The current fiptool packs all the images without any padding between
them. So, the offset to each image has no alignment. This is not
efficient, for example, when the FIP is read from a block-oriented
device.
For example, (e)MMC is accessed by block-addressing. The block size
is 512 byte. So, the best case is each image is aligned by 512 byte
since the DMA engine can transfer the whole of the image to its load
address directly. The worst case is the offset does not have even
DMA-capable alignment (this is where we stand now). In this case,
we need to transfer every block to a bounce buffer, then do memcpy()
from the bounce buffer to our final destination. At least, this
should work with the abstraction by the block I/O layer, but the
CPU-intervention for the whole data transfer makes it really slow.
This commit adds a new option --align to the fiptool. This option,
if given, requests the tool to align each component in the FIP file
by the specified byte. Also, add a new Make option FIP_ALIGN for
easier access to this feature; users can give something like
FIP_ALIGN=512 from the command line, or add "FIP_ALIGN := 512" to
their platform.mk file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The struct image has "uuid" and "size" to memorize the field values
they had in the TOC entry. So, parse_fip() copies them from struct
fip_toc_entry to struct image, then pack_images() copies them back
to struct fip_toc_entry.
The next commit (support --align option) will require to save the
"offset" field as well. This makes me realize that struct image
can embed struct fip_toc_entry.
This commit will allow the "flags" field to persevere the "update"
command. At this moment, the "flags" is not used in a useful way.
(Yet, platforms can save their own parameters in the flags field.)
It makes sense to save it unless users explicitly replace the image.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We need not handle the image_head as a special case. Just use
a double-pointer to simplify the traverse.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
lookup_image(_desc)_from_uuid() traverses the linked list, so it
is not efficient. We just want to make sure *p points to NULL here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit e0f083a09b ("fiptool: Prepare ground for expanding the set
of images at runtime") introduced another side effect; the "update"
command now changes the image order in the FIP.
Let's say you have an FIP with BL2, BL31, BL32, BL33. If you update
for example, BL32 with the "update" command, you will get a new FIP
with BL2, BL31, BL33, BL32, in this order.
It happens like this; remove_image() removes the old image from the
linked list, add_image() adds the new image at the tail of the list,
then images are packed in the new order. Prior to that commit,
images were updated by replace_image(), but it was deleted by the
re-work. Revive replace_image() that is re-implemented to work with
the linked list.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The conditional
if (desc != NULL)
...
is always true here because we assert it 6 lines above:
assert(desc != NULL);
Remove the if-conditional and concatenate the printf() calls.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This line should check the existence of the input file, but it is
actually checking the output file. When -o option is given to the
"update" command, the outfile is unlikely to exist, then parse_fip()
is skipped and an empty FIP file is output. This is wrong behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The "make fip" shows the content of the generated FIP at the end of
the build. (This is shown by "fiptool info" command.)
Prior to commit e0f083a09b ("fiptool: Prepare ground for expanding
the set of images at runtime"), the last part of the build log of
make CROSS_COMPILE=aarch64-linux-gnu- BL33=../u-boot/u-boot.bin fip
was like follows:
Trusted Boot Firmware BL2: offset=0xB0, size=0x4188, cmdline="--tb-fw"
EL3 Runtime Firmware BL31: offset=0x4238, size=0x6090, cmdline="--soc-fw"
Non-Trusted Firmware BL33: offset=0xA2C8, size=0x58B51, cmdline="--nt-fw"
With that commit, now it is displayed like follows:
Non-Trusted Firmware BL33: offset=0xB0, size=0x58B51, cmdline="--nt-fw"
EL3 Runtime Firmware BL31: offset=0x58C01, size=0x6090, cmdline="--soc-fw"
Trusted Boot Firmware BL2: offset=0x5EC91, size=0x4188, cmdline="--tb-fw"
You will notice two differences:
- the contents are displayed in BL33, BL31, BL2 order
- the offset values are wrong
The latter is more serious, and means "fiptool info" is broken.
Another interesting change is "fiptool update" every time reverses
the image order. For example, if you input FIP with BL2, BL31, BL33
in this order, the command will pack BL33, BL31, BL2 into FIP, in
this order. Of course, the order of components is not a big deal
except that users will have poor impression about this.
The root cause is in the implementation of add_image(); the
image_head points to the last added image. For example, if you call
add_image() for BL2, BL31, BL33 in this order, the resulted image
chain is:
image_head -> BL33 -> BL31 -> BL2
Then, they are processed from the image_head in "for" loops:
for (image = image_head; image != NULL; image = image->next) {
This means images are handled in Last-In First-Out manner.
Interestingly, "fiptool create" is still correct because
add_image_desc() also reverses the descriptor order and the command
works as before due to the double reverse.
The implementation of add_image() is efficient, but it made the
situation too complicated.
Let's make image_head point to the first added image. This will
add_image() inefficient because every call of add_image() follows
the ->next chain to get the tail. We can solve it by adopting a
nicer linked list structure, but I am not doing as far as that
because we handle only limited number of images anyway.
Do likewise for add_image_desc().
