2023-12-07 10:21:03 +00:00
|
|
|
# SPDX-FileCopyrightText: 2023 fosslinux <fosslinux@aussies.space>
|
|
|
|
#
|
|
|
|
# SPDX-License-Identifier: GPL-3.0-or-later
|
|
|
|
#
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
# This file follows a very simple, human readable and machine parseable syntax.
|
|
|
|
# Each line is in the format:
|
|
|
|
# <directive>: <arguments> <predicate>
|
|
|
|
#
|
|
|
|
# The supported directives and arguments are:
|
|
|
|
# - build; simply builds a particular package.
|
|
|
|
# eg, build: make-3.82
|
|
|
|
# - improve; runs a script that makes a distinct and logical improvement to the system.
|
|
|
|
# eg, improve: use_fhs
|
|
|
|
# - define: define a variable based upon other variables
|
|
|
|
# eg, define: BUILD_FIWIX = KERNEL_BOOTSTRAP == True || BUILD_KERNELS == True
|
|
|
|
# - jump: jump (usually) to a new kernel, executes a script with that name
|
|
|
|
# eg, jump: fiwix
|
2024-01-12 11:06:23 +00:00
|
|
|
# - uninstall; removes a package or filenames
|
|
|
|
# eg, uninstall: perl-5.6.2
|
|
|
|
# eg, uninstall: /usr/bin/lex /usr/bin/flex
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
#
|
2023-12-22 12:12:40 +00:00
|
|
|
# The following directives have special significance:
|
|
|
|
# - build directives beginning with "bash" (as well as jumps) trigger the generation of
|
|
|
|
# a new script
|
|
|
|
# - the first improve directive containing "network" is used by generator.py to deduce
|
|
|
|
# what source files need to be downloaded in advance (files referenced after that will
|
|
|
|
# be downloaded during bootstrap, unless --external-sources is given)
|
|
|
|
#
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
# Other features:
|
|
|
|
# - predicate; based on variables set in bootstrap.cfg, require for something to execute
|
|
|
|
# must be enclosed in brackets with spaces padded
|
2024-01-08 01:37:15 +00:00
|
|
|
# eg, build: fiwix-1.5.0-lb1 ( BUILD_FIWIX == True )
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
|
|
|
|
build: checksum-transcriber-1.0
|
|
|
|
build: simple-patch-1.0
|
2024-03-02 15:06:52 +00:00
|
|
|
build: mes-wip
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: tcc-0.9.26
|
|
|
|
build: tcc-0.9.27
|
|
|
|
define: BUILD_FIWIX = ( KERNEL_BOOTSTRAP == True || BUILD_KERNELS == True )
|
2024-01-08 01:37:15 +00:00
|
|
|
build: fiwix-1.5.0-lb1 ( BUILD_FIWIX == True )
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: lwext4-1.0.0-lb1 ( BUILD_FIWIX == True )
|
|
|
|
build: kexec-fiwix-1.0 ( BUILD_FIWIX == True )
|
|
|
|
jump: fiwix ( KERNEL_BOOTSTRAP == True )
|
|
|
|
define: JOBS = 1 ( KERNEL_BOOTSTRAP == True )
|
|
|
|
build: make-3.82
|
|
|
|
build: patch-2.5.9
|
|
|
|
build: gzip-1.2.4
|
|
|
|
build: tar-1.12
|
|
|
|
build: sed-4.0.9
|
|
|
|
build: bzip2-1.0.8
|
|
|
|
build: coreutils-5.0
|
|
|
|
build: heirloom-devtools-070527
|
|
|
|
build: bash-2.05b
|
|
|
|
improve: setup_repo
|
|
|
|
improve: update_env
|
2024-01-12 11:12:47 +00:00
|
|
|
improve: merged_usr
|
2024-01-23 18:33:55 +00:00
|
|
|
improve: populate_device_nodes
|
|
|
|
define: CONSOLES = ( INTERACTIVE == True && CHROOT == False )
|
|
|
|
improve: open_console ( CONSOLES == True )
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: flex-2.5.11
|
|
|
|
build: tcc-0.9.27
|
|
|
|
improve: musl_libdir
|
|
|
|
build: musl-1.1.24
|
|
|
|
build: tcc-0.9.27
|
|
|
|
build: musl-1.1.24
|
|
|
|
build: tcc-0.9.27
|
|
|
|
build: sed-4.0.9
|
|
|
|
build: bzip2-1.0.8
|
2024-02-05 09:55:19 +00:00
|
|
|
build: m4-1.4.7
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: flex-2.6.4
|
