arm-trusted-firmware/services/std_svc/psci/psci_common.c

624 lines
21 KiB
C
Raw Normal View History

2013-10-25 09:08:21 +01:00
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
2013-10-25 09:08:21 +01:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
2013-10-25 09:08:21 +01:00
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
#include <context.h>
#include <context_mgmt.h>
#include <debug.h>
#include <platform.h>
#include <string.h>
#include "psci_private.h"
2013-10-25 09:08:21 +01:00
/*
* SPD power management operations, expected to be supplied by the registered
* SPD on successful SP initialization
*/
const spd_pm_ops_t *psci_spd_pm;
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* Grand array that holds the platform's topology information for state
* management of affinity instances. Each node (aff_map_node) in the array
* corresponds to an affinity instance e.g. cluster, cpu within an mpidr
******************************************************************************/
aff_map_node_t psci_aff_map[PSCI_NUM_AFFS]
#if USE_COHERENT_MEM
__attribute__ ((section("tzfw_coherent_mem")))
#endif
;
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* Pointer to functions exported by the platform to complete power mgmt. ops
******************************************************************************/
const plat_pm_ops_t *psci_plat_pm_ops;
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* This function is passed an array of pointers to affinity level nodes in the
* topology tree for an mpidr. It iterates through the nodes to find the highest
* affinity level which is marked as physically powered off.
******************************************************************************/
uint32_t psci_find_max_phys_off_afflvl(uint32_t start_afflvl,
uint32_t end_afflvl,
aff_map_node_t *mpidr_nodes[])
{
uint32_t max_afflvl = PSCI_INVALID_DATA;
for (; start_afflvl <= end_afflvl; start_afflvl++) {
if (mpidr_nodes[start_afflvl] == NULL)
continue;
if (psci_get_phys_state(mpidr_nodes[start_afflvl]) ==
PSCI_STATE_OFF)
max_afflvl = start_afflvl;
}
return max_afflvl;
}
/*******************************************************************************
* This function saves the highest affinity level which is in OFF state. The
* affinity instance with which the level is associated is determined by the
* caller.
******************************************************************************/
void psci_set_max_phys_off_afflvl(uint32_t afflvl)
{
set_cpu_data(psci_svc_cpu_data.max_phys_off_afflvl, afflvl);
/*
* Ensure that the saved value is flushed to main memory and any
* speculatively pre-fetched stale copies are invalidated from the
* caches of other cpus in the same coherency domain. This ensures that
* the value can be safely read irrespective of the state of the data
* cache.
*/
flush_cpu_data(psci_svc_cpu_data.max_phys_off_afflvl);
}
/*******************************************************************************
* This function reads the saved highest affinity level which is in OFF
* state. The affinity instance with which the level is associated is determined
* by the caller.
******************************************************************************/
uint32_t psci_get_max_phys_off_afflvl(void)
{
/*
* Ensure that the last update of this value in this cpu's cache is
* flushed to main memory and any speculatively pre-fetched stale copies
* are invalidated from the caches of other cpus in the same coherency
* domain. This ensures that the value is always read from the main
* memory when it was written before the data cache was enabled.
*/
flush_cpu_data(psci_svc_cpu_data.max_phys_off_afflvl);
return get_cpu_data(psci_svc_cpu_data.max_phys_off_afflvl);
}
/*******************************************************************************
* Routine to return the maximum affinity level to traverse to after a cpu has
* been physically powered up. It is expected to be called immediately after
* reset from assembler code.
