arm-trusted-firmware/services/std_svc/psci1.0/psci_suspend.c

279 lines
10 KiB
C
Raw Normal View History

/*
* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <assert.h>
#include <bl_common.h>
#include <arch.h>
#include <arch_helpers.h>
#include <context.h>
#include <context_mgmt.h>
#include <cpu_data.h>
#include <debug.h>
#include <platform.h>
#include <runtime_svc.h>
#include <stddef.h>
#include "psci_private.h"
/*******************************************************************************
* This function saves the power state parameter passed in the current PSCI
* cpu_suspend call in the per-cpu data array.
******************************************************************************/
void psci_set_suspend_power_state(unsigned int power_state)
{
set_cpu_data(psci_svc_cpu_data.power_state, power_state);
flush_cpu_data(psci_svc_cpu_data.power_state);
}
/*******************************************************************************
* This function gets the power level till which the current cpu could be
* powered down during a cpu_suspend call. Returns PSCI_INVALID_DATA if the
* power state is invalid.
******************************************************************************/
int psci_get_suspend_pwrlvl(void)
{
unsigned int power_state;
power_state = get_cpu_data(psci_svc_cpu_data.power_state);
return ((power_state == PSCI_INVALID_DATA) ?
power_state : psci_get_pstate_pwrlvl(power_state));
}
/*******************************************************************************
* This function gets the state id of the current cpu from the power state
* parameter saved in the per-cpu data array. Returns PSCI_INVALID_DATA if the
* power state saved is invalid.
******************************************************************************/
int psci_get_suspend_stateid(void)
{
unsigned int power_state;
power_state = get_cpu_data(psci_svc_cpu_data.power_state);
return ((power_state == PSCI_INVALID_DATA) ?
power_state : psci_get_pstate_id(power_state));
}
/*******************************************************************************
* This function gets the state id of the cpu specified by the 'mpidr' parameter
* from the power state parameter saved in the per-cpu data array. Returns
* PSCI_INVALID_DATA if the power state saved is invalid.
******************************************************************************/
int psci_get_suspend_stateid_by_mpidr(unsigned long mpidr)
{
unsigned int power_state;
PSCI: Introduce new platform and CM helper APIs This patch introduces new platform APIs and context management helper APIs to support the new topology framework based on linear core position. This framework will be introduced in the follwoing patch and it removes the assumption that the MPIDR based affinity levels map directly to levels in a power domain tree. The new platforms APIs and context management helpers based on core position are as described below: * plat_my_core_pos() and plat_core_pos_by_mpidr() These 2 new mandatory platform APIs are meant to replace the existing 'platform_get_core_pos()' API. The 'plat_my_core_pos()' API returns the linear index of the calling core and 'plat_core_pos_by_mpidr()' returns the linear index of a core specified by its MPIDR. The latter API will also validate the MPIDR passed as an argument and will return an error code (-1) if an invalid MPIDR is passed as the argument. This enables the caller to safely convert an MPIDR of another core to its linear index without querying the PSCI topology tree e.g. during a call to PSCI CPU_ON. Since the 'plat_core_pos_by_mpidr()' API verifies an MPIDR, which is always platform specific, it is no longer possible to maintain a default implementation of this API. Also it might not be possible for a platform port to verify an MPIDR before the C runtime has been setup or the topology has been initialized. This would prevent 'plat_core_pos_by_mpidr()' from being callable prior to topology setup. As a result, the generic Trusted Firmware code does not call this API before the topology setup has been done. The 'plat_my_core_pos' API should be able to run without a C runtime. Since this API needs to return a core position which is equal to the one returned by 'plat_core_pos_by_mpidr()' API for the corresponding MPIDR, this too cannot have default implementation and is a mandatory API for platform ports. These APIs will be implemented by the ARM reference platform ports later in the patch stack. * plat_get_my_stack() and plat_set_my_stack() These APIs are the stack management APIs which set/return stack addresses appropriate for the calling core. These replace the 'platform_get_stack()' and 'platform_set_stack()' APIs. A default weak MP version and a global UP version of these APIs are provided for the platforms. * Context management helpers based on linear core position A set of new context management(CM) helpers viz cm_get_context_by_index(), cm_set_context_by_index(), cm_init_my_context() and cm_init_context_by_index() are defined which are meant to replace the old helpers which took MPIDR as argument. The old CM helpers are implemented based on the new helpers to allow for code consolidation and will be deprecated once the switch to the new framework is done. Change-Id: I89758632b370c2812973a4b2efdd9b81a41f9b69
2015-04-09 13:40:55 +01:00
power_state = get_cpu_data_by_index(plat_core_pos_by_mpidr(mpidr),
psci_svc_cpu_data.power_state);
return ((power_state == PSCI_INVALID_DATA) ?
power_state : psci_get_pstate_id(power_state));
}
/*******************************************************************************
* Top level handler which is called when a cpu wants to suspend its execution.
