/* * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of ARM nor the names of its contributors may be used * to endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef __FVP_DEF_H__ #define __FVP_DEF_H__ /* Firmware Image Package */ #define FIP_IMAGE_NAME "fip.bin" #define FVP_PRIMARY_CPU 0x0 /* Memory location options for Shared data and TSP in FVP */ #define FVP_IN_TRUSTED_SRAM 0 #define FVP_IN_TRUSTED_DRAM 1 /******************************************************************************* * FVP memory map related constants ******************************************************************************/ #define FVP_TRUSTED_ROM_BASE 0x00000000 #define FVP_TRUSTED_ROM_SIZE 0x04000000 /* 64 MB */ #define FVP_TRUSTED_SRAM_BASE 0x04000000 #define FVP_TRUSTED_SRAM_SIZE 0x00040000 /* 256 KB */ #define FVP_TRUSTED_DRAM_BASE 0x06000000 #define FVP_TRUSTED_DRAM_SIZE 0x02000000 /* 32 MB */ #define FLASH0_BASE 0x08000000 #define FLASH0_SIZE 0x04000000 #define FLASH1_BASE 0x0c000000 #define FLASH1_SIZE 0x04000000 #define PSRAM_BASE 0x14000000 #define PSRAM_SIZE 0x04000000 #define VRAM_BASE 0x18000000 #define VRAM_SIZE 0x02000000 /* Aggregate of all devices in the first GB */ #define DEVICE0_BASE 0x1a000000 #define DEVICE0_SIZE 0x12200000 #define DEVICE1_BASE 0x2f000000 #define DEVICE1_SIZE 0x200000 #define NSRAM_BASE 0x2e000000 #define NSRAM_SIZE 0x10000 /* 4KB shared memory */ #define FVP_SHARED_RAM_SIZE 0x1000 /* Location of shared memory */ #if (FVP_SHARED_DATA_LOCATION_ID == FVP_IN_TRUSTED_DRAM) /* Shared memory at the base of Trusted DRAM */ # define FVP_SHARED_RAM_BASE FVP_TRUSTED_DRAM_BASE # define FVP_TRUSTED_SRAM_LIMIT (FVP_TRUSTED_SRAM_BASE \ + FVP_TRUSTED_SRAM_SIZE) #elif (FVP_SHARED_DATA_LOCATION_ID == FVP_IN_TRUSTED_SRAM) # if (FVP_TSP_RAM_LOCATION_ID == FVP_IN_TRUSTED_DRAM) # error "Shared data in Trusted SRAM and TSP in Trusted DRAM is not supported" # endif /* Shared memory at the top of the Trusted SRAM */ # define FVP_SHARED_RAM_BASE (FVP_TRUSTED_SRAM_BASE \ + FVP_TRUSTED_SRAM_SIZE \ - FVP_SHARED_RAM_SIZE) # define FVP_TRUSTED_SRAM_LIMIT FVP_SHARED_RAM_BASE #else # error "Unsupported FVP_SHARED_DATA_LOCATION_ID value" #endif #define DRAM1_BASE 0x80000000ull #define DRAM1_SIZE 0x80000000ull #define DRAM1_END (DRAM1_BASE + DRAM1_SIZE - 1) #define DRAM1_SEC_SIZE 0x01000000ull #define DRAM_BASE DRAM1_BASE #define DRAM_SIZE DRAM1_SIZE #define DRAM2_BASE 0x880000000ull #define DRAM2_SIZE 0x780000000ull #define DRAM2_END (DRAM2_BASE + DRAM2_SIZE - 1) #define PCIE_EXP_BASE 0x40000000 #define TZRNG_BASE 0x7fe60000 #define TZNVCTR_BASE 0x7fe70000 #define TZROOTKEY_BASE 0x7fe80000 /* Memory mapped Generic timer interfaces */ #define SYS_CNTCTL_BASE 0x2a430000 #define SYS_CNTREAD_BASE 0x2a800000 #define SYS_TIMCTL_BASE 0x2a810000 /* V2M motherboard system registers & offsets */ #define VE_SYSREGS_BASE 0x1c010000 #define V2M_SYS_ID 0x0 #define V2M_SYS_SWITCH 0x4 #define V2M_SYS_LED 0x8 #define V2M_SYS_CFGDATA 0xa0 #define V2M_SYS_CFGCTRL 0xa4 #define V2M_SYS_CFGSTATUS 0xa8 #define CFGCTRL_START (1 << 31) #define CFGCTRL_RW (1 << 30) #define CFGCTRL_FUNC_SHIFT 20 #define CFGCTRL_FUNC(fn) (fn << CFGCTRL_FUNC_SHIFT) #define FUNC_CLK_GEN 0x01 #define FUNC_TEMP 0x04 #define FUNC_DB_RESET 0x05 #define FUNC_SCC_CFG 0x06 #define FUNC_SHUTDOWN 0x08 #define FUNC_REBOOT 0x09 /* Load address of BL33 in the FVP port */ #define NS_IMAGE_OFFSET (DRAM1_BASE + 0x8000000) /* DRAM + 128MB */ /* Special value used to verify platform parameters from BL2 to BL3-1 */ #define FVP_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL /* * V2M sysled bit definitions. The values written to this * register are defined in arch.h & runtime_svc.h. Only * used by the primary cpu to diagnose