arm-trusted-firmware/plat/arm/common/arm_common.mk

135 lines
4.8 KiB
Makefile
Raw Normal View History

Add common ARM and CSS platform code This major change pulls out the common functionality from the FVP and Juno platform ports into the following categories: * (include/)plat/common. Common platform porting functionality that typically may be used by all platforms. * (include/)plat/arm/common. Common platform porting functionality that may be used by all ARM standard platforms. This includes all ARM development platforms like FVP and Juno but may also include non-ARM-owned platforms. * (include/)plat/arm/board/common. Common platform porting functionality for ARM development platforms at the board (off SoC) level. * (include/)plat/arm/css/common. Common platform porting functionality at the ARM Compute SubSystem (CSS) level. Juno is an example of a CSS-based platform. * (include/)plat/arm/soc/common. Common platform porting functionality at the ARM SoC level, which is not already defined at the ARM CSS level. No guarantees are made about the backward compatibility of functionality provided in (include/)plat/arm. Also remove any unnecessary variation between the ARM development platform ports, including: * Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the Juno implementation, which copies the information from BL2 memory instead of expecting it to persist in shared memory. * Unify the TZC configuration. There is no need to add a region for SCP in Juno; it's enough to simply not allow any access to this reserved region. Also set region 0 to provide no access by default instead of assuming this is the case. * Unify the number of memory map regions required for ARM development platforms, although the actual ranges mapped for each platform may be different. For the FVP port, this reduces the mapped peripheral address space. These latter changes will only be observed when the platform ports are migrated to use the new common platform code in subsequent patches. Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8
2015-03-19 18:58:55 +00:00
#
# Copyright (c) 2015, ARM Limited and Contributors. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
#
# Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# Neither the name of ARM nor the names of its contributors may be used
# to endorse or promote products derived from this software without specific
# prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# On ARM standard platorms, the TSP can execute from Trusted SRAM, Trusted
# DRAM (if available) or the TZC secured area of DRAM.
# Trusted SRAM is the default.
ARM_TSP_RAM_LOCATION := tsram
ifeq (${ARM_TSP_RAM_LOCATION}, tsram)
ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID
else ifeq (${ARM_TSP_RAM_LOCATION}, tdram)
ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_DRAM_ID
else ifeq (${ARM_TSP_RAM_LOCATION}, dram)
ARM_TSP_RAM_LOCATION_ID = ARM_DRAM_ID
else
$(error "Unsupported ARM_TSP_RAM_LOCATION value")
endif
# Process flags
$(eval $(call add_define,ARM_TSP_RAM_LOCATION_ID))
# For the original power-state parameter format, the State-ID can be encoded
# according to the recommended encoding or zero. This flag determines which
# State-ID encoding to be parsed.
ARM_RECOM_STATE_ID_ENC := 0
# If the PSCI_EXTENDED_STATE_ID is set, then the recommended state ID need to
# be used. Else throw a build error.
ifeq (${PSCI_EXTENDED_STATE_ID}, 1)
ifeq (${ARM_RECOM_STATE_ID_ENC}, 0)
$(error "Incompatible STATE_ID build option specified")
endif
endif
# Process ARM_RECOM_STATE_ID_ENC flag
$(eval $(call assert_boolean,ARM_RECOM_STATE_ID_ENC))
$(eval $(call add_define,ARM_RECOM_STATE_ID_ENC))
PLAT_INCLUDES += -Iinclude/common/tbbr \
-Iinclude/plat/arm/common \
Add common ARM and CSS platform code This major change pulls out the common functionality from the FVP and Juno platform ports into the following categories: * (include/)plat/common. Common platform porting functionality that typically may be used by all platforms. * (include/)plat/arm/common. Common platform porting functionality that may be used by all ARM standard platforms. This includes all ARM development platforms like FVP and Juno but may also include non-ARM-owned platforms. * (include/)plat/arm/board/common. Common platform porting functionality for ARM development platforms at the board (off SoC) level. * (include/)plat/arm/css/common. Common platform porting functionality at the ARM Compute SubSystem (CSS) level. Juno is an example of a CSS-based platform. * (include/)plat/arm/soc/common. Common platform porting functionality at the ARM SoC level, which is not already defined at the ARM CSS level. No guarantees are made about the backward compatibility of functionality provided in (include/)plat/arm. Also remove any unnecessary variation between the ARM development platform ports, including: * Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the Juno implementation, which copies the information from BL2 memory instead of expecting it to persist in shared memory. * Unify the TZC configuration. There is no need to add a region for SCP in Juno; it's enough to simply not allow any access to this reserved region. Also set region 0 to provide no access by default instead of assuming this is the case. * Unify the number of memory map regions required for ARM development platforms, although the actual ranges mapped for each platform may be different. For the FVP port, this reduces the mapped peripheral address space. These latter changes will only be observed when the platform ports are migrated to use the new common platform code in subsequent patches. Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8
2015-03-19 18:58:55 +00:00
-Iinclude/plat/arm/common/aarch64