* It is assumed that along with suspending the cpu power domain, power domains
* at higher levels until the target power level will be suspended as well.
* It finds the highest level where a domain has to be suspended by traversing
* the node information and then performs generic, architectural, platform
* setup and state management required to suspend that power domain and domains
* below it. * e.g. For a cpu that's to be suspended, it could mean programming
* the power controller whereas for a cluster that's to be suspended, it will
* call the platform specific code which will disable coherency at the
* interconnect level if the cpu is the last in the cluster and also the
* program the power controller.
*
* All the required parameter checks are performed at the beginning and after
* the state transition has been done, no further error is expected and it is
* not possible to undo any of the actions taken beyond that point.
******************************************************************************/
void psci_cpu_suspend_start(entry_point_info_t *ep,
int end_pwrlvl)
{
int skip_wfi = 0;
mpidr_pwr_map_nodes_t mpidr_nodes;
unsigned int max_phys_off_pwrlvl;
unsigned long psci_entrypoint;
/*
* This function must only be called on platforms where the
* CPU_SUSPEND platform hooks have been implemented.
*/
assert(psci_plat_pm_ops->pwr_domain_suspend &&
psci_plat_pm_ops->pwr_domain_suspend_finish);
/*
* Collect the pointers to the nodes in the topology tree for
* each power domain instance in the mpidr. If this function does
* not return successfully then either the mpidr or the power
* levels are incorrect. Either way, this an internal TF error
* therefore assert.
*/
if (psci_get_pwr_map_nodes(read_mpidr_el1() & MPIDR_AFFINITY_MASK,
MPIDR_AFFLVL0, end_pwrlvl, mpidr_nodes) != PSCI_E_SUCCESS)
assert(0);
/*
* This function acquires the lock corresponding to each power
* level so that by the time all locks are taken, the system topology
* is snapshot and state management can be done safely.
*/
psci_acquire_pwr_domain_locks(MPIDR_AFFLVL0,
end_pwrlvl,
mpidr_nodes);
/*
* We check if there are any pending interrupts after the delay
* introduced by lock contention to increase the chances of early
* detection that a wake-up interrupt has fired.
*/
if (read_isr_el1()) {
skip_wfi = 1;
goto exit;
}
/*
* Call the cpu suspend handler registered by the Secure Payload
* Dispatcher to let it do any bookeeping. If the handler encounters an
* error, it's expected to assert within
*/
if (psci_spd_pm && psci_spd_pm->svc_suspend)
psci_spd_pm->svc_suspend(0);
/*
* This function updates the state of each power domain instance
* corresponding to the mpidr in the range of power levels
* specified.
*/
psci_do_state_coordination(MPIDR_AFFLVL0,
end_pwrlvl,
mpidr_nodes,
PSCI_STATE_SUSPEND);
max_phys_off_pwrlvl = psci_find_max_phys_off_pwrlvl(MPIDR_AFFLVL0,
end_pwrlvl,
mpidr_nodes);
assert(max_phys_off_pwrlvl != PSCI_INVALID_DATA);
/*
* Store the re-entry information for the non-secure world.
