/* * Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of ARM nor the names of its contributors may be used * to endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef __BL_COMMON_H__ #define __BL_COMMON_H__ #define SECURE 0x0 #define NON_SECURE 0x1 #define sec_state_is_valid(s) (((s) == SECURE) || ((s) == NON_SECURE)) #define UP 1 #define DOWN 0 /******************************************************************************* * Constants to identify the location of a memory region in a given memory * layout. ******************************************************************************/ #define TOP 0x1 #define BOTTOM !TOP /******************************************************************************* * Constants that allow assembler code to access members of and the * 'entry_point_info' structure at their correct offsets. ******************************************************************************/ #define ENTRY_POINT_INFO_PC_OFFSET 0x08 #ifdef AARCH32 #define ENTRY_POINT_INFO_ARGS_OFFSET 0x10 #else #define ENTRY_POINT_INFO_ARGS_OFFSET 0x18 #endif /* The following are used to set/get image attributes. */ #define PARAM_EP_SECURITY_MASK (0x1) #define GET_SECURITY_STATE(x) (x & PARAM_EP_SECURITY_MASK) #define SET_SECURITY_STATE(x, security) \ ((x) = ((x) & ~PARAM_EP_SECURITY_MASK) | (security)) /* * The following are used for image state attributes. * Image can only be in one of the following state. */ #define IMAGE_STATE_RESET 0 #define IMAGE_STATE_COPIED 1 #define IMAGE_STATE_COPYING 2 #define IMAGE_STATE_AUTHENTICATED 3 #define IMAGE_STATE_EXECUTED 4 #define IMAGE_STATE_INTERRUPTED 5 #define EP_EE_MASK 0x2 #define EP_EE_LITTLE 0x0 #define EP_EE_BIG 0x2 #define EP_GET_EE(x) (x & EP_EE_MASK) #define EP_SET_EE(x, ee) ((x) = ((x) & ~EP_EE_MASK) | (ee)) #define EP_ST_MASK 0x4 #define EP_ST_DISABLE 0x0 #define EP_ST_ENABLE 0x4 #define EP_GET_ST(x) (x & EP_ST_MASK) #define EP_SET_ST(x, ee) ((x) = ((x) & ~EP_ST_MASK) | (ee)) #define EP_EXE_MASK 0x8 #define NON_EXECUTABLE 0x0 #define EXECUTABLE 0x8 #define EP_GET_EXE(x) (x & EP_EXE_MASK) #define EP_SET_EXE(x, ee) ((x) = ((x) & ~EP_EXE_MASK) | (ee)) #define EP_FIRST_EXE_MASK 0x10 #define EP_FIRST_EXE 0x10 #define EP_GET_FIRST_EXE(x) ((x) & EP_FIRST_EXE_MASK) #define EP_SET_FIRST_EXE(x, ee) ((x) = ((x) & ~EP_FIRST_EXE_MASK) | (ee)) #define PARAM_EP 0x01 #define PARAM_IMAGE_BINARY 0x02 #define PARAM_BL31 0x03 #define PARAM_BL_LOAD_INFO 0x04 #define PARAM_BL_PARAMS 0x05 #define PARAM_PSCI_LIB_ARGS 0x06 #define IMAGE_ATTRIB_SKIP_LOADING 0x02 #define IMAGE_ATTRIB_PLAT_SETUP 0x04 #define VERSION_1 0x01 #define VERSION_2 0x02 #define INVALID_IMAGE_ID (0xFFFFFFFF) #define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \ (_p)->h.type = (uint8_t)(_type); \ (_p)->h.version = (uint8_t)(_ver); \ (_p)->h.size = (uint16_t)sizeof(*_p); \ (_p)->h.attr = (uint32_t)(_attr) ; \ } while (0) /* Following is used for populating structure members statically. */ #define SET_STATIC_PARAM_HEAD(_p, _type, _ver, _p_type, _attr) \ ._p.h.type = (uint8_t)(_type), \ ._p.h.version = (uint8_t)(_ver), \ ._p.h.size = (uint16_t)sizeof(_p_type), \ ._p.h.attr = (uint32_t)(_attr) /******************************************************************************* * Constants to indicate type of exception to the common exception handler. ******************************************************************************/ #define SYNC_EXCEPTION_SP_EL0 0x0 #define IRQ_SP_EL0 0x1 #define FIQ_SP_EL0 0x2 #define SERROR_SP_EL0 0x3 #define SYNC_EXCEPTION_SP_ELX 0x4 #define IRQ_SP_ELX 0x5 #define FIQ_SP_ELX 0x6 #define SERROR_SP_ELX 0x7 #define SYNC_EXCEPTION_AARCH64 0x8 #define IRQ_AARCH64 0x9 #define FIQ_AARCH64 0xa #define SERROR_AARCH64 0xb #define SYNC_EXCEPTION_AARCH32 0xc #define IRQ_AARCH32 0xd #define FIQ_AARCH32 0xe #define