2024-01-12 11:15:43 +00:00
|
|
|
uninstall: /usr/bin/yacc
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: bison-3.4.1
|
|
|
|
build: bison-3.4.1
|
|
|
|
build: bison-3.4.1
|
|
|
|
build: grep-2.4
|
|
|
|
build: diffutils-2.7
|
|
|
|
build: coreutils-5.0
|
|
|
|
build: coreutils-6.10
|
|
|
|
build: gawk-3.0.4
|
|
|
|
build: perl-5.000
|
|
|
|
build: perl-5.003
|
|
|
|
build: perl5.004-05
|
|
|
|
build: perl5.005-03
|
|
|
|
build: perl-5.6.2
|
2024-01-12 20:47:17 +00:00
|
|
|
uninstall: perl-5.000 perl-5.003 perl5.004-05 perl5.005-03
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: autoconf-2.52
|
|
|
|
build: automake-1.6.3
|
|
|
|
build: automake-1.6.3
|
|
|
|
build: autoconf-2.53
|
|
|
|
build: automake-1.7
|
|
|
|
build: autoconf-2.54
|
|
|
|
build: autoconf-2.55
|
|
|
|
build: automake-1.7.8
|
|
|
|
build: autoconf-2.57
|
|
|
|
build: autoconf-2.59
|
|
|
|
build: automake-1.8.5
|
|
|
|
build: help2man-1.36.4
|
|
|
|
build: autoconf-2.61
|
|
|
|
build: automake-1.9.6
|
|
|
|
build: automake-1.10.3
|
|
|
|
build: autoconf-2.64
|
|
|
|
build: automake-1.11.2
|
|
|
|
build: autoconf-2.69
|
|
|
|
build: libtool-2.2.4
|
|
|
|
build: automake-1.15.1
|
|
|
|
build: binutils-2.30
|
|
|
|
build: musl-1.1.24
|
|
|
|
build: tcc-0.9.27
|
|
|
|
improve: populate_device_nodes
|
|
|
|
build: gcc-4.0.4
|
|
|
|
build: findutils-4.2.33
|
|
|
|
build: musl-1.2.4
|
Upgrade Linux kernel to 4.14.336
This is the last LTS version buildable using GCC 4.0.x. The next one,
version 4.19, requires at least GCC 4.6.
Fortunately, this is also the first version of the Linux kernel
without firmware blobs being included in /firmware, so the FSFLA
deblob scripts aren't needed anymore to ensure a fully auditable
kernel - the 3 remaining drivers that do include blobs masquerading
as source code are removed via a patch, avoiding all the other side
effects of the deblob scripts.
This doesn't compromise the trustworthiness of the bootstrapped
environment, since all the other drivers deblob would remove use
the firmware loader mechanism, which does nothing when the actual
firmware blobs aren't installed on the system separately. Features
dependent on firmware still won't work, but many drivers that load
firmware do so only optionally. This includes r8169, the driver for
the Realtek gigabit NICs found on many x86 motherboards.
This kernel is considerably larger than 4.9.10, and we build more
of it (including drivers that would previously get stripped away by
the deblob script, such as r8169), so to accommodate that, Fiwix
initrd size is increased by 64MiB, while lowering kexec space by
the same amount to ensure enough userspace memory available in Fiwix.
Fiwix's maximum open file count is also bumped from 1.5K to 2.5K.
The Documentation folder is deleted before build, to further save
space in the ramdisk.
2024-02-16 11:58:27 +00:00
|
|
|
build: linux-headers-4.14.336
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: gcc-4.0.4
|
|
|
|
build: util-linux-2.19.1
|
|
|
|
build: e2fsprogs-1.45.7
|
|
|
|
build: dhcpcd-10.0.1
|
|
|
|
build: kbd-1.15
|
|
|
|
build: make-3.82
|
|
|
|
build: ed-1.4
|
|
|
|
build: bc-1.07.1
|
|
|
|
define: BUILD_LINUX = ( CHROOT == False || BUILD_KERNELS == True )
|
|
|
|
build: kexec-linux-1.0.0 ( BUILD_LINUX == True )
|
|
|
|
build: kexec-tools-2.0.22 ( BUILD_LINUX == True )
|
2023-12-21 16:24:33 +00:00
|
|
|
improve: clean_sources
|
2024-02-14 14:38:06 +00:00
|
|
|
improve: clean_artifacts
|
Upgrade Linux kernel to 4.14.336
This is the last LTS version buildable using GCC 4.0.x. The next one,
version 4.19, requires at least GCC 4.6.
