# live-bootstrap An attempt to provide a reproducible, automatic, complete end-to-end bootstrap from a minimal number of binary seeds to a supported fully functioning operating system. ## Get me started! 1. `git clone https://github.com/fosslinux/live-bootstrap` 2. `git submodule update --init --recursive` 3. Provide a kernel (vmlinuz file) as the name kernel in the root of the repository. 4. `./rootfs.sh` - ensure your account has kvm privileges and qemu installed. a. Alternatively, run `./rootfs.sh chroot` to run it in a chroot. b. Alternatively, run `./rootfs.sh` but don't run the actual virtualization and instead copy sysa/tmp/initramfs.igz to a USB or some other device and boot from bare metal. 6. Wait. 7. Currently, live-bootstrap doesn't provide anything to you, as it is incomplete. ## Background This project is a part of the bootstrappable project, a project that aims to be able to build complete computing platforms through the use of source code. When you build a compiler like GCC, you need another C compiler to compile the compiler - turtles all the way down. Even the first GCC compiler was written in C. There has to be a way to break the chain... There has been significant work on this over the last 5 years, from Jeremiah Orians' stage0, hex2 and M2-Planet to janneke's Mes. We have a currently, fully-functioning chain of bootstrapping from the 357-byte hex0 seed to a complete GCC compiler and hence a full Linux operating system. From there, it is trivial to move to other UNIXes. However, there is only currently one vector through which this can be automatically done, GNU Guix. While the primary author of this project does not believe Guix is a bad project, the great reliance on Guile, the complexity of many of the scripts and the rather steep learning curve to install and run Guix make it a very non plug-and-play solution. Furthermore, there is currently (Jan 2021) no possible way to run the bootstrap from outside of a pre-existing Linux environment. Additionally, Guix uses many scripts and distributed files that cannot be considered source code. (NOTE: Guix is working on a Full Source Bootstrap, but I'm not completely sure what that entails). Furthermore, having an alternative bootstrap automation tool allows people to have greater trust in the bootstrap procedure. ## Comparison between GNU Guix and live-bootstrap | Item | Guix | live-bootstrap | | -- | -- | -- | | Total size of seeds [1] | ~30MB (Reduced Source Bootstrap) [2] | ~1KB | | Use of kernel | Linux-Libre Kernel | Any Linux Kernel (2.6+) [3] | | Implementation complete | Yes | No (in development) | | Automation | Almost fully automatic | Optional user customization | [1]: Excluding kernel. [2]: Reiterating that Guix is working on a full source bootstrap, although that still uses guile (~12 MB). [3]: Work is ongoing to use other, smaller POSIX kernels. ## Why would I want bootstrapping? That is outside of the scope of this README. Here's a few things you can look at: - https://bootstrappable.org - Trusting Trust Attack (as described by Ken Thompson) - https://guix.gnu.org/manual/en/html_node/Bootstrapping.html - Collapse of the Internet (eg CollapseOS) ## Specific things to be bootstrapped GNU Guix is currently the furthest along project to automate bootstrapping. However, there are a number of non-auditable files used in many of their packages. Here is a list of file types that we deem unsuitable for bootstrapping. 1. Binaries (apart from seed hex0, kaem, kernel). 2. Any pre-generated configure scripts, or Makefile.in's from autotools. 3. Pre-generated bison/flex parsers (identifiable through a `.y` file). 4. Any source code/binaries downloaded within a software's build system that is outside of our control to verify before use in the build system. 5. Any non-free software. [1] [1]: We only use software licensed under a FSF-approved free software license. ## How does this work? ### sysa sysa is the first 'system' used in live-bootstrap. We move to a new system after a reboot, which often occurs after the movement to a new kernel. It is run by the seed Linux kernel provided by the user, and has 16 parts. #### Part 1: mescc-tools-seed This is where all the magic begins. We start with our hex0 and kaem seeds and bootstrap our way up to M2-Planet, a subset of C, and mes-m2, an independent port of GNU Mes to M2-Planet. The following steps are taken here: - hex0 (seed) - hex0 compiles hex1 - hex0 compiles catm - hex1 compiles hex2 (v1) - hex2 (v1) compiles M0 - M0 compiles cc_x86 - cc_x86 compiles M2-Planet (v1) - M2-Planet (v1) compiles blood-elf (v1) - M2-Planet (v1) compiles hex2 (final) - M2-Planet (v1) compiles M1 - M2-Planet (v1) compiles kaem - M2-Planet (v1) compiles blood-elf (final) - M2-Planet (v1) compiles get_machine - M2-Planet (v1) compiles M2-Planet (final) This seems very intimidating, but becomes clearer when reading the source: https://github.com/oriansj/mescc-tools-seed/blob/master/x86/ (start at mescc-tools-seed-kaem.kaem). From here, we can move on from the lowest level stuff. #### Part 2: mescc-tools-extra mescc-tools and mes-m2 are the projects bootstrapped by mescc-tools-seed. However, we have some currently unmerged additions to mescc-tools that we require for this project, namely filesystem utilities `cp` and `chown`. This allows us to have one unified directory for our binaries. #### Part 3: `/after` We now move into the `/after` directory. As mescc-tools-seed has no concept of `chdir()` (not added until very late in mescc-tools-seed), we have to copy a lot of files into the root of the initramfs, making it very messy. We get into the move ordered directory `/after` here, copying over all of the required binaries from `/`. #### Part 4: blynn-compiler `blynn-compiler` is a project on top of mescc-tools-seed to bootstrap a minimal haskell compiler from M2-Planet. While we don't currently use this for anything, it is planned to be eventually used to bootstrap the next part. #### Part 5: mes `mes` is a scheme interpreter. It runs the sister project `mescc`, which is a C compiler written in scheme, which links against the Mes C Library. All 3 are included in this same repository. Note that we are using the experimental `wip-m2` branch to jump over the gap between `M2-Planet` and `mes`. There are two stages to this part: 1. Compiling an initial mes using `M2-Planet`. Note that this is *only* the Mes interpreter, not the libc or anything else. 2. We then use this to recompile the Mes interpreter as well as building the libc. This second interpreter is faster and less buggy. We need the libc to compile all the programs until we get glibc. #### Part 6, 7: tinycc `tinycc` is a minimal C compiler that aims to be small and fast. It complies with all C89 and most of C99 standards. This is also a two-tiered process: 1. First, we compile janneke's fork of tcc 0.9.26 using `mescc`, containing 27 patches to make it operate well in the bootstrap environment and make it compilable using `mescc`. This is a non-trivial process and as seen within tcc.kaem has many different parts within it: a. tcc 0.9.26 is first compiled using `mescc`. b. The mes libc is recompiled using tcc (`mescc` has a non-standard `.a` format), including some additions for later programs. c. tcc 0.9.26 is recompiled 5(!) times to add new features that are required for other features, namely `long long` and `float`. Each time, the libc is also recompiled. 2. Then we compile upstream tcc 0.9.27, the latest release of tinycc, using the final version of tcc 0.9.26. We then recompile the libc once more. From this point onwards, until further notice, all programs are compiled using tinycc 0.9.27. Note that now we begin to delve into the realm of old GNU software, using older versions compilable by tinycc. Prior to this point, all tools have been adapted significantly for the bootstrap; now, we will be using old tooling instead. #### Part 8: sed 4.0.7 You are most likely aware of GNU `sed`, a line editor. #### Part 9: tar 1.12 GNU `tar` is the most common archive format used by software source code, often compressed also. To avoid continuing using submodules, we build GNU tar 1.12, the last version compilable by tinycc without significant patching. #### Part 10: gzip 1.2.4 `gzip` is the most common compression format used for software source code. It is luckily distributed as a barebones uncompressed `.tar`, which we extract and then build. We do require deletion of a few lines unsupported by mes libc. Going forward, we can now use `.tar.gz` for source code. #### Part 11: patch 2.5.9 `patch` is a very useful tool at this stage, allowing us to make significantly more complex edits, including just changes to lines. Luckily, we are able to patch patch using sed only. #### Part 12: patched mes-libc Since patch is available at this point, we can apply additional fixes to mes-libc that are not included in the wip-m2 branch and recompile libc. #### Part 13: patched tinycc In Guix, tinycc is patched to force static linking. Prior to this step, we have been forced to manually specify static linking for each tool. Now that we have patch, we can patch tinycc to force static linking and then recompile it. Note that we have to do this using tinycc 0.9.26, as tinycc 0.9.27 cannot recompile itself for unknown reasons. #### Part 14: make 3.80 GNU `make` is now built so we have a more robust building system. `make` allows us to do things like define rules for files rather than writing complex kaem scripts. #### Part 15: bzip2 1.0.8 `bzip2` is a compression format that compresses more than `gzip`. It is preferred where we can use it, and makes