{1,i18nc("SMART attr name","Read Error Rate"),i18nc("SMART attr description","Rate of hardware read errors while reading data from the disk surface.")},
{2,i18nc("SMART attr name","Throughput Performance"),i18nc("SMART attr description","Overall (general) throughput performance of a hard disk drive. If the value of this attribute is decreasing there is a high probability that there is a problem with the disk.")},
{3,i18nc("SMART attr name","Spin-Up Time"),i18nc("SMART attr description","Average time of spindle spin up from zero RPM to fully operational.")},
{5,i18nc("SMART attr name","Reallocated Sectors Count"),i18nc("SMART attr description","Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area).")},
{6,i18nc("SMART attr name","Read Channel Margin"),i18nc("SMART attr description","Margin of a channel while reading data. The function of this attribute is not specified.")},
{7,i18nc("SMART attr name","Seek Error Rate"),i18nc("SMART attr description","Rate of seek errors of the magnetic heads. If there is a partial failure in the mechanical positioning system, then seek errors will arise.")},
{8,i18nc("SMART attr name","Seek Time Performance"),i18nc("SMART attr description","Average performance of seek operations of the magnetic heads. If this attribute is decreasing, it is a sign of problems in the mechanical subsystem.")},
{9,i18nc("SMART attr name","Power-On Hours"),i18nc("SMART attr description","Count of hours in power-on state.")},
{10,i18nc("SMART attr name","Spin Retry Count"),i18nc("SMART attr description","Count of retry of spin start attempts if the first attempt was unsuccessful. An increase of this attribute value is a sign of problems in the hard disk mechanical subsystem.")},
{11,i18nc("SMART attr name","Recalibration Retries"),i18nc("SMART attr description","Count of recalibrations requested if the first attempt was unsuccessful. An increase of this attribute value is a sign of problems in the hard disk mechanical subsystem.")},
{12,i18nc("SMART attr name","Power Cycle Count"),i18nc("SMART attr description","Count of full hard disk power on/off cycles.")},
{13,i18nc("SMART attr name","Soft Read Error Rate"),i18nc("SMART attr description","Uncorrected read errors reported to the operating system.")},
{170,i18nc("SMART attr name","SSD Available Reserved Space"),i18nc("SMART attr description","Number of available reserved space as a percentage of reserved space.")},
{171,i18nc("SMART attr name","SSD Program Fail Count"),i18nc("SMART attr description","Number of flash program operation failures since the drive was deployed.")},
{172,i18nc("SMART attr name","SSD Erase Fail Count"),i18nc("SMART attr description","Number of flash erase operation failures since the drive was deployed.")},
{173,i18nc("SMART attr name","SSD Wear Leveling Count"),i18nc("SMART attr description","Counts the maximum worst erase count on any block.")},
{174,i18nc("SMART attr name","SSD Unexpected power loss count"),i18nc("SMART attr description","Number of shutdowns without STANDBY IMMEDIATE as the last command (regardless of PLI activity using capacitor power). Normalized value is always 100.")},
{175,i18nc("SMART attr name","SSD Power Loss Protection Failure"),i18nc("SMART attr description","Last test result, saturated at its maximum value. Bytes 0-1: last test result as microseconds to discharge cap in range [25, 5000000], lower indicates specific error code. Bytes 2-3: minutes since last test. Bytes 4-5: lifetime number of tests. Normalized value is set to 1 on test failure or 11 if the capacitor has been tested in an excessive temperature condition, otherwise 100.")},
{181,i18nc("SMART attr name","SSD Program Fail Count Total or Non-4K Aligned Access Count"),i18nc("SMART attr description","Number of flash program operation failures since the drive was deployed.")},
{183,i18nc("SMART attr name","SATA Downshift Error Count"),i18nc("SMART attr description","Western Digital and Samsung attribute.")},
{184,i18nc("SMART attr name","End-to-End Error"),i18nc("SMART attr description","Part of HP's SMART IV technology: After transferring through the cache RAM data buffer the parity data between the host and the hard drive did not match.")},
{185,i18nc("SMART attr name","Head Stability"),i18nc("SMART attr description","Western Digital attribute.")},
{186,i18nc("SMART attr name","Induced Op-Vibration Detection"),i18nc("SMART attr description","Western Digital attribute.")},
{187,i18nc("SMART attr name","Reported Uncorrectable Errors"),i18nc("SMART attr description","Count of errors that could not be recovered using hardware ECC.")},
{188,i18nc("SMART attr name","Command Timeout"),i18nc("SMART attr description","Count of aborted operations due to HDD timeout.")},
{190,i18nc("SMART attr name","Temperature Difference From 100"),i18nc("SMART attr description","Value is equal to (100 – temp. °C), allowing manufacturer to set a minimum threshold which corresponds to a maximum temperature.")},
{191,i18nc("SMART attr name","G-sense Error Rate"),i18nc("SMART attr description","Count of errors resulting from externally-induced shock and vibration.")},
