/* * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include #include .globl flush_dcache_range .globl clean_dcache_range .globl inv_dcache_range .globl dcsw_op_louis .globl dcsw_op_all .globl dcsw_op_level1 .globl dcsw_op_level2 .globl dcsw_op_level3 /* * This macro can be used for implementing various data cache operations `op` */ .macro do_dcache_maintenance_by_mva op /* Exit early if size is zero */ cbz x1, exit_loop_\op dcache_line_size x2, x3 add x1, x0, x1 sub x3, x2, #1 bic x0, x0, x3 loop_\op: dc \op, x0 add x0, x0, x2 cmp x0, x1 b.lo loop_\op dsb sy exit_loop_\op: ret .endm /* ------------------------------------------ * Clean+Invalidate from base address till * size. 'x0' = addr, 'x1' = size * ------------------------------------------ */ func flush_dcache_range do_dcache_maintenance_by_mva civac endfunc flush_dcache_range /* ------------------------------------------ * Clean from base address till size. * 'x0' = addr, 'x1' = size * ------------------------------------------ */ func clean_dcache_range do_dcache_maintenance_by_mva cvac endfunc clean_dcache_range /* ------------------------------------------ * Invalidate from base address till * size. 'x0' = addr, 'x1' = size * ------------------------------------------ */ func inv_dcache_range do_dcache_maintenance_by_mva ivac endfunc inv_dcache_range /* --------------------------------------------------------------- * Data cache operations by set/way to the level specified * * The main function, do_dcsw_op requires: * x0: The operation type (0-2), as defined in arch.h * x3: The last cache level to operate on * x9: clidr_el1 * x10: The cache level to begin operation from * and will carry out the operation on each data cache from level 0 * to the level in x3 in sequence * * The dcsw_op macro sets up the x3 and x9 parameters based on * clidr_el1 cache information before invoking the main function * --------------------------------------------------------------- */ .macro dcsw_op shift, fw, ls mrs x9, clidr_el1 ubfx x3, x9, \shift, \fw lsl x3, x3, \ls mov x10, xzr b do_dcsw_op .endm func do_dcsw_op cbz x3, exit adr x14, dcsw_loop_table // compute inner loop address add x14, x14, x0, lsl #5 // inner loop is 8x32-bit instructions #if ENABLE_BTI add x14, x14, x0, lsl #2 // inner loop is + "bti j" instruction #endif mov x0, x9 mov w8, #1 loop1: add x2, x10, x10, lsr #1 // work out 3x current cache level lsr x1, x0, x2 // extract cache type bits from clidr and x1, x1, #7 // mask the bits for current cache only cmp x1, #2 // see what cache we have at this level b.lo level_done // nothing to do if no cache or icache msr csselr_el1, x10 // select current cache level in csselr isb // isb to sych the new cssr&csidr mrs x1, ccsidr_el1 // read the new ccsidr and x2, x1, #7 // extract the length of the cache lines add x2, x2, #4 // add 4 (line length offset) ubfx x4, x1, #3, #10 // maximum way number clz w5, w4 // bit position of way size increment lsl w9, w4, w5 // w9 = aligned max way number lsl w16, w8, w5 // w16 = way number loop decrement orr w9, w10, w9 // w9 = combine way and cache number ubfx w6, w1, #13, #15 // w6 = max set number lsl w17, w8, w2 // w17 = set number loop decrement dsb sy // barrier before we start this level br x14 // jump to DC operation specific loop .macro dcsw_loop _op #if ENABLE_BTI bti j #endif loop2_\_op: lsl w7, w6, w2 // w7 = aligned max set number loop3_\_op: orr w11, w9, w7 // combine cache, way and set number dc \_op, x11 subs w7, w7, w17 // decrement set number b.hs loop3_\_op subs x9, x9, x16 // decrement way number b.hs loop2_\_op b level_done .endm level_done: add x10, x10, #2 // increment cache number cmp x3, x10 b.hi loop1 msr csselr_el1, xzr // select cache level 0 in csselr dsb sy // barrier to complete final cache operation isb exit: ret endfunc do_dcsw_op dcsw_loop_table: dcsw_loop isw dcsw_loop cisw dcsw_loop csw func dcsw_op_louis dcsw_op #LOUIS_SHIFT, #CLIDR_FIELD_WIDTH, #LEVEL_SHIFT endfunc dcsw_op_louis func dcsw_op_all dcsw_op #LOC_SHIFT, #CLIDR_FIELD_WIDTH, #LEVEL_SHIFT endfunc dcsw_op_all /* --------------------------------------------------------------- * Helper macro for data cache operations by set/way for the * level specified * --------------------------------------------------------------- */ .macro dcsw_op_level level mrs x9, clidr_el1 mov x3, \level sub x10, x3, #2 b do_dcsw_op .endm /* --------------------------------------------------------------- * Data cache operations by set/way for level 1 cache * * The main function, do_dcsw_op requires: * x0: The operation type (0-2), as defined in arch.h * --------------------------------------------------------------- */ func dcsw_op_level1 dcsw_op_level #(1 << LEVEL_SHIFT) endfunc dcsw_op_level1 /* --------------------------------------------------------------- * Data cache operations by set/way for level 2 cache * * The main function, do_dcsw_op requires: * x0: The operation type (0-2), as defined in arch.h * --------------------------------------------------------------- */ func dcsw_op_level2 dcsw_op_level #(2 << LEVEL_SHIFT) endfunc dcsw_op_level2 /* --------------------------------------------------------------- * Data cache operations by set/way for level 3 cache * * The main function, do_dcsw_op requires: * x0: The operation type (0-2), as defined in arch.h * --------------------------------------------------------------- */ func dcsw_op_level3 dcsw_op_level #(3 << LEVEL_SHIFT) endfunc dcsw_op_level3