/* * Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #include "../drivers/pwrc/fvp_pwrc.h" #include "../fvp_def.h" .globl plat_secondary_cold_boot_setup .globl plat_get_my_entrypoint .globl plat_is_my_cpu_primary .globl plat_arm_calc_core_pos .macro fvp_choose_gicmmap param1, param2, x_tmp, w_tmp, res ldr \x_tmp, =V2M_SYSREGS_BASE + V2M_SYS_ID ldr \w_tmp, [\x_tmp] ubfx \w_tmp, \w_tmp, #V2M_SYS_ID_BLD_SHIFT, #V2M_SYS_ID_BLD_LENGTH cmp \w_tmp, #BLD_GIC_VE_MMAP csel \res, \param1, \param2, eq .endm /* ----------------------------------------------------- * void plat_secondary_cold_boot_setup (void); * * This function performs any platform specific actions * needed for a secondary cpu after a cold reset e.g * mark the cpu's presence, mechanism to place it in a * holding pen etc. * TODO: Should we read the PSYS register to make sure * that the request has gone through. * ----------------------------------------------------- */ func plat_secondary_cold_boot_setup #ifndef EL3_PAYLOAD_BASE /* --------------------------------------------- * Power down this cpu. * TODO: Do we need to worry about powering the * cluster down as well here. That will need * locks which we won't have unless an elf- * loader zeroes out the zi section. * --------------------------------------------- */ mrs x0, mpidr_el1 ldr x1, =PWRC_BASE str w0, [x1, #PPOFFR_OFF] /* --------------------------------------------- * Disable GIC bypass as well * --------------------------------------------- */ /* Check for GICv3 system register access */ mrs x0, id_aa64pfr0_el1 ubfx x0, x0, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH cmp x0, #1 b.ne gicv2_bypass_disable /* Check for SRE enable */ mrs x1, ICC_SRE_EL3 tst x1, #ICC_SRE_SRE_BIT b.eq gicv2_bypass_disable mrs x2, ICC_SRE_EL3 orr x2, x2, #(ICC_SRE_DIB_BIT | ICC_SRE_DFB_BIT) msr ICC_SRE_EL3, x2 b secondary_cold_boot_wait gicv2_bypass_disable: ldr x0, =VE_GICC_BASE ldr x1, =BASE_GICC_BASE fvp_choose_gicmmap x0, x1, x2, w2, x1 mov w0, #(IRQ_BYP_DIS_GRP1 | FIQ_BYP_DIS_GRP1) orr w0, w0, #(IRQ_BYP_DIS_GRP0 | FIQ_BYP_DIS_GRP0) str w0, [x1, #GICC_CTLR] secondary_cold_boot_wait: /* --------------------------------------------- * There is no sane reason to come out of this * wfi so panic if we do. This cpu will be pow- * ered on and reset by the cpu_on pm api * --------------------------------------------- */ dsb sy wfi no_ret plat_panic_handler #else mov_imm x0, PLAT_ARM_TRUSTED_MAILBOX_BASE /* Wait until the entrypoint gets populated */ poll_mailbox: ldr x1, [x0] cbz x1, 1f br x1 1: wfe b poll_mailbox #endif /* EL3_PAYLOAD_BASE */ endfunc plat_secondary_cold_boot_setup /* --------------------------------------------------------------------- * uintptr_t plat_get_my_entrypoint (void); * * Main job of this routine is to distinguish between a cold and warm * boot. On FVP, this information can be queried from the power * controller. The Power Control SYS Status Register (PSYSR) indicates * the wake-up reason for the CPU. * * For a cold boot, return 0. * For a warm boot, read the mailbox and return the address it contains. * * TODO: PSYSR is a common register and should be * accessed using locks. Since it is not possible * to use locks immediately after a cold reset * we are relying on the fact that after a cold * reset all cpus will read the same WK field * --------------------------------------------------------------------- */ func plat_get_my_entrypoint /* --------------------------------------------------------------------- * When bit PSYSR.WK indicates either "Wake by PPONR" or "Wake by GIC * WakeRequest signal" then it is a warm boot. * --------------------------------------------------------------------- */ mrs x2, mpidr_el1 ldr x1, =PWRC_BASE str w2, [x1, #PSYSR_OFF] ldr w2, [x1, #PSYSR_OFF] ubfx w2, w2, #PSYSR_WK_SHIFT, #PSYSR_WK_WIDTH cmp w2, #WKUP_PPONR beq warm_reset cmp w2, #WKUP_GICREQ beq warm_reset /* Cold reset */ mov x0, #0 ret warm_reset: /* --------------------------------------------------------------------- * A mailbox is maintained in the trusted SRAM. It is flushed out of the * caches after every update using normal memory so it is safe to read * it here with SO attributes. * --------------------------------------------------------------------- */ mov_imm x0, PLAT_ARM_TRUSTED_MAILBOX_BASE ldr x0, [x0] cbz x0, _panic_handler ret /* --------------------------------------------------------------------- * The power controller indicates this is a warm reset but the mailbox * is empty. This should never happen! * --------------------------------------------------------------------- */ _panic_handler: no_ret plat_panic_handler endfunc plat_get_my_entrypoint /* ----------------------------------------------------- * unsigned int plat_is_my_cpu_primary (void); * * Find out whether the current cpu is the primary * cpu. * ----------------------------------------------------- */ func plat_is_my_cpu_primary mrs x0, mpidr_el1 ldr x1, =MPIDR_AFFINITY_MASK and x0, x0, x1 cmp x0, #FVP_PRIMARY_CPU cset w0, eq ret endfunc plat_is_my_cpu_primary /* --------------------------------------------------------------------- * unsigned int plat_arm_calc_core_pos(u_register_t mpidr) * * Function to calculate the core position on FVP. * * (ClusterId * FVP_MAX_CPUS_PER_CLUSTER * FVP_MAX_PE_PER_CPU) + * (CPUId * FVP_MAX_PE_PER_CPU) + * ThreadId * * which can be simplified as: * * ((ClusterId * FVP_MAX_CPUS_PER_CLUSTER + CPUId) * FVP_MAX_PE_PER_CPU) * + ThreadId * --------------------------------------------------------------------- */ func plat_arm_calc_core_pos /* * Check for MT bit in MPIDR. If not set, shift MPIDR to left to make it * look as if in a multi-threaded implementation. */ tst x0, #MPIDR_MT_MASK lsl x3, x0, #MPIDR_AFFINITY_BITS csel x3, x3, x0, eq /* Extract individual affinity fields from MPIDR */ ubfx x0, x3, #MPIDR_AFF0_SHIFT, #MPIDR_AFFINITY_BITS ubfx x1, x3, #MPIDR_AFF1_SHIFT, #MPIDR_AFFINITY_BITS ubfx x2, x3, #MPIDR_AFF2_SHIFT, #MPIDR_AFFINITY_BITS /* Compute linear position */ mov x4, #FVP_MAX_CPUS_PER_CLUSTER madd x1, x2, x4, x1 mov x5, #FVP_MAX_PE_PER_CPU madd x0, x1, x5, x0 ret endfunc plat_arm_calc_core_pos