******************************************************************************/
int get_power_on_target_afflvl()
{
int afflvl;
#if DEBUG
unsigned int state;
aff_map_node_t *node;
/* Retrieve our node from the topology tree */
node = psci_get_aff_map_node(read_mpidr_el1() & MPIDR_AFFINITY_MASK,
MPIDR_AFFLVL0);
assert(node);
/*
* Sanity check the state of the cpu. It should be either suspend or "on
* pending"
*/
psci: fix affinity level upgrade issue The psci implementation does not track target affinity level requests specified during cpu_suspend calls correctly as per the following example. 1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0 2. Only the cpu0.cluster0 is powered down while cluster0 remains powered up 3. cpu1.cluster0 calls cpu_off to power itself down to highest possible affinity level 4. cluster0 will be powered off even though cpu0.cluster0 does not allow cluster shutdown This patch introduces reference counts at affinity levels > 0 to track the number of cpus which want an affinity instance at level X to remain powered up. This instance can be turned off only if its reference count is 0. Cpus still undergo the normal state transitions (ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be either ON or OFF depending upon their reference count. The above issue is thus fixed as follows: 1. cluster0's reference count is incremented by two when cpu0 and cpu1 are initially powered on. 2. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0. This does not affect the cluster0 reference count. 3. Only the cpu0.cluster0 is powered down while cluster0 remains powered up as it has a non-zero reference count. 4. cpu1.cluster0 call cpu_off to power itself down to highest possible affinity level. This decrements the cluster0 reference count. 5. cluster0 is still not powered off since its reference count will at least be 1 due to the restriction placed by cpu0. Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9
2013-12-05 16:33:10 +00:00
state = psci_get_state(node);
assert(state == PSCI_STATE_SUSPEND || state == PSCI_STATE_ON_PENDING);
#endif
/*
* Assume that this cpu was suspended and retrieve its target affinity
* level. If it is invalid then it could only have been turned off
* earlier. get_max_afflvl() will return the highest affinity level a
* cpu can be turned off to.
*/
afflvl = psci_get_suspend_afflvl();
if (afflvl == PSCI_INVALID_DATA)
afflvl = get_max_afflvl();
return afflvl;
}
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* Simple routine to retrieve the maximum affinity level supported by the
* platform and check that it makes sense.
******************************************************************************/
int get_max_afflvl(void)
2013-10-25 09:08:21 +01:00
{
int aff_lvl;
aff_lvl = plat_get_max_afflvl();
assert(aff_lvl <= MPIDR_MAX_AFFLVL && aff_lvl >= MPIDR_AFFLVL0);
return aff_lvl;
}
/*******************************************************************************
* Simple routine to set the id of an affinity instance at a given level in the
* mpidr.
******************************************************************************/
unsigned long mpidr_set_aff_inst(unsigned long mpidr,
unsigned char aff_inst,
int aff_lvl)
{
unsigned long aff_shift;
assert(aff_lvl <= MPIDR_AFFLVL3);
/*
* Decide the number of bits to shift by depending upon
* the affinity level
*/
aff_shift = get_afflvl_shift(aff_lvl);
/* Clear the existing affinity instance & set the new one*/
mpidr &= ~(MPIDR_AFFLVL_MASK << aff_shift);
mpidr |= aff_inst << aff_shift;
return mpidr;
}
/*******************************************************************************
* This function sanity checks a range of affinity levels.
******************************************************************************/
int psci_check_afflvl_range(int start_afflvl, int end_afflvl)
{
/* Sanity check the parameters passed */
if (end_afflvl > get_max_afflvl())
return PSCI_E_INVALID_PARAMS;
if (start_afflvl < MPIDR_AFFLVL0)
return PSCI_E_INVALID_PARAMS;
if (end_afflvl < start_afflvl)
return PSCI_E_INVALID_PARAMS;
return PSCI_E_SUCCESS;
}
/*******************************************************************************
* This function is passed an array of pointers to affinity level nodes in the
* topology tree for an mpidr and the state which each node should transition
* to. It updates the state of each node between the specified affinity levels.
******************************************************************************/
void psci_do_afflvl_state_mgmt(uint32_t start_afflvl,
uint32_t end_afflvl,
aff_map_node_t *mpidr_nodes[],
uint32_t state)
{
uint32_t level;
for (level = start_afflvl; level <= end_afflvl; level++) {
if (mpidr_nodes[level] == NULL)
continue;
psci_set_state(mpidr_nodes[level], state);
}
}
/*******************************************************************************
* This function is passed an array of pointers to affinity level nodes in the
* topology tree for an mpidr. It picks up locks for each affinity level bottom
* up in the range specified.
******************************************************************************/
void psci_acquire_afflvl_locks(int start_afflvl,
int end_afflvl,
aff_map_node_t *mpidr_nodes[])
{
int level;
for (level = start_afflvl; level <= end_afflvl; level++) {
if (mpidr_nodes[level] == NULL)
continue;
psci_lock_get(mpidr_nodes[level]);
}
}
/*******************************************************************************
* This function is passed an array of pointers to affinity level nodes in the
* topology tree for an mpidr. It releases the lock for each affinity level top
* down in the range specified.
