Commit Graph

3 Commits

Author SHA1 Message Date
Thierry Bultel a29f6e76cb feat(allwinner): apx803: add aldo1 regulator
Notice that aldo1 is typically useful for the Olimex A64 board, where
it powers the PE bank through the vcc-pe line.
Without it, it is not possible to light the user led on PE17, for
instance.

Change-Id: I70588bc977b884b22df87f1b075549cb8925925a
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-02-21 16:26:54 +01:00
Andre Przywara 67412e4d7a feat(allwinner): allow to skip PMIC regulator setup
For somewhat historical reasons we are doing some initial PMIC regulator
setup in BL31, as U-Boot does not (yet) have a PMIC driver. This worked
fine so far, but there is at least one board (OrangePi 3) that gets upset,
because the Ethernet PHY needs some *coordinated* bringup of *two*
regulators.

To avoid custom hacks, let's introduce a build option to keep doing the
regulator setup in TF-A. Defining SUNXI_SETUP_REGULATORS to 0 will break
support for some devices on some boards in U-Boot (Ethernet and HDMI),
but will allow to bring up the OrangePi 3 in Linux correctly. We keep
the default at 1 to not change the behaviour for all other boards.

After U-Boot gained proper PMIC support at some point in the future, we
will probably change the default to 0, to get rid of the less optimal
PMIC code in TF-A.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Change-Id: Ie8e2583d0396f6eeaae8ffe6b6190f27db63e2a7
2021-12-27 15:32:22 +00:00
Samuel Holland 0bc752c9ad allwinner: Convert AXP803 regulator setup code into a driver
Previously, the A64/H5 and H6 platforms' PMIC setup code was entirely
independent. However, some H6 boards also need early regulator setup.

Most of the register interface and all of the device tree traversal code
can be reused between the AXP803 and AXP805. The main difference is the
hardware bus interface, so that part is left to the platforms. The
remainder is moved into a driver.

I factored out the bits that were obviously specific to the AXP803;
additional changes for compatibility with other PMICs can be made as
needed.

The only functional change is that rsb_init() now checks the PMIC's chip
ID register against the expected value. This was already being done in
the H6 version of the code.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Change-Id: Icdcf9edd6565f78cccc503922405129ac27e08a2
2019-12-13 19:22:34 -06:00