Fortunately, this is also the first version of the Linux kernel
without firmware blobs being included in /firmware, so the FSFLA
deblob scripts aren't needed anymore to ensure a fully auditable
kernel - the 3 remaining drivers that do include blobs masquerading
as source code are removed via a patch, avoiding all the other side
effects of the deblob scripts.
This doesn't compromise the trustworthiness of the bootstrapped
environment, since all the other drivers deblob would remove use
the firmware loader mechanism, which does nothing when the actual
firmware blobs aren't installed on the system separately. Features
dependent on firmware still won't work, but many drivers that load
firmware do so only optionally. This includes r8169, the driver for
the Realtek gigabit NICs found on many x86 motherboards.
This kernel is considerably larger than 4.9.10, and we build more
of it (including drivers that would previously get stripped away by
the deblob script, such as r8169), so to accommodate that, Fiwix
initrd size is increased by 64MiB, while lowering kexec space by
the same amount to ensure enough userspace memory available in Fiwix.
Fiwix's maximum open file count is also bumped from 1.5K to 2.5K.
The Documentation folder is deleted before build, to further save
space in the ramdisk.
2024-02-16 11:58:27 +00:00
|
|
|
build: linux-4.14.336 ( BUILD_LINUX == True )
|
2023-12-23 06:18:24 +00:00
|
|
|
jump: break ( INTERNAL_CI == pass1 )
|
2024-01-12 14:59:27 +00:00
|
|
|
improve: populate_device_nodes
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
jump: linux ( CHROOT == False )
|
2024-01-01 23:05:58 +00:00
|
|
|
jump: move_disk ( KERNEL_BOOTSTRAP == True )
|
2024-01-01 22:18:55 +00:00
|
|
|
improve: finalize_job_count
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
improve: finalize_fhs
|
2024-01-23 18:33:55 +00:00
|
|
|
improve: open_console ( CONSOLES == True )
|
2024-01-01 21:51:33 +00:00
|
|
|
improve: swap ( SWAP_SIZE != 0 )
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: musl-1.2.4
|
2023-12-29 22:03:06 +00:00
|
|
|
build: curl-8.5.0
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
improve: get_network ( CHROOT == False )
|
|
|
|
build: bash-5.2.15
|
2024-01-23 18:33:55 +00:00
|
|
|
improve: open_console ( CONSOLES == True )
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: xz-5.4.1
|
|
|
|
build: file-5.44
|
|
|
|
build: libtool-2.4.7
|
|
|
|
build: tar-1.34
|
2023-12-29 00:53:31 +00:00
|
|
|
build: coreutils-9.4
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: pkg-config-0.29.2
|
|
|
|
build: make-4.2.1
|
|
|
|
build: gmp-6.2.1
|
|
|
|
build: autoconf-archive-2021.02.19
|
|
|
|
build: mpfr-4.1.0
|
|
|
|
build: mpc-1.2.1
|
|
|
|
build: flex-2.5.33
|
|
|
|
build: bison-2.3
|
|
|
|
build: bison-3.4.2
|
|
|
|
build: perl-5.10.1
|
|
|
|
build: dist-3.5-236
|
|
|
|
build: perl-5.32.1
|
2024-01-12 20:47:17 +00:00
|
|
|
uninstall: perl-5.6.2 perl-5.10.1
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: libarchive-3.5.2
|
|
|
|
build: openssl-1.1.1l
|
2023-12-29 01:14:27 +00:00
|
|
|
build: ca-certificates-3.95
|
2023-12-29 22:03:06 +00:00
|
|
|
build: curl-8.5.0
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: zlib-1.2.13
|
|
|
|
build: automake-1.16.3
|
|
|
|
build: autoconf-2.71
|
|
|
|
build: patch-2.7.6
|
|
|
|
build: gettext-0.21
|
|
|
|
build: texinfo-6.7
|
|
|
|
build: gcc-4.7.4
|
2023-12-21 00:03:15 +00:00
|
|
|
build: binutils-2.41
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: gperf-3.1
|
|
|
|
build: libunistring-0.9.10
|
|
|
|
build: libffi-3.3
|
|
|
|
build: libatomic_ops-7.6.10
