Merge pull request #1224 from masahir0y/gzip
Support GZIP-compressed images for faster loading and verification
This commit is contained in:
davidcunado-arm
GitHub
commit
9fd2f13bd6
24
Makefile
24
Makefile
|
|
@ -193,6 +193,7 @@ BL_COMMON_SOURCES += common/bl_common.c \
|
|||
lib/${ARCH}/cache_helpers.S \
|
||||
lib/${ARCH}/misc_helpers.S \
|
||||
plat/common/plat_log_common.c \
|
||||
plat/common/platform_helpers_default.c \
|
||||
plat/common/${ARCH}/plat_common.c \
|
||||
plat/common/${ARCH}/platform_helpers.S \
|
||||
${COMPILER_RT_SRCS} \
|
||||
|
|
@ -598,38 +599,39 @@ ifeq (${BL2_AT_EL3}, 0)
|
|||
FIP_BL2_ARGS := tb-fw
|
||||
endif
|
||||
|
||||
$(if ${BL2}, $(eval $(call MAKE_TOOL_ARGS,2,${BL2},${FIP_BL2_ARGS})),\
|
||||
$(if ${BL2}, $(eval $(call TOOL_ADD_IMG,bl2,--${FIP_BL2_ARGS})),\
|
||||
$(eval $(call MAKE_BL,2,${FIP_BL2_ARGS})))
|
||||
endif
|
||||
|
||||
ifeq (${NEED_SCP_BL2},yes)
|
||||
$(eval $(call FIP_ADD_IMG,SCP_BL2,--scp-fw))
|
||||
$(eval $(call TOOL_ADD_IMG,scp_bl2,--scp-fw))
|
||||
endif
|
||||
|
||||
ifeq (${NEED_BL31},yes)
|
||||
BL31_SOURCES += ${SPD_SOURCES}
|
||||
$(if ${BL31}, $(eval $(call MAKE_TOOL_ARGS,31,${BL31},soc-fw)),\
|
||||
$(if ${BL31}, $(eval $(call TOOL_ADD_IMG,bl31,--soc-fw)),\
|
||||
$(eval $(call MAKE_BL,31,soc-fw)))
|
||||
endif
|
||||
|
||||
# If a BL32 image is needed but neither BL32 nor BL32_SOURCES is defined, the
|
||||
# build system will call FIP_ADD_IMG to print a warning message and abort the
|
||||
# build system will call TOOL_ADD_IMG to print a warning message and abort the
|
||||
# process. Note that the dependency on BL32 applies to the FIP only.
|
||||
ifeq (${NEED_BL32},yes)
|
||||
$(if ${BL32}, $(eval $(call MAKE_TOOL_ARGS,32,${BL32},tos-fw)),\
|
||||
$(if ${BL32_SOURCES}, $(eval $(call MAKE_BL,32,tos-fw)),\
|
||||
$(eval $(call FIP_ADD_IMG,BL32,--tos-fw))))
|
||||
|
||||
BUILD_BL32 := $(if $(BL32),,$(if $(BL32_SOURCES),1))
|
||||
|
||||
$(if ${BUILD_BL32}, $(eval $(call MAKE_BL,32,tos-fw)),\
|
||||
$(eval $(call TOOL_ADD_IMG,bl32,--tos-fw)))
|
||||
endif
|
||||
|
||||
# Add the BL33 image if required by the platform
|
||||
ifeq (${NEED_BL33},yes)
|
||||
$(eval $(call FIP_ADD_IMG,BL33,--nt-fw))
|
||||
$(eval $(call TOOL_ADD_IMG,bl33,--nt-fw))
|
||||
endif
|
||||
|
||||
ifeq (${NEED_BL2U},yes)
|
||||
BL2U_PATH := $(if ${BL2U},${BL2U},$(call IMG_BIN,2u))
|
||||
$(if ${BL2U}, ,$(eval $(call MAKE_BL,2u)))
|
||||
$(eval $(call FWU_FIP_ADD_PAYLOAD,${BL2U_PATH},--ap-fwu-cfg))
|
||||
$(if ${BL2U}, $(eval $(call TOOL_ADD_IMG,bl2u,--ap-fwu-cfg,FWU_)),\
|
||||
$(eval $(call MAKE_BL,2u,ap-fwu-cfg,FWU_)))
|
||||
endif
|
||||
|
||||
# Expand build macros for the different images
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
|
||||
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
|
@ -178,6 +178,12 @@ void bl1_load_bl2(void)
|
|||
INFO("BL1: Loading BL2\n");
|
||||
|
||||
#if LOAD_IMAGE_V2
|
||||
err = bl1_plat_handle_pre_image_load();
|
||||
if (err) {
|
||||
ERROR("Failure in pre image load handling of BL2 (%d)\n", err);
|
||||
plat_error_handler(err);
|
||||
}
|
||||
|
||||
err = load_auth_image(BL2_IMAGE_ID, image_info);
|
||||
#else
|
||||
/* Load the BL2 image */
|
||||
|
|
@ -194,6 +200,14 @@ void bl1_load_bl2(void)
|
|||
plat_error_handler(err);
|
||||
}
|
||||
|
||||
#if LOAD_IMAGE_V2
|
||||
/* Allow platform to handle image information. */
|
||||
err = bl1_plat_handle_post_image_load();
|
||||
if (err) {
|
||||
ERROR("Failure in post image load handling of BL2 (%d)\n", err);
|
||||
plat_error_handler(err);
|
||||
}
|
||||
|
||||
/*
|
||||
* Create a new layout of memory for BL2 as seen by BL1 i.e.
|
||||
* tell it the amount of total and free memory available.
|
||||
|
|
@ -201,7 +215,6 @@ void bl1_load_bl2(void)
|
|||
* to BL2. BL2 will read the memory layout before using its
|
||||
* memory for other purposes.
|
||||
*/
|
||||
#if LOAD_IMAGE_V2
|
||||
bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->total_base;
|
||||
#else
|
||||
bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->free_base;
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
|
||||
* Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
|
@ -54,6 +54,12 @@ entry_point_info_t *bl2_load_images(void)
|
|||
}
|
||||
}
|
||||
|
||||
err = bl2_plat_handle_pre_image_load(bl2_node_info->image_id);
|
||||
if (err) {
|
||||
ERROR("BL2: Failure in pre image load handling (%i)\n", err);
|
||||
plat_error_handler(err);
|
||||
}
|
||||
|
||||
if (!(bl2_node_info->image_info->h.attr & IMAGE_ATTRIB_SKIP_LOADING)) {
|
||||
INFO("BL2: Loading image id %d\n", bl2_node_info->image_id);
|
||||
err = load_auth_image(bl2_node_info->image_id,
|
||||
|
|
|
|||
|
|
@ -0,0 +1,79 @@
|
|||
/*
|
||||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#include <arch_helpers.h>
|
||||
#include <assert.h>
|
||||
#include <bl_common.h>
|
||||
#include <debug.h>
|
||||
#include <image_decompress.h>
|
||||
#include <stdint.h>
|
||||
|
||||
static uintptr_t decompressor_buf_base;
|
||||
static uint32_t decompressor_buf_size;
|
||||
static decompressor_t *decompressor;
|
||||
static struct image_info saved_image_info;
|
||||
|
||||
void image_decompress_init(uintptr_t buf_base, uint32_t buf_size,
|
||||
decompressor_t *_decompressor)
|
||||
{
|
||||
decompressor_buf_base = buf_base;
|
||||
decompressor_buf_size = buf_size;
|
||||
decompressor = _decompressor;
|
||||
}
|
||||
|
||||
void image_decompress_prepare(struct image_info *info)
|
||||
{
|
||||
/*
|
||||
* If the image is compressed, it should be loaded into the temporary
|
||||
* buffer instead of its final destination. We save image_info, then
|
||||
* override ->image_base and ->image_max_size so that load_image() will
|
||||
* transfer the compressed data to the temporary buffer.
|
||||
*/
|
||||
saved_image_info = *info;
|
||||
info->image_base = decompressor_buf_base;
|
||||
info->image_max_size = decompressor_buf_size;
|
||||
}
|
||||
|
||||
int image_decompress(struct image_info *info)
|
||||
{
|
||||
uintptr_t compressed_image_base, image_base, work_base;
|
||||
uint32_t compressed_image_size, work_size;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* The size of compressed data has been filled by load_image().
|
||||
* Read it out before restoring image_info.
|
||||
*/
|
||||
compressed_image_size = info->image_size;
|
||||
compressed_image_base = info->image_base;
|
||||
*info = saved_image_info;
|
||||
|
||||
assert(compressed_image_size <= decompressor_buf_size);
|
||||
|
||||
image_base = info->image_base;
|
||||
|
||||
/*
|
||||
* Use the rest of the temporary buffer as workspace of the
|
||||
* decompressor since the decompressor may need additional memory.
|
||||
*/
|
||||
work_base = compressed_image_base + compressed_image_size;
|
||||
work_size = decompressor_buf_size - compressed_image_size;
|
||||
|
||||
ret = decompressor(&compressed_image_base, compressed_image_size,
|
||||
&image_base, info->image_max_size,
|
||||
work_base, work_size);
|
||||
if (ret) {
|
||||
ERROR("Failed to decompress image (err=%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* image_base is updated to the final pos when decompressor() exits. */
|
||||
info->image_size = image_base - info->image_base;
|
||||
|
||||
flush_dcache_range(info->image_base, info->image_size);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1259,6 +1259,30 @@ standard platforms return an image descriptor corresponding to BL2 or one of
|
|||
the firmware update images defined in the Trusted Board Boot Requirements
|
||||
specification.
|
||||
|
||||
Function : bl1\_plat\_handle\_pre\_image\_load() [optional]
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
::
|
||||
|
||||
Argument : void
|
||||
Return : int
|
||||
|
||||
This function can be used by the platforms to update/use image information
|
||||
for BL2. This function is currently invoked in BL1 before loading BL2,
|
||||
when LOAD\_IMAGE\_V2 is enabled.
|
||||
|
||||
Function : bl1\_plat\_handle\_post\_image\_load() [optional]
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
::
|
||||
|
||||
Argument : void
|
||||
Return : int
|
||||
|
||||
This function can be used by the platforms to update/use image information
|
||||
for BL2. This function is currently invoked in BL1 after loading BL2,
|
||||
when LOAD\_IMAGE\_V2 is enabled.
|
||||
|
||||
Function : bl1\_plat\_fwu\_done() [optional]
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
|
|
@ -1424,10 +1448,10 @@ The purpose of this function is to return a pointer to a ``meminfo`` structure
|
|||
populated with the extents of secure RAM available for BL2 to use. See
|
||||
``bl2_early_platform_setup()`` above.
|
||||
|
||||
Following function is required only when LOAD\_IMAGE\_V2 is enabled.
|
||||
Following functions are optionally used only when LOAD\_IMAGE\_V2 is enabled.
|
||||
|
||||
Function : bl2\_plat\_handle\_post\_image\_load() [mandatory]
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
Function : bl2\_plat\_handle\_pre\_image\_load() [optional]
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
::
|
||||
|
||||
|
|
@ -1435,9 +1459,20 @@ Function : bl2\_plat\_handle\_post\_image\_load() [mandatory]
|
|||
Return : int
|
||||
|
||||
This function can be used by the platforms to update/use image information
|
||||
for given ``image_id``. This function is currently invoked in BL2 to handle
|
||||
BL image specific information based on the ``image_id`` passed, when
|
||||
LOAD\_IMAGE\_V2 is enabled.
|
||||
for given ``image_id``. This function is currently invoked in BL2 before
|
||||
loading each image, when LOAD\_IMAGE\_V2 is enabled.
|
||||
|
||||
Function : bl2\_plat\_handle\_post\_image\_load() [optional]
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
::
|
||||
|
||||
Argument : unsigned int
|
||||
Return : int
|
||||
|
||||
This function can be used by the platforms to update/use image information
|
||||
for given ``image_id``. This function is currently invoked in BL2 after
|
||||
loading each image, when LOAD\_IMAGE\_V2 is enabled.
|
||||
|
||||
Following functions are required only when LOAD\_IMAGE\_V2 is disabled.
