/* * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "fvp_private.h" #include "../drivers/arm/gic/v3/gicv3_private.h" #if ARM_RECOM_STATE_ID_ENC /* * The table storing the valid idle power states. Ensure that the * array entries are populated in ascending order of state-id to * enable us to use binary search during power state validation. * The table must be terminated by a NULL entry. */ const unsigned int arm_pm_idle_states[] = { /* State-id - 0x01 */ arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_RET, ARM_PWR_LVL0, PSTATE_TYPE_STANDBY), /* State-id - 0x02 */ arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_OFF, ARM_PWR_LVL0, PSTATE_TYPE_POWERDOWN), /* State-id - 0x22 */ arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF, ARM_PWR_LVL1, PSTATE_TYPE_POWERDOWN), /* State-id - 0x222 */ arm_make_pwrstate_lvl2(ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF, ARM_PWR_LVL2, PSTATE_TYPE_POWERDOWN), 0, }; #endif /******************************************************************************* * Function which implements the common FVP specific operations to power down a * cluster in response to a CPU_OFF or CPU_SUSPEND request. ******************************************************************************/ static void fvp_cluster_pwrdwn_common(void) { uint64_t mpidr = read_mpidr_el1(); #if ENABLE_SPE_FOR_LOWER_ELS /* * On power down we need to disable statistical profiling extensions * before exiting coherency. */ spe_disable(); #endif /* Disable coherency if this cluster is to be turned off */ fvp_interconnect_disable(); /* Program the power controller to turn the cluster off */ fvp_pwrc_write_pcoffr(mpidr); } /* * Empty implementation of these hooks avoid setting the GICR_WAKER.Sleep bit * on ARM GICv3 implementations on FVP. This is required, because FVP does not * support SYSTEM_SUSPEND and it is `faked` in firmware. Hence, for wake up * from `fake` system suspend the GIC must not be powered off. */ void arm_gicv3_distif_pre_save(unsigned int rdist_proc_num) {} void arm_gicv3_distif_post_restore(unsigned int rdist_proc_num) {} static void fvp_power_domain_on_finish_common(const psci_power_state_t *target_state) { unsigned long mpidr; assert(target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_OFF); /* Get the mpidr for this cpu */ mpidr = read_mpidr_el1(); /* Perform the common cluster specific operations */ if (target_state->pwr_domain_state[ARM_PWR_LVL1] == ARM_LOCAL_STATE_OFF) { /* * This CPU might have woken up whilst the cluster was * attempting to power down. In this case the FVP power * controller will have a pending cluster power off request * which needs to be cleared by writing to the PPONR register. * This prevents the power controller from interpreting a * subsequent entry of this cpu into a simple wfi as a power * down request. */ fvp_pwrc_write_pponr(mpidr); /* Enable coherency if this cluster was off */ fvp_interconnect_enable(); } /* Perform the common system specific operations */ if (target_state->pwr_domain_state[ARM_PWR_LVL2] == ARM_LOCAL_STATE_OFF) arm_system_pwr_domain_resume(); /* * Clear PWKUPR.WEN bit to ensure interrupts do not interfere * with a cpu power down unless the bit is set again */ fvp_pwrc_clr_wen(mpidr); } /******************************************************************************* * FVP handler called when a CPU is about to enter standby. ******************************************************************************/ static void fvp_cpu_standby(plat_local_state_t cpu_state) { assert(cpu_state == ARM_LOCAL_STATE_RET); /* * Enter standby state * dsb is good practice before using wfi to enter low power states */ dsb(); wfi(); } /******************************************************************************* * FVP handler called when a power domain is about to be turned on. The * mpidr determines the CPU to be turned on. ******************************************************************************/ static int fvp_pwr_domain_on(u_register_t mpidr) { int rc = PSCI_E_SUCCESS; unsigned int psysr; /* * Ensure that we do not cancel an inflight power off request for the * target cpu. That would leave it in a zombie wfi. Wait for it to power * off and then program the power controller to turn that CPU on. */ do { psysr = fvp_pwrc_read_psysr(mpidr); } while ((psysr & PSYSR_AFF_L0) != 0U); fvp_pwrc_write_pponr(mpidr); return rc; } /******************************************************************************* * FVP handler called when a power domain is about to be turned off. The * target_state encodes the power state