2023-12-07 10:21:03 +00:00
|
|
|
# SPDX-FileCopyrightText: 2023 fosslinux <fosslinux@aussies.space>
|
|
|
|
#
|
|
|
|
# SPDX-License-Identifier: GPL-3.0-or-later
|
|
|
|
#
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
# This file follows a very simple, human readable and machine parseable syntax.
|
|
|
|
# Each line is in the format:
|
|
|
|
# <directive>: <arguments> <predicate>
|
|
|
|
#
|
|
|
|
# The supported directives and arguments are:
|
|
|
|
# - build; simply builds a particular package.
|
|
|
|
# eg, build: make-3.82
|
|
|
|
# - improve; runs a script that makes a distinct and logical improvement to the system.
|
|
|
|
# eg, improve: use_fhs
|
|
|
|
# - define: define a variable based upon other variables
|
|
|
|
# eg, define: BUILD_FIWIX = KERNEL_BOOTSTRAP == True || BUILD_KERNELS == True
|
|
|
|
# - jump: jump (usually) to a new kernel, executes a script with that name
|
|
|
|
# eg, jump: fiwix
|
2024-01-12 11:06:23 +00:00
|
|
|
# - uninstall; removes a package or filenames
|
|
|
|
# eg, uninstall: perl-5.6.2
|
|
|
|
# eg, uninstall: /usr/bin/lex /usr/bin/flex
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
#
|
2023-12-22 12:12:40 +00:00
|
|
|
# The following directives have special significance:
|
|
|
|
# - build directives beginning with "bash" (as well as jumps) trigger the generation of
|
|
|
|
# a new script
|
|
|
|
# - the first improve directive containing "network" is used by generator.py to deduce
|
|
|
|
# what source files need to be downloaded in advance (files referenced after that will
|
|
|
|
# be downloaded during bootstrap, unless --external-sources is given)
|
|
|
|
#
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
# Other features:
|
|
|
|
# - predicate; based on variables set in bootstrap.cfg, require for something to execute
|
|
|
|
# must be enclosed in brackets with spaces padded
|
2024-01-08 01:37:15 +00:00
|
|
|
# eg, build: fiwix-1.5.0-lb1 ( BUILD_FIWIX == True )
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
|
|
|
|
build: checksum-transcriber-1.0
|
|
|
|
build: simple-patch-1.0
|
|
|
|
build: mes-0.25
|
|
|
|
build: tcc-0.9.26
|
|
|
|
build: tcc-0.9.27
|
|
|
|
define: BUILD_FIWIX = ( KERNEL_BOOTSTRAP == True || BUILD_KERNELS == True )
|
2024-01-08 01:37:15 +00:00
|
|
|
build: fiwix-1.5.0-lb1 ( BUILD_FIWIX == True )
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: lwext4-1.0.0-lb1 ( BUILD_FIWIX == True )
|
|
|
|
build: kexec-fiwix-1.0 ( BUILD_FIWIX == True )
|
|
|
|
jump: fiwix ( KERNEL_BOOTSTRAP == True )
|
|
|
|
define: JOBS = 1 ( KERNEL_BOOTSTRAP == True )
|
|
|
|
build: make-3.82
|
|
|
|
build: patch-2.5.9
|
|
|
|
build: gzip-1.2.4
|
|
|
|
build: tar-1.12
|
|
|
|
build: sed-4.0.9
|
|
|
|
build: bzip2-1.0.8
|
|
|
|
build: coreutils-5.0
|
|
|
|
build: heirloom-devtools-070527
|
|
|
|
build: bash-2.05b
|
|
|
|
improve: setup_repo
|
|
|
|
