andrius
/
live-bootstrap
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
live-bootstrap/sysa/run.sh

191 lines
4.0 KiB
Bash
Raw Normal View History

Add bash based build harness.
2021-01-29 01:31:56 +00:00
#!/bin/bash
# SPDX-FileCopyrightText: 2021 Andrius Štikonas <andrius@stikonas.eu>
Implement sha256summing in bash build harness 1. Adds sha256sum stage to the bash build harness. 2. Adds a third argument to build(), the checksum file name. This is used where there is more than one checksum file, most notably in multi-stage compilations. 3. Adds checksum files to all remaining programs. 4. Adds appropriate 3rd argument where needed (coreutils, tcc-musl, bison).
2021-02-18 07:29:58 +00:00
# SPDX-FileCopyrightText: 2021 fosslinux <fosslinux@aussies.space>
Rebuild musl libc after building tcc-musl, and then rebuild tcc-musl This fixes an issue with printf not printing doubles or floats correctly, and probably other subtle issues. tcc-musl also uses floats extensively, so rebuild it as well, to fix some other potential issues. Update checksums for all resulting binaries which have now changed. Co-authored-by: fosslinux <fosslinux@aussies.space>
2021-02-19 16:14:54 +00:00
# SPDX-FileCopyrightText: 2021 Paul Dersey <pdersey@gmail.com>
Implement sha256summing in bash build harness 1. Adds sha256sum stage to the bash build harness. 2. Adds a third argument to build(), the checksum file name. This is used where there is more than one checksum file, most notably in multi-stage compilations. 3. Adds checksum files to all remaining programs. 4. Adds appropriate 3rd argument where needed (coreutils, tcc-musl, bison).
2021-02-18 07:29:58 +00:00
#
Add bash based build harness.
2021-01-29 01:31:56 +00:00
# SPDX-License-Identifier: GPL-3.0-or-later
set -e
# shellcheck source=sysa/helpers.sh
. helpers.sh
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
. bootstrap.cfg
Add bash based build harness.
2021-01-29 01:31:56 +00:00
Add kbd-1.15. This also requires a patch to linux-headers; while we are at it, make linux-headers PREFIX agnostic.
2021-07-26 06:19:07 +01:00
export PREFIX=/usr
export SOURCES=/after
mkdir "${PREFIX}/sbin"
export PATH="${PREFIX}/bin:${PREFIX}/sbin"
Create device nodes.
2021-02-27 12:22:22 +00:00
populate_device_nodes() {
# http://www.linuxfromscratch.org/lfs/view/6.1/chapter06/devices.html
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
mkdir -p "${1}/dev"
test -c "${1}/dev/null" || mknod -m 666 "${1}/dev/null" c 1 3
test -c "${1}/dev/zero" || mknod -m 666 "${1}/dev/zero" c 1 5
test -c "${1}/dev/ptmx" || mknod -m 666 "${1}/dev/ptmx" c 5 2
test -c "${1}/dev/tty" || mknod -m 666 "${1}/dev/tty" c 5 0
test -c "${1}/dev/random" || mknod -m 444 "${1}/dev/random" c 1 8
test -c "${1}/dev/urandom" || mknod -m 444 "${1}/dev/urandom" c 1 9
test -c "${1}/dev/console" || mknod -m 666 "${1}/dev/console" c 5 1
}
create_sysb() {
# Copy everything in
echo "Creating sysb rootfs"
mkdir -p /sysb/usr
for d in bin include lib libexec sbin share; do
Add kbd-1.15. This also requires a patch to linux-headers; while we are at it, make linux-headers PREFIX agnostic.
2021-07-26 06:19:07 +01:00
cp -r "${PREFIX}/${d}" "/sysb/usr/${d}"
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
done
populate_device_nodes /sysb
}
go_sysb() {
# Mount proc for kexec
mkdir /proc /etc
mount -t proc proc /proc
# kexec time
echo "Loading kernel + sysb initramfs using kexec"
kexec -l "${PREFIX}/boot/linux-2.6.16.62" --console-serial \
Add kbd-1.15. This also requires a patch to linux-headers; while we are at it, make linux-headers PREFIX agnostic.
2021-07-26 06:19:07 +01:00
--append="root=/dev/ram0 init=/init clocksource=acpi_pm clock=pmtmr"
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
echo "kexecing into sysb"
kexec -e
Create device nodes.
2021-02-27 12:22:22 +00:00
}
Update m4 to 1.4.7
2021-02-07 15:39:42 +00:00
build flex-2.5.11
Add bash based build harness.
