Previously, there was no way to access the additional consoles in
qemu mode, due to qemu running in -nographic mode with a serial
console. This is perfectly fine in non-interactive mode, but we can
make interactive mode more usable by using a graphical console like
on bare metal.
Also drop -no-reboot from interactive mode, since rebooting (e.g.
to load a newly compiled kernel) makes sense in this case.
This was removed as part of the simplify refactor, severely slowing
down qemu and bare-metal builds. Restoring it brings us back to the
same build times that we saw before the refactor.
This adds a new flag, -i / --interactive, which enables opening a
Bash prompt whenever something goes wrong in the bootstrap. This is
highly useful when developing or debugging live-bootstrap, but it
needs to be off by default, for use in automated processes.
In the future, asking for variables at runtime could (and perhaps
should) also be gated behind this flag.
There is nothing temporary about our "tmpdir" - its sole purpose is to
contain the final product of the bootstrap process. Thus, removing it
at the end of bootstrap amounts to doing the entire process for nothing.
To remedy this, --tmpdir is renamed --target, keeping the -t short form,
and defaulting to "target" instead of "tmp" to make its purpose clearer.
The --preserve option is removed, as the target is now always preserved.
* Support specifying the size of the target disk image for qemu
* For bare metal, only pad the image to the next megabyte
* Use truncate() to extend images, instead of writing zeros (faster)
* Return None from get_disk() with nonexistent name
* Leave 1MiB on non-boot disks, or 1GiB on boot disks, unpartitioned
(for proper 4K alignment and to help preserve the srcfs or boot
partition creation)
* Fix qemu invocation when an external.img is not used
* Make -qr work with kernel bootstrap (will need kexec-fiwix fix)
The gap between the chroot and non-chroot bootstrap modes started in,
7ecad37 because BuildStream's sandbox was missing some device nodes.
With the latest version of buildbox-run-bubblewrap, a few of the
missing devices were made available to BuildStream's sandbox and
there is no longer a need to keep this gap. In fact, compatibilty
with newer BuildStream versions now requires these devices to be
present.
This change also partially reverts d0a5221, which had to remove
/dev/ptmx as a consequence of the aforementioned gap.
A tiny bootloader bootstrap has been added to compile the builder-hex0 kernel from hex0 source.
The boot compiler is builder-hex0-x86-stage1.hex0 and builder-hex0-x86-stage1.bin.
The builder-hex0 kernel is now named builder-hex0-x86-stage2.hex0.
The inclusion of a binary seed resolves the problem with the previous strategy which used an
architecture-specific hex0 compiler.
If sysb detects a full disk (i.e. DISK=sda) it now partitions the disk unconditionally because
previously fdisk was reporting existing but empty partitions which resulted in no
parititions being created.
e2fsprogs is now built with --disable-tls because musl was built on Fiwix without full threading
support and mkfs.ext4 was crashing without disabling thread local storage.
kexec-linux writes the linux kernel and initramfs to a RAM drive on Fiwix which ensure
a pre-allocated contiguous memory block. The following is written to the ram drive:
a 32-bit number which is the size of the kernel in bytes, a 32-bit number which is the size
of the initramfs in bytes, followed by the Linux kernel image, followed by the initramfs.
kexec-fiwix invokes a sync syscall to ensure all writes are flushed to
the ram drive and then initiates the kexec by shutting down Fiwix with a reboot syscall.
Fiwix knows whether and how to perform the kexec based on kernel parameters passed to it.
The main motivations to have this are:
* Detect checksum changes with chroot/bwrap builds
* Avoid removing checksums from `SHA256SUMS.pkgs` when unsing `--update-checksums`
* Find crashes that would otherwise be missed in `builder-hex0`
Ensures that when `--external-sources` is used, the build does not require a working internet connection.
`--unshare-net` is always passed for the sysa phase.
By using --cores argument to rootfs.py, JOBS= is set in the
live-bootstrap environment, and -j${JOBS} is used on builds. This speeds
larger packages up significantly.
A fair number of packages do not build properly with parallelism. Most
of these, at least for now, are disabled with -j1.
- Split out tmpdir logic into a separate entity & add the appropriate
arguments and checks.
- sysb can be removed since there is now no associated logic.
- Move disk/etc logic into tmpdir.py.
- disk to be created (blank disk given to live-bootstrap) (default)
- disk to already exist but sources downloaded within live-bootstrap
- sources to be downloaded outside live-bootstrap (non-blank disk given
to live-bootstrap)
Also migrate sysb to use sys_transfer in QEMU mode also.
Note that this means copy_sysc is now irrelevant. sysc is *always*
sourced from sysa.
Gábor Stefanik
fosslinux
rick-masters
Andrius Štikonas
Seppo Yli-Olli
Dor Askayo
Paul Dersey
Eduardo Sánchez Muñoz