******************************************************************************/
void psci_release_afflvl_locks(int start_afflvl,
int end_afflvl,
aff_map_node_t *mpidr_nodes[])
{
int level;
for (level = end_afflvl; level >= start_afflvl; level--) {
if (mpidr_nodes[level] == NULL)
continue;
psci_lock_release(mpidr_nodes[level]);
}
}
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* Simple routine to determine whether an affinity instance at a given level
* in an mpidr exists or not.
******************************************************************************/
int psci_validate_mpidr(unsigned long mpidr, int level)
{
aff_map_node_t *node;
2013-10-25 09:08:21 +01:00
node = psci_get_aff_map_node(mpidr, level);
if (node && (node->state & PSCI_AFF_PRESENT))
return PSCI_E_SUCCESS;
else
return PSCI_E_INVALID_PARAMS;
}
/*******************************************************************************
* This function determines the full entrypoint information for the requested
* PSCI entrypoint on power on/resume and returns it.
2013-10-25 09:08:21 +01:00
******************************************************************************/
int psci_get_ns_ep_info(entry_point_info_t *ep,
uint64_t entrypoint, uint64_t context_id)
2013-10-25 09:08:21 +01:00
{
uint32_t ep_attr, mode, sctlr, daif, ee;
uint32_t ns_scr_el3 = read_scr_el3();
uint32_t ns_sctlr_el1 = read_sctlr_el1();
2013-10-25 09:08:21 +01:00
sctlr = ns_scr_el3 & SCR_HCE_BIT ? read_sctlr_el2() : ns_sctlr_el1;
ee = 0;
2013-10-25 09:08:21 +01:00
ep_attr = NON_SECURE | EP_ST_DISABLE;
if (sctlr & SCTLR_EE_BIT) {
ep_attr |= EP_EE_BIG;
ee = 1;
}
SET_PARAM_HEAD(ep, PARAM_EP, VERSION_1, ep_attr);
2013-10-25 09:08:21 +01:00
ep->pc = entrypoint;
memset(&ep->args, 0, sizeof(ep->args));
ep->args.arg0 = context_id;
2013-10-25 09:08:21 +01:00
/*
* Figure out whether the cpu enters the non-secure address space
* in aarch32 or aarch64
*/
if (ns_scr_el3 & SCR_RW_BIT) {
2013-10-25 09:08:21 +01:00
/*
* Check whether a Thumb entry point has been provided for an
* aarch64 EL
*/
if (entrypoint & 0x1)
return PSCI_E_INVALID_PARAMS;
mode = ns_scr_el3 & SCR_HCE_BIT ? MODE_EL2 : MODE_EL1;
2013-10-25 09:08:21 +01:00
ep->spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
2013-10-25 09:08:21 +01:00
} else {
mode = ns_scr_el3 & SCR_HCE_BIT ? MODE32_hyp : MODE32_svc;
2013-10-25 09:08:21 +01:00
/*
* TODO: Choose async. exception bits if HYP mode is not
* implemented according to the values of SCR.{AW, FW} bits
*/
daif = DAIF_ABT_BIT | DAIF_IRQ_BIT | DAIF_FIQ_BIT;
ep->spsr = SPSR_MODE32(mode, entrypoint & 0x1, ee, daif);
2013-10-25 09:08:21 +01:00
}
return PSCI_E_SUCCESS;
2013-10-25 09:08:21 +01:00
}
psci: fix affinity level upgrade issue The psci implementation does not track target affinity level requests specified during cpu_suspend calls correctly as per the following example. 1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0 2. Only the cpu0.cluster0 is powered down while cluster0 remains powered up 3. cpu1.cluster0 calls cpu_off to power itself down to highest possible affinity level 4. cluster0 will be powered off even though cpu0.cluster0 does not allow cluster shutdown This patch introduces reference counts at affinity levels > 0 to track the number of cpus which want an affinity instance at level X to remain powered up. This instance can be turned off only if its reference count is 0. Cpus still undergo the normal state transitions (ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be either ON or OFF depending upon their reference count. The above issue is thus fixed as follows: 1. cluster0's reference count is incremented by two when cpu0 and cpu1 are initially powered on. 2. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0. This does not affect the cluster0 reference count. 3. Only the cpu0.cluster0 is powered down while cluster0 remains powered up as it has a non-zero reference count. 4. cpu1.cluster0 call cpu_off to power itself down to highest possible affinity level. This decrements the cluster0 reference count. 5. cluster0 is still not powered off since its reference count will at least be 1 due to the restriction placed by cpu0. Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9
2013-12-05 16:33:10 +00:00
/*******************************************************************************
* This function takes a pointer to an affinity node in the topology tree and
* returns its state. State of a non-leaf node needs to be calculated.