2021-01-29 01:31:56 +00:00
Split mes libc into a separate source package. Drop one of the mes git submodules.
2021-04-16 16:28:34 +01:00
# Patch meslibc to support > 255 command line arguments
build mes-0.23 mes-libc-0.23.sh
build tcc-0.9.27 tcc-meslibc-rebuild.sh checksums/tcc-meslibc-rebuild
run.sh: replace default arguments written out with '' '' matches as an empty string which bash evaluates to be nothing, tricking it into using the alternative text.
2021-04-13 13:34:30 +01:00
build musl-1.1.24 '' checksums/pass1
Build flex 2.5.11.
2021-01-28 18:53:44 +00:00
Change the part numbering system + Move to .rst Parts have been split out into seperate file from README. Convert README to .rst; remove part numbers from scripts.
2021-02-25 05:48:21 +00:00
# Rebuild tcc using musl
Rebuild musl libc after building tcc-musl, and then rebuild tcc-musl This fixes an issue with printf not printing doubles or floats correctly, and probably other subtle issues. tcc-musl also uses floats extensively, so rebuild it as well, to fix some other potential issues. Update checksums for all resulting binaries which have now changed. Co-authored-by: fosslinux <fosslinux@aussies.space>
2021-02-19 16:14:54 +00:00
build tcc-0.9.27 tcc-musl-pass1.sh checksums/tcc-musl-pass1
Add musl 1.1.24.
2021-02-01 01:09:24 +00:00
Change the part numbering system + Move to .rst Parts have been split out into seperate file from README. Convert README to .rst; remove part numbers from scripts.
2021-02-25 05:48:21 +00:00
# Rebuild musl using tcc-musl
run.sh: replace default arguments written out with '' '' matches as an empty string which bash evaluates to be nothing, tricking it into using the alternative text.
2021-04-13 13:34:30 +01:00
build musl-1.1.24 '' checksums/pass2
Build tcc-musl.
2021-02-03 00:16:39 +00:00
Change the part numbering system + Move to .rst Parts have been split out into seperate file from README. Convert README to .rst; remove part numbers from scripts.
2021-02-25 05:48:21 +00:00
# Rebuild tcc-musl using new musl
Rebuild musl libc after building tcc-musl, and then rebuild tcc-musl This fixes an issue with printf not printing doubles or floats correctly, and probably other subtle issues. tcc-musl also uses floats extensively, so rebuild it as well, to fix some other potential issues. Update checksums for all resulting binaries which have now changed. Co-authored-by: fosslinux <fosslinux@aussies.space>
2021-02-19 16:14:54 +00:00
build tcc-0.9.27 tcc-musl-pass2.sh checksums/tcc-musl-pass2
Add sha-2 (commit 61155d) Unfortunatley the sha2 project does not have versioned releases so we use the latest commit. We have also manually added a frontend to sha-2 to allow us to invoke it from the command line, thanks bittrof for the help!
2021-02-15 08:33:12 +00:00
Buil sed 4.0.9 with musl.
2021-03-11 18:12:52 +00:00
# Rebuild sed using musl
Update initial build of sed from version 4.0.7 to 4.0.9
2021-03-17 17:27:19 +00:00
build sed-4.0.9 sed-4.0.9.sh checksums/pass2
Buil sed 4.0.9 with musl.
2021-03-11 18:12:52 +00:00
Change the part numbering system + Move to .rst Parts have been split out into seperate file from README. Convert README to .rst; remove part numbers from scripts.
2021-02-25 05:48:21 +00:00
# Rebuild bzip2 using musl
Rebuild bzip2 after building tcc and musl The tcc-mes build of bzip2 was unable to open files from stdin.
2021-02-24 01:28:23 +00:00
build bzip2-1.0.8 bzip2-1.0.8.sh checksums/bzip2-pass2
Rebuild musl libc after building tcc-musl, and then rebuild tcc-musl This fixes an issue with printf not printing doubles or floats correctly, and probably other subtle issues. tcc-musl also uses floats extensively, so rebuild it as well, to fix some other potential issues. Update checksums for all resulting binaries which have now changed. Co-authored-by: fosslinux <fosslinux@aussies.space>
2021-02-19 16:14:54 +00:00
Rebuild bzip2 after building tcc and musl The tcc-mes build of bzip2 was unable to open files from stdin.
2021-02-24 01:28:23 +00:00
build m4-1.4.7
Rebuild musl libc after building tcc-musl, and then rebuild tcc-musl This fixes an issue with printf not printing doubles or floats correctly, and probably other subtle issues. tcc-musl also uses floats extensively, so rebuild it as well, to fix some other potential issues. Update checksums for all resulting binaries which have now changed. Co-authored-by: fosslinux <fosslinux@aussies.space>
2021-02-19 16:14:54 +00:00
Rebuild bzip2 after building tcc and musl The tcc-mes build of bzip2 was unable to open files from stdin.