SERROR_AARCH32 0xf #ifndef __ASSEMBLY__ #include /* For __dead2 */ #include #include #include #include #include /* To retain compatibility */ /* * Declarations of linker defined symbols to help determine memory layout of * BL images */ #if SEPARATE_CODE_AND_RODATA extern uintptr_t __TEXT_START__; extern uintptr_t __TEXT_END__; extern uintptr_t __RODATA_START__; extern uintptr_t __RODATA_END__; #else extern uintptr_t __RO_START__; extern uintptr_t __RO_END__; #endif #if IMAGE_BL2 extern uintptr_t __BL2_END__; #elif IMAGE_BL2U extern uintptr_t __BL2U_END__; #elif IMAGE_BL31 extern uintptr_t __BL31_END__; #elif IMAGE_BL32 extern uintptr_t __BL32_END__; #endif /* IMAGE_BLX */ #if USE_COHERENT_MEM extern uintptr_t __COHERENT_RAM_START__; extern uintptr_t __COHERENT_RAM_END__; #endif /******************************************************************************* * Structure used for telling the next BL how much of a particular type of * memory is available for its use and how much is already used. ******************************************************************************/ typedef struct meminfo { uintptr_t total_base; size_t total_size; #if !LOAD_IMAGE_V2 uintptr_t free_base; size_t free_size; #endif } meminfo_t; typedef struct aapcs64_params { u_register_t arg0; u_register_t arg1; u_register_t arg2; u_register_t arg3; u_register_t arg4; u_register_t arg5; u_register_t arg6; u_register_t arg7; } aapcs64_params_t; typedef struct aapcs32_params { u_register_t arg0; u_register_t arg1; u_register_t arg2; u_register_t arg3; } aapcs32_params_t; /*************************************************************************** * This structure provides version information and the size of the * structure, attributes for the structure it represents ***************************************************************************/ typedef struct param_header { uint8_t type; /* type of the structure */ uint8_t version; /* version of this structure */ uint16_t size; /* size of this structure in bytes */ uint32_t attr; /* attributes: unused bits SBZ */ } param_header_t; /***************************************************************************** * This structure represents the superset of information needed while * switching exception levels. The only two mechanisms to do so are * ERET & SMC. Security state is indicated using bit zero of header * attribute * NOTE: BL1 expects entrypoint followed by spsr at an offset from the start * of this structure defined by the macro `ENTRY_POINT_INFO_PC_OFFSET` while * processing SMC to jump to BL31. *****************************************************************************/ typedef struct entry_point_info { param_header_t h; uintptr_t pc; uint32_t spsr; #ifdef AARCH32 aapcs32_params_t args; #else aapcs64_params_t args; #endif } entry_point_info_t; /***************************************************************************** * Image info binary provides information from the image loader that * can be used by the firmware to manage available trusted RAM. * More advanced firmware image formats can provide additional * information that enables optimization or greater flexibility in the * common firmware code *****************************************************************************/ typedef struct image_info { param_header_t h; uintptr_t image_base; /* physical address of base of image */ uint32_t image_size; /* bytes read from image file */ #if LOAD_IMAGE_V2 uint32_t image_max_size; #endif } image_info_t; /***************************************************************************** * The image descriptor struct definition. *****************************************************************************/ typedef struct image_desc { /* Contains unique image id for the image. */ unsigned int image_id; /* * This member contains