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,24 @@
|
|||
/*
|
||||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#ifndef __IMAGE_DECOMPRESS_H__
|
||||
#define __IMAGE_DECOMPRESS_H__
|
||||
|
||||
#include <stddef.h>
|
||||
#include <stdint.h>
|
||||
|
||||
struct image_info;
|
||||
|
||||
typedef int (decompressor_t)(uintptr_t *in_buf, size_t in_len,
|
||||
uintptr_t *out_buf, size_t out_len,
|
||||
uintptr_t work_buf, size_t work_len);
|
||||
|
||||
void image_decompress_init(uintptr_t buf_base, uint32_t buf_size,
|
||||
decompressor_t *decompressor);
|
||||
void image_decompress_prepare(struct image_info *info);
|
||||
int image_decompress(struct image_info *info);
|
||||
|
||||
#endif /* __IMAGE_DECOMPRESS_H___ */
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
/*
|
||||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#ifndef __TF_GUNZIP_H__
|
||||
#define __TF_GUNZIP_H__
|
||||
|
||||
#include <stddef.h>
|
||||
#include <stdint.h>
|
||||
|
||||
int gunzip(uintptr_t *in_buf, size_t in_len, uintptr_t *out_buf,
|
||||
size_t out_len, uintptr_t work_buf, size_t work_len);
|
||||
|
||||
#endif /* __TF_GUNZIP_H___ */
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
|
||||
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
|
@ -155,6 +155,15 @@ struct image_desc *bl1_plat_get_image_desc(unsigned int image_id);
|
|||
*/
|
||||
__dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved);
|
||||
|
||||
#if LOAD_IMAGE_V2
|
||||
/*
|
||||
* This function can be used by the platforms to update/use image
|
||||
* information for BL2.
|
||||
*/
|
||||
int bl1_plat_handle_pre_image_load(void);
|
||||
int bl1_plat_handle_post_image_load(void);
|
||||
|
||||
#endif /* LOAD_IMAGE_V2 */
|
||||
|
||||
/*******************************************************************************
|
||||
* Mandatory BL2 functions
|
||||
|
|
@ -169,6 +178,7 @@ struct meminfo *bl2_plat_sec_mem_layout(void);
|
|||
* This function can be used by the platforms to update/use image
|
||||
* information for given `image_id`.
|
||||
*/
|
||||
int bl2_plat_handle_pre_image_load(unsigned int image_id);
|
||||
int bl2_plat_handle_post_image_load(unsigned int image_id);
|
||||
|
||||
#else /* LOAD_IMAGE_V2 */
|
||||
|
|
|
|||
|
|
@ -0,0 +1,186 @@
|
|||
/* adler32.c -- compute the Adler-32 checksum of a data stream
|
||||
* Copyright (C) 1995-2011, 2016 Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
/* @(#) $Id$ */
|
||||
|
||||
#include "zutil.h"
|
||||
|
||||
local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
|
||||
|
||||
#define BASE 65521U /* largest prime smaller than 65536 */
|
||||
#define NMAX 5552
|
||||
/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
|
||||
|
||||
#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
|
||||
#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
|
||||
#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
|
||||
#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
|
||||
#define DO16(buf) DO8(buf,0); DO8(buf,8);
|
||||
|
||||
/* use NO_DIVIDE if your processor does not do division in hardware --
|
||||
try it both ways to see which is faster */
|
||||
#ifdef NO_DIVIDE
|
||||
/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
|
||||
(thank you to John Reiser for pointing this out) */
|
||||
# define CHOP(a) \
|
||||
do { \
|
||||
unsigned long tmp = a >> 16; \
|
||||
a &= 0xffffUL; \
|
||||
a += (tmp << 4) - tmp; \
|
||||
} while (0)
|
||||
# define MOD28(a) \
|
||||
do { \
|
||||
CHOP(a); \
|
||||
if (a >= BASE) a -= BASE; \
|
||||
} while (0)
|
||||
# define MOD(a) \
|
||||
do { \
|
||||
CHOP(a); \
|
||||
MOD28(a); \
|
||||
} while (0)
|
||||
# define MOD63(a) \
|
||||
do { /* this assumes a is not negative */ \
|
||||
z_off64_t tmp = a >> 32; \
|
||||
a &= 0xffffffffL; \
|
||||
a += (tmp << 8) - (tmp << 5) + tmp; \
|
||||
tmp = a >> 16; \
|
||||
a &= 0xffffL; \
|
||||
a += (tmp << 4) - tmp; \
|
||||
tmp = a >> 16; \
|
||||
a &= 0xffffL; \
|
||||
a += (tmp << 4) - tmp; \
|
||||
if (a >= BASE) a -= BASE; \
|
||||
} while (0)
|
||||
#else
|
||||
# define MOD(a) a %= BASE
|
||||
# define MOD28(a) a %= BASE
|
||||
# define MOD63(a) a %= BASE
|
||||
#endif
|
||||
|
||||
/* ========================================================================= */
|
||||
uLong ZEXPORT adler32_z(adler, buf, len)
|
||||
uLong adler;
|
||||
const Bytef *buf;
|
||||
z_size_t len;
|
||||
{
|
||||
unsigned long sum2;
|
||||
unsigned n;
|
||||
|
||||
/* split Adler-32 into component sums */
|
||||
sum2 = (adler >> 16) & 0xffff;
|
||||
adler &= 0xffff;
|
||||
|
||||
/* in case user likes doing a byte at a time, keep it fast */
|
||||
if (len == 1) {
|
||||
adler += buf[0];
|
||||
if (adler >= BASE)
|
||||
adler -= BASE;
|
||||
sum2 += adler;
|
||||
if (sum2 >= BASE)
|
||||
sum2 -= BASE;
|
||||
return adler | (sum2 << 16);
|
||||
}
|
||||
|
||||
/* initial Adler-32 value (deferred check for len == 1 speed) */
|
||||
if (buf == Z_NULL)
|
||||
return 1L;
|
||||
|
||||
/* in case short lengths are provided, keep it somewhat fast */
|
||||
if (len < 16) {
|
||||
while (len--) {
|
||||
adler += *buf++;
|
||||
sum2 += adler;
|
||||
}
|
||||
if (adler >= BASE)
|
||||
adler -= BASE;
|
||||
MOD28(sum2); /* only added so many BASE's */
|
||||
return adler | (sum2 << 16);
|
||||
}
|
||||
|
||||
/* do length NMAX blocks -- requires just one modulo operation */
|
||||
while (len >= NMAX) {
|
||||
len -= NMAX;
|
||||
n = NMAX / 16; /* NMAX is divisible by 16 */
|
||||
do {
|
||||
DO16(buf); /* 16 sums unrolled */
|
||||
buf += 16;
|
||||
} while (--n);
|
||||
MOD(adler);
|
||||
MOD(sum2);
|
||||
}
|
||||
|
||||
/* do remaining bytes (less than NMAX, still just one modulo) */
|
||||
if (len) { /* avoid modulos if none remaining */
|
||||
while (len >= 16) {
|
||||
len -= 16;
|
||||
DO16(buf);
|
||||
buf += 16;
|
||||
}
|
||||
while (len--) {
|
||||
adler += *buf++;
|
||||
sum2 += adler;
|
||||
}
|
||||
MOD(adler);
|
||||
MOD(sum2);
|
||||
}
|
||||
|
||||
/* return recombined sums */
|
||||
return adler | (sum2 << 16);
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
uLong ZEXPORT adler32(adler, buf, len)
|
||||
uLong adler;
|
||||
const Bytef *buf;
|
||||
uInt len;
|
||||
{
|
||||
return adler32_z(adler, buf, len);
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
local uLong adler32_combine_(adler1, adler2, len2)
|
||||
uLong adler1;
|
||||
uLong adler2;
|
||||
z_off64_t len2;
|
||||
{
|
||||
unsigned long sum1;
|
||||
unsigned long sum2;
|
||||
unsigned rem;
|
||||
|
||||
/* for negative len, return invalid adler32 as a clue for debugging */
|
||||
if (len2 < 0)
|
||||
return 0xffffffffUL;
|
||||
|
||||
/* the derivation of this formula is left as an exercise for the reader */
|
||||
MOD63(len2); /* assumes len2 >= 0 */
|
||||
rem = (unsigned)len2;
|
||||
sum1 = adler1 & 0xffff;
|
||||
sum2 = rem * sum1;
|
||||
MOD(sum2);
|
||||
sum1 += (adler2 & 0xffff) + BASE - 1;
|
||||
sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
|
||||
if (sum1 >= BASE) sum1 -= BASE;
|
||||
if (sum1 >= BASE) sum1 -= BASE;
|
||||
if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
|
||||
if (sum2 >= BASE) sum2 -= BASE;
|
||||
return sum1 | (sum2 << 16);
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
uLong ZEXPORT adler32_combine(adler1, adler2, len2)
|
||||
uLong adler1;
|
||||
uLong adler2;
|
||||
z_off_t len2;
|
||||
{
|
||||
return adler32_combine_(adler1, adler2, len2);
|
||||
}
|
||||
|
||||
uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
|
||||
uLong adler1;
|
||||
uLong adler2;
|
||||
z_off64_t len2;
|
||||
{
|
||||
return adler32_combine_(adler1, adler2, len2);
|
||||
}
|
||||
|
|
@ -0,0 +1,442 @@
|
|||
/* crc32.c -- compute the CRC-32 of a data stream
|
||||
* Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*
|
||||
* Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
|
||||
* CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
|
||||
* tables for updating the shift register in one step with three exclusive-ors
|
||||
* instead of four steps with four exclusive-ors. This results in about a
|
||||
* factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
|
||||
*/
|
||||
|
||||
/* @(#) $Id$ */
|
||||
|
||||
/*
|
||||
Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
|
||||
protection on the static variables used to control the first-use generation
|
||||
of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
|
||||
first call get_crc_table() to initialize the tables before allowing more than
|
||||
one thread to use crc32().
|
||||
|
||||
DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
|
||||
*/
|
||||
|
||||
#ifdef MAKECRCH
|
||||
# include <stdio.h>
|
||||
# ifndef DYNAMIC_CRC_TABLE
|
||||
# define DYNAMIC_CRC_TABLE
|
||||
# endif /* !DYNAMIC_CRC_TABLE */
|
||||
#endif /* MAKECRCH */
|
||||
|
||||
#include "zutil.h" /* for STDC and FAR definitions */
|
||||
|
||||
/* Definitions for doing the crc four data bytes at a time. */
|
||||
#if !defined(NOBYFOUR) && defined(Z_U4)
|
||||
# define BYFOUR
|
||||
#endif
|
||||
#ifdef BYFOUR
|
||||
local unsigned long crc32_little OF((unsigned long,
|
||||
const unsigned char FAR *, z_size_t));
|
||||
local unsigned long crc32_big OF((unsigned long,
|
||||
const unsigned char FAR *, z_size_t));
|
||||
# define TBLS 8
|
||||
#else
|
||||
# define TBLS 1
|
||||
#endif /* BYFOUR */
|
||||
|
||||
/* Local functions for crc concatenation */
|
||||
local unsigned long gf2_matrix_times OF((unsigned long *mat,
|
||||
unsigned long vec));
|
||||
local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
|
||||
local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
|
||||
|
||||
|
||||
#ifdef DYNAMIC_CRC_TABLE
|
||||
|
||||
local volatile int crc_table_empty = 1;
|
||||
local z_crc_t FAR crc_table[TBLS][256];
|
||||
local void make_crc_table OF((void));
|
||||
#ifdef MAKECRCH
|
||||
local void write_table OF((FILE *, const z_crc_t FAR *));
|
||||
#endif /* MAKECRCH */
|
||||
/*
|
||||
Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
|
||||
x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
|
||||
|
||||
Polynomials over GF(2) are represented in binary, one bit per coefficient,
|
||||
with the lowest powers in the most significant bit. Then adding polynomials
|
||||
is just exclusive-or, and multiplying a polynomial by x is a right shift by
|
||||
one. If we call the above polynomial p, and represent a byte as the
|
||||
polynomial q, also with the lowest power in the most significant bit (so the
|
||||
byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
|
||||
where a mod b means the remainder after dividing a by b.
