andrius
/
arm-trusted-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

feat(stm32mp1): remove unsupported features on STM32MP13 

* GPIO: On STM32MP13, there are no banks GPIOJ, GPIOK and GPIOZ.
* STM32MP13 is a single Cortex-A7 CPU: remove reset from MPU1
  and reset from MCU traces
* There is no MCU on STM32MP13. Put MCU security management
  under STM32MP15 flag.
* The authentication feature is not supported yet on STM32MP13,
  put the code under SPM32MP15 flag.
* On STM32MP13, the monotonic counter is managed in ROM code, keep
  the monotonic counter update just for STM32MP15.
* SYSCFG: put registers not present on STM32MP13 under STM32MP15
  flag, as the code that manages them.
* PMIC: use ldo3 during DDR configuration only for STM32MP15
* Reset UART pins on USB boot is no more required.

Change-Id: Iceba59484a9bb02828fe7e99f3ecafe69c837bc7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
This commit is contained in:
Yann Gautier 2020-02-12 09:36:23 +01:00
parent 48ede66151
commit 111a384c90
6 changed files with 69 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
drivers/st/pmic/stm32mp_pmic.c
View File

@ -219,17 +219,20 @@ int pmic_ddr_power_init(enum ddr_type ddr_type)
{
int status;
uint16_t buck3_min_mv;
struct rdev *buck2, *buck3, *ldo3, *vref;
struct rdev *buck2, *buck3, *vref;
struct rdev *ldo3 __unused;
buck2 = regulator_get_by_name("buck2");
if (buck2 == NULL) {
return -ENOENT;
}
#if STM32MP15
ldo3 = regulator_get_by_name("ldo3");
if (ldo3 == NULL) {
return -ENOENT;
}
#endif
vref = regulator_get_by_name("vref_ddr");
if (vref == NULL) {
@ -238,10 +241,12 @@ int pmic_ddr_power_init(enum ddr_type ddr_type)
switch (ddr_type) {
case STM32MP_DDR3:
#if STM32MP15
status = regulator_set_flag(ldo3, REGUL_SINK_SOURCE);
if (status != 0) {
return status;
}
#endif
status = regulator_set_min_voltage(buck2);
if (status != 0) {
@ -258,10 +263,12 @@ int pmic_ddr_power_init(enum ddr_type ddr_type)
return status;
}
#if STM32MP15
status = regulator_enable(ldo3);
if (status != 0) {
return status;
}
#endif
break;
case STM32MP_LPDDR2:
@ -278,6 +285,7 @@ int pmic_ddr_power_init(enum ddr_type ddr_type)
regulator_get_range(buck3, &buck3_min_mv, NULL);
#if STM32MP15
if (buck3_min_mv != 1800) {
status = regulator_set_min_voltage(ldo3);
if (status != 0) {
@ -289,16 +297,19 @@ int pmic_ddr_power_init(enum ddr_type ddr_type)
return status;
}
}
#endif
status = regulator_set_min_voltage(buck2);
if (status != 0) {
return status;
}
#if STM32MP15
status = regulator_enable(ldo3);
if (status != 0) {
return status;
}
#endif
status = regulator_enable(buck2);
if (status != 0) {

