Merge changes from topics "ls1088a", "ls1088a-prepare" into integration

* changes: docs(layerscape): add ls1088a soc and board support feat(ls1088aqds): add ls1088aqds board support feat(ls1088ardb): add ls1088ardb board support feat(ls1088a): add new SoC platform ls1088a build(changelog): add new scopes for ls1088a feat(bl2): add support to separate no-loadable sections refactor(layerscape): refine comparison of inerconnection feat(layerscape): add soc helper macro definition for chassis 3 feat(nxp-gic): add some macros definition for gicv3 feat(layerscape): add CHASSIS 3 support for tbbr feat(layerscape): define more chassis 3 hardware address feat(nxp-crypto): add chassis 3 support feat(nxp-dcfg): add Chassis 3 support feat(lx2): enable DDR erratas for lx2 platforms feat(layerscape): print DDR errata information feat(nxp-ddr): add workaround for errata A050958 feat(layerscape): add new soc errata a010539 support feat(layerscape): add new soc errata a009660 support feat(nxp-ddr): add rawcard 1F support fix(layerscape): fix build issue of mmap_add_ddr_region_dynamically fix(nxp-tools): fix create_pbl print log build(changelog): add new scopes for NXP driver
2022-03-28 17:40:59 +02:00 · 2022-03-28 17:40:59 +02:00 · 2ea18c7df3
parent 62a63491de 6e4e294a07
commit 2ea18c7df3
47 changed files with 3596 additions and 56 deletions
--- a/2
+++ b/2
@ -1021,6 +1021,7 @@ $(eval $(call assert_booleans,\
        RESET_TO_BL31 \
        SAVE_KEYS \
        SEPARATE_CODE_AND_RODATA \
+        SEPARATE_BL2_NOLOAD_REGION \
        SEPARATE_NOBITS_REGION \
        SPIN_ON_BL1_EXIT \
        SPM_MM \
@ -1136,6 +1137,7 @@ $(eval $(call add_defines,\
        RAS_EXTENSION \
        RESET_TO_BL31 \
        SEPARATE_CODE_AND_RODATA \
+        SEPARATE_BL2_NOLOAD_REGION \
        SEPARATE_NOBITS_REGION \
        RECLAIM_INIT_CODE \
        SPD_${SPD} \
--- a/bl2/bl2_el3.ld.S
+++ b/bl2/bl2_el3.ld.S
@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2017-2022, ARM Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */
@ -17,6 +17,11 @@ MEMORY {
    RAM (rwx): ORIGIN = BL2_RW_BASE, LENGTH = BL2_RW_LIMIT - BL2_RW_BASE
 #else
    RAM (rwx): ORIGIN = BL2_BASE, LENGTH = BL2_LIMIT - BL2_BASE
+#if SEPARATE_BL2_NOLOAD_REGION
+    RAM_NOLOAD (rw!a): ORIGIN = BL2_NOLOAD_START, LENGTH = BL2_NOLOAD_LIMIT - BL2_NOLOAD_START
+#else
+#define RAM_NOLOAD RAM
+#endif
 #endif
 }

@ -106,9 +111,18 @@ SECTIONS
    __DATA_RAM_END__ = __DATA_END__;

    RELA_SECTION >RAM
-    STACK_SECTION >RAM
-    BSS_SECTION >RAM
-    XLAT_TABLE_SECTION >RAM
+#if SEPARATE_BL2_NOLOAD_REGION
+    SAVED_ADDR = .;
+    . = BL2_NOLOAD_START;
+    __BL2_NOLOAD_START__ = .;
+#endif
+    STACK_SECTION >RAM_NOLOAD
+    BSS_SECTION >RAM_NOLOAD
+    XLAT_TABLE_SECTION >RAM_NOLOAD
+#if SEPARATE_BL2_NOLOAD_REGION
+    __BL2_NOLOAD_END__ = .;
+    . = SAVED_ADDR;
+#endif

 #if USE_COHERENT_MEM
    /*
--- a/changelog.yaml
+++ b/changelog.yaml
@ -349,6 +349,16 @@ subsections:
                  - title: LS1046AQDS
                    scope: ls1046aqds

+              - title: LS1088A
+                scope: ls1088a
+
+                subsections:
+                  - title: LS1088ARDB
+                    scope: ls1088ardb
+
+                  - title: LS1088AQDS
+                    scope: ls1088aqds
+
      - title: QEMU
        scope: qemu

@ -748,6 +758,12 @@ subsections:
          - title: NXP Crypto
            scope: nxp-crypto

+          - title: DDR
+            scope: nxp-ddr
+
+          - title: GIC
+            scope: nxp-gic
+
      - title: Renesas
        scope: renesas-drivers

--- a/docs/about/maintainers.rst
+++ b/docs/about/maintainers.rst
@ -573,6 +573,14 @@ NXP SoC Part LS1046A and its platform port
 :|F|: plat/nxp/soc-ls1046a/ls1046afrwy
 :|F|: plat/nxp/soc-ls1046a/ls1046aqds

+NXP SoC Part LS1088A and its platform port
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+:|M|: Jiafei Pan <jiafei.pan@nxp.com>
+:|G|: `JiafeiPan`_
+:|F|: plat/nxp/soc-ls1088a
+:|F|: plat/nxp/soc-ls1088a/ls1088ardb
+:|F|: plat/nxp/soc-ls1088a/ls1088aqds
+
 QEMU platform port
 ^^^^^^^^^^^^^^^^^^
 :|M|: Jens Wiklander <jens.wiklander@linaro.org>
--- a/docs/getting_started/build-options.rst
+++ b/docs/getting_started/build-options.rst
@ -647,6 +647,13 @@ Common build options
   ``BL31_NOBITS_LIMIT``. When the option is ``0`` (the default), NOBITS
   sections are placed in RAM immediately following the loaded firmware image.

+-  ``SEPARATE_BL2_NOLOAD_REGION``: Setting this option to ``1`` allows the
+   NOLOAD sections of BL2 (.bss, stacks, page tables) to be allocated in RAM
+   discontiguous from loaded firmware images. When set, the platform need to
+   provide definitions of ``BL2_NOLOAD_START`` and ``BL2_NOLOAD_LIMIT``. This
+   flag is disabled by default and NOLOAD sections are placed in RAM immediately
+   following the loaded firmware image.
+
 -  ``SMC_PCI_SUPPORT``: This option allows platforms to handle PCI configuration
   access requests via a standard SMCCC defined in `DEN0115`_. When combined with
   UEFI+ACPI this can provide a certain amount of OS forward compatibility
@ -961,7 +968,7 @@ Firmware update options

 --------------

-*Copyright (c) 2019-2021, Arm Limited. All rights reserved.*
+*Copyright (c) 2019-2022, Arm Limited. All rights reserved.*

 .. _DEN0115: https://developer.arm.com/docs/den0115/latest
 .. _PSA FW update specification: https://developer.arm.com/documentation/den0118/a/
--- a/docs/plat/nxp/nxp-layerscape.rst
+++ b/docs/plat/nxp/nxp-layerscape.rst
@ -103,7 +103,7 @@ line of QorIQ communications processors. Featuring power-efficient 64-bit
 Arm Cortex-A72 cores with ECC-protected L1 and L2 cache memories for high
 reliability, running up to 1.8 GHz.

-Details about LS1043A can be found at `ls1046a`_.
+Details about LS1046A can be found at `ls1046a`_.

 - LS1046ARDB Board:

@ -113,7 +113,7 @@ architecture processor. The LS1046ARDB board supports the Layerscape LS1046A
 processor and is optimized to support the DDR4 memory and a full complement
 of high-speed SerDes ports.

-Details about LS1043A RDB board can be found at `ls1046ardb`_.
+Details about LS1046A RDB board can be found at `ls1046ardb`_.

 - LS1046AFRWY Board:

@ -124,7 +124,28 @@ board supports the LS1046A processor, onboard DDR4 memory, multiple Gigabit
 Ethernet, USB3.0 and M2_Type_E interfaces for Wi-Fi, FRWY-LS1046A-AC includes
 the Wi-Fi card.

-Details about LS1043A RDB board can be found at `ls1046afrwy`_.
+Details about LS1046A FRWY board can be found at `ls1046afrwy`_.
+
+5. LS1088A
+
+- SoC Overview:
+
+The LS1088A family of multicore communications processors combines up to and eight
+Arm Cortex-A53 cores with the advanced, high-performance data path and network
+peripheral interfaces required for wireless access points, networking infrastructure,
+intelligent edge access, including virtual customer premise equipment (vCPE) and
+high-performance industrial applications.
+
+Details about LS1088A can be found at `ls1088a`_.
+
+- LS1088ARDB Board:
+
+The LS1088A reference design board provides a comprehensive platform that
+enables design and evaluation of the product (LS1088A processor). This RDB
+comes pre-loaded with a board support package (BSP) based on a standard
+Linux kernel.
+
+Details about LS1088A RDB board can be found at `ls1088ardb`_.

 Table of supported boot-modes by each platform & platform that needs FIP-DDR:
 -----------------------------------------------------------------------------
@ -144,6 +165,8 @@ Table of supported boot-modes by each platform & platform that needs FIP-DDR:
 +---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
 |     ls1046afrwy     |  yes  |  yes   |       |       |       |             |              |       no        |
 +---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+
+|     ls1088ardb      |  yes  |  yes   |       |       |       |             |              |       no        |
+---------------------+-------+--------+-------+-------+-------+-------------+--------------+-----------------+


 Boot Sequence
@ -336,7 +359,7 @@ should be modified based on the binary size of the image to be copied.

   --  Then reset to alternate bank to boot up ATF.

-   Command for lx2160a and ls1028a platforms:
+   Command for lx2160a, ls1088a and ls1028a platforms:

   .. code:: shell

@ -370,7 +393,7 @@ should be modified based on the binary size of the image to be copied.

   --  Then reset to sd/emmc to boot up ATF from sd/emmc as boot-source.