that each level should transition to. ******************************************************************************/ static void fvp_pwr_domain_off(const psci_power_state_t *target_state) { assert(target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_OFF); /* * If execution reaches this stage then this power domain will be * suspended. Perform at least the cpu specific actions followed * by the cluster specific operations if applicable. */ /* Prevent interrupts from spuriously waking up this cpu */ plat_arm_gic_cpuif_disable(); /* Turn redistributor off */ plat_arm_gic_redistif_off(); /* Program the power controller to power off this cpu. */ fvp_pwrc_write_ppoffr(read_mpidr_el1()); if (target_state->pwr_domain_state[ARM_PWR_LVL1] == ARM_LOCAL_STATE_OFF) fvp_cluster_pwrdwn_common(); } /******************************************************************************* * FVP handler called when a power domain is about to be suspended. The * target_state encodes the power state that each level should transition to. ******************************************************************************/ static void fvp_pwr_domain_suspend(const psci_power_state_t *target_state) { unsigned long mpidr; /* * FVP has retention only at cpu level. Just return * as nothing is to be done for retention. */ if (target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_RET) return; assert(target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_OFF); /* Get the mpidr for this cpu */ mpidr = read_mpidr_el1(); /* Program the power controller to enable wakeup interrupts. */ fvp_pwrc_set_wen(mpidr); /* Prevent interrupts from spuriously waking up this cpu */ plat_arm_gic_cpuif_disable(); /* * The Redistributor is not powered off as it can potentially prevent * wake up events reaching the CPUIF and/or might lead to losing * register context. */ /* Perform the common cluster specific operations */ if (target_state->pwr_domain_state[ARM_PWR_LVL1] == ARM_LOCAL_STATE_OFF) fvp_cluster_pwrdwn_common(); /* Perform the common system specific operations */ if (target_state->pwr_domain_state[ARM_PWR_LVL2] == ARM_LOCAL_STATE_OFF) arm_system_pwr_domain_save(); /* Program the power controller to power off this cpu. */ fvp_pwrc_write_ppoffr(read_mpidr_el1()); } /******************************************************************************* * FVP handler called when a power domain has just been powered on after * being turned off earlier. The target_state encodes the low power state that * each level has woken up from. ******************************************************************************/ static void fvp_pwr_domain_on_finish(const psci_power_state_t *target_state) { fvp_power_domain_on_finish_common(target_state); } /******************************************************************************* * FVP handler called when a power domain has just been powered on and the cpu * and its cluster are fully participating in coherent transaction on the * interconnect. Data cache must be enabled for CPU at this point. ******************************************************************************/ static void fvp_pwr_domain_on_finish_late(const psci_power_state_t *target_state) { /* Program GIC per-cpu distributor or re-distributor interface */ plat_arm_gic_pcpu_init(); /* Enable GIC CPU interface */ plat_arm_gic_cpuif_enable(); } /******************************************************************************* * FVP handler called when a power domain has just been powered on after * having been suspended earlier. The target_state encodes the low power state * that each level has woken up from. * TODO: At the moment we reuse the on finisher and reinitialize the secure * context. Need to implement a separate suspend finisher. ******************************************************************************/ static void fvp_pwr_domain_suspend_finish(const psci_power_state_t *target_state) { /* * Nothing to be done on waking up from retention from CPU level. */ if (target_state->pwr_domain_state[ARM_PWR_LVL0] == ARM_LOCAL_STATE_RET) return; fvp_power_domain_on_finish_common(target_state); /* Enable GIC CPU interface */ plat_arm_gic_cpuif_enable(); } /******************************************************************************* * FVP handlers to shutdown/reboot the system ******************************************************************************/ static void __dead2 fvp_system_off(void) { /* Write the System Configuration Control Register */ mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL, V2M_CFGCTRL_START | V2M_CFGCTRL_RW | V2M_CFGCTRL_FUNC(V2M_FUNC_SHUTDOWN)); wfi(); ERROR("FVP System Off: operation not handled.