PLAT_BL_COMMON_SOURCES += lib/aarch64/xlat_tables.c \
plat/arm/common/aarch64/arm_common.c \
plat/arm/common/aarch64/arm_helpers.S \
plat/common/aarch64/plat_common.c
BL1_SOURCES += drivers/arm/cci/cci.c \
drivers/arm/ccn/ccn.c \
Add common ARM and CSS platform code This major change pulls out the common functionality from the FVP and Juno platform ports into the following categories: * (include/)plat/common. Common platform porting functionality that typically may be used by all platforms. * (include/)plat/arm/common. Common platform porting functionality that may be used by all ARM standard platforms. This includes all ARM development platforms like FVP and Juno but may also include non-ARM-owned platforms. * (include/)plat/arm/board/common. Common platform porting functionality for ARM development platforms at the board (off SoC) level. * (include/)plat/arm/css/common. Common platform porting functionality at the ARM Compute SubSystem (CSS) level. Juno is an example of a CSS-based platform. * (include/)plat/arm/soc/common. Common platform porting functionality at the ARM SoC level, which is not already defined at the ARM CSS level. No guarantees are made about the backward compatibility of functionality provided in (include/)plat/arm. Also remove any unnecessary variation between the ARM development platform ports, including: * Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the Juno implementation, which copies the information from BL2 memory instead of expecting it to persist in shared memory. * Unify the TZC configuration. There is no need to add a region for SCP in Juno; it's enough to simply not allow any access to this reserved region. Also set region 0 to provide no access by default instead of assuming this is the case. * Unify the number of memory map regions required for ARM development platforms, although the actual ranges mapped for each platform may be different. For the FVP port, this reduces the mapped peripheral address space. These latter changes will only be observed when the platform ports are migrated to use the new common platform code in subsequent patches. Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8
2015-03-19 18:58:55 +00:00
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
drivers/io/io_storage.c \
plat/arm/common/arm_bl1_setup.c \
plat/arm/common/arm_io_storage.c \
plat/common/aarch64/platform_up_stack.S
BL2_SOURCES += drivers/arm/tzc400/tzc400.c \
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
drivers/io/io_storage.c \
plat/arm/common/arm_bl2_setup.c \
plat/arm/common/arm_io_storage.c \
plat/arm/common/arm_security.c \
plat/common/aarch64/platform_up_stack.S
BL31_SOURCES += drivers/arm/cci/cci.c \
drivers/arm/ccn/ccn.c \
Add common ARM and CSS platform code This major change pulls out the common functionality from the FVP and Juno platform ports into the following categories: * (include/)plat/common. Common platform porting functionality that typically may be used by all platforms. * (include/)plat/arm/common. Common platform porting functionality that may be used by all ARM standard platforms. This includes all ARM development platforms like FVP and Juno but may also include non-ARM-owned platforms. * (include/)plat/arm/board/common. Common platform porting functionality for ARM development platforms at the board (off SoC) level. * (include/)plat/arm/css/common. Common platform porting functionality at the ARM Compute SubSystem (CSS) level. Juno is an example of a CSS-based platform. * (include/)plat/arm/soc/common. Common platform porting functionality at the ARM SoC level, which is not already defined at the ARM CSS level. No guarantees are made about the backward compatibility of functionality provided in (include/)plat/arm. Also remove any unnecessary variation between the ARM development platform ports, including: * Unify the way BL2 passes `bl31_params_t` to BL3-1. Use the Juno implementation, which copies the information from BL2 memory instead of expecting it to persist in shared memory. * Unify the TZC configuration. There is no need to add a region for SCP in Juno; it's enough to simply not allow any access to this reserved region. Also set region 0 to provide no access by default instead of assuming this is the case. * Unify the number of memory map regions required for ARM development platforms, although the actual ranges mapped for each platform may be different. For the FVP port, this reduces the mapped peripheral address space. These latter changes will only be observed when the platform ports are migrated to use the new common platform code in subsequent patches. Change-Id: Id9c269dd3dc6e74533d0e5116fdd826d53946dc8
2015-03-19 18:58:55 +00:00
drivers/arm/gic/arm_gic.c \
drivers/arm/gic/gic_v2.c \
drivers/arm/gic/gic_v3.c \
drivers/arm/tzc400/tzc400.c \
plat/arm/common/arm_bl31_setup.c \
plat/arm/common/arm_pm.c \
plat/arm/common/arm_security.c \
plat/arm/common/arm_topology.c \
plat/common/plat_gic.c \
plat/common/aarch64/platform_mp_stack.S \
plat/common/aarch64/plat_psci_common.c
ifneq (${TRUSTED_BOARD_BOOT},0)
# By default, ARM platforms use RSA keys
KEY_ALG := rsa
# Include common TBB sources
AUTH_SOURCES := drivers/auth/auth_mod.c \
drivers/auth/crypto_mod.c \
drivers/auth/img_parser_mod.c \
drivers/auth/tbbr/tbbr_cot.c \
BL1_SOURCES += ${AUTH_SOURCES}
BL2_SOURCES += ${AUTH_SOURCES}
MBEDTLS_KEY_ALG := ${KEY_ALG}
# We expect to locate the *.mk files under the directories specified below
CRYPTO_LIB_MK := drivers/auth/mbedtls/mbedtls_crypto.mk
IMG_PARSER_LIB_MK := drivers/auth/mbedtls/mbedtls_x509.mk
$(info Including ${CRYPTO_LIB_MK})
include ${CRYPTO_LIB_MK}
$(info Including ${IMG_PARSER_LIB_MK})
include ${IMG_PARSER_LIB_MK}
endif