-   Command for lx2160A and ls1028a platforms:
+   Command for lx2160A, ls1088a and ls1028a platforms:

   .. code:: shell

@ -445,4 +468,6 @@ Refer `nxp-ls-tbbr.rst`_ for detailed user steps.
 .. _ls1046a: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-1046a-and-1026a-processors:LS1046A
 .. _ls1046ardb: https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1046a-reference-design-board:LS1046A-RDB
 .. _ls1046afrwy: https://www.nxp.com/design/qoriq-developer-resources/ls1046a-freeway-board:FRWY-LS1046A
+.. _ls1088a: https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/layerscape-processors/layerscape-1088a-and-1048a-processor:LS1088A
+.. _ls1088ardb: https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1088a-reference-design-board:LS1088A-RDB
 .. _nxp-ls-tbbr.rst: ./nxp-ls-tbbr.rst
--- a/drivers/nxp/dcfg/dcfg.c
+++ b/drivers/nxp/dcfg/dcfg.c
@ -1,5 +1,5 @@
 /*
- * Copyright 2020-2021 NXP
+ * Copyright 2020-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -74,14 +74,11 @@ const devdisr5_info_t *get_devdisr5_info(void)

 	reg = gur_in32(dcfg_init_info->g_nxp_dcfg_addr + DCFG_DEVDISR5_OFFSET);

+	devdisr5_info.ddrc1_present = (reg & DISR5_DDRC1_MASK) ? 0 : 1;
 #if defined(CONFIG_CHASSIS_3_2)
-	devdisr5_info.ddrc1_present = (reg & DISR5_DDRC1_MASK) ? 0 : 1;
 	devdisr5_info.ddrc2_present = (reg & DISR5_DDRC2_MASK) ? 0 : 1;
-	devdisr5_info.ocram_present = (reg & DISR5_OCRAM_MASK) ? 0 : 1;
-#elif defined(CONFIG_CHASSIS_2)
-	devdisr5_info.ddrc1_present = (reg & DISR5_DDRC1_MASK) ? 0 : 1;
-	devdisr5_info.ocram_present = (reg & DISR5_OCRAM_MASK) ? 0 : 1;
 #endif
+	devdisr5_info.ocram_present = (reg & DISR5_OCRAM_MASK) ? 0 : 1;
 	devdisr5_info.is_populated = true;

 	return (const devdisr5_info_t *) &devdisr5_info;
--- a/drivers/nxp/ddr/nxp-ddr/ddr.mk
+++ b/drivers/nxp/ddr/nxp-ddr/ddr.mk
@ -1,5 +1,5 @@
 #
-# Copyright 2021 NXP
+# Copyright 2021-2022 NXP
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@ -19,6 +19,10 @@ ifeq (${ERRATA_DDR_A050450}, 1)
 $(eval $(call add_define,ERRATA_DDR_A050450))
 endif

+ifeq (${ERRATA_DDR_A050958}, 1)
+$(eval $(call add_define,ERRATA_DDR_A050958))
+endif
+
 endif

 ifeq ($(PLAT_DDR_PHY), PHY_GEN1)
--- a/drivers/nxp/ddr/nxp-ddr/dimm.c
+++ b/drivers/nxp/ddr/nxp-ddr/dimm.c
@ -1,5 +1,5 @@
 /*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -194,7 +194,7 @@ int cal_dimm_params(const struct ddr4_spd *spd, struct dimm_params *pdimm)
 	case DDR4_SPD_MINI_RDIMM:
 	case DDR4_SPD_72B_SO_RDIMM:
 		pdimm->rdimm = 1;
-		pdimm->rc = spd->mod_section.registered.ref_raw_card & 0x8f;
+		pdimm->rc = spd->mod_section.registered.ref_raw_card & 0x9f;
 		if ((spd->mod_section.registered.reg_map & 0x1) != 0) {
 			pdimm->mirrored_dimm = 1;
 		}
@ -223,7 +223,7 @@ int cal_dimm_params(const struct ddr4_spd *spd, struct dimm_params *pdimm)
 	case DDR4_SPD_72B_SO_UDIMM:
 	case DDR4_SPD_16B_SO_DIMM:
 	case DDR4_SPD_32B_SO_DIMM:
-		pdimm->rc = spd->mod_section.unbuffered.ref_raw_card & 0x8f;
+		pdimm->rc = spd->mod_section.unbuffered.ref_raw_card & 0x9f;
 		if ((spd->mod_section.unbuffered.addr_mapping & 0x1) != 0) {
 			pdimm->mirrored_dimm = 1;
 		}
--- a/drivers/nxp/ddr/phy-gen2/phy.c
+++ b/drivers/nxp/ddr/phy-gen2/phy.c
@ -1,5 +1,5 @@
 /*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
 * SPDX-License-Identifier: BSD-3-Clause
 *
 */
@ -1673,6 +1673,10 @@ static void prog_dq_dqs_rcv_cntrl(uint16_t *phy,
 	int sel_analog_vref = 1;
 	uint32_t addr;

+#ifdef ERRATA_DDR_A050958
+	gain_curr_adj_defval = 0x1f;
+#endif
+
 	dq_dqs_rcv_cntrl = gain_curr_adj_defval << csr_gain_curr_adj_lsb |
 			major_mode_dbyte << csr_major_mode_dbyte_lsb	|
 			dfe_ctrl_defval << csr_dfe_ctrl_lsb		|
--- a/include/arch/aarch32/el3_common_macros.S
+++ b/include/arch/aarch32/el3_common_macros.S
@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2016-2022, ARM Limited and Contributors. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */
@ -398,6 +398,12 @@
 		ldr	r1, =__RW_END__
 		sub	r1, r1, r0
 		bl	inv_dcache_range
+#if defined(IMAGE_BL2) && SEPARATE_BL2_NOLOAD_REGION
+		ldr	r0, =__BL2_NOLOAD_START__
+		ldr	r1, =__BL2_NOLOAD_END__
+		sub	r1, r1, r0
+		bl	inv_dcache_range
+#endif
 #endif

 		/*
--- a/include/arch/aarch64/el3_common_macros.S
+++ b/include/arch/aarch64/el3_common_macros.S
@ -469,6 +469,14 @@
 		sub	x1, x1, x0
 		bl	inv_dcache_range
 #endif
+#if defined(IMAGE_BL2) && SEPARATE_BL2_NOLOAD_REGION
+		adrp	x0, __BL2_NOLOAD_START__
+		add	x0, x0, :lo12:__BL2_NOLOAD_START__
+		adrp	x1, __BL2_NOLOAD_END__
+		add	x1, x1, :lo12:__BL2_NOLOAD_END__
+		sub	x1, x1, x0
+		bl	inv_dcache_range
+#endif
 #endif
 		adrp	x0, __BSS_START__
 		add	x0, x0, :lo12:__BSS_START__
--- a/include/drivers/nxp/crypto/caam/caam.h
+++ b/include/drivers/nxp/crypto/caam/caam.h
@ -1,5 +1,5 @@
 /*
- * Copyright 2017-2021 NXP
+ * Copyright 2017-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -15,7 +15,7 @@
 /* Job ring 3 is reserved for usage by sec firmware */
 #define DEFAULT_JR	3

-#if defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_2)
+#if defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_3) || defined(CONFIG_CHASSIS_2)
 #define CAAM_JR0_OFFSET			0x10000
 #define CAAM_JR1_OFFSET			0x20000
 #define CAAM_JR2_OFFSET			0x30000
--- a/include/drivers/nxp/dcfg/dcfg.h
+++ b/include/drivers/nxp/dcfg/dcfg.h
@ -1,5 +1,5 @@
 /*
- * Copyright 2018-2021 NXP
+ * Copyright 2018-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -12,7 +12,7 @@

 #if defined(CONFIG_CHASSIS_2)
 #include <dcfg_lsch2.h>
-#elif defined(CONFIG_CHASSIS_3_2)
+#elif defined(CONFIG_CHASSIS_3_2) || defined(CONFIG_CHASSIS_3)
 #include <dcfg_lsch3.h>
 #endif

--- a/include/drivers/nxp/gic/gicv3/plat_gic.h
+++ b/include/drivers/nxp/gic/gicv3/plat_gic.h
@ -1,5 +1,5 @@
 /*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -21,8 +21,12 @@
 #define GICD_CTLR_OFFSET        0x0
 #define GICD_CLR_SPI_SR         0x58
 #define GICD_IGROUPR_2          0x88
+#define GICD_ISENABLER_1        0x104
+#define GICD_ICENABLER_1        0x184
 #define GICD_ISENABLER_2        0x108
 #define GICD_ICENABLER_2        0x188
+#define GICD_ISENABLER_3        0x10c
+#define GICD_ICENABLER_3        0x18c
 #define GICD_ICPENDR_2          0x288
 #define GICD_ICACTIVER_2        0x388
 #define GICD_IPRIORITYR_22      0x458
@ -69,6 +73,9 @@
 #define GIC_IRM_SPI89           0x80000000

 #define GICD_IROUTER_VALUE      0x100
+#define GICD_ISENABLER_1_VALUE  0x10000000
+#define GICD_ISENABLER_2_VALUE  0x100
+#define GICD_ISENABLER_3_VALUE  0x20100
 #define GICR_WAKER_SLEEP_BIT    0x2
 #define GICR_WAKER_ASLEEP       (1 << 2 | 1 << 1)

--- a/make_helpers/defaults.mk
+++ b/make_helpers/defaults.mk
@ -250,6 +250,10 @@ SEPARATE_CODE_AND_RODATA	:= 0
 # separate memory region, which may be discontiguous from the rest of BL31.
 SEPARATE_NOBITS_REGION		:= 0

+# Put BL2 NOLOAD sections (.bss, stacks, page tables) in a separate memory
+# region, platform Makefile is free to override this value.
+SEPARATE_BL2_NOLOAD_REGION	:= 0
+
 # If the BL31 image initialisation code is recalimed after use for the secondary
 # cores stack
 RECLAIM_INIT_CODE		:= 0
--- a/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h
+++ b/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h
@ -1,5 +1,5 @@
 /*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -15,12 +15,13 @@
 #define NXP_DCSR_ADDR			0x700000000
 #define NXP_DCSR_SIZE			0x40000000

-/* Flex-SPI controller address */
-#define NXP_FLEXSPI_ADDR		0x020C0000
-/* Flex-SPI Flash Start address */
-#define NXP_FLEXSPI_FLASH_ADDR		0x20000000
+/* Quad SPI Region #1 base address */
+#define NXP_QSPI_FLASH_ADDR		0x20000000

-/* MMU 500 soc.c*/
+/* IFC Region #1 base address */
+#define NXP_NOR_FLASH_ADDR		0x30000000
+
+/* MMU 500 */
 #define NXP_SMMU_ADDR			0x05000000

 #define NXP_SNVS_ADDR			0x01E90000
@ -34,8 +35,12 @@
 #define NXP_I2C_ADDR			0x02000000
 #define NXP_ESDHC_ADDR			0x02140000
 #define NXP_ESDHC2_ADDR			0x02150000
-#define NXP_UART_ADDR			0x021C0000
-#define NXP_UART1_ADDR			0x021D0000
+#ifndef NXP_UART_ADDR
+#define NXP_UART_ADDR			0x021C0500
+#endif
+#ifndef NXP_UART1_ADDR
+#define NXP_UART1_ADDR			0x021C0600
+#endif