******************************************************************************/
unsigned short psci_get_state(aff_map_node_t *node)
psci: fix affinity level upgrade issue The psci implementation does not track target affinity level requests specified during cpu_suspend calls correctly as per the following example. 1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0 2. Only the cpu0.cluster0 is powered down while cluster0 remains powered up 3. cpu1.cluster0 calls cpu_off to power itself down to highest possible affinity level 4. cluster0 will be powered off even though cpu0.cluster0 does not allow cluster shutdown This patch introduces reference counts at affinity levels > 0 to track the number of cpus which want an affinity instance at level X to remain powered up. This instance can be turned off only if its reference count is 0. Cpus still undergo the normal state transitions (ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be either ON or OFF depending upon their reference count. The above issue is thus fixed as follows: 1. cluster0's reference count is incremented by two when cpu0 and cpu1 are initially powered on. 2. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0. This does not affect the cluster0 reference count. 3. Only the cpu0.cluster0 is powered down while cluster0 remains powered up as it has a non-zero reference count. 4. cpu1.cluster0 call cpu_off to power itself down to highest possible affinity level. This decrements the cluster0 reference count. 5. cluster0 is still not powered off since its reference count will at least be 1 due to the restriction placed by cpu0. Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9
2013-12-05 16:33:10 +00:00
{
#if !USE_COHERENT_MEM
flush_dcache_range((uint64_t) node, sizeof(*node));
#endif
psci: fix affinity level upgrade issue The psci implementation does not track target affinity level requests specified during cpu_suspend calls correctly as per the following example. 1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0 2. Only the cpu0.cluster0 is powered down while cluster0 remains powered up 3. cpu1.cluster0 calls cpu_off to power itself down to highest possible affinity level 4. cluster0 will be powered off even though cpu0.cluster0 does not allow cluster shutdown This patch introduces reference counts at affinity levels > 0 to track the number of cpus which want an affinity instance at level X to remain powered up. This instance can be turned off only if its reference count is 0. Cpus still undergo the normal state transitions (ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be either ON or OFF depending upon their reference count. The above issue is thus fixed as follows: 1. cluster0's reference count is incremented by two when cpu0 and cpu1 are initially powered on. 2. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0. This does not affect the cluster0 reference count. 3. Only the cpu0.cluster0 is powered down while cluster0 remains powered up as it has a non-zero reference count. 4. cpu1.cluster0 call cpu_off to power itself down to highest possible affinity level. This decrements the cluster0 reference count. 5. cluster0 is still not powered off since its reference count will at least be 1 due to the restriction placed by cpu0. Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9
2013-12-05 16:33:10 +00:00
assert(node->level >= MPIDR_AFFLVL0 && node->level <= MPIDR_MAX_AFFLVL);
/* A cpu node just contains the state which can be directly returned */
if (node->level == MPIDR_AFFLVL0)
return (node->state >> PSCI_STATE_SHIFT) & PSCI_STATE_MASK;
/*
* For an affinity level higher than a cpu, the state has to be
* calculated. It depends upon the value of the reference count
* which is managed by each node at the next lower affinity level
* e.g. for a cluster, each cpu increments/decrements the reference
* count. If the reference count is 0 then the affinity level is
* OFF else ON.
*/
if (node->ref_count)
return PSCI_STATE_ON;
else
return PSCI_STATE_OFF;
}
/*******************************************************************************
* This function takes a pointer to an affinity node in the topology tree and
* a target state. State of a non-leaf node needs to be converted to a reference
* count. State of a leaf node can be set directly.