\n"); panic(); } static void __dead2 fvp_system_reset(void) { /* Write the System Configuration Control Register */ mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL, V2M_CFGCTRL_START | V2M_CFGCTRL_RW | V2M_CFGCTRL_FUNC(V2M_FUNC_REBOOT)); wfi(); ERROR("FVP System Reset: operation not handled.\n"); panic(); } static int fvp_node_hw_state(u_register_t target_cpu, unsigned int power_level) { unsigned int psysr; int ret; /* * The format of 'power_level' is implementation-defined, but 0 must * mean a CPU. We also allow 1 to denote the cluster */ if ((power_level != ARM_PWR_LVL0) && (power_level != ARM_PWR_LVL1)) return PSCI_E_INVALID_PARAMS; /* * Read the status of the given MPDIR from FVP power controller. The * power controller only gives us on/off status, so map that to expected * return values of the PSCI call */ psysr = fvp_pwrc_read_psysr(target_cpu); if (psysr == PSYSR_INVALID) return PSCI_E_INVALID_PARAMS; if (power_level == ARM_PWR_LVL0) { ret = ((psysr & PSYSR_AFF_L0) != 0U) ? HW_ON : HW_OFF; } else { /* power_level == ARM_PWR_LVL1 */ ret = ((psysr & PSYSR_AFF_L1) != 0U) ? HW_ON : HW_OFF; } return ret; } /* * The FVP doesn't truly support power management at SYSTEM power domain. The * SYSTEM_SUSPEND will be down-graded to the cluster level within the platform * layer. The `fake` SYSTEM_SUSPEND allows us to validate some of the driver * save and restore sequences on FVP. */ #if !ARM_BL31_IN_DRAM static void fvp_get_sys_suspend_power_state(psci_power_state_t *req_state) { unsigned int i; for (i = ARM_PWR_LVL0; i <= PLAT_MAX_PWR_LVL; i++) req_state->pwr_domain_state[i] = ARM_LOCAL_STATE_OFF; } #endif /******************************************************************************* * Handler to filter PSCI requests. ******************************************************************************/ /* * The system power domain suspend is only supported only via * PSCI SYSTEM_SUSPEND API. PSCI CPU_SUSPEND request to system power domain * will be downgraded to the lower level. */ static int fvp_validate_power_state(unsigned int power_state, psci_power_state_t *req_state) { int rc; rc = arm_validate_power_state(power_state, req_state); /* * Ensure that the system power domain level is never suspended * via PSCI CPU SUSPEND API. Currently system suspend is only * supported via PSCI SYSTEM SUSPEND API. */ req_state->pwr_domain_state[ARM_PWR_LVL2] = ARM_LOCAL_STATE_RUN; return rc; } /* * Custom `translate_power_state_by_mpidr` handler for FVP. Unlike in the * `fvp_validate_power_state`, we do not downgrade the system power * domain level request in `power_state` as it will be used to query the * PSCI_STAT_COUNT/RESIDENCY at the system power domain level. */ static int fvp_translate_power_state_by_mpidr(u_register_t mpidr, unsigned int power_state, psci_power_state_t *output_state) { return arm_validate_power_state(power_state, output_state); } /******************************************************************************* * Export the platform handlers via plat_arm_psci_pm_ops. The ARM Standard * platform layer will take care of registering the handlers with PSCI. ******************************************************************************/ plat_psci_ops_t plat_arm_psci_pm_ops = { .cpu_standby = fvp_cpu_standby, .pwr_domain_on = fvp_pwr_domain_on, .pwr_domain_off = fvp_pwr_domain_off, .pwr_domain_suspend = fvp_pwr_domain_suspend, .pwr_domain_on_finish = fvp_pwr_domain_on_finish, .pwr_domain_on_finish_late = fvp_pwr_domain_on_finish_late, .pwr_domain_suspend_finish = fvp_pwr_domain_suspend_finish, .system_off = fvp_system_off, .system_reset = fvp_system_reset, .validate_power_state = fvp_validate_power_state, .validate_ns_entrypoint = arm_validate_psci_entrypoint, .translate_power_state_by_mpidr = fvp_translate_power_state_by_mpidr, .get_node_hw_state = fvp_node_hw_state, #if !ARM_BL31_IN_DRAM /* * The TrustZone Controller is set up during the warmboot sequence after * resuming the CPU from a SYSTEM_SUSPEND. If BL31 is located in SRAM * this is not a problem but, if it is in TZC-secured DRAM, it tries to * reconfigure the same memory it is running on, causing an exception. */ .get_sys_suspend_power_state = fvp_get_sys_suspend_power_state, #endif .mem_protect_chk = arm_psci_mem_protect_chk, .read_mem_protect = arm_psci_read_mem_protect, .write_mem_protect = arm_nor_psci_write_mem_protect, }; const plat_psci_ops_t *plat_arm_psci_override_pm_ops(plat_psci_ops_t *ops) { return ops; }