andrius
/
arm-trusted-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
arm-trusted-firmware/bl2/aarch64/bl2_el3_entrypoint.S

108 lines
2.8 KiB
ArmAsm
Raw Normal View History

bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
/*
Prevent speculative execution past ERET Even though ERET always causes a jump to another address, aarch64 CPUs speculatively execute following instructions as if the ERET instruction was not a jump instruction. The speculative execution does not cross privilege-levels (to the jump target as one would expect), but it continues on the kernel privilege level as if the ERET instruction did not change the control flow - thus execution anything that is accidentally linked after the ERET instruction. Later, the results of this speculative execution are always architecturally discarded, however they can leak data using microarchitectural side channels. This speculative execution is very reliable (seems to be unconditional) and it manages to complete even relatively performance-heavy operations (e.g. multiple dependent fetches from uncached memory). This was fixed in Linux, FreeBSD, OpenBSD and Optee OS: https://github.com/torvalds/linux/commit/679db70801da9fda91d26caf13bf5b5ccc74e8e8 https://github.com/freebsd/freebsd/commit/29fb48ace4186a41c409fde52bcf4216e9e50b61 https://github.com/openbsd/src/commit/3a08873ece1cb28ace89fd65e8f3c1375cc98de2 https://github.com/OP-TEE/optee_os/commit/abfd092aa19f9c0251e3d5551e2d68a9ebcfec8a It is demonstrated in a SafeSide example: https://github.com/google/safeside/blob/master/demos/eret_hvc_smc_wrapper.cc https://github.com/google/safeside/blob/master/kernel_modules/kmod_eret_hvc_smc/eret_hvc_smc_module.c Signed-off-by: Anthony Steinhauser <asteinhauser@google.com> Change-Id: Iead39b0b9fb4b8d8b5609daaa8be81497ba63a0f
2020-01-07 23:44:06 +00:00
* Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
*
* SPDX-License-Identifier: BSD-3-Clause
*/
BL2_AT_EL3: add PIE support This implementation simply mimics that of BL31. I did not implement the ENABLE_PIE support for BL2_IN_XIP_MEM=1 case. It would make the linker script a bit uglier. Change-Id: If3215abd99f2758dfb232e44b50320d04eba808b Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-17 04:45:02 +00:00
#include <platform_def.h>
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
#include <arch.h>
#include <asm_macros.S>
Sanitise includes across codebase Enforce full include path for includes. Deprecate old paths. The following folders inside include/lib have been left unchanged: - include/lib/cpus/${ARCH} - include/lib/el3_runtime/${ARCH} The reason for this change is that having a global namespace for includes isn't a good idea. It defeats one of the advantages of having folders and it introduces problems that are sometimes subtle (because you may not know the header you are actually including if there are two of them). For example, this patch had to be created because two headers were called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform to avoid collision."). More recently, this patch has had similar problems: 46f9b2c3a282 ("drivers: add tzc380 support"). This problem was introduced in commit 4ecca33988b9 ("Move include and source files to logical locations"). At that time, there weren't too many headers so it wasn't a real issue. However, time has shown that this creates problems. Platforms that want to preserve the way they include headers may add the removed paths to PLAT_INCLUDES, but this is discouraged. Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2018-12-14 00:18:21 +00:00
#include <common/bl_common.h>
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
#include <el3_common_macros.S>
.globl bl2_entrypoint
.globl bl2_el3_run_image
.globl bl2_run_next_image
BL2_AT_EL3: add PIE support This implementation simply mimics that of BL31. I did not implement the ENABLE_PIE support for BL2_IN_XIP_MEM=1 case. It would make the linker script a bit uglier. Change-Id: If3215abd99f2758dfb232e44b50320d04eba808b Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-17 04:45:02 +00:00
#if BL2_IN_XIP_MEM
#define FIXUP_SIZE 0
#else
#define FIXUP_SIZE ((BL2_LIMIT) - (BL2_BASE))
#endif
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
func bl2_entrypoint
/* Save arguments x0-x3 from previous Boot loader */
mov x20, x0
mov x21, x1
mov x22, x2
mov x23, x3
el3_entrypoint_common \
_init_sctlr=1 \
_warm_boot_mailbox=!PROGRAMMABLE_RESET_ADDRESS \
_secondary_cold_boot=!COLD_BOOT_SINGLE_CPU \
_init_memory=1 \
_init_c_runtime=1 \
PIE: make call to GDT relocation fixup generalized When a Firmware is complied as Position Independent Executable it needs to request GDT fixup by passing size of the memory region to el3_entrypoint_common macro. The Global descriptor table fixup will be done early on during cold boot process of primary core. Currently only BL31 supports PIE, but in future when BL2_AT_EL3 will be compiled as PIE, it can simply pass fixup size to the common el3 entrypoint macro to fixup GDT. The reason for this patch was to overcome the bug introduced by SHA 330ead806 which called fixup routine for each core causing re-initializing of global pointers thus overwriting any changes done by the previous core. Change-Id: I55c792cc3ea9e7eef34c2e4653afd04572c4f055 Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
