arm-trusted-firmware/plat/nxp/soc-lx2160a/include/soc.h

142 lines
3.8 KiB
C

/*
* Copyright 2018-2021 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*
*/
#ifndef _SOC_H
#define _SOC_H
/* Chassis specific defines - common across SoC's of a particular platform */
#include <dcfg_lsch3.h>
#include <soc_default_base_addr.h>
#include <soc_default_helper_macros.h>
#define NUM_DRAM_REGIONS 3
#define NXP_DRAM0_ADDR 0x80000000
#define NXP_DRAM0_MAX_SIZE 0x80000000 /* 2 GB */
#define NXP_DRAM1_ADDR 0x2080000000
#define NXP_DRAM1_MAX_SIZE 0x1F80000000 /* 126 G */
#define NXP_DRAM2_ADDR 0x6000000000
#define NXP_DRAM2_MAX_SIZE 0x2000000000 /* 128G */
/*DRAM0 Size defined in platform_def.h */
#define NXP_DRAM0_SIZE PLAT_DEF_DRAM0_SIZE
#define DDR_PLL_FIX
#define NXP_DDR_PHY1_ADDR 0x01400000
#define NXP_DDR_PHY2_ADDR 0x01600000
#if defined(IMAGE_BL31)
#define LS_SYS_TIMCTL_BASE 0x2890000
#ifdef LS_SYS_TIMCTL_BASE
#define PLAT_LS_NSTIMER_FRAME_ID 0
#define LS_CONFIG_CNTACR 1
#endif
#endif
/* Start: Macros used by soc.c: get_boot_dev */
#define PORSR1_RCW_MASK 0x07800000
#define PORSR1_RCW_SHIFT 23
#define SDHC1_VAL 0x8
#define SDHC2_VAL 0x9
#define I2C1_VAL 0xa
#define FLEXSPI_NAND2K_VAL 0xc
#define FLEXSPI_NAND4K_VAL 0xd
#define FLEXSPI_NOR 0xf
/* End: Macros used by soc.c: get_boot_dev */
/* SVR Definition (not include major and minor rev) */
#define SVR_LX2160A 0x873601
#define SVR_LX2120A 0x873621
#define SVR_LX2080A 0x873603
/* Number of cores in platform */
/* Used by common code for array initialization */
#define NUMBER_OF_CLUSTERS 8
#define CORES_PER_CLUSTER 2
#define PLATFORM_CORE_COUNT NUMBER_OF_CLUSTERS * CORES_PER_CLUSTER
/*
* Required LS standard platform porting definitions
* for CCN-508
*/
#define PLAT_CLUSTER_TO_CCN_ID_MAP 11, 15, 27, 31, 12, 28, 16, 0
#define PLAT_6CLUSTER_TO_CCN_ID_MAP 11, 15, 27, 31, 12, 28
/* Defines required for using XLAT tables from ARM common code */
#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 40)
#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 40)
/* Clock Divisors */
#define NXP_PLATFORM_CLK_DIVIDER 2
#define NXP_UART_CLK_DIVIDER 4
/* Start: Macros used by lx2160a.S */
#define MPIDR_AFFINITY0_MASK 0x00FF
#define MPIDR_AFFINITY1_MASK 0xFF00
#define CPUECTLR_DISABLE_TWALK_PREFETCH 0x4000000000
#define CPUECTLR_INS_PREFETCH_MASK 0x1800000000
#define CPUECTLR_DAT_PREFETCH_MASK 0x0300000000
#define CPUECTLR_RET_8CLK 0x2
#define OSDLR_EL1_DLK_LOCK 0x1
#define CNTP_CTL_EL0_EN 0x1
#define CNTP_CTL_EL0_IMASK 0x2
/* set to 0 if the clusters are not symmetrical */
#define SYMMETRICAL_CLUSTERS 1
/* End: Macros used by lx2160a.S */
/* Start: Macros used by lib/psci files */
#define SYSTEM_PWR_DOMAINS 1
#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CORE_COUNT + \
NUMBER_OF_CLUSTERS + \
SYSTEM_PWR_DOMAINS)
/* Power state coordination occurs at the system level */
#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL2
/* define retention state */
#define PLAT_MAX_RET_STATE (PSCI_LOCAL_STATE_RUN + 1)
/* define power-down state */
#define PLAT_MAX_OFF_STATE (PLAT_MAX_RET_STATE + 1)
/* End: Macros used by lib/psci files */
/* Some data must be aligned on the biggest cache line size in the platform.
* This is known only to the platform as it might have a combination of
* integrated and external caches.
*
* CACHE_WRITEBACK_GRANULE is defined in soc.def
*
* One cache line needed for bakery locks on ARM platforms
*/
#define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE)
#ifndef WDOG_RESET_FLAG
#define WDOG_RESET_FLAG DEFAULT_SET_VALUE
#endif
#ifndef WARM_BOOT_SUCCESS
#define WARM_BOOT_SUCCESS DEFAULT_SET_VALUE
#endif
#ifndef __ASSEMBLER__
void set_base_freq_CNTFID0(void);
void soc_init_start(void);
void soc_init_finish(void);
void soc_init_percpu(void);
void _soc_set_start_addr(unsigned long addr);
void _set_platform_security(void);
#endif
#endif /* _SOC_H */