|
||||
|
||||
This calculation is done using the shift-register method of multiplying and
|
||||
taking the remainder. The register is initialized to zero, and for each
|
||||
incoming bit, x^32 is added mod p to the register if the bit is a one (where
|
||||
x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
|
||||
x (which is shifting right by one and adding x^32 mod p if the bit shifted
|
||||
out is a one). We start with the highest power (least significant bit) of
|
||||
q and repeat for all eight bits of q.
|
||||
|
||||
The first table is simply the CRC of all possible eight bit values. This is
|
||||
all the information needed to generate CRCs on data a byte at a time for all
|
||||
combinations of CRC register values and incoming bytes. The remaining tables
|
||||
allow for word-at-a-time CRC calculation for both big-endian and little-
|
||||
endian machines, where a word is four bytes.
|
||||
*/
|
||||
local void make_crc_table()
|
||||
{
|
||||
z_crc_t c;
|
||||
int n, k;
|
||||
z_crc_t poly; /* polynomial exclusive-or pattern */
|
||||
/* terms of polynomial defining this crc (except x^32): */
|
||||
static volatile int first = 1; /* flag to limit concurrent making */
|
||||
static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
|
||||
|
||||
/* See if another task is already doing this (not thread-safe, but better
|
||||
than nothing -- significantly reduces duration of vulnerability in
|
||||
case the advice about DYNAMIC_CRC_TABLE is ignored) */
|
||||
if (first) {
|
||||
first = 0;
|
||||
|
||||
/* make exclusive-or pattern from polynomial (0xedb88320UL) */
|
||||
poly = 0;
|
||||
for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
|
||||
poly |= (z_crc_t)1 << (31 - p[n]);
|
||||
|
||||
/* generate a crc for every 8-bit value */
|
||||
for (n = 0; n < 256; n++) {
|
||||
c = (z_crc_t)n;
|
||||
for (k = 0; k < 8; k++)
|
||||
c = c & 1 ? poly ^ (c >> 1) : c >> 1;
|
||||
crc_table[0][n] = c;
|
||||
}
|
||||
|
||||
#ifdef BYFOUR
|
||||
/* generate crc for each value followed by one, two, and three zeros,
|
||||
and then the byte reversal of those as well as the first table */
|
||||
for (n = 0; n < 256; n++) {
|
||||
c = crc_table[0][n];
|
||||
crc_table[4][n] = ZSWAP32(c);
|
||||
for (k = 1; k < 4; k++) {
|
||||
c = crc_table[0][c & 0xff] ^ (c >> 8);
|
||||
crc_table[k][n] = c;
|
||||
crc_table[k + 4][n] = ZSWAP32(c);
|
||||
}
|
||||
}
|
||||
#endif /* BYFOUR */
|
||||
|
||||
crc_table_empty = 0;
|
||||
}
|
||||
else { /* not first */
|
||||
/* wait for the other guy to finish (not efficient, but rare) */
|
||||
while (crc_table_empty)
|
||||
;
|
||||
}
|
||||
|
||||
#ifdef MAKECRCH
|
||||
/* write out CRC tables to crc32.h */
|
||||
{
|
||||
FILE *out;
|
||||
|
||||
out = fopen("crc32.h", "w");
|
||||
if (out == NULL) return;
|
||||
fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
|
||||
fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
|
||||
fprintf(out, "local const z_crc_t FAR ");
|
||||
fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
|
||||
write_table(out, crc_table[0]);
|
||||
# ifdef BYFOUR
|
||||
fprintf(out, "#ifdef BYFOUR\n");
|
||||
for (k = 1; k < 8; k++) {
|
||||
fprintf(out, " },\n {\n");
|
||||
write_table(out, crc_table[k]);
|
||||
}
|
||||
fprintf(out, "#endif\n");
|
||||
# endif /* BYFOUR */
|
||||
fprintf(out, " }\n};\n");
|
||||
fclose(out);
|
||||
}
|
||||
#endif /* MAKECRCH */
|
||||
}
|
||||
|
||||
#ifdef MAKECRCH
|
||||
local void write_table(out, table)
|
||||
FILE *out;
|
||||
const z_crc_t FAR *table;
|
||||
{
|
||||
int n;
|
||||
|
||||
for (n = 0; n < 256; n++)
|
||||
fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ",
|
||||
(unsigned long)(table[n]),
|
||||
n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
|
||||
}
|
||||
#endif /* MAKECRCH */
|
||||
|
||||
#else /* !DYNAMIC_CRC_TABLE */
|
||||
/* ========================================================================
|
||||
* Tables of CRC-32s of all single-byte values, made by make_crc_table().
|
||||
*/
|
||||
#include "crc32.h"
|
||||
#endif /* DYNAMIC_CRC_TABLE */
|
||||
|
||||
/* =========================================================================
|
||||
* This function can be used by asm versions of crc32()
|
||||
*/
|
||||
const z_crc_t FAR * ZEXPORT get_crc_table()
|
||||
{
|
||||
#ifdef DYNAMIC_CRC_TABLE
|
||||
if (crc_table_empty)
|
||||
make_crc_table();
|
||||
#endif /* DYNAMIC_CRC_TABLE */
|
||||
return (const z_crc_t FAR *)crc_table;
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
|
||||
#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
|
||||
|
||||
/* ========================================================================= */
|
||||
unsigned long ZEXPORT crc32_z(crc, buf, len)
|
||||
unsigned long crc;
|
||||
const unsigned char FAR *buf;
|
||||
z_size_t len;
|
||||
{
|
||||
if (buf == Z_NULL) return 0UL;
|
||||
|
||||
#ifdef DYNAMIC_CRC_TABLE
|
||||
if (crc_table_empty)
|
||||
make_crc_table();
|
||||
#endif /* DYNAMIC_CRC_TABLE */
|
||||
|
||||
#ifdef BYFOUR
|
||||
if (sizeof(void *) == sizeof(ptrdiff_t)) {
|
||||
z_crc_t endian;
|
||||
|
||||
endian = 1;
|
||||
if (*((unsigned char *)(&endian)))
|
||||
return crc32_little(crc, buf, len);
|
||||
else
|
||||
return crc32_big(crc, buf, len);
|
||||
}
|
||||
#endif /* BYFOUR */
|
||||
crc = crc ^ 0xffffffffUL;
|
||||
while (len >= 8) {
|
||||
DO8;
|
||||
len -= 8;
|
||||
}
|
||||
if (len) do {
|
||||
DO1;
|
||||
} while (--len);
|
||||
return crc ^ 0xffffffffUL;
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
unsigned long ZEXPORT crc32(crc, buf, len)
|
||||
unsigned long crc;
|
||||
const unsigned char FAR *buf;
|
||||
uInt len;
|
||||
{
|
||||
return crc32_z(crc, buf, len);
|
||||
}
|
||||
|
||||
#ifdef BYFOUR
|
||||
|
||||
/*
|
||||
This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit
|
||||
integer pointer type. This violates the strict aliasing rule, where a
|
||||
compiler can assume, for optimization purposes, that two pointers to
|
||||
fundamentally different types won't ever point to the same memory. This can
|
||||
manifest as a problem only if one of the pointers is written to. This code
|
||||
only reads from those pointers. So long as this code remains isolated in
|
||||
this compilation unit, there won't be a problem. For this reason, this code
|
||||
should not be copied and pasted into a compilation unit in which other code
|
||||
writes to the buffer that is passed to these routines.