******************************************************************************/
void psci_set_state(aff_map_node_t *node, unsigned short state)
psci: fix affinity level upgrade issue The psci implementation does not track target affinity level requests specified during cpu_suspend calls correctly as per the following example. 1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0 2. Only the cpu0.cluster0 is powered down while cluster0 remains powered up 3. cpu1.cluster0 calls cpu_off to power itself down to highest possible affinity level 4. cluster0 will be powered off even though cpu0.cluster0 does not allow cluster shutdown This patch introduces reference counts at affinity levels > 0 to track the number of cpus which want an affinity instance at level X to remain powered up. This instance can be turned off only if its reference count is 0. Cpus still undergo the normal state transitions (ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be either ON or OFF depending upon their reference count. The above issue is thus fixed as follows: 1. cluster0's reference count is incremented by two when cpu0 and cpu1 are initially powered on. 2. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0. This does not affect the cluster0 reference count. 3. Only the cpu0.cluster0 is powered down while cluster0 remains powered up as it has a non-zero reference count. 4. cpu1.cluster0 call cpu_off to power itself down to highest possible affinity level. This decrements the cluster0 reference count. 5. cluster0 is still not powered off since its reference count will at least be 1 due to the restriction placed by cpu0. Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9
2013-12-05 16:33:10 +00:00
{
assert(node->level >= MPIDR_AFFLVL0 && node->level <= MPIDR_MAX_AFFLVL);
/*
* For an affinity level higher than a cpu, the state is used
* to decide whether the reference count is incremented or
* decremented. Entry into the ON_PENDING state does not have
* effect.
*/
if (node->level > MPIDR_AFFLVL0) {
switch (state) {
case PSCI_STATE_ON:
node->ref_count++;
break;
case PSCI_STATE_OFF:
case PSCI_STATE_SUSPEND:
node->ref_count--;
break;
case PSCI_STATE_ON_PENDING:
/*
* An affinity level higher than a cpu will not undergo
* a state change when it is about to be turned on
*/
return;
default:
assert(0);
}
} else {
node->state &= ~(PSCI_STATE_MASK << PSCI_STATE_SHIFT);
node->state |= (state & PSCI_STATE_MASK) << PSCI_STATE_SHIFT;
}
#if !USE_COHERENT_MEM
flush_dcache_range((uint64_t) node, sizeof(*node));
#endif
psci: fix affinity level upgrade issue The psci implementation does not track target affinity level requests specified during cpu_suspend calls correctly as per the following example. 1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0 2. Only the cpu0.cluster0 is powered down while cluster0 remains powered up 3. cpu1.cluster0 calls cpu_off to power itself down to highest possible affinity level 4. cluster0 will be powered off even though cpu0.cluster0 does not allow cluster shutdown This patch introduces reference counts at affinity levels > 0 to track the number of cpus which want an affinity instance at level X to remain powered up. This instance can be turned off only if its reference count is 0. Cpus still undergo the normal state transitions (ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be either ON or OFF depending upon their reference count. The above issue is thus fixed as follows: 1. cluster0's reference count is incremented by two when cpu0 and cpu1 are initially powered on. 2. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0. This does not affect the cluster0 reference count. 3. Only the cpu0.cluster0 is powered down while cluster0 remains powered up as it has a non-zero reference count. 4. cpu1.cluster0 call cpu_off to power itself down to highest possible affinity level. This decrements the cluster0 reference count. 5. cluster0 is still not powered off since its reference count will at least be 1 due to the restriction placed by cpu0. Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9
2013-12-05 16:33:10 +00:00
}
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* An affinity level could be on, on_pending, suspended or off. These are the
* logical states it can be in. Physically either it is off or on. When it is in
* the state on_pending then it is about to be turned on. It is not possible to
2013-10-25 09:08:21 +01:00
* tell whether that's actually happenned or not. So we err on the side of
* caution & treat the affinity level as being turned off.