Fixes: e0f083a09b ("fiptool: Prepare ground for expanding the set of images at runtime")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We often want to zero out allocated memory.
My main motivation for this commit is to set image::next and
image_desc::next to NULL automatically in the next commit.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
An image descriptor contains an action and an argument. The action
indicates the intended operation, as requested by the user. It can be
pack, unpack or remove. Factor out setting those fields to a separate
function to minimize code duplication across the various commands that
modify these fields.
Change-Id: I1682958e8e83c4884e435cff6d0833c67726461f
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Previously, fiptool only understood a fixed set of images as
specified in tbbr_config.c. It preserved unknown images during
the update, unpack and remove operations but it was not possible to
explicitly refer to one of those unknown images.
Add a new --blob option to create/update/unpack/remove images that
are not known at compile time. This is accomplished by specifying
the UUID and filename pair as shown below:
$ ./fiptool create --blob uuid=01234567-89ab-cdef-0123-456789abcdef,file=foo.bin fip.bin
$ ./fiptool info fip.bin
01234567-89ab-cdef-0123-456789abcdef: offset=0x60, size=0x1AA68
FixesARM-software/tf-issues#420
Change-Id: Iaac2504b9a4252289c09e73d29645cbe240f3a82
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
To allow operating on images with unknown UUIDs, fiptool needs to
be able to track an arbitrary amount of images and not be limited
to the set of images described by the builtin table.
Convert the table to a list to accommodate this scenario.
Change-Id: I0e6d738eece7795d74fc72d165a3098f223d4414
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Additionally, remove the -o option for the create command
as it is not supported.
Change-Id: I27993a6fc5e3b0b9710e2ec5322e4296bc87d0df
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
The `toc_entry` and `image` data structures had a cyclic
relationship. This patch removes the explicit dependencies and introduces
functions to link them via the UUID.
This change highlights the intent of the code better and makes it more
flexible for future enhancements.
Change-Id: I0c3dd7bfda2a631a3827c8ba4831849c500affe9
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>
Instead of always calling the top level usage function when an
error is detected, call the command-specific usage function.
For example running `fiptool create` will produce the same output
as `fiptool help create`. This is more convenient for the user
when they make a mistake.
Change-Id: I60178ab89d47adf93cdfe6d8b5d5f778a5ea3bca
This feature allows one to quickly verify that the expected
image is contained in the FIP without extracting the image and
running sha256sum(1) on it.
The sha256 digest is only shown when the verbose flag is used.
This change requires libssl-dev to be installed in order to build
Trusted Firmware. Previously, libssl-dev was optionally needed only
to support Trusted Board Boot configurations.
FixesARM-Software/tf-issues#124
Change-Id: Ifb1408d17f483d482bb270a589ee74add25ec5a6
fiptool provides a more consistent and intuitive interface compared to
the fip_create program. It serves as a better base to build on more
features in the future.
fiptool supports various subcommands. Below are the currently
supported subcommands:
1) info - List the images contained in a FIP file.
2) create - Create a new FIP file with the given images.
3) update - Update an existing FIP with the given images.
4) unpack - Extract a selected set or all the images from a FIP file.
5) remove - Remove images from a FIP file. This is a new command that
was not present in fip_create.
To create a new FIP file, replace "fip_create" with "fiptool create".
To update a FIP file, replace "fip_create" with "fiptool update".
To dump the contents of a FIP file, replace "fip_create --dump" with
"fiptool info".
A compatibility script that emulates the basic functionality of
fip_create is provided. Existing scripts might or might not work with
the compatibility script. Users are strongly encouraged to migrate to
fiptool.
FixesARM-Software/tf-issues#87FixesARM-Software/tf-issues#108FixesARM-Software/tf-issues#361
Change-Id: I7ee4da7ac60179cc83cf46af890fd8bc61a53330
With the introduction of commit `96103d5a`, the Certificate
Generation tool is not able to generate FWU certificate and
while doing so it does segmentation fault.
This happens because it is now required to pass non-volatile
counter values to the `cert_create` tool from the command line
for creating the trusted firmware certificates.
But in case of creating FWU certificate these counter values are not
being passed to the tool and as a consequence the `cert_create` tool
try to use the NULL argument and errors out with Segmentation fault.
This patch fixes this issue by providing a check before using the
command line argument passed in the case of `EXT_TYPE_NVCOUNTER`
certificate extension.
Change-Id: Ie17d0c1502b52aaa8500f3659c2da2448ab0347a
* Move stdlib header files from include/stdlib to include/lib/stdlib for
consistency with other library headers.
* Fix checkpatch paths to continue excluding stdlib files.
* Create stdlib.mk to define the stdlib source files and include directories.
* Include stdlib.mk from the top level Makefile.
* Update stdlib header path in the fip_create Makefile.
* Update porting-guide.md with the new paths.
Change-Id: Ia92c2dc572e9efb54a783e306b5ceb2ce24d27fa
This patch adds support for image unpacking to the FIP packaging
tool. Command line option '-u,--unpack' may be used to unpack the
contents of an existing FIP file into the working directory. The
tool uses default hardcoded filenames for the unpacked images. If
the files already exist, they can be overwritten by specifying the
option '-f,--force'.