|
||||
*/
|
||||
|
||||
/* ========================================================================= */
|
||||
#define DOLIT4 c ^= *buf4++; \
|
||||
c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
|
||||
crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
|
||||
#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
|
||||
|
||||
/* ========================================================================= */
|
||||
local unsigned long crc32_little(crc, buf, len)
|
||||
unsigned long crc;
|
||||
const unsigned char FAR *buf;
|
||||
z_size_t len;
|
||||
{
|
||||
register z_crc_t c;
|
||||
register const z_crc_t FAR *buf4;
|
||||
|
||||
c = (z_crc_t)crc;
|
||||
c = ~c;
|
||||
while (len && ((ptrdiff_t)buf & 3)) {
|
||||
c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
|
||||
len--;
|
||||
}
|
||||
|
||||
buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
|
||||
while (len >= 32) {
|
||||
DOLIT32;
|
||||
len -= 32;
|
||||
}
|
||||
while (len >= 4) {
|
||||
DOLIT4;
|
||||
len -= 4;
|
||||
}
|
||||
buf = (const unsigned char FAR *)buf4;
|
||||
|
||||
if (len) do {
|
||||
c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
|
||||
} while (--len);
|
||||
c = ~c;
|
||||
return (unsigned long)c;
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
#define DOBIG4 c ^= *buf4++; \
|
||||
c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
|
||||
crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
|
||||
#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
|
||||
|
||||
/* ========================================================================= */
|
||||
local unsigned long crc32_big(crc, buf, len)
|
||||
unsigned long crc;
|
||||
const unsigned char FAR *buf;
|
||||
z_size_t len;
|
||||
{
|
||||
register z_crc_t c;
|
||||
register const z_crc_t FAR *buf4;
|
||||
|
||||
c = ZSWAP32((z_crc_t)crc);
|
||||
c = ~c;
|
||||
while (len && ((ptrdiff_t)buf & 3)) {
|
||||
c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
|
||||
len--;
|
||||
}
|
||||
|
||||
buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
|
||||
while (len >= 32) {
|
||||
DOBIG32;
|
||||
len -= 32;
|
||||
}
|
||||
while (len >= 4) {
|
||||
DOBIG4;
|
||||
len -= 4;
|
||||
}
|
||||
buf = (const unsigned char FAR *)buf4;
|
||||
|
||||
if (len) do {
|
||||
c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
|
||||
} while (--len);
|
||||
c = ~c;
|
||||
return (unsigned long)(ZSWAP32(c));
|
||||
}
|
||||
|
||||
#endif /* BYFOUR */
|
||||
|
||||
#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */
|
||||
|
||||
/* ========================================================================= */
|
||||
local unsigned long gf2_matrix_times(mat, vec)
|
||||
unsigned long *mat;
|
||||
unsigned long vec;
|
||||
{
|
||||
unsigned long sum;
|
||||
|
||||
sum = 0;
|
||||
while (vec) {
|
||||
if (vec & 1)
|
||||
sum ^= *mat;
|
||||
vec >>= 1;
|
||||
mat++;
|
||||
}
|
||||
return sum;
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
local void gf2_matrix_square(square, mat)
|
||||
unsigned long *square;
|
||||
unsigned long *mat;
|
||||
{
|
||||
int n;
|
||||
|
||||
for (n = 0; n < GF2_DIM; n++)
|
||||
square[n] = gf2_matrix_times(mat, mat[n]);
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
local uLong crc32_combine_(crc1, crc2, len2)
|
||||
uLong crc1;
|
||||
uLong crc2;
|
||||
z_off64_t len2;
|
||||
{
|
||||
int n;
|
||||
unsigned long row;
|
||||
unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */
|
||||
unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */
|
||||
|
||||
/* degenerate case (also disallow negative lengths) */
|
||||
if (len2 <= 0)
|
||||
return crc1;
|
||||
|
||||
/* put operator for one zero bit in odd */
|
||||
odd[0] = 0xedb88320UL; /* CRC-32 polynomial */
|
||||
row = 1;
|
||||
for (n = 1; n < GF2_DIM; n++) {
|
||||
odd[n] = row;
|
||||
row <<= 1;
|
||||
}
|
||||
|
||||
/* put operator for two zero bits in even */
|
||||
gf2_matrix_square(even, odd);
|
||||
|
||||
/* put operator for four zero bits in odd */
|
||||
gf2_matrix_square(odd, even);
|
||||
|
||||
/* apply len2 zeros to crc1 (first square will put the operator for one
|
||||
zero byte, eight zero bits, in even) */
|
||||
do {
|
||||
/* apply zeros operator for this bit of len2 */
|
||||
gf2_matrix_square(even, odd);
|
||||
if (len2 & 1)
|
||||
crc1 = gf2_matrix_times(even, crc1);
|
||||
len2 >>= 1;
|
||||
|
||||
/* if no more bits set, then done */
|
||||
if (len2 == 0)
|
||||
break;
|
||||
|
||||
/* another iteration of the loop with odd and even swapped */
|
||||
gf2_matrix_square(odd, even);
|
||||
if (len2 & 1)
|
||||
crc1 = gf2_matrix_times(odd, crc1);
|
||||
len2 >>= 1;
|
||||
|
||||
/* if no more bits set, then done */
|
||||
} while (len2 != 0);
|
||||
|
||||
/* return combined crc */
|
||||
crc1 ^= crc2;
|
||||
return crc1;
|
||||
}
|
||||
|
||||
/* ========================================================================= */
|
||||
uLong ZEXPORT crc32_combine(crc1, crc2, len2)
|
||||
uLong crc1;
|
||||
uLong crc2;
|
||||
z_off_t len2;
|
||||
{
|
||||
return crc32_combine_(crc1, crc2, len2);
|
||||
}
|
||||
|
||||
uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
|
||||
uLong crc1;
|
||||
uLong crc2;
|
||||
z_off64_t len2;
|
||||
{
|
||||
return crc32_combine_(crc1, crc2, len2);
|
||||
}
|
||||
|
|
@ -0,0 +1,441 @@
|
|||
/* crc32.h -- tables for rapid CRC calculation
|
||||
* Generated automatically by crc32.c
|
||||
*/
|
||||
|
||||
local const z_crc_t FAR crc_table[TBLS][256] =
|
||||
{
|
||||
{
|
||||
0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
|
||||
0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
|
||||
0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
|
||||
0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
|
||||
0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
|
||||
0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
|
||||
0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
|
||||
0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
|
||||
0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
|
||||
0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
|
||||
0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
|
||||
0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
|
||||
0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
|
||||
0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
|
||||
0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
|
||||
0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
|
||||
0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
|
||||
0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
|
||||
0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
|
||||
0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
|
||||
0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
|
||||
0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
|
||||
0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
|
||||
0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
|
||||
0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
|
||||
0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
|
||||
0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
|
||||
0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
|
||||
0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
|
||||
0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
|
||||
0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
|
||||
0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
|
||||
0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
|
||||
0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
|
||||
0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
|
||||
0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
|
||||
0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
|
||||
0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
|
||||
0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
|
||||
0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
|
||||
0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
|
||||
0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
|
||||
0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
|
||||
0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
|
||||
0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
|
||||
0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
|
||||
0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
|
||||
0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
|
||||
0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
|
||||
0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
|
||||
0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
|
||||
0x2d02ef8dUL
|
||||
#ifdef BYFOUR
|
||||
},
|
||||
{
|
||||
0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
|
||||
0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
|
||||
0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
|
||||
0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
|
||||
0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
|
||||
0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
|
||||
0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
|
||||
0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
|
||||
0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
|
||||
0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
|
||||
0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
|
||||
0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
|
||||
0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
|
||||
0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
|
||||
0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
|
||||
0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
|
||||
0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
|
||||
0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
|
||||
0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
|
||||
0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
|
||||
0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
|
||||
0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
|
||||
0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
|
||||
0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
|
||||
0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
|
||||
0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
|
||||
0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
|
||||
0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
|
||||
0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
|
||||
0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
|
||||
0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
|
||||
0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
|
||||
0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
|
||||
0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
|
||||
0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
|
||||
0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
|
||||
0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
|
||||
0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
|
||||
0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
|
||||
0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
|
||||
0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
|
||||
0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
|
||||
0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
|
||||
0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
|
||||
0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
|
||||
0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
|
||||
0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
|
||||
0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
|
||||
0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
|
||||
0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
|
||||
0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
|
||||
0x9324fd72UL
|
||||
},
|
||||
{
|
||||
0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
|
||||
0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
|
||||
0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
|
||||
0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
|
||||
0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
|
||||
0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
|
||||
0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
|
||||
0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
|
||||
0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
|
||||
0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
|
||||
0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
|
||||
0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
|
||||
0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
|
||||
0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
|
||||
0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
|
||||
0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
|
||||
0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
|
||||
0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
|
||||
0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
|
||||
0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
|
||||
0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
|
||||
0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
|
||||
0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
|
||||
0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
|
||||
0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
|
||||
0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
|
||||
0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
|
||||
0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
|
||||
0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
|
||||
0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
|
||||
0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
|
||||
0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
|
||||
0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
|
||||
0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
|
||||
0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
|
||||
0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
|
||||
0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
|
||||
0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
|
||||
0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
|
||||
0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
|
||||
0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
|
||||
0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
|
||||
0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
|
||||
0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
|
||||
0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
|
||||
0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
|
||||
0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
|
||||
0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
|
||||
0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
|
||||
0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
|
||||
0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
|
||||
0xbe9834edUL
|
||||
},
|
||||
{
|
||||
0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
|
||||
0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
|
||||
0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
|
||||
0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
|
||||
0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
|
||||
0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
|
||||
0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
|
||||
0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
|
||||
0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
|
||||
0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
|
||||
0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
|
||||
0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
|
||||
0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
|
||||
0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
|
||||
0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
|
||||
0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
|
||||
0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
|
||||
0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
|
||||
0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
|
||||
0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
|
||||
0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
|
||||
0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
|
||||
0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
|
||||
0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
|
||||
0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
|
||||
0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
|
||||
0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
|
||||
0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
|
||||
0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
|
||||
0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
|
||||
0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
|
||||
0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
|
||||
0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
|
||||
0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
|
||||
0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
|
||||
0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
|
||||
0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
|
||||
0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
|
||||
0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
|
||||
0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
|
||||
0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
|
||||
0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
|
||||
0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
|
||||
0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
|
||||
0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
|
||||
0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
|
||||
0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
|
||||
0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
|
||||
0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
|
||||
0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
|
||||
0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
|
||||
0xde0506f1UL
|
||||
},
|
||||
{
|
||||
0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
|
||||
0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
|
||||
0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
|
||||
0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
|
||||
0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
|
||||
0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
|
||||
0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
|
||||
0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
|
||||
0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
|
||||
0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
|
||||
0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
|
||||
0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
|
||||
0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
|
||||
0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
|
||||
0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
|
||||
0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
|
||||
0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
|
||||
0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
|
||||
0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
|
||||
0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
|
||||
0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
|
||||
0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
|
||||
0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
|
||||
0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
|
||||
0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
|
||||
0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
|
||||
0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
|
||||
0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
|
||||
0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
|
||||
0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
|
||||
0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
|
||||
0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
|
||||
0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
|
||||
0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
|
||||
0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
|
||||
0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
|
||||
0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
|
||||
0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
|
||||
0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
|
||||
0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
|
||||
0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
|
||||
0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
|
||||
0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
|
||||
0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
|
||||
0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
|
||||
0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
|
||||
0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
|
||||
0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
|
||||
0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
|
||||
0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
|
||||
0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
|
||||
0x8def022dUL
|
||||
},
|
||||
{
|
||||
0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
|
||||
0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
|
||||
0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
|
||||
0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
|
||||
0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
|
||||
0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
|
||||
0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
|
||||
0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
|
||||
0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
|
||||
0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
|
||||
0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
|
||||
0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
|
||||
0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
|
||||
0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
|
||||
0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
|
||||
0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
|
||||
0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
|
||||
0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
|
||||
0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
|
||||
0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
|
||||
0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
|
||||
0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
|
||||
0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
|
||||
0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
|
||||
0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
|
||||
0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
|
||||
0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
|
||||
0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
|
||||
0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
|
||||
0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
|
||||
0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
|
||||
0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
|
||||
0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
|
||||
0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
|
||||
0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
|
||||
0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
|
||||
0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
|
||||
0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
|
||||
0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
|
||||
0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
|
||||
0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
|
||||
0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
|
||||
0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
|
||||
0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
|
||||
0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
|
||||
0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
|
||||
0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
|
||||
0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
|
||||
0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
|
||||
0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
|
||||
0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
|
||||
0x72fd2493UL
|
||||
},
|
||||
{
|
||||
0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
|
||||
0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
|
||||
0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
|
||||
0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
|
||||
0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
|
||||
0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
|
||||
0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
|
||||
0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
|
||||
0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
|
||||
0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
|
||||
0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
|
||||
0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
|
||||
0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
|
||||
0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
|
||||
0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
|
||||
0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
|
||||
0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
|
||||
0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
|
||||
0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
|
||||
0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
|
||||
0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
|
||||
0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
|
||||
0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
|
||||
0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
|
||||
0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
|
||||
0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
|
||||
0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
|
||||
0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
|
||||
0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
|
||||
0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
|
||||
0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
|
||||
0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
|
||||
0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
|
||||
0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
|
||||
0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
|
||||
0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
|
||||
0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
|
||||
0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
|
||||
0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
|
||||
0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
|
||||
0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
|
||||
0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
|
||||
0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
|
||||
0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
|
||||
0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
|
||||
0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
|
||||
0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
|
||||
0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
|
||||
0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
|
||||
0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
|
||||
0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
|
||||
0xed3498beUL
|
||||
},
|
||||
{
|
||||
0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
|
||||
0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
|
||||
0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
|
||||
0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
|
||||
0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
|
||||
0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
|
||||
0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
|
||||
0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
|
||||
0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
|
||||
0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
|
||||
0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
|
||||
0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
|
||||
0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
|
||||
0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
|
||||
0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
|
||||
0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
|
||||
0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
|
||||
0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
|
||||
0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
|
||||
0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
|
||||
0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
|
||||
0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
|
||||
0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
|
||||
0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
|
||||
0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
|
||||
0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
|
||||
0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
|
||||
0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
|
||||
0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
|
||||
0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
|
||||
0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
|
||||
0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
|
||||
0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
|
||||
0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
|
||||
0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
|
||||
0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
|
||||
0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
|
||||
0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
|
||||
0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
|
||||
0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
|
||||
0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
|
||||
0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
|
||||
0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
|
||||
0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
|
||||
0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
|
||||
0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
|
||||
0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
|
||||
0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
|
||||
0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
|
||||
0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
|
||||
0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
|
||||
0xf10605deUL
|
||||
#endif
|
||||
}
|
||||
};
|
||||
|
|
@ -0,0 +1,323 @@
|
|||
/* inffast.c -- fast decoding
|
||||
* Copyright (C) 1995-2017 Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
#include "zutil.h"
|
||||
#include "inftrees.h"
|
||||
#include "inflate.h"
|
||||
#include "inffast.h"
|
||||
|
||||
#ifdef ASMINF
|
||||
# pragma message("Assembler code may have bugs -- use at your own risk")
|
||||
#else
|
||||
|
||||
/*
|
||||
Decode literal, length, and distance codes and write out the resulting
|
||||
literal and match bytes until either not enough input or output is
|
||||
available, an end-of-block is encountered, or a data error is encountered.