******************************************************************************/
unsigned short psci_get_phys_state(aff_map_node_t *node)
2013-10-25 09:08:21 +01:00
{
psci: fix affinity level upgrade issue The psci implementation does not track target affinity level requests specified during cpu_suspend calls correctly as per the following example. 1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0 2. Only the cpu0.cluster0 is powered down while cluster0 remains powered up 3. cpu1.cluster0 calls cpu_off to power itself down to highest possible affinity level 4. cluster0 will be powered off even though cpu0.cluster0 does not allow cluster shutdown This patch introduces reference counts at affinity levels > 0 to track the number of cpus which want an affinity instance at level X to remain powered up. This instance can be turned off only if its reference count is 0. Cpus still undergo the normal state transitions (ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be either ON or OFF depending upon their reference count. The above issue is thus fixed as follows: 1. cluster0's reference count is incremented by two when cpu0 and cpu1 are initially powered on. 2. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0. This does not affect the cluster0 reference count. 3. Only the cpu0.cluster0 is powered down while cluster0 remains powered up as it has a non-zero reference count. 4. cpu1.cluster0 call cpu_off to power itself down to highest possible affinity level. This decrements the cluster0 reference count. 5. cluster0 is still not powered off since its reference count will at least be 1 due to the restriction placed by cpu0. Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9
2013-12-05 16:33:10 +00:00
unsigned int state;
2013-10-25 09:08:21 +01:00
psci: fix affinity level upgrade issue The psci implementation does not track target affinity level requests specified during cpu_suspend calls correctly as per the following example. 1. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0 2. Only the cpu0.cluster0 is powered down while cluster0 remains powered up 3. cpu1.cluster0 calls cpu_off to power itself down to highest possible affinity level 4. cluster0 will be powered off even though cpu0.cluster0 does not allow cluster shutdown This patch introduces reference counts at affinity levels > 0 to track the number of cpus which want an affinity instance at level X to remain powered up. This instance can be turned off only if its reference count is 0. Cpus still undergo the normal state transitions (ON, OFF, ON_PENDING, SUSPEND) but the higher levels can only be either ON or OFF depending upon their reference count. The above issue is thus fixed as follows: 1. cluster0's reference count is incremented by two when cpu0 and cpu1 are initially powered on. 2. cpu0.cluster0 calls cpu_suspend with the target affinity level as 0. This does not affect the cluster0 reference count. 3. Only the cpu0.cluster0 is powered down while cluster0 remains powered up as it has a non-zero reference count. 4. cpu1.cluster0 call cpu_off to power itself down to highest possible affinity level. This decrements the cluster0 reference count. 5. cluster0 is still not powered off since its reference count will at least be 1 due to the restriction placed by cpu0. Change-Id: I433dfe82b946f5f6985b1602c2de87800504f7a9
2013-12-05 16:33:10 +00:00
state = psci_get_state(node);
return get_phys_state(state);
2013-10-25 09:08:21 +01:00
}
/*******************************************************************************
* This function takes an array of pointers to affinity instance nodes in the
* topology tree and calls the physical power on handler for the corresponding
* affinity levels
******************************************************************************/
static void psci_call_power_on_handlers(aff_map_node_t *mpidr_nodes[],
int start_afflvl,
int end_afflvl,
afflvl_power_on_finisher_t *pon_handlers)
{
int level;
aff_map_node_t *node;
for (level = end_afflvl; level >= start_afflvl; level--) {
node = mpidr_nodes[level];
if (node == NULL)
continue;
/*
* If we run into any trouble while powering up an
* affinity instance, then there is no recovery path
* so simply return an error and let the caller take
* care of the situation.
*/
pon_handlers[level](node);
}
}
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* Generic handler which is called when a cpu is physically powered on. It
* traverses through all the affinity levels performing generic, architectural,
2013-10-25 09:08:21 +01:00
* platform setup and state management e.g. for a cluster that's been powered
* on, it will call the platform specific code which will enable coherency at
* the interconnect level. For a cpu it could mean turning on the MMU etc.
*
* The state of all the relevant affinity levels is changed after calling the
* affinity level specific handlers as their actions would depend upon the state
* the affinity level is exiting from.
*
* The affinity level specific handlers are called in descending order i.e. from
* the highest to the lowest affinity level implemented by the platform because
* to turn on affinity level X it is neccesary to turn on affinity level X + 1
* first.
2013-10-25 09:08:21 +01:00
******************************************************************************/
void psci_afflvl_power_on_finish(int start_afflvl,
int end_afflvl,
afflvl_power_on_finisher_t *pon_handlers)
2013-10-25 09:08:21 +01:00
{
mpidr_aff_map_nodes_t mpidr_nodes;
int rc;
unsigned int max_phys_off_afflvl;
2013-10-25 09:08:21 +01:00
/*
* Collect the pointers to the nodes in the topology tree for
* each affinity instance in the mpidr. If this function does
* not return successfully then either the mpidr or the affinity
* levels are incorrect. Either case is an irrecoverable error.