 #define NXP_GPIO1_ADDR			0x02300000
 #define NXP_GPIO2_ADDR			0x02310000
@ -50,8 +55,8 @@
 #define NXP_TIMER_STATUS_ADDR		0x023F0000

 #define NXP_GICD_ADDR			0x06000000
-#define NXP_GICR_ADDR			0x06200000
-#define NXP_GICR_SGI_ADDR		0x06210000
+#define NXP_GICR_ADDR			0x06100000
+#define NXP_GICR_SGI_ADDR		0x06110000

 #define NXP_CAAM_ADDR			0x08000000

@ -61,4 +66,35 @@

 #define NXP_RESET_ADDR			0x01E60000
 #define NXP_SEC_REGFILE_ADDR		0x01E88000
-#endif	/*	SOC_DEFAULT_BASE_ADDR_H		*/
+
+#define NXP_RST_ADDR			0x01E88000
+
+/* DDR memory Map */
+#define NXP_DDR_ADDR			0x01080000
+#define NXP_DDR2_ADDR			0x01090000
+#define NXP_DDR3_ADDR			0x08210000
+
+/* QuadSPI base address */
+#define NXP_QSPI_ADDR			0x020C0000
+/* IFC base address */
+#define NXP_IFC_ADDR			0x02240000
+
+/* CCI400 base address */
+#define NXP_CCI_ADDR			0x04090000
+
+/* Global Generic Reference Timer base address */
+#define NXP_TIMER_ADDR			0x023E0000
+
+/* OCRAM TZPC base address */
+#define NXP_OCRAM_TZPC_ADDR		0x02200000
+
+#define NXP_EPU_ADDR			0x700060000
+
+#define NXP_CCN_ADDR			0x04000000
+#define NXP_CCN_HNI_ADDR		0x04080000
+#define NXP_CCN_HN_F_0_ADDR		0x04200000
+#define NXP_CCN_HN_F_1_ADDR		0x04210000
+
+#define TPMWAKEMR0_ADDR			0x700123c50
+
+#endif	/* SOC_DEFAULT_BASE_ADDR_H */
--- a/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h
+++ b/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h
@ -0,0 +1,98 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef SOC_DEFAULT_HELPER_MACROS_H
+#define SOC_DEFAULT_HELPER_MACROS_H
+
+#ifdef NXP_OCRAM_TZPC_ADDR
+#define TZPC_BLOCK_SIZE			0x1000
+#endif
+
+/* Reset block register offsets */
+#ifdef NXP_RESET_ADDR
+
+/* Register Offset */
+#define RST_RSTCR_OFFSET		0x0
+#define RST_RSTRQMR1_OFFSET		0x10
+#define RST_RSTRQSR1_OFFSET		0x18
+#define BRR_OFFSET			0x60
+
+/* helper macros */
+#define RSTRQMR_RPTOE_MASK		(1 << 19)
+#endif /* NXP_RESET_ADDR */
+
+#define PCIeRC_RN_I_NODE_ID_OFFSET	0x8
+#define PoS_CONTROL_REG_OFFSET		0x0
+#define POS_EARLY_WR_COMP_EN		0x20
+#define HNI_POS_EN			0x01
+#define POS_TERMINATE_BARRIERS		0x10
+#define SERIALIZE_DEV_nGnRnE_WRITES	0x200
+#define ENABLE_ERR_SIGNAL_TO_MN		0x4
+#define ENABLE_RESERVE_BIT53		0x400
+#define ENABLE_WUO			0x10
+
+#define PORT_S0_CTRL_REG_RNI		0x010
+#define PORT_S1_CTRL_REG_RNI		0x110
+#define PORT_S2_CTRL_REG_RNI		0x210
+#define ENABLE_FORCE_RD_QUO		0x20
+#define QOS_SETTING			0x00FF000C
+
+/* epu register offsets and values */
+#define EPU_EPGCR_OFFSET		0x0
+#define EPU_EPIMCR10_OFFSET		0x128
+#define EPU_EPCTR10_OFFSET		0xa28
+#define EPU_EPCCR10_OFFSET		0x828
+#ifndef EPU_EPCCR10_VAL
+#define EPU_EPCCR10_VAL			0xb2800000
+#endif
+#define EPU_EPIMCR10_VAL		0xba000000
+#define EPU_EPCTR10_VAL			0x0
+#define EPU_EPGCR_VAL			(1 << 31)
+
+#ifdef NXP_CCN_ADDR
+#define NXP_CCN_HN_F_1_ADDR		0x04210000
+
+#define CCN_HN_F_SAM_NODEID_MASK	0x7f
+#define CCN_HN_F_SNP_DMN_CTL_OFFSET	0x200
+#define CCN_HN_F_SNP_DMN_CTL_SET_OFFSET	0x210
+#define CCN_HN_F_SNP_DMN_CTL_CLR_OFFSET	0x220
+#define CCN_HN_F_SNP_DMN_CTL_MASK	0x80a00
+#define CCN_HNF_NODE_COUNT              8
+#define CCN_HNF_OFFSET                  0x10000
+
+#define SA_AUX_CTRL_REG_OFFSET		0x500
+#define NUM_HNI_NODE			2
+#define CCN_HNI_MEMORY_MAP_SIZE		0x10000
+
+#define PCIeRC_RN_I_NODE_ID_OFFSET	0x8
+#define PoS_CONTROL_REG_OFFSET		0x0
+#define POS_EARLY_WR_COMP_EN		0x20
+#define HNI_POS_EN			0x01
+#define POS_TERMINATE_BARRIERS		0x10
+#define SERIALIZE_DEV_nGnRnE_WRITES	0x200
+#define ENABLE_ERR_SIGNAL_TO_MN		0x4
+#define ENABLE_RESERVE_BIT53		0x400
+#define ENABLE_WUO			0x10
+#endif
+
+/* reset register bit */
+#define RSTRQMR_RPTOE_MASK		(1 << 19)
+
+/* secmon register offsets and bitfields */
+#define SECMON_HPCOMR_OFFSET		0x4
+#define SECMON_HPCOMR_NPSWAEN		0x80000000
+
+/* Secure-Register-File register offsets and bit masks */
+#ifdef NXP_RST_ADDR
+/* Register Offset */
+#define CORE_HOLD_OFFSET		0x140
+#endif
+
+#define DCFG_SBEESR2_ADDR		0x00100534
+#define DCFG_MBEESR2_ADDR		0x00100544
+/* SBEESR and MBEESR bit mask */
+#define OCRAM_EESR_MASK			0x00000008
+
+#endif /* SOC_DEFAULT_HELPER_MACROS_H */
--- a/plat/nxp/common/plat_make_helper/soc_common_def.mk
+++ b/plat/nxp/common/plat_make_helper/soc_common_def.mk
@ -1,4 +1,4 @@
-# Copyright 2020-2021 NXP
+# Copyright 2020-2022 NXP
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@ -11,14 +11,12 @@ $(eval CACHE_WRITEBACK_GRANULE=$(shell echo $$((1 << $(CACHE_LINE)))))
 $(eval $(call add_define_val,CACHE_WRITEBACK_GRANULE,$(CACHE_WRITEBACK_GRANULE)))
 endif

-ifeq (${INTERCONNECT}, "CCI400")
+ifneq (${INTERCONNECT},)
 $(eval $(call add_define,NXP_HAS_${INTERCONNECT}))
+ifeq (${INTERCONNECT}, CCI400)
 ICNNCT_ID := 0x420
 $(eval $(call add_define,ICNNCT_ID))
 endif
-
-ifeq (${INTERCONNECT}, "CCN508")
-$(eval $(call add_define,NXP_HAS_CCN508))
 endif

 ifneq (${CHASSIS},)
--- a/plat/nxp/common/setup/ls_bl2_el3_setup.c
+++ b/plat/nxp/common/setup/ls_bl2_el3_setup.c
@ -1,5 +1,5 @@
 /*
- * Copyright 2018-2020 NXP
+ * Copyright 2018-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -182,7 +182,7 @@ void ls_bl2_el3_plat_arch_setup(void)
 	unsigned int flags = 0U;
 	/* Initialise the IO layer and register platform IO devices */
 	ls_setup_page_tables(
-#if SEPARATE_RW_AND_NOLOAD
+#if SEPARATE_BL2_NOLOAD_REGION
 			      BL2_START,
 			      BL2_LIMIT - BL2_START,
 #else
@ -289,8 +289,9 @@ void bl2_plat_preload_setup(void)
 	if ((dram_regions_info.region[0].addr == 0)
 		&& (dram_regions_info.total_dram_size > 0)) {
 		populate_dram_regions_info();
-
+#ifdef PLAT_XLAT_TABLES_DYNAMIC
 		mmap_add_ddr_region_dynamically();
+#endif
 	}

 	/* setup the memory region access permissions */
--- a/plat/nxp/common/soc_errata/errata.c
+++ b/plat/nxp/common/soc_errata/errata.c
@ -1,5 +1,5 @@
 /*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -19,6 +19,15 @@ void soc_errata(void)
 	INFO("SoC workaround for Errata A008850 Early-Phase was applied\n");
 	erratum_a008850_early();
 #endif
+#if ERRATA_SOC_A009660
+	INFO("SoC workaround for Errata A009660 was applied\n");
+	erratum_a009660();
+#endif
+#if ERRATA_SOC_A010539
+	INFO("SoC workaround for Errata A010539 was applied\n");
+	erratum_a010539();
+#endif
+
 	/*
 	 * The following DDR Erratas workaround are implemented in DDR driver,
 	 * but print information here.
@ -29,4 +38,22 @@ void soc_errata(void)
 #if ERRATA_DDR_A050450
 	INFO("SoC workaround for DDR Errata A050450 was applied\n");
 #endif
+#if ERRATA_DDR_A050958
+	INFO("SoC workaround for DDR Errata A050958 was applied\n");
+#endif
+#if ERRATA_DDR_A008511
+	INFO("SoC workaround for DDR Errata A008511 was applied\n");
+#endif
+#if ERRATA_DDR_A009803
+	INFO("SoC workaround for DDR Errata A009803 was applied\n");
+#endif
+#if ERRATA_DDR_A009942
+	INFO("SoC workaround for DDR Errata A009942 was applied\n");
+#endif
+#if ERRATA_DDR_A010165
+	INFO("SoC workaround for DDR Errata A010165 was applied\n");
+#endif
+#if ERRATA_DDR_A009663
+	INFO("SoC workaround for DDR Errata A009663 was applied\n");
+#endif
 }
--- a/plat/nxp/common/soc_errata/errata.mk
+++ b/plat/nxp/common/soc_errata/errata.mk
@ -1,5 +1,5 @@
 #
-# Copyright 2021 NXP
+# Copyright 2021-2022 NXP
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@ -9,7 +9,9 @@