|
||||
When large enough input and output buffers are supplied to inflate(), for
|
||||
example, a 16K input buffer and a 64K output buffer, more than 95% of the
|
||||
inflate execution time is spent in this routine.
|
||||
|
||||
Entry assumptions:
|
||||
|
||||
state->mode == LEN
|
||||
strm->avail_in >= 6
|
||||
strm->avail_out >= 258
|
||||
start >= strm->avail_out
|
||||
state->bits < 8
|
||||
|
||||
On return, state->mode is one of:
|
||||
|
||||
LEN -- ran out of enough output space or enough available input
|
||||
TYPE -- reached end of block code, inflate() to interpret next block
|
||||
BAD -- error in block data
|
||||
|
||||
Notes:
|
||||
|
||||
- The maximum input bits used by a length/distance pair is 15 bits for the
|
||||
length code, 5 bits for the length extra, 15 bits for the distance code,
|
||||
and 13 bits for the distance extra. This totals 48 bits, or six bytes.
|
||||
Therefore if strm->avail_in >= 6, then there is enough input to avoid
|
||||
checking for available input while decoding.
|
||||
|
||||
- The maximum bytes that a single length/distance pair can output is 258
|
||||
bytes, which is the maximum length that can be coded. inflate_fast()
|
||||
requires strm->avail_out >= 258 for each loop to avoid checking for
|
||||
output space.
|
||||
*/
|
||||
void ZLIB_INTERNAL inflate_fast(strm, start)
|
||||
z_streamp strm;
|
||||
unsigned start; /* inflate()'s starting value for strm->avail_out */
|
||||
{
|
||||
struct inflate_state FAR *state;
|
||||
z_const unsigned char FAR *in; /* local strm->next_in */
|
||||
z_const unsigned char FAR *last; /* have enough input while in < last */
|
||||
unsigned char FAR *out; /* local strm->next_out */
|
||||
unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
|
||||
unsigned char FAR *end; /* while out < end, enough space available */
|
||||
#ifdef INFLATE_STRICT
|
||||
unsigned dmax; /* maximum distance from zlib header */
|
||||
#endif
|
||||
unsigned wsize; /* window size or zero if not using window */
|
||||
unsigned whave; /* valid bytes in the window */
|
||||
unsigned wnext; /* window write index */
|
||||
unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
|
||||
unsigned long hold; /* local strm->hold */
|
||||
unsigned bits; /* local strm->bits */
|
||||
code const FAR *lcode; /* local strm->lencode */
|
||||
code const FAR *dcode; /* local strm->distcode */
|
||||
unsigned lmask; /* mask for first level of length codes */
|
||||
unsigned dmask; /* mask for first level of distance codes */
|
||||
code here; /* retrieved table entry */
|
||||
unsigned op; /* code bits, operation, extra bits, or */
|
||||
/* window position, window bytes to copy */
|
||||
unsigned len; /* match length, unused bytes */
|
||||
unsigned dist; /* match distance */
|
||||
unsigned char FAR *from; /* where to copy match from */
|
||||
|
||||
/* copy state to local variables */
|
||||
state = (struct inflate_state FAR *)strm->state;
|
||||
in = strm->next_in;
|
||||
last = in + (strm->avail_in - 5);
|
||||
out = strm->next_out;
|
||||
beg = out - (start - strm->avail_out);
|
||||
end = out + (strm->avail_out - 257);
|
||||
#ifdef INFLATE_STRICT
|
||||
dmax = state->dmax;
|
||||
#endif
|
||||
wsize = state->wsize;
|
||||
whave = state->whave;
|
||||
wnext = state->wnext;
|
||||
window = state->window;
|
||||
hold = state->hold;
|
||||
bits = state->bits;
|
||||
lcode = state->lencode;
|
||||
dcode = state->distcode;
|
||||
lmask = (1U << state->lenbits) - 1;
|
||||
dmask = (1U << state->distbits) - 1;
|
||||
|
||||
/* decode literals and length/distances until end-of-block or not enough
|
||||
input data or output space */
|
||||
do {
|
||||
if (bits < 15) {
|
||||
hold += (unsigned long)(*in++) << bits;
|
||||
bits += 8;
|
||||
hold += (unsigned long)(*in++) << bits;
|
||||
bits += 8;
|
||||
}
|
||||
here = lcode[hold & lmask];
|
||||
dolen:
|
||||
op = (unsigned)(here.bits);
|
||||
hold >>= op;
|
||||
bits -= op;
|
||||
op = (unsigned)(here.op);
|
||||
if (op == 0) { /* literal */
|
||||
Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
|
||||
"inflate: literal '%c'\n" :
|
||||
"inflate: literal 0x%02x\n", here.val));
|
||||
*out++ = (unsigned char)(here.val);
|
||||
}
|
||||
else if (op & 16) { /* length base */
|
||||
len = (unsigned)(here.val);
|
||||
op &= 15; /* number of extra bits */
|
||||
if (op) {
|
||||
if (bits < op) {
|
||||
hold += (unsigned long)(*in++) << bits;
|
||||
bits += 8;
|
||||
}
|
||||
len += (unsigned)hold & ((1U << op) - 1);
|
||||
hold >>= op;
|
||||
bits -= op;
|
||||
}
|
||||
Tracevv((stderr, "inflate: length %u\n", len));
|
||||
if (bits < 15) {
|
||||
hold += (unsigned long)(*in++) << bits;
|
||||
bits += 8;
|
||||
hold += (unsigned long)(*in++) << bits;
|
||||
bits += 8;
|
||||
}
|
||||
here = dcode[hold & dmask];
|
||||
dodist:
|
||||
op = (unsigned)(here.bits);
|
||||
hold >>= op;
|
||||
bits -= op;
|
||||
op = (unsigned)(here.op);
|
||||
if (op & 16) { /* distance base */
|
||||
dist = (unsigned)(here.val);
|
||||
op &= 15; /* number of extra bits */
|
||||
if (bits < op) {
|
||||
hold += (unsigned long)(*in++) << bits;
|
||||
bits += 8;
|
||||
if (bits < op) {
|
||||
hold += (unsigned long)(*in++) << bits;
|
||||
bits += 8;
|
||||
}
|
||||
}
|
||||
dist += (unsigned)hold & ((1U << op) - 1);
|
||||
#ifdef INFLATE_STRICT
|
||||
if (dist > dmax) {
|
||||
strm->msg = (char *)"invalid distance too far back";
|
||||
state->mode = BAD;
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
hold >>= op;
|
||||
bits -= op;
|
||||
Tracevv((stderr, "inflate: distance %u\n", dist));
|
||||
op = (unsigned)(out - beg); /* max distance in output */
|
||||
if (dist > op) { /* see if copy from window */
|
||||
op = dist - op; /* distance back in window */
|
||||
if (op > whave) {
|
||||
if (state->sane) {
|
||||
strm->msg =
|
||||
(char *)"invalid distance too far back";
|
||||
state->mode = BAD;
|
||||
break;
|
||||
}
|
||||
#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
|
||||
if (len <= op - whave) {
|
||||
do {
|
||||
*out++ = 0;
|
||||
} while (--len);
|
||||
continue;
|
||||
}
|
||||
len -= op - whave;
|
||||
do {
|
||||
*out++ = 0;
|
||||
} while (--op > whave);
|
||||
if (op == 0) {
|
||||
from = out - dist;
|
||||
do {
|
||||
*out++ = *from++;
|
||||
} while (--len);
|
||||
continue;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
from = window;
|
||||
if (wnext == 0) { /* very common case */
|
||||
from += wsize - op;
|
||||
if (op < len) { /* some from window */
|
||||
len -= op;
|
||||
do {
|
||||
*out++ = *from++;
|
||||
} while (--op);
|
||||
from = out - dist; /* rest from output */
|
||||
}
|
||||
}
|
||||
else if (wnext < op) { /* wrap around window */
|
||||
from += wsize + wnext - op;
|
||||
op -= wnext;
|
||||
if (op < len) { /* some from end of window */
|
||||
len -= op;
|
||||
do {
|
||||
*out++ = *from++;
|
||||
} while (--op);
|
||||
from = window;
|
||||
if (wnext < len) { /* some from start of window */
|
||||
op = wnext;
|
||||
len -= op;
|
||||
do {
|
||||
*out++ = *from++;
|
||||
} while (--op);
|
||||
from = out - dist; /* rest from output */
|
||||
}
|
||||
}
|
||||
}
|
||||
else { /* contiguous in window */
|
||||
from += wnext - op;
|
||||
if (op < len) { /* some from window */
|
||||
len -= op;
|
||||
do {
|
||||
*out++ = *from++;
|
||||
} while (--op);
|
||||
from = out - dist; /* rest from output */
|
||||
}
|
||||
}
|
||||
while (len > 2) {
|
||||
*out++ = *from++;
|
||||
*out++ = *from++;
|
||||
*out++ = *from++;
|
||||
len -= 3;
|
||||
}
|
||||
if (len) {
|
||||
*out++ = *from++;
|
||||
if (len > 1)
|
||||
*out++ = *from++;
|
||||
}
|
||||
}
|
||||
else {
|
||||
from = out - dist; /* copy direct from output */
|
||||
do { /* minimum length is three */
|
||||
*out++ = *from++;
|
||||
*out++ = *from++;
|
||||
*out++ = *from++;
|
||||
len -= 3;
|
||||
} while (len > 2);
|
||||
if (len) {
|
||||
*out++ = *from++;
|
||||
if (len > 1)
|
||||
*out++ = *from++;
|
||||
}
|
||||
}
|
||||
}
|
||||
else if ((op & 64) == 0) { /* 2nd level distance code */
|
||||
here = dcode[here.val + (hold & ((1U << op) - 1))];
|
||||
goto dodist;
|
||||
}
|
||||
else {
|
||||
strm->msg = (char *)"invalid distance code";
|
||||
state->mode = BAD;
|
||||
break;
|
||||
}
|
||||
}
|
||||
else if ((op & 64) == 0) { /* 2nd level length code */
|
||||
here = lcode[here.val + (hold & ((1U << op) - 1))];
|
||||
goto dolen;
|
||||
}
|
||||
else if (op & 32) { /* end-of-block */
|
||||
Tracevv((stderr, "inflate: end of block\n"));
|
||||
state->mode = TYPE;
|
||||
break;
|
||||
}
|
||||
else {
|
||||
strm->msg = (char *)"invalid literal/length code";
|
||||
state->mode = BAD;
|
||||
break;
|
||||
}
|
||||
} while (in < last && out < end);
|
||||
|
||||
/* return unused bytes (on entry, bits < 8, so in won't go too far back) */
|
||||
len = bits >> 3;
|
||||
in -= len;
|
||||
bits -= len << 3;
|
||||
hold &= (1U << bits) - 1;
|
||||
|
||||
/* update state and return */
|
||||
strm->next_in = in;
|
||||
strm->next_out = out;
|
||||
strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
|
||||
strm->avail_out = (unsigned)(out < end ?