2019-11-26 11:34:17 +00:00
_exception_vectors=bl2_el3_exceptions \
BL2_AT_EL3: add PIE support This implementation simply mimics that of BL31. I did not implement the ENABLE_PIE support for BL2_IN_XIP_MEM=1 case. It would make the linker script a bit uglier. Change-Id: If3215abd99f2758dfb232e44b50320d04eba808b Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2020-01-17 04:45:02 +00:00
_pie_fixup_size=FIXUP_SIZE
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
BL2_AT_EL3: Enable pointer authentication support The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 | | | 0.2% | | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 | | | 3.1% | | 0.9% | | +----------------------------+-------+-------+-------+--------+ The results are valid for the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ BL2_AT_EL3=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-31 17:40:44 +00:00
/* ---------------------------------------------
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
* Restore parameters of boot rom
BL2_AT_EL3: Enable pointer authentication support The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 | | | 0.2% | | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 | | | 3.1% | | 0.9% | | +----------------------------+-------+-------+-------+--------+ The results are valid for the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ BL2_AT_EL3=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-31 17:40:44 +00:00
* ---------------------------------------------
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
*/
mov x0, x20
mov x1, x21
mov x2, x22
mov x3, x23
BL2_AT_EL3: Enable pointer authentication support The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 | | | 0.2% | | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 | | | 3.1% | | 0.9% | | +----------------------------+-------+-------+-------+--------+ The results are valid for the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ BL2_AT_EL3=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-31 17:40:44 +00:00
/* ---------------------------------------------
* Perform BL2 setup
* ---------------------------------------------
*/
bl bl2_el3_setup
#if ENABLE_PAUTH
Add support for Branch Target Identification This patch adds the functionality needed for platforms to provide Branch Target Identification (BTI) extension, introduced to AArch64 in Armv8.5-A by adding BTI instruction used to mark valid targets for indirect branches. The patch sets new GP bit [50] to the stage 1 Translation Table Block and Page entries to denote guarded EL3 code pages which will cause processor to trap instructions in protected pages trying to perform an indirect branch to any instruction other than BTI. BTI feature is selected by BRANCH_PROTECTION option which supersedes the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication and is disabled by default. Enabling BTI requires compiler support and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0. The assembly macros and helpers are modified to accommodate the BTI instruction. This is an experimental feature. Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3 is now made as an internal flag and BRANCH_PROTECTION flag should be used instead to enable Pointer Authentication. Note. USE_LIBROM=1 option is currently not supported. Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2019-05-24 12:17:09 +01:00
/* ---------------------------------------------
Refactor ARMv8.3 Pointer Authentication support code This patch provides the following features and makes modifications listed below: - Individual APIAKey key generation for each CPU. - New key generation on every BL31 warm boot and TSP CPU On event. - Per-CPU storage of APIAKey added in percpu_data[] of cpu_data structure. - `plat_init_apiakey()` function replaced with `plat_init_apkey()` which returns 128-bit value and uses Generic timer physical counter value to increase the randomness of the generated key. The new function can be used for generation of all ARMv8.3-PAuth keys - ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`. - New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively; pauth_disable_el1()` and `pauth_disable_el3()` functions disable PAuth for EL1 and EL3 respectively; `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from cpu-data structure. - Combined `save_gp_pauth_registers()` function replaces calls to `save_gp_registers()` and `pauth_context_save()`; `restore_gp_pauth_registers()` replaces `pauth_context_restore()` and `restore_gp_registers()` calls. - `restore_gp_registers_eret()` function removed with corresponding code placed in `el3_exit()`. - Fixed the issue when `pauth_t pauth_ctx` structure allocated space for 12 uint64_t PAuth registers instead of 10 by removal of macro CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h` and assigning its value to CTX_PAUTH_REGS_END. - Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions in `msr spsel` instruction instead of hard-coded values. - Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI. Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211 Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2019-09-13 14:11:59 +01:00
* Program APIAKey_EL1 and enable pointer authentication.