 ERRATA := \
  ERRATA_SOC_A050426 \
-  ERRATA_SOC_A008850
+  ERRATA_SOC_A008850 \
+  ERRATA_SOC_A009660 \
+  ERRATA_SOC_A010539

 define enable_errata
  $(1) ?= 0
--- a/plat/nxp/common/soc_errata/errata_a009660.c
+++ b/plat/nxp/common/soc_errata/errata_a009660.c
@ -0,0 +1,14 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <mmio.h>
+#include <soc_default_base_addr.h>
+
+void erratum_a009660(void)
+{
+	mmio_write_32(NXP_SCFG_ADDR + 0x20c, 0x63b20042);
+}
--- a/plat/nxp/common/soc_errata/errata_a010539.c
+++ b/plat/nxp/common/soc_errata/errata_a010539.c
@ -0,0 +1,26 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <mmio.h>
+
+#include <plat_common.h>
+
+void erratum_a010539(void)
+{
+	if (get_boot_dev() == BOOT_DEVICE_QSPI) {
+		unsigned int *porsr1 = (void *)(NXP_DCFG_ADDR +
+				DCFG_PORSR1_OFFSET);
+		uint32_t val;
+
+		val = (gur_in32(porsr1) & ~PORSR1_RCW_MASK);
+		mmio_write_32((uint32_t)(NXP_DCSR_DCFG_ADDR +
+				DCFG_DCSR_PORCR1_OFFSET), htobe32(val));
+		/* Erratum need to set '1' to all bits for reserved SCFG register 0x1a8 */
+		mmio_write_32((uint32_t)(NXP_SCFG_ADDR + 0x1a8),
+				htobe32(0xffffffff));
+	}
+}
--- a/plat/nxp/common/soc_errata/errata_list.h
+++ b/plat/nxp/common/soc_errata/errata_list.h
@ -1,5 +1,5 @@
 /*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -17,4 +17,12 @@ void erratum_a008850_early(void);
 void erratum_a008850_post(void);
 #endif

+#ifdef ERRATA_SOC_A009660
+void erratum_a009660(void);
+#endif
+
+#ifdef ERRATA_SOC_A010539
+void erratum_a010539(void);
+#endif
+
 #endif /* ERRATA_LIST_H */
--- a/plat/nxp/common/tbbr/tbbr.mk
+++ b/plat/nxp/common/tbbr/tbbr.mk
@ -1,5 +1,5 @@
 #
-# Copyright 2020 NXP
+# Copyright 2020-2022 NXP
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@ -13,6 +13,12 @@ include $(PLAT_DRIVERS_PATH)/csu/csu.mk
 CSF_FILE		:=	input_blx_ch${CHASSIS}
 BL2_CSF_FILE		:=	input_bl2_ch${CHASSIS}
 else
+ifeq ($(CHASSIS), 3)
+CSF_FILE		:=	input_blx_ch${CHASSIS}
+BL2_CSF_FILE		:=	input_bl2_ch${CHASSIS}
+PBI_CSF_FILE		:=	input_pbi_ch${CHASSIS}
+$(eval $(call add_define, CSF_HDR_CH3))
+else
 ifeq ($(CHASSIS), 3_2)
 CSF_FILE		:=	input_blx_ch3
 BL2_CSF_FILE		:=	input_bl2_ch${CHASSIS}
@ -22,6 +28,7 @@ else
    $(error -> CHASSIS not set!)
 endif
 endif
+endif