Change-Id: I360b11d9c5403e8c0a7a9cac32c1d90ebb228063
In some build environments executable programs have a specific file
extension. The value of BIN_EXT is appended to the relevant tool file
names to allow for this.
The value of BIN_EXT is set, where appropriate, by the build environment
specific make helper (to .exe for Windows build environments).
.gitignore is updated to hide the new (.exe) files.
Change-Id: Icc32f64b750e425265075ad4e0dea18129640b86
Replace some "recursively expanded" make variables with "simply
expanded" variables (i.e. replace = with :=). This has no functional
impact but is more consistent and theoretically more efficient.
Change-Id: Iaf33d7c8ad48464ae0d39923515d1e7f230c95c1
Some build environments do not support symbolic links. This patch
removes the symlinks previously used to build fip_create and instead
copies the relevant header files.
The original motivation for using symlinks was to avoid Trusted Firmware
library headers conflicting with headers in the compiler standard
include path. Copying the header files instead has the same effect.
Like other build artefacts, the copied files are listed in .gitignore.
The distclean targets have also been updated to remove the copies.
Change-Id: Ie8b67bcb133f7f1d660ae93b857950aa15e42b1e
Add make helper files to select the appropriate settings for the build
environment. Selection is made in make_helpers/build_env.mk, which
selects other files to include using generic build environment settings.
The Trusted Firmware Makefile and supporting tool Makefiles are updated
to include build_env.mk instead of unix.mk.
NOTE: This change does not fully enable builds in other build
environments. It facilitates this without compromising the
existing build environments.
Change-Id: Ic4064ffe6ce158bbd16d7cc9f27dd4655a3580f6
Macros are inserted to replace direct invocations of commands that are
problematic on some build environments. (e.g. Some environments expect
\ in paths instead of /.)
The changes take into account mismatched command mappings across
environments.
The new helper file unix.mk retains existing makefile behaviour on unix
like build environments by providing the following macro definitions:
SHELL_COPY cp -f
SHELL_COPY_TREE cp -rf
SHELL_DELETE rm -f
SHELL_DELETE_ALL rm -rf
MAKE_PREREQ_DIR mkdir -p (As make target)
SHELL_REMOVE_DIR rm -rf
Change-Id: I1b5ca5e1208e78230b15284c4af00c1c006cffcb
As an initial stage of making Trusted Firmware build environment more
portable, we remove most uses of the $(shell ) function and replace them
with more portable make function based solutions.
Note that the setting of BUILD_STRING still uses $(shell ) since it's
not possible to reimplement this as a make function. Avoiding invocation
of this on incompatible host platforms will be implemented separately.
Change-Id: I768e2f9a265c78814a4adf2edee4cc46cda0f5b8
This patch adds non-volatile counter support to the Certificate
Generation tool. The TBBR Chain of Trust definition in the tool
has been extended to include the counters as certificate extensions.
The counter values can be specified in the command line.
The following default counter values are specified in the build
system:
* Trusted FW Non-Volatile counter = 0
* Non-Trusted FW Non-Volatile counter = 0
These values can be overridden by the platform at build time.
Change-Id: I7ea10ee78d72748d181df4ee78a7169b3ef2720c
This patch introduces the following improvements:
* Global variables in fip_create.c declared static.
* Flags to signal the requested actions (do_dump, do_pack) made
global.
* The ToC is printed at the end of the main funcion, after the FIP
has been created/updated, not in the parse_cmdline() function.
* Short format added to the command line options (-d,--dump;
-h,--help).
* Help message updated.
Change-Id: I5f08273c76f1de45fe597e290bee4b60aa404df9
The help message printed by the cert_create tool using the command
line option -h (or --help) does not correctly list all the available
command line options.
This patch reworks the print_help() function to print the help
messages in a data driven approach. For each command line option
registered, an optional help message can be specified, which will
be printed by print_help().
Help messages for the TBBR options (certificates, keys and images)
are also provided.
Fix a small bug in the short options string passed to getopt_long:
the ':' was missing in the '-a' option (this option must take an
argument).
FixesARM-software/tf-issues#337
Change-Id: I9d08c2dfd349022808fcc884724f677eefdc1452
The fip_create tool specifies images in the command line using the
ARM TF naming convention (--bl2, --bl31, etc), while the cert_create
tool uses the TBBR convention (--tb-fw, --soc-fw, etc). This double
convention is confusing and should be aligned.
This patch updates the fip_create command line options to follow the
TBBR naming convention. Usage examples in the User Guide have been
also updated.
NOTE: users that build the FIP by calling the fip_create tool directly
from the command line must update the command line options in their
scripts. Users that build the FIP by invoking the main ARM TF Makefile
should not notice any difference.
Change-Id: I84d602630a2585e558d927b50dfde4dd2112496f
Masahiro Yamada
dp-arm
davidcunado-arm
danh-arm
Yatharth Kochar
Brendan Jackman
Juan Castillo
Evan Lloyd