATEDIS_CON0, 0x02);
|
||||
|
||||
|
|
@ -46,6 +38,17 @@ void m0_init(void)
|
|||
mmio_write_32(PMUCRU_BASE + PMUCRU_CLKGATE_CON2, WMSK_BIT(5));
|
||||
}
|
||||
|
||||
void m0_configure_execute_addr(uintptr_t addr)
|
||||
{
|
||||
/* set the execute address for M0 */
|
||||
mmio_write_32(SGRF_BASE + SGRF_PMU_CON(3),
|
||||
BITS_WITH_WMASK((addr >> 12) & 0xffff,
|
||||
0xffff, 0));
|
||||
mmio_write_32(SGRF_BASE + SGRF_PMU_CON(7),
|
||||
BITS_WITH_WMASK((addr >> 28) & 0xf,
|
||||
0xf, 0));
|
||||
}
|
||||
|
||||
void m0_start(void)
|
||||
{
|
||||
/* enable clocks for M0 */
|
||||
|
|
|
|||
|
|
@ -11,13 +11,18 @@
|
|||
|
||||
#define M0_BINCODE_BASE ((uintptr_t)rk3399m0_bin)
|
||||
#define M0_PARAM_ADDR (M0_BINCODE_BASE + PARAM_ADDR)
|
||||
#define M0PMU_BINCODE_BASE ((uintptr_t)rk3399m0pmu_bin)
|
||||
|
||||
/* pmu_fw.c */
|
||||
extern char rk3399m0_bin[];
|
||||
extern char rk3399m0_bin_end[];
|
||||
|
||||
extern char rk3399m0pmu_bin[];
|
||||
extern char rk3399m0pmu_bin_end[];
|
||||
|
||||
extern void m0_init(void);
|
||||
extern void m0_start(void);
|
||||
extern void m0_stop(void);
|
||||
extern void m0_wait_done(void);
|
||||
extern void m0_configure_execute_addr(uintptr_t addr);
|
||||
#endif /* __M0_CTL_H__ */
|
||||
|
|
|
|||
|
|
@ -1064,12 +1064,6 @@ static void resume_gpio(void)
|
|||
}
|
||||
}
|
||||
|
||||
static void m0_configure_suspend(void)
|
||||
{
|
||||
/* set PARAM to M0_FUNC_SUSPEND */
|
||||
mmio_write_32(M0_PARAM_ADDR + PARAM_M0_FUNC, M0_FUNC_SUSPEND);
|
||||
}
|
||||
|
||||
void sram_save(void)
|
||||
{
|
||||
size_t text_size = (char *)&__bl31_sram_text_real_end -
|
||||
|
|
@ -1344,7 +1338,7 @@ int rockchip_soc_sys_pwr_dm_suspend(void)
|
|||
set_pmu_rsthold();
|
||||
sys_slp_config();
|
||||
|
||||
m0_configure_suspend();
|
||||
m0_configure_execute_addr(M0PMU_BINCODE_BASE);
|
||||
m0_start();
|
||||
|
||||
pmu_sgrf_rst_hld();
|
||||
|
|
|
|||
|
|
@ -5,9 +5,9 @@
|
|||
*/
|
||||
|
||||
/* convoluted way to make sure that the define is pasted just the right way */
|
||||
#define _INCBIN(file, sym) \
|
||||
#define _INCBIN(file, sym, sec) \
|
||||
__asm__( \
|
||||
".section .sram.incbin\n" \
|
||||
".section " #sec "\n" \
|
||||
".global " #sym "\n" \
|
||||
".type " #sym ", %object\n" \
|
||||
".align 4\n" \
|
||||
|
|
@ -18,6 +18,7 @@
|
|||
#sym "_end:\n" \
|
||||
)
|
||||
|
||||
#define INCBIN(file, sym) _INCBIN(file, sym)
|
||||
#define INCBIN(file, sym, sec) _INCBIN(file, sym, sec)
|
||||
|
||||
INCBIN(RK3399M0FW, rk3399m0_bin);
|
||||
INCBIN(RK3399M0FW, rk3399m0_bin, ".sram.incbin");
|
||||
INCBIN(RK3399M0PMUFW, rk3399m0pmu_bin, ".pmusram.incbin");
|
||||
|
|
|
|||
|
|
@ -77,14 +77,21 @@ SECTIONS
|
|||
ASSERT(. == ALIGN(64 * 1024),
|
||||
".pmusram.entry request 64K aligned.");
|
||||
*(.pmusram.entry)
|
||||
|
||||
__bl31_pmusram_text_start = .;
|
||||
*(.pmusram.text)
|
||||
*(.pmusram.rodata)
|
||||
__bl31_pmusram_text_end = .;
|
||||
|
||||
/* M0 start address request 4K align */
|
||||
. = ALIGN(4096);
|
||||
__pmusram_incbin_start = .;
|
||||
*(.pmusram.incbin)
|
||||
__pmusram_incbin_end = .;
|
||||
|
||||
__bl31_pmusram_data_start = .;
|
||||
*(.pmusram.data)
|
||||
__bl31_pmusram_data_end = .;
|
||||
|
||||
} >PMUSRAM
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -7,13 +7,6 @@
|
|||
#ifndef __M0_PARAM_H__
|
||||
#define __M0_PARAM_H__
|
||||
|
||||
#ifndef __LINKER__
|
||||
enum {
|
||||
M0_FUNC_SUSPEND = 0,
|
||||
M0_FUNC_DRAM = 1,
|
||||
};
|
||||
#endif /* __LINKER__ */
|
||||
|
||||
#define PARAM_ADDR 0xc0
|
||||
|
||||
#define PARAM_M0_FUNC 0x00
|
||||
|
|
|
|||
|
|
@ -82,12 +82,15 @@ BUILD_M0 := ${BUILD_PLAT}/m0
|
|||
RK3399M0FW=${BUILD_M0}/${PLAT_M0}.bin
|
||||
$(eval $(call add_define,RK3399M0FW))
|
||||
|
||||
RK3399M0PMUFW=${BUILD_M0}/${PLAT_M0}pmu.bin
|
||||
$(eval $(call add_define,RK3399M0PMUFW))
|
||||
|
||||
HDCPFW=${RK_PLAT_SOC}/drivers/dp/hdcp.bin
|
||||
$(eval $(call add_define,HDCPFW))
|
||||
|
||||
# CCACHE_EXTRAFILES is needed because ccache doesn't handle .incbin
|
||||
export CCACHE_EXTRAFILES
|
||||
${BUILD_PLAT}/bl31/pmu_fw.o: CCACHE_EXTRAFILES=$(RK3399M0FW)
|
||||
${BUILD_PLAT}/bl31/pmu_fw.o: CCACHE_EXTRAFILES=$(RK3399M0FW):$(RK3399M0PMUFW)
|
||||
${RK_PLAT_SOC}/drivers/pmu/pmu_fw.c: $(RK3399M0FW)
|
||||
|
||||
${BUILD_PLAT}/bl31/cdn_dp.o: CCACHE_EXTRAFILES=$(HDCPFW)
|
||||
|
|
|
|||
Loading…
Reference in New Issue