 PLAT_AUTH_PATH		:=  $(PLAT_DRIVERS_PATH)/auth

--- a/plat/nxp/soc-ls1088a/aarch64/ls1088a.S
+++ b/plat/nxp/soc-ls1088a/aarch64/ls1088a.S
--- a/plat/nxp/soc-ls1088a/aarch64/ls1088a_helpers.S
+++ b/plat/nxp/soc-ls1088a/aarch64/ls1088a_helpers.S
@ -0,0 +1,69 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <platform_def.h>
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_is_my_cpu_primary
+	.globl	plat_reset_handler
+	.globl  platform_mem_init
+
+func platform_mem1_init
+	ret
+endfunc platform_mem1_init
+
+func platform_mem_init
+	ret
+endfunc	platform_mem_init
+
+func apply_platform_errata
+	ret
+endfunc apply_platform_errata
+
+func plat_reset_handler
+	mov	x29, x30
+	bl	apply_platform_errata
+
+#if defined(IMAGE_BL31)
+	ldr	x0, =POLICY_SMMU_PAGESZ_64K
+	cbz	x0, 1f
+	/* Set the SMMU page size in the sACR register */
+	bl	_set_smmu_pagesz_64
+#endif
+1:
+	mov	x30, x29
+	ret
+endfunc plat_reset_handler
+
+	/*
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset e.g
+	 * mark the cpu's presence, mechanism to place it in a
+	 * holding pen etc.
+	 */
+func plat_secondary_cold_boot_setup
+	/* ls1088a does not do cold boot for secondary CPU */
+cb_panic:
+	b	cb_panic
+endfunc plat_secondary_cold_boot_setup
+
+	/*
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu.
+	 */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	and	x0, x0, #(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK)
+	cmp	x0, 0x0
+	cset	w0, eq
+	ret
+endfunc plat_is_my_cpu_primary
--- a/plat/nxp/soc-ls1088a/include/soc.h
+++ b/plat/nxp/soc-ls1088a/include/soc.h
@ -0,0 +1,229 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SOC_H
+#define	SOC_H
+
+/* Chassis specific defines - common across SoC's of a particular platform */
+#include "dcfg_lsch3.h"
+#include "soc_default_base_addr.h"
+#include "soc_default_helper_macros.h"
+
+/*
+ * SVR Definition of LS1088A
+ * A: without security
+ * AE: with security
+ * (not include major and minor rev)
+ */
+#define SVR_LS1044A			0x870323
+#define SVR_LS1044AE			0x870322
+#define SVR_LS1048A			0x870321
+#define SVR_LS1048AE			0x870320
+#define SVR_LS1084A			0x870303
+#define SVR_LS1084AE			0x870302
+#define SVR_LS1088A			0x870301
+#define SVR_LS1088AE			0x870300
+
+#define SVR_WO_E			0xFFFFFE
+
+/* Number of cores in platform */
+#define NUMBER_OF_CLUSTERS		2
+#define CORES_PER_CLUSTER		4
+#define PLATFORM_CORE_COUNT		(NUMBER_OF_CLUSTERS * CORES_PER_CLUSTER)
+
+/* set to 0 if the clusters are not symmetrical */
+#define SYMMETRICAL_CLUSTERS		1
+
+
+#define NUM_DRAM_REGIONS		2
+#define	NXP_DRAM0_ADDR			0x80000000
+#define NXP_DRAM0_MAX_SIZE		0x80000000	/*  2 GB  */
+
+#define NXP_DRAM1_ADDR			0x8080000000
+#define NXP_DRAM1_MAX_SIZE		0x7F80000000	/* 510 G */
+
+/* DRAM0 Size defined in platform_def.h */
+#define	NXP_DRAM0_SIZE			PLAT_DEF_DRAM0_SIZE
+
+#define NXP_POWMGTDCR			0x700123C20
+
+/* epu register offsets and values */
+#define EPU_EPGCR_OFFSET		0x0
+#define EPU_EPIMCR10_OFFSET		0x128
+#define EPU_EPCTR10_OFFSET		0xa28
+#define EPU_EPCCR10_OFFSET		0x828
+
+#ifdef EPU_EPCCR10_VAL
+#undef EPU_EPCCR10_VAL
+#endif
+#define EPU_EPCCR10_VAL			0xf2800000
+
+#define EPU_EPIMCR10_VAL		0xba000000
+#define EPU_EPCTR10_VAL			0x0
+#define EPU_EPGCR_VAL			(1 << 31)
+
+/* pmu register offsets and values */
+#define PMU_PCPW20SR_OFFSET		0x830
+#define PMU_CLAINACTSETR_OFFSET		0x1100
+#define PMU_CLAINACTCLRR_OFFSET		0x1104
+#define PMU_CLSINACTSETR_OFFSET		0x1108
+#define PMU_CLSINACTCLRR_OFFSET		0x110C
+#define PMU_CLL2FLUSHSETR_OFFSET	0x1110
+#define PMU_CLSL2FLUSHCLRR_OFFSET	0x1114
+#define PMU_CLL2FLUSHSR_OFFSET		0x1118
+#define PMU_POWMGTCSR_OFFSET		0x4000
+#define PMU_IPPDEXPCR0_OFFSET		0x4040
+#define PMU_IPPDEXPCR1_OFFSET		0x4044
+#define PMU_IPPDEXPCR2_OFFSET		0x4048
+#define PMU_IPPDEXPCR3_OFFSET		0x404C
+#define PMU_IPPDEXPCR4_OFFSET		0x4050
+#define PMU_IPPDEXPCR5_OFFSET		0x4054
+#define PMU_IPSTPCR0_OFFSET		0x4120
+#define PMU_IPSTPCR1_OFFSET		0x4124
+#define PMU_IPSTPCR2_OFFSET		0x4128
+#define PMU_IPSTPCR3_OFFSET		0x412C
+#define PMU_IPSTPCR4_OFFSET		0x4130
+#define PMU_IPSTPCR5_OFFSET		0x4134
+#define PMU_IPSTPCR6_OFFSET		0x4138
+#define PMU_IPSTPACK0_OFFSET		0x4140
+#define PMU_IPSTPACK1_OFFSET		0x4144
+#define PMU_IPSTPACK2_OFFSET		0x4148
+#define PMU_IPSTPACK3_OFFSET		0x414C
+#define PMU_IPSTPACK4_OFFSET		0x4150
+#define PMU_IPSTPACK5_OFFSET		0x4154
+#define PMU_IPSTPACK6_OFFSET		0x4158
+#define PMU_POWMGTCSR_VAL		(1 << 20)
+
+#define IPPDEXPCR0_MASK			0xFFFFFFFF
+#define IPPDEXPCR1_MASK			0xFFFFFFFF
+#define IPPDEXPCR2_MASK			0xFFFFFFFF
+#define IPPDEXPCR3_MASK			0xFFFFFFFF
+#define IPPDEXPCR4_MASK			0xFFFFFFFF
+#define IPPDEXPCR5_MASK			0xFFFFFFFF
+
+/* DEVDISR5_FLX_TMR */
+#define IPPDEXPCR_FLX_TMR		0x00004000
+#define DEVDISR5_FLX_TMR		0x00004000
+
+#define IPSTPCR0_VALUE			0x0041310C
+#define IPSTPCR1_VALUE			0x000003FF
+#define IPSTPCR2_VALUE			0x00013006
+
+/* Dont' stop UART */
+#define IPSTPCR3_VALUE			0x0000033A
+
+#define IPSTPCR4_VALUE			0x00103300
+#define IPSTPCR5_VALUE			0x00000001
+#define IPSTPCR6_VALUE			0x00000000
+
+
+#define TZPC_BLOCK_SIZE			0x1000
+
+/* PORSR1 */
+#define PORSR1_RCW_MASK			0xFF800000
+#define PORSR1_RCW_SHIFT		23
+
+/* CFG_RCW_SRC[6:0] */
+#define RCW_SRC_TYPE_MASK		0x70
+
+/* RCW SRC NOR */
+#define	NOR_16B_VAL			0x20
+
+/*
+ * RCW SRC Serial Flash
+ * 1. SERAIL NOR (QSPI)
+ * 2. OTHERS (SD/MMC, SPI, I2C1)
+ */
+#define RCW_SRC_SERIAL_MASK		0x7F
+#define QSPI_VAL			0x62
+#define SDHC_VAL			0x40
+#define EMMC_VAL			0x41
+
+/*
+ * Required LS standard platform porting definitions
+ * for CCN-504 - Read from RN-F node ID register
+ */
+#define PLAT_CLUSTER_TO_CCN_ID_MAP 1, 9, 11, 19
+
+/* Defines required for using XLAT tables from ARM common code */
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 40)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 40)
+
+/*
+ * Clock Divisors
+ */
+#define NXP_PLATFORM_CLK_DIVIDER	1
+#define NXP_UART_CLK_DIVIDER		2
+
+/* dcfg register offsets and values */
+#define DCFG_DEVDISR1_OFFSET		0x70
+#define DCFG_DEVDISR2_OFFSET		0x74
+#define DCFG_DEVDISR3_OFFSET		0x78
+#define DCFG_DEVDISR5_OFFSET		0x80
+#define DCFG_DEVDISR6_OFFSET		0x84
+
+#define DCFG_DEVDISR1_SEC		(1 << 22)
+#define DCFG_DEVDISR3_QBMAIN		(1 << 12)
+#define DCFG_DEVDISR4_SPI_QSPI		(1 << 4 | 1 << 5)
+#define DCFG_DEVDISR5_MEM		(1 << 0)
+
+#define DEVDISR1_VALUE			0x0041310c
+#define DEVDISR2_VALUE			0x000003ff
+#define DEVDISR3_VALUE			0x00013006
+#define DEVDISR4_VALUE			0x0000033e
+#define DEVDISR5_VALUE			0x00103300
+#define DEVDISR6_VALUE			0x00000001
+
+/*
+ * pwr mgmt features supported in the soc-specific code:
+ * value == 0x0, the soc code does not support this feature
+ * value != 0x0, the soc code supports this feature
+ */
+#define SOC_CORE_RELEASE		0x1
+#define SOC_CORE_RESTART		0x1
+#define SOC_CORE_OFF			0x1
+#define SOC_CORE_STANDBY		0x1
+#define SOC_CORE_PWR_DWN		0x1
+#define SOC_CLUSTER_STANDBY		0x1
+#define SOC_CLUSTER_PWR_DWN		0x1
+#define SOC_SYSTEM_STANDBY		0x1
+#define SOC_SYSTEM_PWR_DWN		0x1
+#define SOC_SYSTEM_OFF			0x1
+#define SOC_SYSTEM_RESET		0x1
+
+#define SYSTEM_PWR_DOMAINS		1
+#define PLAT_NUM_PWR_DOMAINS	(PLATFORM_CORE_COUNT + \
+				NUMBER_OF_CLUSTERS  + \
+				SYSTEM_PWR_DOMAINS)
+
+/* Power state coordination occurs at the system level */
+#define PLAT_PD_COORD_LVL MPIDR_AFFLVL2
+#define PLAT_MAX_PWR_LVL  PLAT_PD_COORD_LVL
+
+/* Local power state for power domains in Run state */
+#define LS_LOCAL_STATE_RUN  PSCI_LOCAL_STATE_RUN
+
+/* define retention state */
+#define PLAT_MAX_RET_STATE  (PSCI_LOCAL_STATE_RUN + 1)
+#define LS_LOCAL_STATE_RET  PLAT_MAX_RET_STATE
+
+/* define power-down state */
+#define PLAT_MAX_OFF_STATE  (PLAT_MAX_RET_STATE + 1)
+#define LS_LOCAL_STATE_OFF  PLAT_MAX_OFF_STATE
+
+#ifndef __ASSEMBLER__
+/* CCI slave interfaces */
+static const int cci_map[] = {
+	3,
+	4,
+};
+void soc_init_lowlevel(void);
+void soc_init_percpu(void);
+void _soc_set_start_addr(unsigned long addr);
+void _set_platform_security(void);
+#endif
+
+#endif /* SOC_H */
--- a/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/ddr_init.c
@ -0,0 +1,84 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <utils.h>
+
+#include <errata.h>
+#include <platform_def.h>
+
+#ifdef CONFIG_STATIC_DDR
+#error No static value defined
+#endif
+
+static const struct rc_timing rce[] = {
+	{U(1600), U(8), U(8)},
+	{U(1867), U(8), U(8)},
+	{U(2134), U(8), U(9)},
+	{}
+};
+
+static const struct board_timing udimm[] = {
+	{U(0x04), rce, U(0x01020307), U(0x08090b06)},
+};
+
+int ddr_board_options(struct ddr_info *priv)
+{
+	int ret;
+	struct memctl_opt *popts = &priv->opt;
+
+	if (popts->rdimm != 0) {
+		debug("RDIMM parameters not set.\n");
+		return -EINVAL;
+	}
+
+	ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm));
+	if (ret != 0) {
+		return ret;
+	}
+
+	popts->addr_hash = 1;
+	popts->cpo_sample = U(0x7b);
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN	|
+			  DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm)	|
+			  DDR_CDR2_VREF_TRAIN_EN		|
+			  DDR_CDR2_VREF_RANGE_2;
+
+	return 0;
+}
+
+long long init_ddr(void)
+{
+	int spd_addr[] = { NXP_SPD_EEPROM0 };
+	struct ddr_info info;
+	struct sysinfo sys;
+	long long dram_size;
+
+	zeromem(&sys, sizeof(sys));
+	get_clocks(&sys);
+	debug("platform clock %lu\n", sys.freq_platform);
+	debug("DDR PLL %lu\n", sys.freq_ddr_pll0);
+
+	zeromem(&info, sizeof(struct ddr_info));
+	info.num_ctlrs = NUM_OF_DDRC;
+	info.dimm_on_ctlr = DDRC_NUM_DIMM;
+	info.clk = get_ddr_freq(&sys, 0);
+	info.spd_addr = spd_addr;
+	info.ddr[0] = (void *)NXP_DDR_ADDR;
+
+	dram_size = dram_init(&info);
+	if (dram_size < 0) {
+		ERROR("DDR init failed.\n");
+	}
+
+	erratum_a008850_post();
+
+	return dram_size;
+}
--- a/plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/plat_def.h
@ -0,0 +1,81 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DEF_H
+#define PLAT_DEF_H
+
+#include <arch.h>
+/*
+ * Required without TBBR.
+ * To include the defines for DDR PHY
+ * Images.
+ */
+#include <tbbr_img_def.h>
+
+#include <policy.h>
+#include <soc.h>
+
+#define NXP_SPD_EEPROM0		0x51
+
+#define NXP_SYSCLK_FREQ		100000000
+#define NXP_DDRCLK_FREQ		100000000
+
+/* UART related definition */
+#define NXP_CONSOLE_ADDR	NXP_UART_ADDR
+#define NXP_CONSOLE_BAUDRATE	115200
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL2)
+#if defined(TRUSTED_BOARD_BOOT)
+#define PLATFORM_STACK_SIZE	0x2000
+#else
+#define PLATFORM_STACK_SIZE	0x1000
+#endif
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE	0x1000
+#endif
+
+#define BL2_START		NXP_OCRAM_ADDR
+#define BL2_LIMIT		(NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
+#define BL2_NOLOAD_START	NXP_OCRAM_ADDR
+#define BL2_NOLOAD_LIMIT	BL2_BASE
+
+/* IO defines as needed by IO driver framework */
+#define MAX_IO_DEVICES		4
+#define MAX_IO_BLOCK_DEVICES	1
+#define MAX_IO_HANDLES		4
+
+/*
+ * FIP image defines - Offset at which FIP Image would be present
+ * Image would include Bl31 , Bl33 and Bl32 (optional)
+ */
+#ifdef POLICY_FUSE_PROVISION
+#define MAX_FIP_DEVICES		2
+#endif
+
+#ifndef MAX_FIP_DEVICES
+#define MAX_FIP_DEVICES		1
+#endif
+
+#define BL32_IRQ_SEC_PHY_TIMER	29
+#define BL31_WDOG_SEC		89
+
+/*
+ * ID of the secure physical generic timer interrupt used by the BL32.
+ */