source code sizes smaller. #### Part 16: coreutils 5.0.0 GNU Coreutils is a collection of widely used utilities such as `cat`, `chmod`, `chown`, `cp`, `install`, `ln`, `ls`, `mkdir`, `mknod`, `mv`, `rm`, `rmdir`, `tee`, `test`, `true`, and many others. A few of the utilities cannot be easily compiled with Mes C library, so we skip them. #### Part 17: heirloom devtools `lex` and `yacc` from the Heirloom project. The Heirloom project is a collection of standard UNIX utilities derived from code by Caldera and Sun. Differently from the analogous utilities from the GNU project, they can be compiled with a simple `Makefile`. #### Part 18: bash 2.05b GNU `bash` is the most well known shell and the most complex piece of software so far. However, it comes with a number of great benefits over kaem, including proper POSIX sh support, globbing, etc. Bash ships with a bison pre-generated file here which we delete. Unfortunately, we have not bootstrapped bison but fortunately for us, heirloom yacc is able to cope here. #### Part 19: flex 2.5.11 `flex` is a tool for generating lexers or scanners: programs that recognize lexical patters. Unfortunately `flex` also depends on itself for compiling its own scanner, so first flex 2.5.11 is compiled, with its scanner definition manually modified so that it can be processed by lex for the Heirloom project (the required modifications are mostly syntactical, plus a few workarounds to avoid some flex advanced features). #### Part 20: musl 1.1.24 `musl` is a C standard library that is lightweight, fast, simple, free, and strives to be correct in the sense of standards-conformance and safety. `musl` is used by some distributions of GNU/Linux as their C library. Our previous Mes C library was incomplete which prevented us from building many newer or more complex programs. `tcc` has slight problems when building and linking `musl`, so we apply a few patches. In particular, we replace all weak symbols with strong symbols and will patch `tcc` in the next step to ignore duplicate symbols. #### Part 21: tcc 0.9.27 (musl) We recompile `tcc` against musl. This is a two stage process. First we build tcc-0.9.27 that itself links to Mes C library but produces binaries linked to musl. Then we recompile newly produced tcc with itself. Interestingly, tcc-0.9.27 linked against musl is self hosting. Finally, we rebuild musl once more with the new `tcc`. #### Part 22: m4 1.4.7 `m4` is the first piece of software we need in the autotools suite, flex 2.6.4 and bison. It allows macros to be defined and files to be generated from those macros. #### Part 23: flex 2.6.14 We recompile unpatched GNU `flex` using older flex 2.5.11. This is again a two stage process, first compiling flex using `scan.c` (from `scan.l`) created by old flex, then recompile `scan.c` using the new version of flex to remove any buggy artifacts from the old flex. #### Part 24: bison 3.4.1 GNU `bison` is a parser generator. With `m4` and `flex` we can now bootstrap it following https://gitlab.com/giomasce/bison-bootstrap. It's a 3 stage process: 1) Build bison using a handwritten grammar parser in C. 2) Use bison from previous stage on a simplified bison grammar file. 3) Build bison using original grammar file. Finally we have a fully functional `bison` executable. #### Part 25: grep 2.4 GNU `grep` is a pattern matching utility. Is is not immediately needed but will be useful later for autotools. #### Part 26: diffutils 2.7 `diffutils` is useful for comparing two files. It is not immediately needed but is required later for autotools. #### Part 27: coreutils 5.0 `coreutils` is rebuilt against musl. Additional utilities are built including `comm`, `expr`, `date`, `dd`, `sort`, `uname`, and `uniq`. #### Part 28: gawk 3.0.4 `gawk` is the GNU implementation of `awk`, yet another pattern matching and data extraction utility. It is also required for autotools. #### Part 29: perl 5.000 Perl is a general purpose programming language that is especially suitable for text processing. It is essential for autotools build system because automake and some other tools are written in Perl. Perl itself is written in C but ships with some pre-generated files that need perl for processing. To bootstrap Perl we will start with the oldest Perl 5 version which has the fewest number of pregenerated files. We reimplement two remaining perl scripts in awk and use our custom makefile instead of Perl's pre-generated Configure script. At this first step we build `miniperl` which is `perl` without support for loading modules. #### Part 30: perl 5.003 We now use `perl` from the previous stage to recreate pre-generated files that are shipped in perl 5.003. But for now we still need to use handwritten makefile instead of `./Configure` script. #### Part 31: perl 5.004_05 Yet another version of perl.