|
||||
257 + (end - out) : 257 - (out - end));
|
||||
state->hold = hold;
|
||||
state->bits = bits;
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
|
||||
- Using bit fields for code structure
|
||||
- Different op definition to avoid & for extra bits (do & for table bits)
|
||||
- Three separate decoding do-loops for direct, window, and wnext == 0
|
||||
- Special case for distance > 1 copies to do overlapped load and store copy
|
||||
- Explicit branch predictions (based on measured branch probabilities)
|
||||
- Deferring match copy and interspersed it with decoding subsequent codes
|
||||
- Swapping literal/length else
|
||||
- Swapping window/direct else
|
||||
- Larger unrolled copy loops (three is about right)
|
||||
- Moving len -= 3 statement into middle of loop
|
||||
*/
|
||||
|
||||
#endif /* !ASMINF */
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
/* inffast.h -- header to use inffast.c
|
||||
* Copyright (C) 1995-2003, 2010 Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
/* WARNING: this file should *not* be used by applications. It is
|
||||
part of the implementation of the compression library and is
|
||||
subject to change. Applications should only use zlib.h.
|
||||
*/
|
||||
|
||||
void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
|
||||
|
|
@ -0,0 +1,94 @@
|
|||
/* inffixed.h -- table for decoding fixed codes
|
||||
* Generated automatically by makefixed().
|
||||
*/
|
||||
|
||||
/* WARNING: this file should *not* be used by applications.
|
||||
It is part of the implementation of this library and is
|
||||
subject to change. Applications should only use zlib.h.
|
||||
*/
|
||||
|
||||
static const code lenfix[512] = {
|
||||
{96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
|
||||
{0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
|
||||
{0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
|
||||
{0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
|
||||
{0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
|
||||
{21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
|
||||
{0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
|
||||
{0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
|
||||
{18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
|
||||
{0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
|
||||
{0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
|
||||
{0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
|
||||
{20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
|
||||
{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
|
||||
{0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
|
||||
{0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
|
||||
{16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
|
||||
{0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
|
||||
{0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
|
||||
{0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
|
||||
{0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
|
||||
{0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
|
||||
{0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
|
||||
{0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
|
||||
{17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
|
||||
{0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
|
||||
{0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
|
||||
{0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
|
||||
{19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
|
||||
{0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
|
||||
{0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
|
||||
{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
|
||||
{16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
|
||||
{0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
|
||||
{0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
|
||||
{0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
|
||||
{0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
|
||||
{20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
|
||||
{0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
|
||||
{0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
|
||||
{17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
|
||||
{0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
|
||||
{0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
|
||||
{0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
|
||||
{20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
|
||||
{0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
|
||||
{0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
|
||||
{0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
|
||||
{16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
|
||||
{0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
|
||||
{0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
|
||||
{0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
|
||||
{0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
|
||||
{0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
|
||||
{0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
|
||||
{0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
|
||||
{16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
|
||||
{0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
|
||||
{0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
|
||||
{0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
|
||||
{19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
|
||||
{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
|
||||
{0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
|
||||
{0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
|
||||
{16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
|
||||
{0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
|
||||
{0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
|
||||
{0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
|
||||
{0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
|
||||
{64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
|
||||
{0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
|
||||
{0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
|
||||
{18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
|
||||
{0,9,255}
|
||||
};
|
||||
|
||||
static const code distfix[32] = {
|
||||
{16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
|
||||
{21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
|
||||
{18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
|
||||
{19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
|
||||
{16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
|
||||
{22,5,193},{64,5,0}
|
||||
};
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,125 @@
|
|||
/* inflate.h -- internal inflate state definition
|
||||
* Copyright (C) 1995-2016 Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
/* WARNING: this file should *not* be used by applications. It is
|
||||
part of the implementation of the compression library and is
|
||||
subject to change. Applications should only use zlib.h.
|
||||
*/
|
||||
|
||||
/* define NO_GZIP when compiling if you want to disable gzip header and
|
||||
trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
|
||||
the crc code when it is not needed. For shared libraries, gzip decoding
|
||||
should be left enabled. */
|
||||
#ifndef NO_GZIP
|
||||
# define GUNZIP
|
||||
#endif
|
||||
|
||||
/* Possible inflate modes between inflate() calls */
|
||||
typedef enum {
|
||||
HEAD = 16180, /* i: waiting for magic header */
|
||||
FLAGS, /* i: waiting for method and flags (gzip) */
|
||||
TIME, /* i: waiting for modification time (gzip) */
|
||||
OS, /* i: waiting for extra flags and operating system (gzip) */
|
||||
EXLEN, /* i: waiting for extra length (gzip) */
|
||||
EXTRA, /* i: waiting for extra bytes (gzip) */
|
||||
NAME, /* i: waiting for end of file name (gzip) */
|
||||
COMMENT, /* i: waiting for end of comment (gzip) */
|
||||
HCRC, /* i: waiting for header crc (gzip) */
|
||||
DICTID, /* i: waiting for dictionary check value */
|
||||
DICT, /* waiting for inflateSetDictionary() call */
|
||||
TYPE, /* i: waiting for type bits, including last-flag bit */
|
||||
TYPEDO, /* i: same, but skip check to exit inflate on new block */
|
||||
STORED, /* i: waiting for stored size (length and complement) */
|
||||
COPY_, /* i/o: same as COPY below, but only first time in */
|
||||
COPY, /* i/o: waiting for input or output to copy stored block */
|
||||
TABLE, /* i: waiting for dynamic block table lengths */
|
||||
LENLENS, /* i: waiting for code length code lengths */
|
||||
CODELENS, /* i: waiting for length/lit and distance code lengths */
|
||||
LEN_, /* i: same as LEN below, but only first time in */
|
||||
LEN, /* i: waiting for length/lit/eob code */
|
||||
LENEXT, /* i: waiting for length extra bits */
|
||||
DIST, /* i: waiting for distance code */
|
||||
DISTEXT, /* i: waiting for distance extra bits */
|
||||
MATCH, /* o: waiting for output space to copy string */
|
||||
LIT, /* o: waiting for output space to write literal */
|
||||
CHECK, /* i: waiting for 32-bit check value */
|
||||
LENGTH, /* i: waiting for 32-bit length (gzip) */
|
||||
DONE, /* finished check, done -- remain here until reset */
|
||||
BAD, /* got a data error -- remain here until reset */
|
||||
MEM, /* got an inflate() memory error -- remain here until reset */
|
||||
SYNC /* looking for synchronization bytes to restart inflate() */
|
||||
} inflate_mode;
|
||||
|
||||
/*
|
||||
State transitions between above modes -
|
||||
|
||||
(most modes can go to BAD or MEM on error -- not shown for clarity)
|
||||
|
||||
Process header:
|
||||
HEAD -> (gzip) or (zlib) or (raw)
|
||||
(gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
|
||||
HCRC -> TYPE
|
||||
(zlib) -> DICTID or TYPE
|
||||
DICTID -> DICT -> TYPE
|
||||
(raw) -> TYPEDO
|
||||
Read deflate blocks:
|
||||
TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
|
||||
STORED -> COPY_ -> COPY -> TYPE
|
||||
TABLE -> LENLENS -> CODELENS -> LEN_
|
||||
LEN_ -> LEN
|
||||
Read deflate codes in fixed or dynamic block:
|
||||
LEN -> LENEXT or LIT or TYPE
|
||||
LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
|
||||
LIT -> LEN
|
||||
Process trailer:
|
||||
CHECK -> LENGTH -> DONE
|
||||
*/
|
||||
|
||||
/* State maintained between inflate() calls -- approximately 7K bytes, not
|
||||
including the allocated sliding window, which is up to 32K bytes. */
|
||||
struct inflate_state {
|
||||
z_streamp strm; /* pointer back to this zlib stream */
|
||||
inflate_mode mode; /* current inflate mode */
|
||||
int last; /* true if processing last block */
|
||||
int wrap; /* bit 0 true for zlib, bit 1 true for gzip,
|
||||
bit 2 true to validate check value */
|
||||
int havedict; /* true if dictionary provided */
|
||||
int flags; /* gzip header method and flags (0 if zlib) */
|
||||
unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
|
||||
unsigned long check; /* protected copy of check value */
|
||||
unsigned long total; /* protected copy of output count */
|
||||
gz_headerp head; /* where to save gzip header information */
|
||||
/* sliding window */
|
||||
unsigned wbits; /* log base 2 of requested window size */
|
||||
unsigned wsize; /* window size or zero if not using window */
|
||||
unsigned whave; /* valid bytes in the window */
|
||||
unsigned wnext; /* window write index */
|
||||
unsigned char FAR *window; /* allocated sliding window, if needed */
|
||||
/* bit accumulator */
|
||||
unsigned long hold; /* input bit accumulator */
|
||||
unsigned bits; /* number of bits in "in" */
|
||||
/* for string and stored block copying */
|
||||
unsigned length; /* literal or length of data to copy */
|
||||
unsigned offset; /* distance back to copy string from */
|
||||
/* for table and code decoding */
|
||||
unsigned extra; /* extra bits needed */
|
||||
/* fixed and dynamic code tables */
|
||||
code const FAR *lencode; /* starting table for length/literal codes */
|
||||
code const FAR *distcode; /* starting table for distance codes */
|
||||
unsigned lenbits; /* index bits for lencode */
|
||||
unsigned distbits; /* index bits for distcode */
|
||||
/* dynamic table building */
|
||||
unsigned ncode; /* number of code length code lengths */
|
||||
unsigned nlen; /* number of length code lengths */
|
||||
unsigned ndist; /* number of distance code lengths */
|
||||
unsigned have; /* number of code lengths in lens[] */
|
||||
code FAR *next; /* next available space in codes[] */
|
||||
unsigned short lens[320]; /* temporary storage for code lengths */
|
||||
unsigned short work[288]; /* work area for code table building */
|
||||
code codes[ENOUGH]; /* space for code tables */
|
||||
int sane; /* if false, allow invalid distance too far */
|
||||
int back; /* bits back of last unprocessed length/lit */
|
||||
unsigned was; /* initial length of match */
|
||||
};
|
||||
|
|
@ -0,0 +1,304 @@
|
|||
/* inftrees.c -- generate Huffman trees for efficient decoding
|
||||
* Copyright (C) 1995-2017 Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
#include "zutil.h"
|
||||
#include "inftrees.h"
|
||||
|
||||
#define MAXBITS 15
|
||||
|
||||
const char inflate_copyright[] =
|
||||
" inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
|
||||
/*
|
||||
If you use the zlib library in a product, an acknowledgment is welcome
|
||||
in the documentation of your product. If for some reason you cannot
|
||||
include such an acknowledgment, I would appreciate that you keep this
|
||||
copyright string in the executable of your product.
|
||||
*/
|
||||
|
||||
/*
|
||||
Build a set of tables to decode the provided canonical Huffman code.
|
||||
The code lengths are lens[0..codes-1]. The result starts at *table,
|
||||
whose indices are 0..2^bits-1. work is a writable array of at least
|
||||
lens shorts, which is used as a work area. type is the type of code
|
||||
to be generated, CODES, LENS, or DISTS. On return, zero is success,
|
||||
-1 is an invalid code, and +1 means that ENOUGH isn't enough. table
|
||||
on return points to the next available entry's address. bits is the
|
||||
requested root table index bits, and on return it is the actual root
|
||||
table index bits. It will differ if the request is greater than the
|
||||
longest code or if it is less than the shortest code.