+#define PLAT_LS_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */
+#define PLAT_LS_G0_IRQ_PROPS(grp)	\
+	INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+
+#endif /* PLAT_DEF_H */
--- a/plat/nxp/soc-ls1088a/ls1088aqds/platform.c
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform.c
@ -0,0 +1,28 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat_common.h>
+
+#pragma weak board_enable_povdd
+#pragma weak board_disable_povdd
+
+bool board_enable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+	return true;
+#else
+	return false;
+#endif
+}
+
+bool board_disable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+	return true;
+#else
+	return false;
+#endif
+}
--- a/plat/nxp/soc-ls1088a/ls1088aqds/platform.mk
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform.mk
@ -0,0 +1,31 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# board-specific build parameters
+BOOT_MODE	?= 	qspi
+BOARD		:=	ls1088aqds
+
+# DDR Compilation Configs
+NUM_OF_DDRC	:=	1
+DDRC_NUM_DIMM	:=      1
+DDR_ECC_EN	:=      yes
+
+# On-Board Flash Details
+QSPI_FLASH_SZ	:=      0x4000000
+NOR_FLASH_SZ	:=	0x20000000
+
+BL2_SOURCES	+=	${BOARD_PATH}/ddr_init.c \
+			${BOARD_PATH}/platform.c
+
+SUPPORTED_BOOT_MODE	:=	qspi	\
+				sd	\
+				nor
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
+include plat/nxp/soc-ls1088a/soc.mk
--- a/plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/platform_def.h
@ -0,0 +1,13 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <plat_def.h>
+#include <plat_default_def.h>
+
+#endif /* PLATFORM_DEF_H */
--- a/plat/nxp/soc-ls1088a/ls1088aqds/policy.h
+++ b/plat/nxp/soc-ls1088a/ls1088aqds/policy.h
@ -0,0 +1,16 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef POLICY_H
+#define	POLICY_H
+
+/*
+ * Set this to 0x0 to leave the default SMMU page size in sACR
+ * Set this to 0x1 to change the SMMU page size to 64K
+ */
+#define POLICY_SMMU_PAGESZ_64K 0x1
+
+#endif /* POLICY_H */
--- a/plat/nxp/soc-ls1088a/ls1088ardb/ddr_init.c
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/ddr_init.c
@ -0,0 +1,86 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <ddr.h>
+#include <utils.h>
+
+#include <errata.h>
+#include <platform_def.h>
+
+#ifdef CONFIG_STATIC_DDR
+#error No static value defined
+#endif
+
+static const struct rc_timing rce[] = {
+	{U(1600), U(8), U(8)},
+	{U(1867), U(8), U(8)},
+	{U(2134), U(8), U(9)},
+	{}
+};
+
+static const struct board_timing udimm[] = {
+	{U(0x04), rce, U(0x01030508), U(0x090b0d06)},
+	{U(0x1f), rce, U(0x01030508), U(0x090b0d06)},
+};
+
+int ddr_board_options(struct ddr_info *priv)
+{
+	int ret;
+	struct memctl_opt *popts = &priv->opt;
+
+	if (popts->rdimm != 0) {
+		debug("RDIMM parameters not set.\n");
+		return -EINVAL;
+	}
+
+	ret = cal_board_params(priv, udimm, ARRAY_SIZE(udimm));
+	if (ret != 0) {
+		return ret;
+	}
+
+	popts->addr_hash = 1;
+	popts->cpo_sample = U(0x7b);
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN	|
+			  DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm)	|
+			  DDR_CDR2_VREF_TRAIN_EN		|
+			  DDR_CDR2_VREF_RANGE_2;
+
+	return 0;
+}
+
+long long init_ddr(void)
+{
+	int spd_addr[] = { NXP_SPD_EEPROM0 };
+	struct ddr_info info;
+	struct sysinfo sys;
+	long long dram_size;
+
+	zeromem(&sys, sizeof(sys));
+	get_clocks(&sys);
+	debug("platform clock %lu\n", sys.freq_platform);
+	debug("DDR PLL %lu\n", sys.freq_ddr_pll0);
+
+	zeromem(&info, sizeof(struct ddr_info));
+	info.num_ctlrs = NUM_OF_DDRC;
+	info.dimm_on_ctlr = DDRC_NUM_DIMM;
+	info.clk = get_ddr_freq(&sys, 0);
+	info.spd_addr = spd_addr;
+	info.ddr[0] = (void *)NXP_DDR_ADDR;
+
+	dram_size = dram_init(&info);
+
+	if (dram_size < 0) {
+		ERROR("DDR init failed.\n");
+	}
+
+	erratum_a008850_post();
+
+	return dram_size;
+}
--- a/plat/nxp/soc-ls1088a/ls1088ardb/plat_def.h
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/plat_def.h
@ -0,0 +1,80 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_DEF_H
+#define PLAT_DEF_H
+
+#include <arch.h>
+/*
+ * Required without TBBR.
+ * To include the defines for DDR PHY
+ * Images.
+ */
+#include <tbbr_img_def.h>
+
+#include <policy.h>
+#include <soc.h>
+
+#define NXP_SPD_EEPROM0		0x51
+
+#define NXP_SYSCLK_FREQ		100000000
+#define NXP_DDRCLK_FREQ		100000000
+
+/* UART related definition */
+#define NXP_CONSOLE_ADDR	NXP_UART_ADDR
+#define NXP_CONSOLE_BAUDRATE	115200
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL2)
+#if defined(TRUSTED_BOARD_BOOT)
+#define PLATFORM_STACK_SIZE	0x2000
+#else
+#define PLATFORM_STACK_SIZE	0x1000
+#endif
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE	0x1000
+#endif
+
+#define BL2_START		NXP_OCRAM_ADDR
+#define BL2_LIMIT		(NXP_OCRAM_ADDR + NXP_OCRAM_SIZE)
+#define BL2_NOLOAD_START	NXP_OCRAM_ADDR
+#define BL2_NOLOAD_LIMIT	BL2_BASE
+
+/* IO defines as needed by IO driver framework */
+#define MAX_IO_DEVICES		4
+#define MAX_IO_BLOCK_DEVICES	1
+#define MAX_IO_HANDLES		4
+
+/*
+ * FIP image defines - Offset at which FIP Image would be present
+ * Image would include Bl31 , Bl33 and Bl32 (optional)
+ */
+#ifdef POLICY_FUSE_PROVISION
+#define MAX_FIP_DEVICES		2
+#endif
+
+#ifndef MAX_FIP_DEVICES
+#define MAX_FIP_DEVICES		1
+#endif
+
+#define BL32_IRQ_SEC_PHY_TIMER	29
+#define BL31_WDOG_SEC		89
+
+/*
+ * ID of the secure physical generic timer interrupt used by the BL32.
+ */
+#define PLAT_LS_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(BL32_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+/* SGI 15 and Secure watchdog interrupts assigned to Group 0 */
+#define PLAT_LS_G0_IRQ_PROPS(grp)	\
+	INTR_PROP_DESC(BL31_WDOG_SEC, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(15, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL)
+
+#endif /* PLAT_DEF_H */
--- a/plat/nxp/soc-ls1088a/ls1088ardb/platform.c
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/platform.c
@ -0,0 +1,28 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat_common.h>
+
+#pragma weak board_enable_povdd
+#pragma weak board_disable_povdd
+
+bool board_enable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+	return true;
+#else
+	return false;
+#endif
+}
+
+bool board_disable_povdd(void)
+{
+#ifdef CONFIG_POVDD_ENABLE
+	return true;
+#else
+	return false;
+#endif
+}
--- a/plat/nxp/soc-ls1088a/ls1088ardb/platform.mk
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/platform.mk
@ -0,0 +1,30 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# board-specific build parameters
+BOOT_MODE	?= 	qspi
+BOARD		:=	ls1088ardb
+
+# DDR Compilation Configs
+NUM_OF_DDRC	:=	1
+DDRC_NUM_DIMM	:=      1
+DDR_ECC_EN	:=      yes
+
+# On-Board Flash Details
+QSPI_FLASH_SZ	:=      0x4000000
+
+# Adding Platform files build files
+BL2_SOURCES	+=	${BOARD_PATH}/ddr_init.c \
+			${BOARD_PATH}/platform.c
+
+SUPPORTED_BOOT_MODE	:=	qspi	\
+				sd
+
+# Adding platform board build info
+include plat/nxp/common/plat_make_helper/plat_common_def.mk
+
+# Adding SoC build info
+include plat/nxp/soc-ls1088a/soc.mk
--- a/plat/nxp/soc-ls1088a/ls1088ardb/platform_def.h
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/platform_def.h
@ -0,0 +1,13 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <plat_def.h>
+#include <plat_default_def.h>
+
+#endif /* PLATFORM_DEF_H */
--- a/plat/nxp/soc-ls1088a/ls1088ardb/policy.h
+++ b/plat/nxp/soc-ls1088a/ls1088ardb/policy.h
@ -0,0 +1,15 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef POLICY_H
+#define POLICY_H
+
+/* Set this to 0x0 to leave the default SMMU page size in sACR
+ * Set this to 0x1 to change the SMMU page size to 64K
+ */
+#define POLICY_SMMU_PAGESZ_64K 0x1
+
+#endif /* POLICY_H */
--- a/plat/nxp/soc-ls1088a/soc.c
+++ b/plat/nxp/soc-ls1088a/soc.c
@ -0,0 +1,397 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <caam.h>
+#include <cci.h>
+#include <common/debug.h>
+#include <dcfg.h>
+#ifdef I2C_INIT
+#include <i2c.h>
+#endif
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+#include <ls_interconnect.h>
+#if TRUSTED_BOARD_BOOT
+#include <nxp_smmu.h>
+#endif
+#include <nxp_timer.h>
+#include <plat_console.h>
+#include <plat_gic.h>
+#include <plat_tzc400.h>
+#include <pmu.h>
+#if defined(NXP_SFP_ENABLED)
+#include <sfp.h>
+#endif
+
+#include <errata.h>
+#ifdef CONFIG_OCRAM_ECC_EN
+#include <ocram.h>
+#endif
+#include <plat_common.h>
+#include <platform_def.h>
+#include <soc.h>
+
+static unsigned char _power_domain_tree_desc[NUMBER_OF_CLUSTERS + 2];
+static struct soc_type soc_list[] =  {
+	SOC_ENTRY(LS1044A, LS1044A, 1, 4),
+	SOC_ENTRY(LS1044AE, LS1044AE, 1, 4),
+	SOC_ENTRY(LS1048A, LS1048A, 1, 4),
+	SOC_ENTRY(LS1048AE, LS1048AE, 1, 4),
+	SOC_ENTRY(LS1084A, LS1084A, 2, 4),
+	SOC_ENTRY(LS1084AE, LS1084AE, 2, 4),
+	SOC_ENTRY(LS1088A, LS1088A, 2, 4),
+	SOC_ENTRY(LS1088AE, LS1088AE, 2, 4),
+};
+
+static dcfg_init_info_t dcfg_init_data = {
+	.g_nxp_dcfg_addr = NXP_DCFG_ADDR,
+	.nxp_sysclk_freq = NXP_SYSCLK_FREQ,
+	.nxp_ddrclk_freq = NXP_DDRCLK_FREQ,
+	.nxp_plat_clk_divider = NXP_PLATFORM_CLK_DIVIDER,
+};
+
+/*
+ * This function dynamically constructs the topology according to
+ *  SoC Flavor and returns it.
+ */
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	unsigned int i;
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	/*
+	 * The highest level is the system level. The next level is constituted
+	 * by clusters and then cores in clusters.
+	 */
+	_power_domain_tree_desc[0] = 1;
+	_power_domain_tree_desc[1] = num_clusters;
+
+	for (i = 0; i < _power_domain_tree_desc[1]; i++) {
+		_power_domain_tree_desc[i + 2] = cores_per_cluster;
+	}
+
+
+	return _power_domain_tree_desc;
+}
+
+CASSERT(NUMBER_OF_CLUSTERS && NUMBER_OF_CLUSTERS <= 256,
+		assert_invalid_ls1088a_cluster_count);
+
+/*
+ * This function returns the core count within the cluster corresponding to
+ * `mpidr`.
+ */
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr)
+{
+	return CORES_PER_CLUSTER;
+}
+
+/*
+ * This function returns the total number of cores in the SoC
+ */
+unsigned int get_tot_num_cores(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	return (num_clusters * cores_per_cluster);
+}
+
+/*
+ * This function returns the PMU IDLE Cluster mask.
+ */
+unsigned int get_pmu_idle_cluster_mask(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	return ((1 << num_clusters) - 2);
+}
+
+/*
+ * This function returns the PMU Flush Cluster mask.
+ */
+unsigned int get_pmu_flush_cluster_mask(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+
+	return ((1 << num_clusters) - 2);
+}
+
+/*
+ * This function returns the PMU IDLE Core mask.
+ */
+unsigned int get_pmu_idle_core_mask(void)
+{
+	return ((1 << get_tot_num_cores()) - 2);
+}
+
+#ifdef IMAGE_BL2
+
+void soc_bl2_prepare_exit(void)
+{
+#if defined(NXP_SFP_ENABLED) && defined(DISABLE_FUSE_WRITE)
+	set_sfp_wr_disable();
+#endif
+}
+
+void soc_preload_setup(void)
+{
+
+}
+
+/*
+ * This function returns the boot device based on RCW_SRC
+ */
+enum boot_device get_boot_dev(void)
+{
+	enum boot_device src = BOOT_DEVICE_NONE;
+	uint32_t porsr1;
+	uint32_t rcw_src, val;
+
+	porsr1 = read_reg_porsr1();
+
+	rcw_src = (porsr1 & PORSR1_RCW_MASK) >> PORSR1_RCW_SHIFT;
+
+	/* RCW SRC NOR */
+	val = rcw_src & RCW_SRC_TYPE_MASK;
+	if (val == NOR_16B_VAL) {
+		src = BOOT_DEVICE_IFC_NOR;
+		INFO("RCW BOOT SRC is IFC NOR\n");
+	} else {
+		val = rcw_src & RCW_SRC_SERIAL_MASK;
+		switch (val) {