|
|
|
|
build: gc-8.0.4
|
|
|
|
build: guile-3.0.9
|
|
|
|
build: which-2.21
|
|
|
|
build: grep-3.7
|
|
|
|
build: sed-4.8
|
|
|
|
build: autogen-5.18.16
|
|
|
|
build: musl-1.2.4
|
|
|
|
build: python-2.0.1
|
|
|
|
build: python-2.0.1
|
|
|
|
build: python-2.3.7
|
|
|
|
build: python-2.3.7
|
|
|
|
build: python-2.5.6
|
|
|
|
build: python-3.1.5
|
|
|
|
build: python-3.1.5
|
|
|
|
build: python-3.3.7
|
|
|
|
build: python-3.4.10
|
|
|
|
build: python-3.8.16
|
|
|
|
build: python-3.11.1
|
2024-01-12 20:48:21 +00:00
|
|
|
uninstall: python-2.0.1 python-2.3.7 python-3.1.5 python-3.3.7 python-3.4.10 python-3.8.16
|
2023-12-23 06:18:24 +00:00
|
|
|
jump: break ( INTERNAL_CI == pass1 ) # scripts are generated in pass1
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: gcc-10.4.0
|
2023-12-21 00:03:15 +00:00
|
|
|
build: binutils-2.41
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
build: gcc-13.1.0
|
2024-01-22 14:23:32 +00:00
|
|
|
build: grub-2.06 ( BUILD_LINUX == True )
|
|
|
|
improve: make_bootable ( CHROOT == False )
|
2024-01-27 00:16:06 +00:00
|
|
|
build: libmd-1.1.0
|
2024-01-27 00:16:47 +00:00
|
|
|
build: libbsd-0.11.8
|
2024-01-27 00:18:11 +00:00
|
|
|
build: shadow-4.14.3
|
2024-01-27 00:18:32 +00:00
|
|
|
build: opendoas-6.8.2
|
2024-01-27 01:24:06 +00:00
|
|
|
build: gzip-1.13
|
2024-01-27 01:07:41 +00:00
|
|
|
build: diffutils-3.10
|
2024-01-27 04:37:15 +00:00
|
|
|
build: gawk-5.3.0
|
2024-02-06 06:44:32 +00:00
|
|
|
build: m4-1.4.19
|
2024-01-24 03:45:07 +00:00
|
|
|
improve: cleanup_filesystem
|
Remove the notion of "sys*"
- This idea originates from very early in the project and was, at the
time, a very easy way to categorise things.
- Now, it doesn't really make much sense - it is fairly arbitary, often
occuring when there is a change in kernel, but not from builder-hex0
to fiwix, and sysb is in reality completely unnecessary.
- In short, the sys* stuff is a bit of a mess that makes the project
more difficult to understand.
- This puts everything down into one folder and has a manifest file that
is used to generate the build scripts on the fly rather than using
coded scripts.
- This is created in the "seed" stage.
stage0-posix -- (calls) --> seed -- (generates) --> main steps
Alongside this change there are a variety of other smaller fixups to the
general structure of the live-bootstrap rootfs.
- Creating a rootfs has become much simpler and is defined as code in
go.sh. The new structure, for an about-to-be booted system, is
/
-- /steps (direct copy of steps/)
-- /distfiles (direct copy of distfiles/)
-- all files from seed/*
-- all files from seed/stage0-posix/*
- There is no longer such a thing as /usr/include/musl, this didn't
really make any sense, as musl is the final libc used. Rather, to
separate musl and mes, we have /usr/include/mes, which is much easier
to work with.
- This also makes mes easier to blow away later.
- A few things that weren't properly in packages have been changed;
checksum-transcriber, simple-patch, kexec-fiwix have all been given
fully qualified package names.
- Highly breaking change, scripts now exist in their package directory
but NOT WITH THE packagename.sh. Rather, they use pass1.sh, pass2.sh,
etc. This avoids manual definition of passes.
- Ditto with patches; default directory is patches, but then any patch
series specific to a pass are named patches-passX.
2023-11-06 23:51:23 +00:00
|
|
|
improve: null_time ( FORCE_TIMESTAMPS == True )
|
2023-12-21 16:56:22 +00:00
|
|
|
improve: update_checksums ( UPDATE_CHECKSUMS == True )
|
2024-01-01 22:36:13 +00:00
|
|
|
improve: after
|