|
||||
*/
|
||||
int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
|
||||
codetype type;
|
||||
unsigned short FAR *lens;
|
||||
unsigned codes;
|
||||
code FAR * FAR *table;
|
||||
unsigned FAR *bits;
|
||||
unsigned short FAR *work;
|
||||
{
|
||||
unsigned len; /* a code's length in bits */
|
||||
unsigned sym; /* index of code symbols */
|
||||
unsigned min, max; /* minimum and maximum code lengths */
|
||||
unsigned root; /* number of index bits for root table */
|
||||
unsigned curr; /* number of index bits for current table */
|
||||
unsigned drop; /* code bits to drop for sub-table */
|
||||
int left; /* number of prefix codes available */
|
||||
unsigned used; /* code entries in table used */
|
||||
unsigned huff; /* Huffman code */
|
||||
unsigned incr; /* for incrementing code, index */
|
||||
unsigned fill; /* index for replicating entries */
|
||||
unsigned low; /* low bits for current root entry */
|
||||
unsigned mask; /* mask for low root bits */
|
||||
code here; /* table entry for duplication */
|
||||
code FAR *next; /* next available space in table */
|
||||
const unsigned short FAR *base; /* base value table to use */
|
||||
const unsigned short FAR *extra; /* extra bits table to use */
|
||||
unsigned match; /* use base and extra for symbol >= match */
|
||||
unsigned short count[MAXBITS+1]; /* number of codes of each length */
|
||||
unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
|
||||
static const unsigned short lbase[31] = { /* Length codes 257..285 base */
|
||||
3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
|
||||
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
|
||||
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
|
||||
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
|
||||
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
|
||||
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
|
||||
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
|
||||
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
|
||||
8193, 12289, 16385, 24577, 0, 0};
|
||||
static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
|
||||
16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
|
||||
23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
|
||||
28, 28, 29, 29, 64, 64};
|
||||
|
||||
/*
|
||||
Process a set of code lengths to create a canonical Huffman code. The
|
||||
code lengths are lens[0..codes-1]. Each length corresponds to the
|
||||
symbols 0..codes-1. The Huffman code is generated by first sorting the
|
||||
symbols by length from short to long, and retaining the symbol order
|
||||
for codes with equal lengths. Then the code starts with all zero bits
|
||||
for the first code of the shortest length, and the codes are integer
|
||||
increments for the same length, and zeros are appended as the length
|
||||
increases. For the deflate format, these bits are stored backwards
|
||||
from their more natural integer increment ordering, and so when the
|
||||
decoding tables are built in the large loop below, the integer codes
|
||||
are incremented backwards.
|
||||
|
||||
This routine assumes, but does not check, that all of the entries in
|
||||
lens[] are in the range 0..MAXBITS. The caller must assure this.
|
||||
1..MAXBITS is interpreted as that code length. zero means that that
|
||||
symbol does not occur in this code.
|
||||
|
||||
The codes are sorted by computing a count of codes for each length,
|
||||
creating from that a table of starting indices for each length in the
|
||||
sorted table, and then entering the symbols in order in the sorted
|
||||
table. The sorted table is work[], with that space being provided by
|
||||
the caller.
|
||||
|
||||
The length counts are used for other purposes as well, i.e. finding
|
||||
the minimum and maximum length codes, determining if there are any
|
||||
codes at all, checking for a valid set of lengths, and looking ahead
|
||||
at length counts to determine sub-table sizes when building the
|
||||
decoding tables.
|
||||
*/
|
||||
|
||||
/* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
|
||||
for (len = 0; len <= MAXBITS; len++)
|
||||
count[len] = 0;
|
||||
for (sym = 0; sym < codes; sym++)
|
||||
count[lens[sym]]++;
|
||||
|
||||
/* bound code lengths, force root to be within code lengths */
|
||||
root = *bits;
|
||||
for (max = MAXBITS; max >= 1; max--)
|
||||
if (count[max] != 0) break;
|
||||
if (root > max) root = max;
|
||||
if (max == 0) { /* no symbols to code at all */
|
||||
here.op = (unsigned char)64; /* invalid code marker */
|
||||
here.bits = (unsigned char)1;
|
||||
here.val = (unsigned short)0;
|
||||
*(*table)++ = here; /* make a table to force an error */
|
||||
*(*table)++ = here;
|
||||
*bits = 1;
|
||||
return 0; /* no symbols, but wait for decoding to report error */
|
||||
}
|
||||
for (min = 1; min < max; min++)
|
||||
if (count[min] != 0) break;
|
||||
if (root < min) root = min;
|
||||
|
||||
/* check for an over-subscribed or incomplete set of lengths */
|
||||
left = 1;
|
||||
for (len = 1; len <= MAXBITS; len++) {
|
||||
left <<= 1;
|
||||
left -= count[len];
|
||||
if (left < 0) return -1; /* over-subscribed */
|
||||
}
|
||||
if (left > 0 && (type == CODES || max != 1))
|
||||
return -1; /* incomplete set */
|
||||
|
||||
/* generate offsets into symbol table for each length for sorting */
|
||||
offs[1] = 0;
|
||||
for (len = 1; len < MAXBITS; len++)
|
||||
offs[len + 1] = offs[len] + count[len];
|
||||
|
||||
/* sort symbols by length, by symbol order within each length */
|
||||
for (sym = 0; sym < codes; sym++)
|
||||
if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
|
||||
|
||||
/*
|
||||
Create and fill in decoding tables. In this loop, the table being
|
||||
filled is at next and has curr index bits. The code being used is huff
|
||||
with length len. That code is converted to an index by dropping drop
|
||||
bits off of the bottom. For codes where len is less than drop + curr,
|
||||
those top drop + curr - len bits are incremented through all values to
|
||||
fill the table with replicated entries.
|
||||
|
||||
root is the number of index bits for the root table. When len exceeds
|
||||
root, sub-tables are created pointed to by the root entry with an index
|
||||
of the low root bits of huff. This is saved in low to check for when a
|
||||
new sub-table should be started. drop is zero when the root table is
|
||||
being filled, and drop is root when sub-tables are being filled.
|
||||
|
||||
When a new sub-table is needed, it is necessary to look ahead in the
|
||||
code lengths to determine what size sub-table is needed. The length
|
||||
counts are used for this, and so count[] is decremented as codes are
|
||||
entered in the tables.
|
||||
|
||||
used keeps track of how many table entries have been allocated from the
|
||||
provided *table space. It is checked for LENS and DIST tables against
|
||||
the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
|
||||
the initial root table size constants. See the comments in inftrees.h
|
||||
for more information.
|
||||
|
||||
sym increments through all symbols, and the loop terminates when
|
||||
all codes of length max, i.e. all codes, have been processed. This
|
||||
routine permits incomplete codes, so another loop after this one fills
|
||||
in the rest of the decoding tables with invalid code markers.
|
||||
*/
|
||||
|
||||
/* set up for code type */
|
||||
switch (type) {
|
||||
case CODES:
|
||||
base = extra = work; /* dummy value--not used */
|
||||
match = 20;
|
||||
break;
|
||||
case LENS:
|
||||
base = lbase;
|
||||
extra = lext;
|
||||
match = 257;
|
||||
break;
|
||||
default: /* DISTS */
|
||||
base = dbase;
|
||||
extra = dext;
|
||||
match = 0;
|
||||
}
|
||||
|
||||
/* initialize state for loop */
|
||||
huff = 0; /* starting code */
|
||||
sym = 0; /* starting code symbol */
|
||||
len = min; /* starting code length */
|
||||
next = *table; /* current table to fill in */
|
||||
curr = root; /* current table index bits */
|
||||
drop = 0; /* current bits to drop from code for index */
|
||||
low = (unsigned)(-1); /* trigger new sub-table when len > root */
|
||||
used = 1U << root; /* use root table entries */
|
||||
mask = used - 1; /* mask for comparing low */
|
||||
|
||||
/* check available table space */
|
||||
if ((type == LENS && used > ENOUGH_LENS) ||
|
||||
(type == DISTS && used > ENOUGH_DISTS))
|
||||
return 1;
|
||||
|
||||
/* process all codes and make table entries */
|
||||
for (;;) {
|
||||
/* create table entry */
|
||||
here.bits = (unsigned char)(len - drop);
|
||||
if (work[sym] + 1U < match) {
|
||||
here.op = (unsigned char)0;
|
||||
here.val = work[sym];
|
||||
}
|
||||
else if (work[sym] >= match) {
|
||||
here.op = (unsigned char)(extra[work[sym] - match]);
|
||||
here.val = base[work[sym] - match];
|
||||
}
|
||||
else {
|
||||
here.op = (unsigned char)(32 + 64); /* end of block */
|
||||
here.val = 0;
|
||||
}
|
||||
|
||||
/* replicate for those indices with low len bits equal to huff */
|
||||
incr = 1U << (len - drop);
|
||||
fill = 1U << curr;
|
||||
min = fill; /* save offset to next table */
|
||||
do {
|
||||
fill -= incr;
|
||||
next[(huff >> drop) + fill] = here;
|
||||
} while (fill != 0);
|
||||
|
||||
/* backwards increment the len-bit code huff */
|
||||
incr = 1U << (len - 1);
|
||||
while (huff & incr)
|
||||
incr >>= 1;
|
||||
if (incr != 0) {
|
||||
huff &= incr - 1;
|
||||
huff += incr;
|
||||
}
|
||||
else
|
||||
huff = 0;
|
||||
|
||||
/* go to next symbol, update count, len */
|
||||
sym++;
|
||||
if (--(count[len]) == 0) {
|
||||
if (len == max) break;
|
||||
len = lens[work[sym]];
|
||||
}
|
||||
|
||||
/* create new sub-table if needed */
|
||||
if (len > root && (huff & mask) != low) {
|
||||
/* if first time, transition to sub-tables */
|
||||
if (drop == 0)
|
||||
drop = root;
|
||||
|
||||
/* increment past last table */
|
||||
next += min; /* here min is 1 << curr */
|
||||
|
||||
/* determine length of next table */
|
||||
curr = len - drop;
|
||||
left = (int)(1 << curr);
|
||||
while (curr + drop < max) {
|
||||
left -= count[curr + drop];
|
||||
if (left <= 0) break;
|
||||
curr++;
|
||||
left <<= 1;
|
||||
}
|
||||
|
||||
/* check for enough space */
|
||||
used += 1U << curr;
|
||||
if ((type == LENS && used > ENOUGH_LENS) ||
|
||||
(type == DISTS && used > ENOUGH_DISTS))
|
||||
return 1;
|
||||
|
||||
/* point entry in root table to sub-table */
|
||||
low = huff & mask;
|
||||
(*table)[low].op = (unsigned char)curr;
|
||||
(*table)[low].bits = (unsigned char)root;
|
||||
(*table)[low].val = (unsigned short)(next - *table);
|
||||
}
|
||||
}
|
||||
|
||||
/* fill in remaining table entry if code is incomplete (guaranteed to have
|
||||
at most one remaining entry, since if the code is incomplete, the
|
||||
maximum code length that was allowed to get this far is one bit) */
|
||||
if (huff != 0) {
|
||||
here.op = (unsigned char)64; /* invalid code marker */
|
||||
here.bits = (unsigned char)(len - drop);
|
||||
here.val = (unsigned short)0;
|
||||
next[huff] = here;
|
||||
}
|
||||
|
||||
/* set return parameters */
|
||||
*table += used;
|
||||
*bits = root;
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
/* inftrees.h -- header to use inftrees.c
|
||||
* Copyright (C) 1995-2005, 2010 Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
/* WARNING: this file should *not* be used by applications. It is
|
||||
part of the implementation of the compression library and is
|
||||
subject to change. Applications should only use zlib.h.