16
plat/st/stm32mp1/bl2_plat_setup.c
View File

@ -47,7 +47,9 @@ static const char debug_msg[] = {
};
#endif
#if STM32MP15
static struct stm32mp_auth_ops stm32mp1_auth_ops;
#endif
static void print_reset_reason(void)
{
@ -82,6 +84,7 @@ static void print_reset_reason(void)
return;
}
#if STM32MP15
if ((rstsr & RCC_MP_RSTSCLRR_MCSYSRSTF) != 0U) {
if ((rstsr & RCC_MP_RSTSCLRR_PADRSTF) != 0U) {
INFO(" System reset generated by MCU (MCSYSRST)\n");
@ -90,6 +93,7 @@ static void print_reset_reason(void)
}
return;
}
#endif
if ((rstsr & RCC_MP_RSTSCLRR_MPSYSRSTF) != 0U) {
INFO(" System reset generated by MPU (MPSYSRST)\n");
@ -116,10 +120,12 @@ static void print_reset_reason(void)
return;
}
#if STM32MP15
if ((rstsr & RCC_MP_RSTSCLRR_MPUP1RSTF) != 0U) {
INFO(" MPU Processor 1 Reset\n");
return;
}
#endif
if ((rstsr & RCC_MP_RSTSCLRR_PADRSTF) != 0U) {
INFO(" Pad Reset from NRST\n");
@ -171,6 +177,7 @@ void bl2_platform_setup(void)
#endif /* STM32MP_USE_STM32IMAGE */
}
#if STM32MP15
static void update_monotonic_counter(void)
{
uint32_t version;
@ -204,6 +211,7 @@ static void update_monotonic_counter(void)
version);
}
}
#endif
void bl2_el3_plat_arch_setup(void)
{
@ -271,8 +279,10 @@ void bl2_el3_plat_arch_setup(void)
mmio_clrbits_32(rcc_base + RCC_BDCR, RCC_BDCR_VSWRST);
}
#if STM32MP15
/* Disable MCKPROT */
mmio_clrbits_32(rcc_base + RCC_TZCR, RCC_TZCR_MCKPROT);
#endif
/*
* Set minimum reset pulse duration to 31ms for discrete power
@ -307,7 +317,7 @@ void bl2_el3_plat_arch_setup(void)
stm32_save_boot_interface(boot_context->boot_interface_selected,
boot_context->boot_interface_instance);
#if STM32MP_USB_PROGRAMMER
#if STM32MP_USB_PROGRAMMER && STM32MP15
/* Deconfigure all UART RX pins configured by ROM code */
stm32mp1_deconfigure_uart_pins();
#endif
@ -359,6 +369,7 @@ skip_console_init:
}
}
#if STM32MP15
if (stm32mp_is_auth_supported()) {
stm32mp1_auth_ops.check_key =
boot_context->bootrom_ecdsa_check_key;
@ -367,12 +378,15 @@ skip_console_init:
stm32mp_init_auth(&stm32mp1_auth_ops);
}
#endif
stm32mp1_arch_security_setup();
print_reset_reason();
#if STM32MP15
update_monotonic_counter();
#endif
stm32mp1_syscfg_enable_io_compensation_finish();

6
plat/st/stm32mp1/platform.mk
View File

@ -303,9 +303,13 @@ BL2_SOURCES += drivers/io/io_block.c \
drivers/io/io_mtd.c \
drivers/io/io_storage.c \
drivers/st/crypto/stm32_hash.c \
plat/st/common/stm32mp_auth.c \
plat/st/stm32mp1/bl2_plat_setup.c
ifeq ($(STM32MP15),1)
BL2_SOURCES += plat/st/common/stm32mp_auth.c
endif
ifneq ($(filter 1,${STM32MP_EMMC} ${STM32MP_SDMMC}),)
BL2_SOURCES += drivers/mmc/mmc.c \
drivers/partition/gpt.c \

4
plat/st/stm32mp1/stm32mp1_def.h
View File

@ -182,9 +182,11 @@ enum ddr_type {
#define GPIOG_BASE U(0x50008000)
#define GPIOH_BASE U(0x50009000)
#define GPIOI_BASE U(0x5000A000)
#if STM32MP15
#define GPIOJ_BASE U(0x5000B000)
#define GPIOK_BASE U(0x5000C000)
#define GPIOZ_BASE U(0x54004000)
#endif
#define GPIO_BANK_OFFSET U(0x1000)
/* Bank IDs used in GPIO driver API */
@ -197,11 +199,13 @@ enum ddr_type {
#define GPIO_BANK_G U(6)
#define GPIO_BANK_H U(7)
#define GPIO_BANK_I U(8)
#if STM32MP15
#define GPIO_BANK_J U(9)
#define GPIO_BANK_K U(10)
#define GPIO_BANK_Z U(25)
#define STM32MP_GPIOZ_PIN_MAX_COUNT 8
#endif
/*******************************************************************************
* STM32MP1 UART