*/
PSCI: Introduce new platform and CM helper APIs This patch introduces new platform APIs and context management helper APIs to support the new topology framework based on linear core position. This framework will be introduced in the follwoing patch and it removes the assumption that the MPIDR based affinity levels map directly to levels in a power domain tree. The new platforms APIs and context management helpers based on core position are as described below: * plat_my_core_pos() and plat_core_pos_by_mpidr() These 2 new mandatory platform APIs are meant to replace the existing 'platform_get_core_pos()' API. The 'plat_my_core_pos()' API returns the linear index of the calling core and 'plat_core_pos_by_mpidr()' returns the linear index of a core specified by its MPIDR. The latter API will also validate the MPIDR passed as an argument and will return an error code (-1) if an invalid MPIDR is passed as the argument. This enables the caller to safely convert an MPIDR of another core to its linear index without querying the PSCI topology tree e.g. during a call to PSCI CPU_ON. Since the 'plat_core_pos_by_mpidr()' API verifies an MPIDR, which is always platform specific, it is no longer possible to maintain a default implementation of this API. Also it might not be possible for a platform port to verify an MPIDR before the C runtime has been setup or the topology has been initialized. This would prevent 'plat_core_pos_by_mpidr()' from being callable prior to topology setup. As a result, the generic Trusted Firmware code does not call this API before the topology setup has been done. The 'plat_my_core_pos' API should be able to run without a C runtime. Since this API needs to return a core position which is equal to the one returned by 'plat_core_pos_by_mpidr()' API for the corresponding MPIDR, this too cannot have default implementation and is a mandatory API for platform ports. These APIs will be implemented by the ARM reference platform ports later in the patch stack. * plat_get_my_stack() and plat_set_my_stack() These APIs are the stack management APIs which set/return stack addresses appropriate for the calling core. These replace the 'platform_get_stack()' and 'platform_set_stack()' APIs. A default weak MP version and a global UP version of these APIs are provided for the platforms. * Context management helpers based on linear core position A set of new context management(CM) helpers viz cm_get_context_by_index(), cm_set_context_by_index(), cm_init_my_context() and cm_init_context_by_index() are defined which are meant to replace the old helpers which took MPIDR as argument. The old CM helpers are implemented based on the new helpers to allow for code consolidation and will be deprecated once the switch to the new framework is done. Change-Id: I89758632b370c2812973a4b2efdd9b81a41f9b69
2015-04-09 13:40:55 +01:00
cm_init_my_context(ep);
/* Set the secure world (EL3) re-entry point after BL1 */
psci_entrypoint = (unsigned long) psci_cpu_suspend_finish_entry;
/*
* Arch. management. Perform the necessary steps to flush all
* cpu caches.
*/
psci_do_pwrdown_cache_maintenance(max_phys_off_pwrlvl);
/*
* Plat. management: Allow the platform to perform the
* necessary actions to turn off this cpu e.g. set the
* platform defined mailbox with the psci entrypoint,
* program the power controller etc.
*/
psci_plat_pm_ops->pwr_domain_suspend(psci_entrypoint,
max_phys_off_pwrlvl);
exit:
/*
* Release the locks corresponding to each power level in the
* reverse order to which they were acquired.
*/
psci_release_pwr_domain_locks(MPIDR_AFFLVL0,
end_pwrlvl,
mpidr_nodes);
if (!skip_wfi)
psci_power_down_wfi();
}
/*******************************************************************************
* The following functions finish an earlier suspend request. They
* are called by the common finisher routine in psci_common.c.
******************************************************************************/
void psci_cpu_suspend_finish(pwr_map_node_t *node[], int pwrlvl)
{
int32_t suspend_level;
uint64_t counter_freq;
assert(node[pwrlvl]->level == pwrlvl);
/* Ensure we have been woken up from a suspended state */
assert(psci_get_state(node[MPIDR_AFFLVL0]) == PSCI_STATE_SUSPEND);
/*
* Plat. management: Perform the platform specific actions
* before we change the state of the cpu e.g. enabling the
* gic or zeroing the mailbox register. If anything goes
* wrong then assert as there is no way to recover from this
* situation.
*/
psci_plat_pm_ops->pwr_domain_suspend_finish(pwrlvl);
/*
* Arch. management: Enable the data cache, manage stack memory and
* restore the stashed EL3 architectural context from the 'cpu_context'
* structure for this cpu.
*/
psci_do_pwrup_cache_maintenance();
/* Re-init the cntfrq_el0 register */
counter_freq = plat_get_syscnt_freq();
write_cntfrq_el0(counter_freq);
/*
* Call the cpu suspend finish handler registered by the Secure Payload
* Dispatcher to let it do any bookeeping. If the handler encounters an
* error, it's expected to assert within
*/
if (psci_spd_pm && psci_spd_pm->svc_suspend) {
suspend_level = psci_get_suspend_pwrlvl();
assert (suspend_level != PSCI_INVALID_DATA);
psci_spd_pm->svc_suspend_finish(suspend_level);
}
/* Invalidate the suspend context for the node */
psci_set_suspend_power_state(PSCI_INVALID_DATA);
/*
* Generic management: Now we just need to retrieve the
* information that we had stashed away during the suspend
* call to set this cpu on its way.
*/
cm_prepare_el3_exit(NON_SECURE);
/* Clean caches before re-entering normal world */
dcsw_op_louis(DCCSW);
}