+		case QSPI_VAL:
+			src = BOOT_DEVICE_QSPI;
+			INFO("RCW BOOT SRC is QSPI\n");
+			break;
+		case SDHC_VAL:
+			src = BOOT_DEVICE_EMMC;
+			INFO("RCW BOOT SRC is SD/EMMC\n");
+			break;
+		case EMMC_VAL:
+			src = BOOT_DEVICE_EMMC;
+			INFO("RCW BOOT SRC is SD/EMMC\n");
+			break;
+		default:
+			src = BOOT_DEVICE_NONE;
+		}
+	}
+
+	return src;
+}
+
+/*
+ * This function sets up access permissions on memory regions
+ */
+void soc_mem_access(void)
+{
+	dram_regions_info_t *info_dram_regions = get_dram_regions_info();
+	int i = 0;
+	struct tzc400_reg tzc400_reg_list[MAX_NUM_TZC_REGION];
+	int dram_idx, index = 1;
+
+	for (dram_idx = 0; dram_idx < info_dram_regions->num_dram_regions;
+	     dram_idx++) {
+		if (info_dram_regions->region[i].size == 0) {
+			ERROR("DDR init failure, or");
+			ERROR("DRAM regions not populated correctly.\n");
+			break;
+		}
+
+		index = populate_tzc400_reg_list(tzc400_reg_list,
+				dram_idx, index,
+				info_dram_regions->region[dram_idx].addr,
+				info_dram_regions->region[dram_idx].size,
+				NXP_SECURE_DRAM_SIZE, NXP_SP_SHRD_DRAM_SIZE);
+	}
+
+	mem_access_setup(NXP_TZC_ADDR, index,
+			 tzc400_reg_list);
+}
+
+/*
+ * This function implements soc specific erratum
+ * This is called before DDR is initialized or MMU is enabled
+ */
+void soc_early_init(void)
+{
+	enum boot_device dev;
+	dram_regions_info_t *dram_regions_info = get_dram_regions_info();
+
+#ifdef CONFIG_OCRAM_ECC_EN
+	ocram_init(NXP_OCRAM_ADDR, NXP_OCRAM_SIZE);
+#endif
+	dcfg_init(&dcfg_init_data);
+#if LOG_LEVEL > 0
+	/* Initialize the console to provide early debug support */
+	plat_console_init(NXP_CONSOLE_ADDR,
+			  NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+	enable_timer_base_to_cluster(NXP_PMU_ADDR);
+	enable_core_tb(NXP_PMU_ADDR);
+
+	/*
+	 * Use the region(NXP_SD_BLOCK_BUF_ADDR + NXP_SD_BLOCK_BUF_SIZE)
+	 * as dma of sd
+	 */
+	dev = get_boot_dev();
+	if (dev == BOOT_DEVICE_EMMC) {
+		mmap_add_region(NXP_SD_BLOCK_BUF_ADDR, NXP_SD_BLOCK_BUF_ADDR,
+				NXP_SD_BLOCK_BUF_SIZE,
+				MT_DEVICE | MT_RW | MT_NS);
+	}
+
+#if TRUSTED_BOARD_BOOT
+	uint32_t mode;
+
+	sfp_init(NXP_SFP_ADDR);
+	/*
+	 * For secure boot disable SMMU.
+	 * Later when platform security policy comes in picture,
+	 * this might get modified based on the policy
+	 */
+	if (check_boot_mode_secure(&mode) == true) {
+		bypass_smmu(NXP_SMMU_ADDR);
+	}
+
+	/*
+	 * For Mbedtls currently crypto is not supported via CAAM
+	 * enable it when that support is there. In tbbr.mk
+	 * the CAAM_INTEG is set as 0.
+	 */
+#ifndef MBEDTLS_X509
+	/* Initialize the crypto accelerator if enabled */
+	if (is_sec_enabled() == false) {
+		INFO("SEC is disabled.\n");
+	} else {
+		sec_init(NXP_CAAM_ADDR);
+	}
+#endif
+#endif
+
+	soc_errata();
+
+	delay_timer_init(NXP_TIMER_ADDR);
+	i2c_init(NXP_I2C_ADDR);
+	dram_regions_info->total_dram_size = init_ddr();
+}
+#else /* !IMAGE_BL2 */
+
+void soc_early_platform_setup2(void)
+{
+	dcfg_init(&dcfg_init_data);
+	/*
+	 * Initialize system level generic timer for Socs
+	 */
+	delay_timer_init(NXP_TIMER_ADDR);
+
+#if LOG_LEVEL > 0
+	/* Initialize the console to provide early debug support */
+	plat_console_init(NXP_CONSOLE_ADDR,
+			  NXP_UART_CLK_DIVIDER, NXP_CONSOLE_BAUDRATE);
+#endif
+}
+
+void soc_platform_setup(void)
+{
+	/* Initialize the GIC driver, cpu and distributor interfaces */
+	static uintptr_t target_mask_array[PLATFORM_CORE_COUNT];
+	static interrupt_prop_t ls_interrupt_props[] = {
+		PLAT_LS_G1S_IRQ_PROPS(INTR_GROUP1S),
+		PLAT_LS_G0_IRQ_PROPS(INTR_GROUP0)
+	};
+
+	plat_ls_gic_driver_init(NXP_GICD_ADDR, NXP_GICR_ADDR,
+				PLATFORM_CORE_COUNT,
+				ls_interrupt_props,
+				ARRAY_SIZE(ls_interrupt_props),
+				target_mask_array,
+				plat_core_pos);
+
+	plat_ls_gic_init();
+	enable_init_timer();
+}
+
+/*
+ * This function initializes the soc from the BL31 module
+ */
+void soc_init(void)
+{
+	uint8_t num_clusters, cores_per_cluster;
+
+	/* low-level init of the soc */
+	soc_init_lowlevel();
+	_init_global_data();
+	soc_init_percpu();
+	_initialize_psci();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	cci_init(NXP_CCI_ADDR, cci_map, ARRAY_SIZE(cci_map));
+
+	/*
+	 * Enable Interconnect coherency for the primary CPU's cluster.
+	 */
+	get_cluster_info(soc_list, ARRAY_SIZE(soc_list), &num_clusters, &cores_per_cluster);
+	plat_ls_interconnect_enter_coherency(num_clusters);
+
+	/* set platform security policies */
+	_set_platform_security();
+
+	/* Initialize the crypto accelerator if enabled */
+	if (is_sec_enabled() == false) {
+		INFO("SEC is disabled.\n");
+	} else {
+		sec_init(NXP_CAAM_ADDR);
+	}
+}
+
+void soc_runtime_setup(void)
+{
+
+}
+#endif /* IMAGE_BL2 */
+
+/*
+ * Function to return the SoC SYS CLK
+ */
+unsigned int get_sys_clk(void)
+{
+	return NXP_SYSCLK_FREQ;
+}
+
+/*
+ * Function returns the base counter frequency
+ * after reading the first entry at CNTFID0 (0x20 offset).
+ *
+ * Function is used by:
+ *   1. ARM common code for PSCI management.
+ *   2. ARM Generic Timer init.
+ */
+unsigned int plat_get_syscnt_freq2(void)
+{
+	unsigned int counter_base_frequency;
+	/*
+	 * Below register specifies the base frequency of the system counter.
+	 * As per NXP Board Manuals:
+	 * The system counter always works with SYS_REF_CLK/4 frequency clock.
+	 */
+	counter_base_frequency = mmio_read_32(NXP_TIMER_ADDR + CNTFID_OFF);
+
+	return counter_base_frequency;
+}
--- a/plat/nxp/soc-ls1088a/soc.def
+++ b/plat/nxp/soc-ls1088a/soc.def
@ -0,0 +1,87 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+#------------------------------------------------------------------------------
+#
+# This file contains the basic architecture definitions that drive the build
+#
+# -----------------------------------------------------------------------------
+
+CORE_TYPE		:=	a53
+
+CACHE_LINE		:=	6
+
+# Set to GIC400 or GIC500
+GIC			:=	GIC500
+
+# Set to CCI400 or CCN504 or CCN508
+INTERCONNECT		:=	CCI400
+
+# Select the DDR PHY generation to be used
+PLAT_DDR_PHY		:=	PHY_GEN1
+
+PHYS_SYS		:=	64
+
+# Indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
+CHASSIS			:=	3
+
+# TZC IP Details TZC used is TZC380 or TZC400
+TZC_ID			:=	TZC400
+
+# CONSOLE Details available is NS16550 or PL011
+CONSOLE			:=	NS16550
+
+NXP_SFP_VER		:=	3_4
+
+# In IMAGE_BL2, compile time flag for handling Cache coherency
+# with CAAM for BL2 running from OCRAM
+SEC_MEM_NON_COHERENT	:=	yes
+
+
+# OCRAM MAP for BL2
+# Before BL2
+# 0x18000000 - 0x18009fff -> Used by ROM code, (TBD - can it be used for xlat tables)
+# 0x1800a000 - 0x1801Cfff -> Reserved for BL2 binary (76 KB)
+# 0x1801D000 - 0x1801ffff -> CSF header for BL2 (12 KB)
+OCRAM_START_ADDR	:=	0x18000000
+OCRAM_SIZE		:=	0x20000
+
+CSF_HDR_SZ		:=	0x3000
+
+# Area of OCRAM reserved by ROM code
+NXP_ROM_RSVD		:=	0xa000
+
+# Input to CST create_hdr_isbc tool
+BL2_HDR_LOC		:=	0x1801D000
+
+# Location of BL2 on OCRAM
+# BL2_BASE=OCRAM_START_ADDR+NXP_ROM_RSVD
+BL2_BASE		:=	0x1800a000
+
+# SoC ERRATUM to be enabled
+ERRATA_SOC_A008850	:=	1
+
+# ARM Erratum
+ERRATA_A53_855873	:=	1
+
+# DDR Erratum
+ERRATA_DDR_A008511	:=	1
+ERRATA_DDR_A009803	:=	1
+ERRATA_DDR_A009942	:=	1
+ERRATA_DDR_A010165	:=	1
+
+# Define Endianness of each module
+NXP_ESDHC_ENDIANNESS	:=	LE
+NXP_SFP_ENDIANNESS	:=	LE
+NXP_GPIO_ENDIANNESS	:=	LE
+NXP_SNVS_ENDIANNESS	:=	LE
+NXP_GUR_ENDIANNESS	:=	LE
+NXP_SEC_ENDIANNESS	:=	LE
+NXP_DDR_ENDIANNESS	:=	LE
+NXP_QSPI_ENDIANNESS	:=	LE
+
+# OCRAM ECC Enabled
+OCRAM_ECC_EN		:=	yes
--- a/plat/nxp/soc-ls1088a/soc.mk
+++ b/plat/nxp/soc-ls1088a/soc.mk
@ -0,0 +1,110 @@
+#
+# Copyright 2022 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# SoC-specific build parameters
+SOC		:=	ls1088a
+PLAT_PATH	:=	plat/nxp
+PLAT_COMMON_PATH:=	plat/nxp/common
+PLAT_DRIVERS_PATH:=	drivers/nxp
+PLAT_SOC_PATH	:=	${PLAT_PATH}/soc-${SOC}
+BOARD_PATH	:=	${PLAT_SOC_PATH}/${BOARD}
+
+# Separate BL2 NOLOAD region (.bss, stack, page tables). need to
+# define BL2_NOLOAD_START and BL2_NOLOAD_LIMIT
+SEPARATE_BL2_NOLOAD_REGION	:= 1
+
+# get SoC-specific defnitions
+include ${PLAT_SOC_PATH}/soc.def
+include ${PLAT_COMMON_PATH}/plat_make_helper/soc_common_def.mk
+include ${PLAT_COMMON_PATH}/plat_make_helper/plat_build_macros.mk
+
+# For Security Features
+DISABLE_FUSE_WRITE	:= 1
+ifeq (${TRUSTED_BOARD_BOOT}, 1)
+ifeq (${GENERATE_COT},1)
+# Save Keys to be used by DDR FIP image
+SAVE_KEYS=1
+endif
+$(eval $(call SET_NXP_MAKE_FLAG,SMMU_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,SFP_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,SNVS_NEEDED,BL2))
+# Used by create_pbl tool to
+# create bl2_<boot_mode>_sec.pbl image
+SECURE_BOOT	:= yes
+endif
+$(eval $(call SET_NXP_MAKE_FLAG,CRYPTO_NEEDED,BL_COMM))
+
+# Selecting Drivers for SoC
+$(eval $(call SET_NXP_MAKE_FLAG,DCFG_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,TIMER_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,INTERCONNECT_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,GIC_NEEDED,BL31))
+$(eval $(call SET_NXP_MAKE_FLAG,CONSOLE_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,PMU_NEEDED,BL_COMM))
+$(eval $(call SET_NXP_MAKE_FLAG,DDR_DRIVER_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,TZASC_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,I2C_NEEDED,BL2))
+$(eval $(call SET_NXP_MAKE_FLAG,IMG_LOADR_NEEDED,BL2))
+
+# Selecting PSCI & SIP_SVC support
+$(eval $(call SET_NXP_MAKE_FLAG,PSCI_NEEDED,BL31))
+$(eval $(call SET_NXP_MAKE_FLAG,SIPSVC_NEEDED,BL31))
+
+
+# Adding SoC specific files
+include ${PLAT_COMMON_PATH}/soc_errata/errata.mk
+
+PLAT_INCLUDES	+=	-I${PLAT_COMMON_PATH}/include/default\
+			-I${BOARD_PATH}\
+			-I${PLAT_COMMON_PATH}/include/default/ch_${CHASSIS}\
+			-I${PLAT_COMMON_PATH}/soc_errata\
+			-I${PLAT_COMMON_PATH}/include\
+			-I${PLAT_SOC_PATH}/include
+
+ifeq (${SECURE_BOOT},yes)
+include ${PLAT_COMMON_PATH}/tbbr/tbbr.mk
+endif
+
+ifeq (${PSCI_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/psci/psci.mk
+endif
+
+ifeq (${SIPSVC_NEEDED}, yes)
+include ${PLAT_COMMON_PATH}/sip_svc/sipsvc.mk
+endif
+
+# for fuse-fip & fuse-programming
+ifeq (${FUSE_PROG}, 1)
+include ${PLAT_COMMON_PATH}/fip_handler/fuse_fip/fuse.mk
+endif
+
+ifeq (${IMG_LOADR_NEEDED},yes)
+include $(PLAT_COMMON_PATH)/img_loadr/img_loadr.mk
+endif
+
+# Adding source files for the above selected drivers.
+include ${PLAT_DRIVERS_PATH}/drivers.mk
+
+PLAT_BL_COMMON_SOURCES	+=	${PLAT_COMMON_PATH}/$(ARCH)/ls_helpers.S\
+				${PLAT_SOC_PATH}/${ARCH}/${SOC}_helpers.S\
+				${PLAT_SOC_PATH}/soc.c
+
+BL31_SOURCES	+=	${PLAT_SOC_PATH}/$(ARCH)/${SOC}.S\
+			${PSCI_SOURCES}\
+			${SIPSVC_SOURCES}\
+			${PLAT_COMMON_PATH}/$(ARCH)/bl31_data.S
+
+ifeq (${TEST_BL31}, 1)
+BL31_SOURCES	+=	${PLAT_SOC_PATH}/$(ARCH)/bootmain64.S  \
+			${PLAT_SOC_PATH}/$(ARCH)/nonboot64.S
+endif
+
+BL2_SOURCES		+=	${DDR_CNTLR_SOURCES}\
+				${TBBR_SOURCES}\
+				${FUSE_SOURCES}
+
+# Adding TFA setup files
+include ${PLAT_PATH}/common/setup/common.mk
--- a/plat/nxp/soc-lx2160a/soc.def
+++ b/plat/nxp/soc-lx2160a/soc.def
@ -1,6 +1,6 @@
 #
 # Copyright (c) 2015, 2016 Freescale Semiconductor, Inc.
-# Copyright 2017-2020 NXP Semiconductors
+# Copyright 2017-2022 NXP Semiconductors
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@ -107,5 +107,10 @@ ERRATA_A72_859971	:= 1
 # SoC Errata
 ERRATA_SOC_A050426	:= 1