improve: update_env
|
2024-01-12 11:12:47 +00:00
|
|
|
improve: merged_usr
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: flex-2.5.11
|
|
|
|
build: tcc-0.9.27
|
|
|
|
improve: musl_libdir
|
|
|
|
build: musl-1.1.24
|
|
|
|
build: tcc-0.9.27
|
|
|
|
build: musl-1.1.24
|
|
|
|
build: tcc-0.9.27
|
|
|
|
build: sed-4.0.9
|
|
|
|
build: bzip2-1.0.8
|
2024-01-28 01:25:59 +00:00
|
|
|
build: m4-1.4.10
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: flex-2.6.4
|
2024-01-12 11:15:43 +00:00
|
|
|
uninstall: /usr/bin/yacc
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: bison-3.4.1
|
|
|
|
build: bison-3.4.1
|
|
|
|
build: bison-3.4.1
|
|
|
|
build: grep-2.4
|
|
|
|
build: diffutils-2.7
|
|
|
|
build: coreutils-5.0
|
|
|
|
build: coreutils-6.10
|
|
|
|
build: gawk-3.0.4
|
|
|
|
build: perl-5.000
|
|
|
|
build: perl-5.003
|
|
|
|
build: perl5.004-05
|
|
|
|
build: perl5.005-03
|
|
|
|
build: perl-5.6.2
|
2024-01-12 20:47:17 +00:00
|
|
|
uninstall: perl-5.000 perl-5.003 perl5.004-05 perl5.005-03
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
improve: populate_device_nodes
|
|
|
|
build: autoconf-2.52
|
|
|
|
build: automake-1.6.3
|
|
|
|
build: automake-1.6.3
|
|
|
|
build: autoconf-2.53
|
|
|
|
build: automake-1.7
|
|
|
|
build: autoconf-2.54
|
|
|
|
build: autoconf-2.55
|
|
|
|
build: automake-1.7.8
|
|
|
|
build: autoconf-2.57
|
|
|
|
build: autoconf-2.59
|
|
|
|
build: automake-1.8.5
|
|
|
|
build: help2man-1.36.4
|
|
|
|
build: autoconf-2.61
|
|
|
|
build: automake-1.9.6
|
|
|
|
build: automake-1.10.3
|
|
|
|
build: autoconf-2.64
|
|
|
|
build: automake-1.11.2
|
|
|
|
build: autoconf-2.69
|
|
|
|
build: libtool-2.2.4
|
|
|
|
build: automake-1.15.1
|
|
|
|
build: binutils-2.30
|
|
|
|
build: musl-1.1.24
|
|
|
|
build: tcc-0.9.27
|
|
|
|
improve: populate_device_nodes
|
|
|
|
build: gcc-4.0.4
|
|
|
|
build: findutils-4.2.33
|
|
|
|
build: musl-1.2.4
|
|
|
|
build: linux-headers-4.9.10
|
|
|
|
build: gcc-4.0.4
|
|
|
|
build: util-linux-2.19.1
|
|
|
|
build: e2fsprogs-1.45.7
|
|
|
|
build: dhcpcd-10.0.1
|
|
|
|
build: kbd-1.15
|
|
|
|
build: make-3.82
|
|
|
|
build: ed-1.4
|
|
|
|
build: bc-1.07.1
|
|
|
|
define: BUILD_LINUX = ( CHROOT == False || BUILD_KERNELS == True )
|
|
|
|
build: kexec-linux-1.0.0 ( BUILD_LINUX == True )
|
|
|
|
build: kexec-tools-2.0.22 ( BUILD_LINUX == True )
|
2023-12-21 16:24:33 +00:00
|
|
|
improve: clean_sources
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: linux-4.9.10 ( BUILD_LINUX == True )
|
2023-12-23 06:18:24 +00:00
|
|
|
jump: break ( INTERNAL_CI == pass1 )
|
2024-01-12 14:59:27 +00:00
|
|
|
improve: populate_device_nodes
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
jump: linux ( CHROOT == False )
|
2024-01-01 23:05:58 +00:00
|
|
|
jump: move_disk ( KERNEL_BOOTSTRAP == True )
|
2024-01-01 22:18:55 +00:00
|
|
|
improve: finalize_job_count