Add support for Branch Target Identification This patch adds the functionality needed for platforms to provide Branch Target Identification (BTI) extension, introduced to AArch64 in Armv8.5-A by adding BTI instruction used to mark valid targets for indirect branches. The patch sets new GP bit [50] to the stage 1 Translation Table Block and Page entries to denote guarded EL3 code pages which will cause processor to trap instructions in protected pages trying to perform an indirect branch to any instruction other than BTI. BTI feature is selected by BRANCH_PROTECTION option which supersedes the previous ENABLE_PAUTH used for Armv8.3-A Pointer Authentication and is disabled by default. Enabling BTI requires compiler support and was tested with GCC versions 9.0.0, 9.0.1 and 10.0.0. The assembly macros and helpers are modified to accommodate the BTI instruction. This is an experimental feature. Note. The previous ENABLE_PAUTH build option to enable PAuth in EL3 is now made as an internal flag and BRANCH_PROTECTION flag should be used instead to enable Pointer Authentication. Note. USE_LIBROM=1 option is currently not supported. Change-Id: Ifaf4438609b16647dc79468b70cd1f47a623362e Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2019-05-24 12:17:09 +01:00
* ---------------------------------------------
*/
Refactor ARMv8.3 Pointer Authentication support code This patch provides the following features and makes modifications listed below: - Individual APIAKey key generation for each CPU. - New key generation on every BL31 warm boot and TSP CPU On event. - Per-CPU storage of APIAKey added in percpu_data[] of cpu_data structure. - `plat_init_apiakey()` function replaced with `plat_init_apkey()` which returns 128-bit value and uses Generic timer physical counter value to increase the randomness of the generated key. The new function can be used for generation of all ARMv8.3-PAuth keys - ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`. - New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively; pauth_disable_el1()` and `pauth_disable_el3()` functions disable PAuth for EL1 and EL3 respectively; `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from cpu-data structure. - Combined `save_gp_pauth_registers()` function replaces calls to `save_gp_registers()` and `pauth_context_save()`; `restore_gp_pauth_registers()` replaces `pauth_context_restore()` and `restore_gp_registers()` calls. - `restore_gp_registers_eret()` function removed with corresponding code placed in `el3_exit()`. - Fixed the issue when `pauth_t pauth_ctx` structure allocated space for 12 uint64_t PAuth registers instead of 10 by removal of macro CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h` and assigning its value to CTX_PAUTH_REGS_END. - Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions in `msr spsel` instruction instead of hard-coded values. - Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI. Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211 Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2019-09-13 14:11:59 +01:00
bl pauth_init_enable_el3
BL2_AT_EL3: Enable pointer authentication support The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 | | | 0.2% | | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 | | | 3.1% | | 0.9% | | +----------------------------+-------+-------+-------+--------+ The results are valid for the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ BL2_AT_EL3=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-31 17:40:44 +00:00
#endif /* ENABLE_PAUTH */
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
/* ---------------------------------------------
* Jump to main function.
* ---------------------------------------------
*/
bl bl2_main
/* ---------------------------------------------
* Should never reach this point.
* ---------------------------------------------
*/
no_ret plat_panic_handler
endfunc bl2_entrypoint
func bl2_run_next_image
mov x20,x0
BL2_AT_EL3: Enable pointer authentication support The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 | | | 0.2% | | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 | | | 3.1% | | 0.9% | | +----------------------------+-------+-------+-------+--------+ The results are valid for the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ BL2_AT_EL3=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-31 17:40:44 +00:00
/* ---------------------------------------------
* MMU needs to be disabled because both BL2 and BL31 execute
* in EL3, and therefore share the same address space.
* BL31 will initialize the address space according to its
* own requirement.