{192,i18nc("SMART attr name","Power Off Retract Count"),i18nc("SMART attr description","Count of power-off or emergency retract cycles")},
{193,i18nc("SMART attr name","Load Cycle Count"),i18nc("SMART attr description","Count of load/unload cycles into head landing zone position.")},
{195,i18nc("SMART attr name","Hardware ECC Recovered"),i18nc("SMART attr description","Count of errors that could be recovered using hardware ECC.")},
{196,i18nc("SMART attr name","Reallocation Event Count"),i18nc("SMART attr description","Count of remap operations. The raw value of this attribute shows the total number of attempts to transfer data from reallocated sectors to a spare area.")},
{197,i18nc("SMART attr name","Current Pending Sector Count"),i18nc("SMART attr description","Number of "unstable" sectors (waiting to be remapped, because of read errors).")},
{198,i18nc("SMART attr name","Uncorrectable Sector Count"),i18nc("SMART attr description","Count of uncorrectable errors when reading/writing a sector.")},
{199,i18nc("SMART attr name","UltraDMA CRC Error Count"),i18nc("SMART attr description","Count of errors in data transfer via the interface cable as determined by ICRC.")},
{200,i18nc("SMART attr name","Multi-Zone Error Rate<br/>Write Error Rate"),i18nc("SMART attr description","The total number of errors when writing a sector.")},
{202,i18nc("SMART attr name","Data Address Mark Errors"),i18nc("SMART attr description","Number of Data Address Mark errors (or vendor-specific).")},
{203,i18nc("SMART attr name","Run Out Cancel"),i18nc("SMART attr description","Number of ECC errors")},
{204,i18nc("SMART attr name","Soft ECC Correction"),i18nc("SMART attr description","Number of errors corrected by software ECC")},
{205,i18nc("SMART attr name","Thermal Asperity Rate"),i18nc("SMART attr description","Number of errors due to high temperature.")},
{206,i18nc("SMART attr name","Flying Height"),i18nc("SMART attr description","Height of heads above the disk surface. A flying height that is too low increases the chances of a head crash while a flying height that is too high increases the chances of a read/write error.")},
{207,i18nc("SMART attr name","Spin High Current"),i18nc("SMART attr description","Amount of surge current used to spin up the drive.")},
{208,i18nc("SMART attr name","Spin Buzz"),i18nc("SMART attr description","Number of buzz routines needed to spin up the drive due to insufficient power.")},
{209,i18nc("SMART attr name","Offline Seek Performance"),i18nc("SMART attr description","Drive's seek performance during its internal tests.")},
{211,i18nc("SMART attr name","Vibration During Write"),i18nc("SMART attr description","Vibration During Write")},
{212,i18nc("SMART attr name","Shock During Write"),i18nc("SMART attr description","Shock During Write")},
{220,i18nc("SMART attr name","Disk Shift"),i18nc("SMART attr description","Distance the disk has shifted relative to the spindle (usually due to shock or temperature).")},
{221,i18nc("SMART attr name","G-Sense Error Rate"),i18nc("SMART attr description","The number of errors resulting from externally-induced shock and vibration.")},
{222,i18nc("SMART attr name","Loaded Hours"),i18nc("SMART attr description","Time spent operating under data load.")},
{223,i18nc("SMART attr name","Load/Unload Retry Count"),i18nc("SMART attr description","Number of times head changes position.")},
{224,i18nc("SMART attr name","Load Friction"),i18nc("SMART attr description","Resistance caused by friction in mechanical parts while operating.")},
{225,i18nc("SMART attr name","Load/Unload Cycle Count"),i18nc("SMART attr description","Total number of load cycles.")},
{226,i18nc("SMART attr name","Load-In Time"),i18nc("SMART attr description","Total time of loading on the magnetic heads actuator (time not spent in parking area).")},
{227,i18nc("SMART attr name","Torque Amplification Count"),i18nc("SMART attr description","Number of attempts to compensate for platter speed variations.")},
{228,i18nc("SMART attr name","Power-Off Retract Cycle"),i18nc("SMART attr description","The number of times the magnetic armature was retracted automatically as a result of cutting power.")},
{230,i18nc("SMART attr name","GMR Head Amplitude"),i18nc("SMART attr description","Amplitude of "thrashing" (distance of repetitive forward/reverse head motion)")},
{232,i18nc("SMART attr name","Endurance Remaining"),i18nc("SMART attr description","Count of physical erase cycles completed on the drive as a percentage of the maximum physical erase cycles the drive supports")},
{233,i18nc("SMART attr name","Power-On Seconds"),i18nc("SMART attr description","Time elapsed in the power-on state")},
{235,i18nc("SMART attr name","Good Block Rate"),i18nc("SMART attr description","Count of available reserved blocks as percentage of the total number of reserved blocks")},
{240,i18nc("SMART attr name","Head Flying Hours<br/>or Transfer Error Rate (Fujitsu)"),i18nc("SMART attr description","Time while head is positioning<br/>or counts the number of times the link is reset during a data transfer.")},