+# DDR Errata
+ERRATA_DDR_A011396	:= 1
+ERRATA_DDR_A050450	:= 1
+ERRATA_DDR_A050958	:= 1
+
 # enable dynamic memory mapping
 PLAT_XLAT_TABLES_DYNAMIC :=	1
--- a/tools/nxp/create_pbl/create_pbl.c
+++ b/tools/nxp/create_pbl/create_pbl.c
@ -1,5 +1,5 @@
 /*
- * Copyright 2021 NXP
+ * Copyright 2021-2022 NXP
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
@ -507,7 +507,9 @@ int add_boot_ptr_cmd(FILE *fp_rcw_pbi_op)
 		}
 	}

-	printf("\nBoot Location Pointer= %x\n", BYTE_SWAP_32(pblimg.ep));
+	printf("\nBoot Location Pointer= 0x%x\n",
+	       pblimg.chassis == CHASSIS_2 ? BYTE_SWAP_32(pblimg.ep) :
+	       pblimg.ep);
 	ret = SUCCESS;

 bootptr_err:
--- a/tools/nxp/create_pbl/pbl_ch3.mk
+++ b/tools/nxp/create_pbl/pbl_ch3.mk
@ -1,5 +1,5 @@
 #
-# Copyright 2018-2020 NXP
+# Copyright 2018-2022 NXP
 #
 # SPDX-License-Identifier: BSD-3-Clause
 #
@ -63,7 +63,7 @@ else
 	-o ${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl -f ${BL2_SRC_OFFSET};

 	# Append the bl2.bin to the RCW image
-	@echo "bl2_loc is ${bl2_offset}"
+	@echo "bl2_loc is ${bl2_loc} KB"
 	dd if=${BUILD_PLAT}/bl2.bin of=${BUILD_PLAT}/bl2_${BOOT_MODE}.pbl bs=1K seek=${bl2_loc}

 	cd ${CREATE_PBL_TOOL_PATH}; ${MAKE} clean ; cd -;