* ---------------------------------------------
*/
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
bl disable_mmu_icache_el3
tlbi alle3
bl bl2_el3_plat_prepare_exit
Refactor ARMv8.3 Pointer Authentication support code This patch provides the following features and makes modifications listed below: - Individual APIAKey key generation for each CPU. - New key generation on every BL31 warm boot and TSP CPU On event. - Per-CPU storage of APIAKey added in percpu_data[] of cpu_data structure. - `plat_init_apiakey()` function replaced with `plat_init_apkey()` which returns 128-bit value and uses Generic timer physical counter value to increase the randomness of the generated key. The new function can be used for generation of all ARMv8.3-PAuth keys - ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`. - New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively; pauth_disable_el1()` and `pauth_disable_el3()` functions disable PAuth for EL1 and EL3 respectively; `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from cpu-data structure. - Combined `save_gp_pauth_registers()` function replaces calls to `save_gp_registers()` and `pauth_context_save()`; `restore_gp_pauth_registers()` replaces `pauth_context_restore()` and `restore_gp_registers()` calls. - `restore_gp_registers_eret()` function removed with corresponding code placed in `el3_exit()`. - Fixed the issue when `pauth_t pauth_ctx` structure allocated space for 12 uint64_t PAuth registers instead of 10 by removal of macro CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h` and assigning its value to CTX_PAUTH_REGS_END. - Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions in `msr spsel` instruction instead of hard-coded values. - Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI. Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211 Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2019-09-13 14:11:59 +01:00
#if ENABLE_PAUTH
BL2_AT_EL3: Enable pointer authentication support The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 | | | 0.2% | | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 | | | 3.1% | | 0.9% | | +----------------------------+-------+-------+-------+--------+ The results are valid for the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ BL2_AT_EL3=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-31 17:40:44 +00:00
/* ---------------------------------------------
Refactor ARMv8.3 Pointer Authentication support code This patch provides the following features and makes modifications listed below: - Individual APIAKey key generation for each CPU. - New key generation on every BL31 warm boot and TSP CPU On event. - Per-CPU storage of APIAKey added in percpu_data[] of cpu_data structure. - `plat_init_apiakey()` function replaced with `plat_init_apkey()` which returns 128-bit value and uses Generic timer physical counter value to increase the randomness of the generated key. The new function can be used for generation of all ARMv8.3-PAuth keys - ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`. - New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively; pauth_disable_el1()` and `pauth_disable_el3()` functions disable PAuth for EL1 and EL3 respectively; `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from cpu-data structure. - Combined `save_gp_pauth_registers()` function replaces calls to `save_gp_registers()` and `pauth_context_save()`; `restore_gp_pauth_registers()` replaces `pauth_context_restore()` and `restore_gp_registers()` calls. - `restore_gp_registers_eret()` function removed with corresponding code placed in `el3_exit()`. - Fixed the issue when `pauth_t pauth_ctx` structure allocated space for 12 uint64_t PAuth registers instead of 10 by removal of macro CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h` and assigning its value to CTX_PAUTH_REGS_END. - Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions in `msr spsel` instruction instead of hard-coded values. - Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI. Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211 Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2019-09-13 14:11:59 +01:00
* Disable pointer authentication before jumping
* to next boot image.
BL2_AT_EL3: Enable pointer authentication support The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 | | | 0.2% | | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 | | | 3.1% | | 0.9% | | +----------------------------+-------+-------+-------+--------+ The results are valid for the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ BL2_AT_EL3=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-31 17:40:44 +00:00
* ---------------------------------------------
*/