2021-02-24 01:28:23 +00:00
build flex-2.6.4
Implement sha256summing in bash build harness 1. Adds sha256sum stage to the bash build harness. 2. Adds a third argument to build(), the checksum file name. This is used where there is more than one checksum file, most notably in multi-stage compilations. 3. Adds checksum files to all remaining programs. 4. Adds appropriate 3rd argument where needed (coreutils, tcc-musl, bison).
2021-02-18 07:29:58 +00:00
build bison-3.4.1 stage1.sh checksums/stage1
build bison-3.4.1 stage2.sh checksums/stage2
build bison-3.4.1 stage3.sh checksums/stage3
Move grep after musl.
2021-02-04 21:41:43 +00:00
Add bison 3.4.1.
2021-02-10 18:06:40 +00:00
build grep-2.4
Move diffutils after musl.
2021-02-06 00:16:32 +00:00
build diffutils-2.7
Change the part numbering system + Move to .rst Parts have been split out into seperate file from README. Convert README to .rst; remove part numbers from scripts.
2021-02-25 05:48:21 +00:00
# Rebuild coreutils using musl
Implement sha256summing in bash build harness 1. Adds sha256sum stage to the bash build harness. 2. Adds a third argument to build(), the checksum file name. This is used where there is more than one checksum file, most notably in multi-stage compilations. 3. Adds checksum files to all remaining programs. 4. Adds appropriate 3rd argument where needed (coreutils, tcc-musl, bison).
2021-02-18 07:29:58 +00:00
build coreutils-5.0 coreutils-5.0.sh checksums/pass2
Rebuild coreutils-5.0 with tcc+musl and more utilities Add comm, expr, date, dd, sort, uname, uniq
2021-02-07 23:05:02 +00:00
Replace coreutils-6.3 with coreutils-6.10 Build only date, mktemp, and sha256sum
2021-03-23 19:14:45 +00:00
# Build only date, mktemp and sha256sum
build coreutils-6.10
Build sha256sum from coreutils 6.3.
2021-02-28 20:53:20 +00:00
Add gawk-3.0.4.
2021-02-11 09:22:12 +00:00
build gawk-3.0.4
Switch to perl tarballs generated from archiving git tags.
2021-02-17 20:23:50 +00:00
build perl-5.000
Add perl 5.000.
2021-02-14 15:36:05 +00:00
Switch to perl tarballs generated from archiving git tags.
2021-02-17 20:23:50 +00:00
build perl-5.003
Build perl 5.003.
2021-02-16 23:20:34 +00:00
Build Perl 5.4.50.
2021-02-17 23:46:18 +00:00
build perl5.004_05
Perl 5.005_03
2021-02-18 23:19:09 +00:00
build perl5.005_03
Add Perl 5.6.2.
2021-02-24 01:02:10 +00:00
build perl-5.6.2
Create device nodes.
2021-02-27 12:22:22 +00:00
populate_device_nodes
Rebuild autoconf 2.52.
2021-02-27 17:35:02 +00:00
build autoconf-2.52 stage1.sh
Install autoconf 2.52.
2021-02-21 21:09:47 +00:00
Bootstrap aclocal.
2021-03-17 00:24:37 +00:00
build automake-1.6.3 stage1.sh
build automake-1.6.3 stage2.sh
build automake-1.6.3 stage3.sh
build automake-1.4-p6
Add automake-1.4-p6.
2021-02-27 17:08:17 +00:00
Rebuild autoconf 2.52.
2021-02-27 17:35:02 +00:00
build autoconf-2.52 stage2.sh
Add autoconf 2.13.
2021-02-27 20:07:04 +00:00
build autoconf-2.13
Autoconf 2.12.
2021-02-27 22:42:23 +00:00
build autoconf-2.12
GNU Libtool 2.2.4
2021-03-25 19:14:34 +00:00
build libtool-1.4
Add libtool 1.4.
2021-03-12 00:28:29 +00:00
start binutils
2021-02-24 14:38:10 +00:00
build binutils-2.14
Rebuild musl with fewer patches.
2021-03-03 00:05:33 +00:00
# Build musl with fewer patches
build musl-1.1.24 binutils-rebuild.sh checksums/pass3 patches-pass3
populate_device_nodes
Rebuild tcc against new musl.