Image state information. * Refer IMAGE_STATE_XXX defined above. */ unsigned int state; uint32_t copied_size; /* image size copied in blocks */ image_info_t image_info; entry_point_info_t ep_info; } image_desc_t; #if LOAD_IMAGE_V2 /* BL image node in the BL image loading sequence */ typedef struct bl_load_info_node { unsigned int image_id; image_info_t *image_info; struct bl_load_info_node *next_load_info; } bl_load_info_node_t; /* BL image head node in the BL image loading sequence */ typedef struct bl_load_info { param_header_t h; bl_load_info_node_t *head; } bl_load_info_t; /* BL image node in the BL image execution sequence */ typedef struct bl_params_node { unsigned int image_id; image_info_t *image_info; entry_point_info_t *ep_info; struct bl_params_node *next_params_info; } bl_params_node_t; /* * BL image head node in the BL image execution sequence * It is also used to pass information to next BL image. */ typedef struct bl_params { param_header_t h; bl_params_node_t *head; } bl_params_t; #else /* LOAD_IMAGE_V2 */ /******************************************************************************* * This structure represents the superset of information that can be passed to * BL31 e.g. while passing control to it from BL2. The BL32 parameters will be * populated only if BL2 detects its presence. A pointer to a structure of this * type should be passed in X0 to BL31's cold boot entrypoint. * * Use of this structure and the X0 parameter is not mandatory: the BL31 * platform code can use other mechanisms to provide the necessary information * about BL32 and BL33 to the common and SPD code. * * BL31 image information is mandatory if this structure is used. If either of * the optional BL32 and BL33 image information is not provided, this is * indicated by the respective image_info pointers being zero. ******************************************************************************/ typedef struct bl31_params { param_header_t h; image_info_t *bl31_image_info; entry_point_info_t *bl32_ep_info; image_info_t *bl32_image_info; entry_point_info_t *bl33_ep_info; image_info_t *bl33_image_info; } bl31_params_t; #endif /* LOAD_IMAGE_V2 */ /* * Compile time assertions related to the 'entry_point_info' structure to * ensure that the assembler and the compiler view of the offsets of * the structure members is the same. */ CASSERT(ENTRY_POINT_INFO_PC_OFFSET == __builtin_offsetof(entry_point_info_t, pc), \ assert_BL31_pc_offset_mismatch); CASSERT(ENTRY_POINT_INFO_ARGS_OFFSET == \ __builtin_offsetof(entry_point_info_t, args), \ assert_BL31_args_offset_mismatch); CASSERT(sizeof(uintptr_t) == __builtin_offsetof(entry_point_info_t, spsr) - \ __builtin_offsetof(entry_point_info_t, pc), \ assert_entrypoint_and_spsr_should_be_adjacent); /******************************************************************************* * Function & variable prototypes ******************************************************************************/ size_t image_size(unsigned int image_id); #if LOAD_IMAGE_V2 int load_image(unsigned int image_id, image_info_t *image_data); int load_auth_image(unsigned int image_id, image_info_t *image_data); #else uintptr_t page_align(uintptr_t, unsigned); int load_image(meminfo_t *mem_layout, unsigned int image_id, uintptr_t image_base, image_info_t *image_data, entry_point_info_t *entry_point_info); int load_auth_image(meminfo_t *mem_layout, unsigned int image_id, uintptr_t image_base, image_info_t *image_data, entry_point_info_t *entry_point_info); void reserve_mem(uintptr_t *free_base, size_t *free_size, uintptr_t addr, size_t size); #endif /* LOAD_IMAGE_V2 */ extern const char build_message[]; extern const char version_string[]; void print_entry_point_info(const entry_point_info_t *ep_info); #endif /*__ASSEMBLY__*/ #endif /* __BL_COMMON_H__ */