Refactor ARMv8.3 Pointer Authentication support code This patch provides the following features and makes modifications listed below: - Individual APIAKey key generation for each CPU. - New key generation on every BL31 warm boot and TSP CPU On event. - Per-CPU storage of APIAKey added in percpu_data[] of cpu_data structure. - `plat_init_apiakey()` function replaced with `plat_init_apkey()` which returns 128-bit value and uses Generic timer physical counter value to increase the randomness of the generated key. The new function can be used for generation of all ARMv8.3-PAuth keys - ARMv8.3-PAuth specific code placed in `lib\extensions\pauth`. - New `pauth_init_enable_el1()` and `pauth_init_enable_el3()` functions generate, program and enable APIAKey_EL1 for EL1 and EL3 respectively; pauth_disable_el1()` and `pauth_disable_el3()` functions disable PAuth for EL1 and EL3 respectively; `pauth_load_bl31_apiakey()` loads saved per-CPU APIAKey_EL1 from cpu-data structure. - Combined `save_gp_pauth_registers()` function replaces calls to `save_gp_registers()` and `pauth_context_save()`; `restore_gp_pauth_registers()` replaces `pauth_context_restore()` and `restore_gp_registers()` calls. - `restore_gp_registers_eret()` function removed with corresponding code placed in `el3_exit()`. - Fixed the issue when `pauth_t pauth_ctx` structure allocated space for 12 uint64_t PAuth registers instead of 10 by removal of macro CTX_PACGAKEY_END from `include/lib/el3_runtime/aarch64/context.h` and assigning its value to CTX_PAUTH_REGS_END. - Use of MODE_SP_ELX and MODE_SP_EL0 macro definitions in `msr spsel` instruction instead of hard-coded values. - Changes in documentation related to ARMv8.3-PAuth and ARMv8.5-BTI. Change-Id: Id18b81cc46f52a783a7e6a09b9f149b6ce803211 Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
2019-09-13 14:11:59 +01:00
bl pauth_disable_el3
BL2_AT_EL3: Enable pointer authentication support The size increase after enabling options related to ARMv8.3-PAuth is: +----------------------------+-------+-------+-------+--------+ | | text | bss | data | rodata | +----------------------------+-------+-------+-------+--------+ | CTX_INCLUDE_PAUTH_REGS = 1 | +44 | +0 | +0 | +0 | | | 0.2% | | | | +----------------------------+-------+-------+-------+--------+ | ENABLE_PAUTH = 1 | +712 | +0 | +16 | +0 | | | 3.1% | | 0.9% | | +----------------------------+-------+-------+-------+--------+ The results are valid for the following build configuration: make PLAT=fvp SPD=tspd DEBUG=1 \ BL2_AT_EL3=1 \ CTX_INCLUDE_PAUTH_REGS=1 \ ENABLE_PAUTH=1 Change-Id: I1c0616e7dea30962a92b4fd113428bc30a018320 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-01-31 17:40:44 +00:00
#endif /* ENABLE_PAUTH */
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
ldp x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET]
msr elr_el3, x0
msr spsr_el3, x1
ldp x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)]
ldp x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)]
ldp x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)]
ldp x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)]
Prevent speculative execution past ERET Even though ERET always causes a jump to another address, aarch64 CPUs speculatively execute following instructions as if the ERET instruction was not a jump instruction. The speculative execution does not cross privilege-levels (to the jump target as one would expect), but it continues on the kernel privilege level as if the ERET instruction did not change the control flow - thus execution anything that is accidentally linked after the ERET instruction. Later, the results of this speculative execution are always architecturally discarded, however they can leak data using microarchitectural side channels. This speculative execution is very reliable (seems to be unconditional) and it manages to complete even relatively performance-heavy operations (e.g. multiple dependent fetches from uncached memory). This was fixed in Linux, FreeBSD, OpenBSD and Optee OS: https://github.com/torvalds/linux/commit/679db70801da9fda91d26caf13bf5b5ccc74e8e8 https://github.com/freebsd/freebsd/commit/29fb48ace4186a41c409fde52bcf4216e9e50b61 https://github.com/openbsd/src/commit/3a08873ece1cb28ace89fd65e8f3c1375cc98de2 https://github.com/OP-TEE/optee_os/commit/abfd092aa19f9c0251e3d5551e2d68a9ebcfec8a It is demonstrated in a SafeSide example: https://github.com/google/safeside/blob/master/demos/eret_hvc_smc_wrapper.cc https://github.com/google/safeside/blob/master/kernel_modules/kmod_eret_hvc_smc/eret_hvc_smc_module.c Signed-off-by: Anthony Steinhauser <asteinhauser@google.com> Change-Id: Iead39b0b9fb4b8d8b5609daaa8be81497ba63a0f
2020-01-07 23:44:06 +00:00
exception_return
bl2-el3: Add BL2_EL3 image This patch enables BL2 to execute at the highest exception level without any dependancy on TF BL1. This enables platforms which already have a non-TF Boot ROM to directly load and execute BL2 and subsequent BL stages without need for BL1. This is not currently possible because BL2 executes at S-EL1 and cannot jump straight to EL3. Change-Id: Ief1efca4598560b1b8c8e61fbe26d1f44e929d69 Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2017-10-30 14:43:43 +00:00
endfunc bl2_run_next_image