2021-03-03 00:54:17 +00:00
# Rebuild tcc-musl using new musl
Move tcc 0.9.27 after bzip2. This also allows to merge two builds of tcc 0.9.27. Drop tcc 0.9.27 git submodule.
2021-04-15 01:45:06 +01:00
build tcc-0.9.27 tcc-musl-pass3.sh checksums/tcc-musl-pass3 patches-musl-pass3
Rebuild tcc against new musl.
2021-03-03 00:54:17 +00:00
Autoconf 2.53.
2021-03-17 22:17:11 +00:00
build autoconf-2.53 stage1.sh
build autoconf-2.53 stage2.sh
Automake 1.7 and Autoconf 2.54
2021-03-18 00:23:40 +00:00
build automake-1.7 stage1.sh
build autoconf-2.54 stage1.sh
build autoconf-2.54 stage2.sh
build automake-1.7 stage2.sh
GNU Autoconf 2.55.
2021-03-18 17:47:12 +00:00
build autoconf-2.55
Automake 1.7.8.
2021-03-18 19:25:50 +00:00
build automake-1.7.8
Autoconf 2.57.
2021-03-18 19:33:54 +00:00
build autoconf-2.57
Autoconf 2.59.
2021-03-18 19:37:07 +00:00
build autoconf-2.59
Automake 1.8.5.
2021-03-18 19:53:06 +00:00
build automake-1.8.5
help2man-1.36.4
2021-03-19 15:40:07 +00:00
build help2man-1.36.4
GNU Autoconf 2.61
2021-03-19 20:00:43 +00:00
build autoconf-2.61 stage1.sh
build autoconf-2.61 stage2.sh
Build bash 5.1 only after GCC.
2021-03-21 16:10:53 +00:00
build automake-1.9.6 stage1.sh
build automake-1.9.6 stage2.sh
bash-3.2.57: Build new package to replace bash 2.05b Resulting build now works interactively
2021-02-25 19:52:05 +00:00
GNU findutils 4.2.33
2021-03-25 17:52:31 +00:00
build findutils-4.2.33
GNU Libtool 2.2.4
2021-03-25 19:14:34 +00:00
build libtool-2.2.4
GNU Automake 1.10.3
2021-03-25 20:39:08 +00:00
build automake-1.10.3
Downgrade autoconf to 2.64.
2021-06-30 18:43:33 +01:00
build autoconf-2.64
GNU Autoconf 2.65
2021-03-25 21:35:43 +00:00
Build bash 5.1 only after GCC.
2021-03-21 16:10:53 +00:00
build gcc-4.0.4 pass1.sh checksums/pass1
Add linux headers 5.10.41. Needed for kexec-tools. Not equivalent to kernel version; kernel API is stable and does not change. Therefore we can use any (latest) version.
2021-06-10 11:26:46 +01:00
build linux-headers-5.10.41 '' '' '' linux-5.10.41
Build bash 5.1 only after GCC.
2021-03-21 16:10:53 +00:00
build musl-1.2.2
build gcc-4.0.4 pass2.sh checksums/pass2
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
if [ "${CHROOT}" = False ]; then
build util-linux-2.19.1
Add util-linux 2.19.1.
2021-06-22 11:11:23 +01:00
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
build kexec-tools-2.0.22
Add kexec-tools 2.0.22.
2021-06-10 11:27:45 +01:00
Add kbd-1.15. This also requires a patch to linux-headers; while we are at it, make linux-headers PREFIX agnostic.
2021-07-26 06:19:07 +01:00
build kbd-1.15
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
create_sysb
Add linux kernel 2.6.16.62.
2021-06-29 01:42:39 +01:00
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
build linux-2.6.16.62
Build bash 5.1 only after GCC.
2021-03-21 16:10:53 +00:00
Add sysb and sysc scaffolding. Now that we have the Linux Kernel built, we move to a full-disk (rather than initramfs) setup in sysc. However, we cannot assume the seed kernel has support for mounting hard drives. So, first we need to kexec into sysb, which is used as a jumping off point to create the hard drive for sysc. Additionally, since 2.6.16 does not have support for on-demand initramfs (initramfs must be built into kernel), we will have to rebuild the linux kernel within sysb without the initramfs. All of this process is not performed for chroot mode. Instead, we skip sysb and jump straight to sysc, copying over appropriate data. The python scripts have been changed slightly. Each sys* inherits SysGeneral, which contains various functions which are not specific to any sys* and simplifies those files. rootfs now also handles sysb and sysc. bootstrap.cfg also gives an indication whether we are running in a chroot to avoid attempting to kexec/mount within a chroot.
2021-07-06 01:52:10 +01:00
go_sysb
fi