24
plat/st/stm32mp1/stm32mp1_private.c
View File

@ -111,42 +111,62 @@ void configure_mmu(void)
uintptr_t stm32_get_gpio_bank_base(unsigned int bank)
{
#if STM32MP13
assert(GPIO_BANK_A == 0 && bank <= GPIO_BANK_I);
#endif
#if STM32MP15
if (bank == GPIO_BANK_Z) {
return GPIOZ_BASE;
}
assert(GPIO_BANK_A == 0 && bank <= GPIO_BANK_K);
#endif
return GPIOA_BASE + (bank * GPIO_BANK_OFFSET);
}
uint32_t stm32_get_gpio_bank_offset(unsigned int bank)
{
#if STM32MP13
assert(GPIO_BANK_A == 0 && bank <= GPIO_BANK_I);
#endif
#if STM32MP15
if (bank == GPIO_BANK_Z) {
return 0;
}
assert(GPIO_BANK_A == 0 && bank <= GPIO_BANK_K);
#endif
return bank * GPIO_BANK_OFFSET;
}
bool stm32_gpio_is_secure_at_reset(unsigned int bank)
{
#if STM32MP13
return true;
#endif
#if STM32MP15
if (bank == GPIO_BANK_Z) {
return true;
}
return false;
#endif
}
unsigned long stm32_get_gpio_bank_clock(unsigned int bank)
{
#if STM32MP13
assert(GPIO_BANK_A == 0 && bank <= GPIO_BANK_I);
#endif
#if STM32MP15
if (bank == GPIO_BANK_Z) {
return GPIOZ;
}
assert(GPIO_BANK_A == 0 && bank <= GPIO_BANK_K);
#endif
return GPIOA + (bank - GPIO_BANK_A);
}
@ -163,11 +183,15 @@ int stm32_get_gpio_bank_pinctrl_node(void *fdt, unsigned int bank)
case GPIO_BANK_G:
case GPIO_BANK_H:
case GPIO_BANK_I:
#if STM32MP15
case GPIO_BANK_J:
case GPIO_BANK_K:
#endif
return fdt_path_offset(fdt, "/soc/pin-controller");
#if STM32MP15
case GPIO_BANK_Z:
return fdt_path_offset(fdt, "/soc/pin-controller-z");
#endif
default:
panic();
}

9
plat/st/stm32mp1/stm32mp1_syscfg.c
View File

@ -19,8 +19,10 @@
* SYSCFG REGISTER OFFSET (base relative)
*/
#define SYSCFG_BOOTR 0x00U
#if STM32MP15
#define SYSCFG_IOCTRLSETR 0x18U
#define SYSCFG_ICNR 0x1CU
#endif
#define SYSCFG_CMPCR 0x20U
#define SYSCFG_CMPENSETR 0x24U
#define SYSCFG_CMPENCLRR 0x28U
@ -32,8 +34,11 @@
* SYSCFG_BOOTR Register
*/
#define SYSCFG_BOOTR_BOOT_MASK GENMASK(2, 0)
#if STM32MP15
#define SYSCFG_BOOTR_BOOTPD_MASK GENMASK(6, 4)
#define SYSCFG_BOOTR_BOOTPD_SHIFT 4
#endif
/*
* SYSCFG_IOCTRLSETR Register
*/
@ -106,12 +111,14 @@ static void disable_io_comp_cell(uintptr_t cmpcr_off)
static void enable_high_speed_mode_low_voltage(void)
{
#if STM32MP15
mmio_write_32(SYSCFG_BASE + SYSCFG_IOCTRLSETR,
SYSCFG_IOCTRLSETR_HSLVEN_TRACE |
SYSCFG_IOCTRLSETR_HSLVEN_QUADSPI |
SYSCFG_IOCTRLSETR_HSLVEN_ETH |
SYSCFG_IOCTRLSETR_HSLVEN_SDMMC |
SYSCFG_IOCTRLSETR_HSLVEN_SPI);
#endif
}
static void stm32mp1_syscfg_set_hslv(void)
@ -165,6 +172,7 @@ static void stm32mp1_syscfg_set_hslv(void)
void stm32mp1_syscfg_init(void)
{
#if STM32MP15
uint32_t bootr;
/*
@ -178,6 +186,7 @@ void stm32mp1_syscfg_init(void)
SYSCFG_BOOTR_BOOT_MASK;
mmio_clrsetbits_32(SYSCFG_BASE + SYSCFG_BOOTR, SYSCFG_BOOTR_BOOTPD_MASK,
bootr << SYSCFG_BOOTR_BOOTPD_SHIFT);
#endif
stm32mp1_syscfg_set_hslv();