Commit Graph

8 Commits

Author SHA1 Message Date
Yann Gautier a3d39cc763 stm32mp1: add an IO to read MMC devices
Whereas the GPT table is read with io_block, the binaries to be loaded
(e.g. BL33) cannot use it, as it is not suitable to read them block by
block, or the boot time would be very bad.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
2018-10-15 09:36:44 +02:00
Yann Gautier ceaff75c9f stm32mp1: add an IO to read STM32IMAGE binaries
This IO is required to read binaries with STM32 header.
This header is added with the stm32image tool.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
2018-10-15 09:36:32 +02:00
Yann Gautier 8e2e5e8b18 stm32mp1: add sdmmc2 driver
This driver is for the STMicroelectronics sdmmc2 IP
which is in STM32MP1 SoC.
It uses the MMC framework, and can address either eMMC or SD-card.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
2018-10-15 09:36:04 +02:00
Yann Gautier 10a511ceaa stm32mp1: Add DDR support and its security with TZC400
The DDR driver is under dual license, BSD and GPLv2.
The configuration parameters are taken from device tree.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
2018-07-24 17:18:19 +02:00
Yann Gautier e4f559ff54 stm32mp1: Add PMIC support
If a PMIC companion chip is present on board, it has to be configured
for regulators supplies.
This check is done with board DT configuration.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Pascal Paillet <p.paillet@st.com>
2018-07-24 17:15:13 +02:00
Yann Gautier 6a339a4952 stm32mp1: Add GPIO support
The management of pinctrl nodes of device tree is also added.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
2018-07-24 17:14:08 +02:00
Yann Gautier 7839a05090 stm32mp1: Add clock and reset support
The clock driver is under dual license, BSD and GPLv2.
The clock driver uses device tree, so a minimal support for this is added.
The required files for driver and DTS files are in include/dt-bindings/.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
2018-07-24 17:13:36 +02:00
Yann Gautier 4353bb20cc Introduce STMicroelectronics STM32MP1 platform
STM32MP1 is a microprocessor designed by STMicroelectronics,
based on a dual Arm Cortex-A7.
It is an Armv7-A platform, using dedicated code from TF-A.

STM32MP1 uses BL2 compiled with BL2_AT_EL3.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Mathieu Belou <mathieu.belou@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Pascal Paillet <p.paillet@st.com>
2018-07-24 17:11:43 +02:00