any cold boot issues. * * SYS_LED[0] - Security state (S=0/NS=1) * SYS_LED[2:1] - Exception Level (EL3-EL0) * SYS_LED[7:3] - Exception Class (Sync/Async & origin) * */ #define SYS_LED_SS_SHIFT 0x0 #define SYS_LED_EL_SHIFT 0x1 #define SYS_LED_EC_SHIFT 0x3 #define SYS_LED_SS_MASK 0x1 #define SYS_LED_EL_MASK 0x3 #define SYS_LED_EC_MASK 0x1f /* V2M sysid register bits */ #define SYS_ID_REV_SHIFT 28 #define SYS_ID_HBI_SHIFT 16 #define SYS_ID_BLD_SHIFT 12 #define SYS_ID_ARCH_SHIFT 8 #define SYS_ID_FPGA_SHIFT 0 #define SYS_ID_REV_MASK 0xf #define SYS_ID_HBI_MASK 0xfff #define SYS_ID_BLD_MASK 0xf #define SYS_ID_ARCH_MASK 0xf #define SYS_ID_FPGA_MASK 0xff #define SYS_ID_BLD_LENGTH 4 #define HBI_FVP_BASE 0x020 #define REV_FVP_BASE_V0 0x0 #define HBI_FOUNDATION 0x010 #define REV_FOUNDATION_V2_0 0x0 #define REV_FOUNDATION_V2_1 0x1 #define BLD_GIC_VE_MMAP 0x0 #define BLD_GIC_A53A57_MMAP 0x1 #define ARCH_MODEL 0x1 /* FVP Power controller base address*/ #define PWRC_BASE 0x1c100000 /******************************************************************************* * CCI-400 related constants ******************************************************************************/ #define CCI400_BASE 0x2c090000 #define CCI400_SL_IFACE3_CLUSTER_IX 0 #define CCI400_SL_IFACE4_CLUSTER_IX 1 /******************************************************************************* * GIC-400 & interrupt handling related constants ******************************************************************************/ /* VE compatible GIC memory map */ #define VE_GICD_BASE 0x2c001000 #define VE_GICC_BASE 0x2c002000 #define VE_GICH_BASE 0x2c004000 #define VE_GICV_BASE 0x2c006000 /* Base FVP compatible GIC memory map */ #define BASE_GICD_BASE 0x2f000000 #define BASE_GICR_BASE 0x2f100000 #define BASE_GICC_BASE 0x2c000000 #define BASE_GICH_BASE 0x2c010000 #define BASE_GICV_BASE 0x2c02f000 #define IRQ_TZ_WDOG 56 #define IRQ_SEC_PHY_TIMER 29 #define IRQ_SEC_SGI_0 8 #define IRQ_SEC_SGI_1 9 #define IRQ_SEC_SGI_2 10 #define IRQ_SEC_SGI_3 11 #define IRQ_SEC_SGI_4 12 #define IRQ_SEC_SGI_5 13 #define IRQ_SEC_SGI_6 14 #define IRQ_SEC_SGI_7 15 #define IRQ_SEC_SGI_8 16 /******************************************************************************* * PL011 related constants ******************************************************************************/ #define PL011_UART0_BASE 0x1c090000 #define PL011_UART1_BASE 0x1c0a0000 #define PL011_UART2_BASE 0x1c0b0000 #define PL011_UART3_BASE 0x1c0c0000 #define PL011_BAUDRATE 115200 #define PL011_UART0_CLK_IN_HZ 24000000 #define PL011_UART1_CLK_IN_HZ 24000000 #define PL011_UART2_CLK_IN_HZ 24000000 #define PL011_UART3_CLK_IN_HZ 24000000 /******************************************************************************* * TrustZone address space controller related constants ******************************************************************************/ #define TZC400_BASE 0x2a4a0000 /* * The NSAIDs for this platform as used to program the TZC400. */ /* NSAIDs used by devices in TZC filter 0 on FVP */ #define FVP_NSAID_DEFAULT 0 #define FVP_NSAID_PCI 1 #define FVP_NSAID_VIRTIO 8 /* from FVP v5.6 onwards */ #define FVP_NSAID_AP 9 /* Application Processors */ #define FVP_NSAID_VIRTIO_OLD 15 /* until FVP v5.5 */ /* NSAIDs used by devices in TZC filter 2 on FVP */ #define FVP_NSAID_HDLCD0 2 #define FVP_NSAID_CLCD 7 /******************************************************************************* * Shared Data ******************************************************************************/ /* Entrypoint mailboxes */ #define MBOX_BASE FVP_SHARED_RAM_BASE #define MBOX_SIZE 0x200 /* Base address where parameters to BL31 are stored */ #define PARAMS_BASE (MBOX_BASE + MBOX_SIZE) #endif /* __FVP_DEF_H__ */