2013-10-25 09:08:21 +01:00
*/
rc = psci_get_aff_map_nodes(read_mpidr_el1() & MPIDR_AFFINITY_MASK,
start_afflvl,
end_afflvl,
mpidr_nodes);
if (rc != PSCI_E_SUCCESS)
panic();
2013-10-25 09:08:21 +01:00
/*
* This function acquires the lock corresponding to each affinity
* level so that by the time all locks are taken, the system topology
* is snapshot and state management can be done safely.
2013-10-25 09:08:21 +01:00
*/
psci_acquire_afflvl_locks(start_afflvl,
end_afflvl,
mpidr_nodes);
2013-10-25 09:08:21 +01:00
max_phys_off_afflvl = psci_find_max_phys_off_afflvl(start_afflvl,
end_afflvl,
mpidr_nodes);
assert(max_phys_off_afflvl != PSCI_INVALID_DATA);
/*
* Stash the highest affinity level that will come out of the OFF or
* SUSPEND states.
*/
psci_set_max_phys_off_afflvl(max_phys_off_afflvl);
2013-10-25 09:08:21 +01:00
/* Perform generic, architecture and platform specific handling */
psci_call_power_on_handlers(mpidr_nodes,
start_afflvl,
end_afflvl,
pon_handlers);
2013-10-25 09:08:21 +01:00
/*
* This function updates the state of each affinity instance
* corresponding to the mpidr in the range of affinity levels
* specified.
*/
psci_do_afflvl_state_mgmt(start_afflvl,
end_afflvl,
mpidr_nodes,
PSCI_STATE_ON);
/*
* Invalidate the entry for the highest affinity level stashed earlier.
* This ensures that any reads of this variable outside the power
* up/down sequences return PSCI_INVALID_DATA
*/
psci_set_max_phys_off_afflvl(PSCI_INVALID_DATA);
/*
* This loop releases the lock corresponding to each affinity level
* in the reverse order to which they were acquired.
*/
psci_release_afflvl_locks(start_afflvl,
end_afflvl,
mpidr_nodes);
2013-10-25 09:08:21 +01:00
}
/*******************************************************************************
* This function initializes the set of hooks that PSCI invokes as part of power
* management operation. The power management hooks are expected to be provided
* by the SPD, after it finishes all its initialization
******************************************************************************/
void psci_register_spd_pm_hook(const spd_pm_ops_t *pm)
{
assert(pm);
psci_spd_pm = pm;
if (pm->svc_migrate)
psci_caps |= define_psci_cap(PSCI_MIG_AARCH64);
if (pm->svc_migrate_info)
psci_caps |= define_psci_cap(PSCI_MIG_INFO_UP_CPU_AARCH64)
| define_psci_cap(PSCI_MIG_INFO_TYPE);
}
/*******************************************************************************
* This function invokes the migrate info hook in the spd_pm_ops. It performs
* the necessary return value validation. If the Secure Payload is UP and
* migrate capable, it returns the mpidr of the CPU on which the Secure payload
* is resident through the mpidr parameter. Else the value of the parameter on
* return is undefined.
******************************************************************************/
int psci_spd_migrate_info(uint64_t *mpidr)
{
int rc;
if (!psci_spd_pm || !psci_spd_pm->svc_migrate_info)
return PSCI_E_NOT_SUPPORTED;
rc = psci_spd_pm->svc_migrate_info(mpidr);
assert(rc == PSCI_TOS_UP_MIG_CAP || rc == PSCI_TOS_NOT_UP_MIG_CAP \
|| rc == PSCI_TOS_NOT_PRESENT_MP || rc == PSCI_E_NOT_SUPPORTED);
return rc;
}
/*******************************************************************************
* This function prints the state of all affinity instances present in the
* system
******************************************************************************/
void psci_print_affinity_map(void)
{
#if LOG_LEVEL >= LOG_LEVEL_INFO
aff_map_node_t *node;
unsigned int idx;
/* This array maps to the PSCI_STATE_X definitions in psci.h */
static const char *psci_state_str[] = {
"ON",
"OFF",
"ON_PENDING",
"SUSPEND"
};
INFO("PSCI Affinity Map:\n");
for (idx = 0; idx < PSCI_NUM_AFFS ; idx++) {
node = &psci_aff_map[idx];
if (!(node->state & PSCI_AFF_PRESENT)) {
continue;
}
INFO(" AffInst: Level %u, MPID 0x%lx, State %s\n",
node->level, node->mpidr,
psci_state_str[psci_get_state(node)]);
}
#endif
}