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
improve: finalize_fhs
|
2024-01-01 21:51:33 +00:00
|
|
|
improve: swap ( SWAP_SIZE != 0 )
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: musl-1.2.4
|
2023-12-29 22:03:06 +00:00
|
|
|
build: curl-8.5.0
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
improve: get_network ( CHROOT == False )
|
|
|
|
build: bash-5.2.15
|
|
|
|
build: xz-5.4.1
|
|
|
|
build: file-5.44
|
|
|
|
build: libtool-2.4.7
|
|
|
|
build: tar-1.34
|
2023-12-29 00:53:31 +00:00
|
|
|
build: coreutils-9.4
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: pkg-config-0.29.2
|
|
|
|
build: make-4.2.1
|
|
|
|
build: gmp-6.2.1
|
|
|
|
build: autoconf-archive-2021.02.19
|
|
|
|
build: mpfr-4.1.0
|
|
|
|
build: mpc-1.2.1
|
|
|
|
build: flex-2.5.33
|
|
|
|
build: bison-2.3
|
|
|
|
build: bison-3.4.2
|
|
|
|
build: perl-5.10.1
|
|
|
|
build: dist-3.5-236
|
|
|
|
build: perl-5.32.1
|
2024-01-12 20:47:17 +00:00
|
|
|
uninstall: perl-5.6.2 perl-5.10.1
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: libarchive-3.5.2
|
|
|
|
build: openssl-1.1.1l
|
2023-12-29 01:14:27 +00:00
|
|
|
build: ca-certificates-3.95
|
2023-12-29 22:03:06 +00:00
|
|
|
build: curl-8.5.0
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: zlib-1.2.13
|
|
|
|
build: automake-1.16.3
|
|
|
|
build: autoconf-2.71
|
|
|
|
build: patch-2.7.6
|
|
|
|
build: gettext-0.21
|
|
|
|
build: texinfo-6.7
|
|
|
|
build: gcc-4.7.4
|
2023-12-21 00:03:15 +00:00
|
|
|
build: binutils-2.41
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: gperf-3.1
|
|
|
|
build: libunistring-0.9.10
|
|
|
|
build: libffi-3.3
|
|
|
|
build: libatomic_ops-7.6.10
|
|
|
|
build: gc-8.0.4
|
|
|
|
build: guile-3.0.9
|
|
|
|
build: which-2.21
|
|
|
|
build: grep-3.7
|
|
|
|
build: sed-4.8
|
|
|
|
build: autogen-5.18.16
|
|
|
|
build: musl-1.2.4
|
|
|
|
build: python-2.0.1
|
|
|
|
build: python-2.0.1
|
|
|
|
build: python-2.3.7
|
|
|
|
build: python-2.3.7
|
|
|
|
build: python-2.5.6
|
|
|
|
build: python-3.1.5
|
|
|
|
build: python-3.1.5
|
|
|
|
build: python-3.3.7
|
|
|
|
build: python-3.4.10
|
|
|
|
build: python-3.8.16
|
|
|
|
build: python-3.11.1
|
2024-01-12 20:48:21 +00:00
|
|
|
uninstall: python-2.0.1 python-2.3.7 python-3.1.5 python-3.3.7 python-3.4.10 python-3.8.16
|
2023-12-23 06:18:24 +00:00
|
|
|
jump: break ( INTERNAL_CI == pass1 ) # scripts are generated in pass1
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: gcc-10.4.0
|
2023-12-21 00:03:15 +00:00
|
|
|
build: binutils-2.41
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: gcc-13.1.0
|
2024-01-24 03:45:07 +00:00
|
|
|
improve: cleanup_filesystem
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
improve: null_time ( FORCE_TIMESTAMPS == True )
|
2023-12-21 16:56:22 +00:00
|
|
|
improve: update_checksums ( UPDATE_CHECKSUMS == True )
|
2024-01-01 22:36:13 +00:00
|
|
|
improve: after
|