arm-trusted-firmware/plat/mediatek/mt8183/drivers/mcsi/mcsi.h

117 lines
3.2 KiB
C

/*
* Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef MCSI_H
#define MCSI_H
#define SLAVE_IFACE7_OFFSET 0x1700
#define SLAVE_IFACE6_OFFSET 0x1600
#define SLAVE_IFACE5_OFFSET 0x1500
#define SLAVE_IFACE4_OFFSET 0x1400
#define SLAVE_IFACE3_OFFSET 0x1300
#define SLAVE_IFACE2_OFFSET 0x1200
#define SLAVE_IFACE1_OFFSET 0x1100
#define SLAVE_IFACE0_OFFSET 0x1000
#define SLAVE_IFACE_OFFSET(index) (SLAVE_IFACE0_OFFSET + \
(0x100 * (index)))
/* Control and ID register offsets */
#define CENTRAL_CTRL_REG 0x0
#define ERR_FLAG_REG 0x4
#define SF_INIT_REG 0x10
#define SF_CTRL_REG 0x14
#define DCM_CTRL_REG 0x18
#define ERR_FLAG2_REG 0x20
#define SNP_PENDING_REG 0x28
#define ACP_PENDING_REG 0x2c
#define FLUSH_SF 0x500
#define SYS_CCE_CTRL 0x2000
#define MST1_CTRL 0x2100
#define MTS2_CTRL 0x2200
#define XBAR_ARAW_ARB 0x3000
#define XBAR_R_ARB 0x3004
/* Slave interface register offsets */
#define SNOOP_CTRL_REG 0x0
#define QOS_CTRL_REG 0x4
#define QOS_OVERRIDE_REG 0x8
#define QOS_TARGET_REG 0xc
#define BD_CTRL_REG 0x40
/* Snoop Control register bit definitions */
#define DVM_SUPPORT (1U << 31)
#define SNP_SUPPORT (1 << 30)
#define SHAREABLE_OVWRT (1 << 2)
#define DVM_EN_BIT (1 << 1)
#define SNOOP_EN_BIT (1 << 0)
#define SF2_INIT_DONE (1 << 17)
#define SF1_INIT_DONE (1 << 16)
#define TRIG_SF2_INIT (1 << 1)
#define TRIG_SF1_INIT (1 << 0)
/* Status register bit definitions */
#define SNP_PENDING 31
/* Status bit */
#define NS_ACC 1
#define S_ACC 0
/* Central control register bit definitions */
#define PMU_SECURE_ACC_EN (1 << 4)
#define INT_EN (1 << 3)
#define SECURE_ACC_EN (1 << 2)
#define DVM_DIS (1 << 1)
#define SNOOP_DIS (1 << 0)
#define MSCI_MEMORY_SZ (0x10000)
#define MCSI_REG_ACCESS_READ (0x0)
#define MCSI_REG_ACCESS_WRITE (0x1)
#define MCSI_REG_ACCESS_SET_BITMASK (0x2)
#define MCSI_REG_ACCESS_CLEAR_BITMASK (0x3)
#define NR_MAX_SLV (7)
/* ICCS */
#define CACHE_INSTR_EN (1 << 2)
#define IDLE_CACHE (1 << 3)
#define USE_SHARED_CACHE (1 << 4)
#define CACHE_SHARED_PRE_EN (1 << 5)
#define CACHE_SHARED_POST_EN (1 << 6)
#define ACP_PENDING_MASK (0x1007f)
#define CCI_CLK_CTRL (MCUCFG_BASE + 0x660)
#ifndef __ASSEMBLER__
#include <plat/common/common_def.h>
#include <stdint.h>
/* Function declarations */
/*
* The MCSI driver must be initialized with the base address of the
* MCSI device in the platform memory map, and the cluster indices for
* the MCSI slave interfaces 3 and 4 respectively. These are the fully
* coherent ACE slave interfaces of MCSI.
* The cluster indices must either be 0 or 1, corresponding to the level 1
* affinity instance of the mpidr representing the cluster. A negative cluster
* index indicates that no cluster is present on that slave interface.
*/
void mcsi_init(unsigned long cci_base,
unsigned int num_cci_masters);
void mcsi_cache_flush(void);
void cci_enable_cluster_coherency(unsigned long mpidr);
void cci_disable_cluster_coherency(unsigned long mpidr);
void cci_secure_switch(unsigned int ns);
void cci_init_sf(void);
unsigned long cci_reg_access(unsigned int op, unsigned long offset, unsigned long val);
#endif /* __ASSEMBLER__ */
#endif /* MCSI_H */