|
||||
*/
|
||||
|
||||
/* Structure for decoding tables. Each entry provides either the
|
||||
information needed to do the operation requested by the code that
|
||||
indexed that table entry, or it provides a pointer to another
|
||||
table that indexes more bits of the code. op indicates whether
|
||||
the entry is a pointer to another table, a literal, a length or
|
||||
distance, an end-of-block, or an invalid code. For a table
|
||||
pointer, the low four bits of op is the number of index bits of
|
||||
that table. For a length or distance, the low four bits of op
|
||||
is the number of extra bits to get after the code. bits is
|
||||
the number of bits in this code or part of the code to drop off
|
||||
of the bit buffer. val is the actual byte to output in the case
|
||||
of a literal, the base length or distance, or the offset from
|
||||
the current table to the next table. Each entry is four bytes. */
|
||||
typedef struct {
|
||||
unsigned char op; /* operation, extra bits, table bits */
|
||||
unsigned char bits; /* bits in this part of the code */
|
||||
unsigned short val; /* offset in table or code value */
|
||||
} code;
|
||||
|
||||
/* op values as set by inflate_table():
|
||||
00000000 - literal
|
||||
0000tttt - table link, tttt != 0 is the number of table index bits
|
||||
0001eeee - length or distance, eeee is the number of extra bits
|
||||
01100000 - end of block
|
||||
01000000 - invalid code
|
||||
*/
|
||||
|
||||
/* Maximum size of the dynamic table. The maximum number of code structures is
|
||||
1444, which is the sum of 852 for literal/length codes and 592 for distance
|
||||
codes. These values were found by exhaustive searches using the program
|
||||
examples/enough.c found in the zlib distribtution. The arguments to that
|
||||
program are the number of symbols, the initial root table size, and the
|
||||
maximum bit length of a code. "enough 286 9 15" for literal/length codes
|
||||
returns returns 852, and "enough 30 6 15" for distance codes returns 592.
|
||||
The initial root table size (9 or 6) is found in the fifth argument of the
|
||||
inflate_table() calls in inflate.c and infback.c. If the root table size is
|
||||
changed, then these maximum sizes would be need to be recalculated and
|
||||
updated. */
|
||||
#define ENOUGH_LENS 852
|
||||
#define ENOUGH_DISTS 592
|
||||
#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
|
||||
|
||||
/* Type of code to build for inflate_table() */
|
||||
typedef enum {
|
||||
CODES,
|
||||
LENS,
|
||||
DISTS
|
||||
} codetype;
|
||||
|
||||
int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
|
||||
unsigned codes, code FAR * FAR *table,
|
||||
unsigned FAR *bits, unsigned short FAR *work));
|
||||
|
|
@ -0,0 +1,101 @@
|
|||
/*
|
||||
* Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#include <assert.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
#include <string.h>
|
||||
#include <tf_gunzip.h>
|
||||
#include <utils.h>
|
||||
|
||||
#include "zutil.h"
|
||||
|
||||
/*
|
||||
* memory allocated by malloc() is supposed to be aligned for any built-in type
|
||||
*/
|
||||
#define ZALLOC_ALIGNMENT sizeof(void *)
|
||||
|
||||
static uintptr_t zalloc_start;
|
||||
static uintptr_t zalloc_end;
|
||||
static uintptr_t zalloc_current;
|
||||
|
||||
static void * ZLIB_INTERNAL zcalloc(void *opaque, unsigned int items,
|
||||
unsigned int size)
|
||||
{
|
||||
uintptr_t p, p_end;
|
||||
|
||||
size *= items;
|
||||
|
||||
p = round_up(zalloc_current, ZALLOC_ALIGNMENT);
|
||||
p_end = p + size;
|
||||
|
||||
if (p_end > zalloc_end)
|
||||
return NULL;
|
||||
|
||||
memset((void *)p, 0, size);
|
||||
|
||||
zalloc_current = p_end;
|
||||
|
||||
return (void *)p;
|
||||
}
|
||||
|
||||
static void ZLIB_INTERNAL zfree(void *opaque, void *ptr)
|
||||
{
|
||||
}
|
||||
|
||||
/*
|
||||
* gunzip - decompress gzip data
|
||||
* @in_buf: source of compressed input. Upon exit, the end of input.
|
||||
* @in_len: length of in_buf
|
||||
* @out_buf: destination of decompressed output. Upon exit, the end of output.
|
||||
* @out_len: length of out_buf
|
||||
* @work_buf: workspace
|
||||
* @work_len: length of workspace
|
||||
*/
|
||||
int gunzip(uintptr_t *in_buf, size_t in_len, uintptr_t *out_buf,
|
||||
size_t out_len, uintptr_t work_buf, size_t work_len)
|
||||
{
|
||||
z_stream stream;
|
||||
int zret, ret;
|
||||
|
||||
zalloc_start = work_buf;
|
||||
zalloc_end = work_buf + work_len;
|
||||
zalloc_current = zalloc_start;
|
||||
|
||||
stream.next_in = (typeof(stream.next_in))*in_buf;
|
||||
stream.avail_in = in_len;
|
||||
stream.next_out = (typeof(stream.next_out))*out_buf;
|
||||
stream.avail_out = out_len;
|
||||
stream.zalloc = zcalloc;
|
||||
stream.zfree = zfree;
|
||||
stream.opaque = (voidpf)0;
|
||||
|
||||
zret = inflateInit(&stream);
|
||||
if (zret != Z_OK) {
|
||||
ERROR("zlib: inflate init failed (ret = %d)\n", zret);
|
||||
return (zret == Z_MEM_ERROR) ? -ENOMEM : -EIO;
|
||||
}
|
||||
|
||||
zret = inflate(&stream, Z_NO_FLUSH);
|
||||
if (zret == Z_STREAM_END) {
|
||||
ret = 0;
|
||||
} else {
|
||||
if (stream.msg)
|
||||
ERROR("%s\n", stream.msg);
|
||||
ERROR("zlib: inflate failed (ret = %d)\n", zret);
|
||||
ret = (zret == Z_MEM_ERROR) ? -ENOMEM : -EIO;
|
||||
}
|
||||
|
||||
VERBOSE("zlib: %d byte input\n", stream.total_in);
|
||||
VERBOSE("zlib: %d byte output\n", stream.total_out);
|
||||
|
||||
*in_buf = (uintptr_t)stream.next_in;
|
||||
*out_buf = (uintptr_t)stream.next_out;
|
||||
|
||||
inflateEnd(&stream);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -0,0 +1,534 @@
|
|||
/* zconf.h -- configuration of the zlib compression library
|
||||
* Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
/* @(#) $Id$ */
|
||||
|
||||
#ifndef ZCONF_H
|
||||
#define ZCONF_H
|
||||
|
||||
/*
|
||||
* If you *really* need a unique prefix for all types and library functions,
|
||||
* compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
|
||||
* Even better than compiling with -DZ_PREFIX would be to use configure to set
|
||||
* this permanently in zconf.h using "./configure --zprefix".
|
||||
*/
|
||||
#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
|
||||
# define Z_PREFIX_SET
|
||||
|
||||
/* all linked symbols and init macros */
|
||||
# define _dist_code z__dist_code
|
||||
# define _length_code z__length_code
|
||||
# define _tr_align z__tr_align
|
||||
# define _tr_flush_bits z__tr_flush_bits
|
||||
# define _tr_flush_block z__tr_flush_block
|
||||
# define _tr_init z__tr_init
|
||||
# define _tr_stored_block z__tr_stored_block
|
||||
# define _tr_tally z__tr_tally
|
||||
# define adler32 z_adler32
|
||||
# define adler32_combine z_adler32_combine
|
||||
# define adler32_combine64 z_adler32_combine64
|
||||
# define adler32_z z_adler32_z
|
||||
# ifndef Z_SOLO
|
||||
# define compress z_compress
|
||||
# define compress2 z_compress2
|
||||
# define compressBound z_compressBound
|
||||
# endif
|
||||
# define crc32 z_crc32
|
||||
# define crc32_combine z_crc32_combine
|
||||
# define crc32_combine64 z_crc32_combine64
|
||||
# define crc32_z z_crc32_z
|
||||
# define deflate z_deflate
|
||||
# define deflateBound z_deflateBound
|
||||
# define deflateCopy z_deflateCopy
|
||||
# define deflateEnd z_deflateEnd
|
||||
# define deflateGetDictionary z_deflateGetDictionary
|
||||
# define deflateInit z_deflateInit
|
||||
# define deflateInit2 z_deflateInit2
|
||||
# define deflateInit2_ z_deflateInit2_
|
||||
# define deflateInit_ z_deflateInit_
|
||||
# define deflateParams z_deflateParams
|
||||
# define deflatePending z_deflatePending
|
||||
# define deflatePrime z_deflatePrime
|
||||
# define deflateReset z_deflateReset
|
||||
# define deflateResetKeep z_deflateResetKeep
|
||||
# define deflateSetDictionary z_deflateSetDictionary
|
||||
# define deflateSetHeader z_deflateSetHeader
|
||||
# define deflateTune z_deflateTune
|
||||
# define deflate_copyright z_deflate_copyright
|
||||
# define get_crc_table z_get_crc_table
|
||||
# ifndef Z_SOLO
|
||||
# define gz_error z_gz_error
|
||||
# define gz_intmax z_gz_intmax
|
||||
# define gz_strwinerror z_gz_strwinerror
|
||||
# define gzbuffer z_gzbuffer
|
||||
# define gzclearerr z_gzclearerr
|
||||
# define gzclose z_gzclose
|
||||
# define gzclose_r z_gzclose_r
|
||||
# define gzclose_w z_gzclose_w
|
||||
# define gzdirect z_gzdirect
|
||||
# define gzdopen z_gzdopen
|
||||
# define gzeof z_gzeof
|
||||
# define gzerror z_gzerror
|
||||
# define gzflush z_gzflush
|
||||
# define gzfread z_gzfread
|
||||
# define gzfwrite z_gzfwrite
|
||||
# define gzgetc z_gzgetc
|
||||
# define gzgetc_ z_gzgetc_
|
||||
# define gzgets z_gzgets
|
||||
# define gzoffset z_gzoffset
|
||||
# define gzoffset64 z_gzoffset64
|
||||
# define gzopen z_gzopen
|
||||
# define gzopen64 z_gzopen64
|
||||
# ifdef _WIN32
|
||||
# define gzopen_w z_gzopen_w
|
||||
# endif
|
||||
# define gzprintf z_gzprintf
|
||||
# define gzputc z_gzputc
|
||||
# define gzputs z_gzputs
|
||||
# define gzread z_gzread
|
||||
# define gzrewind z_gzrewind
|
||||
# define gzseek z_gzseek
|
||||
# define gzseek64 z_gzseek64
|
||||
# define gzsetparams z_gzsetparams
|
||||
# define gztell z_gztell
|
||||
# define gztell64 z_gztell64
|
||||
# define gzungetc z_gzungetc
|
||||
# define gzvprintf z_gzvprintf
|
||||
# define gzwrite z_gzwrite
|
||||
# endif
|
||||
# define inflate z_inflate
|
||||
# define inflateBack z_inflateBack
|
||||
# define inflateBackEnd z_inflateBackEnd
|
||||
# define inflateBackInit z_inflateBackInit
|
||||
# define inflateBackInit_ z_inflateBackInit_
|
||||
# define inflateCodesUsed z_inflateCodesUsed
|
||||
# define inflateCopy z_inflateCopy
|
||||
# define inflateEnd z_inflateEnd
|
||||
# define inflateGetDictionary z_inflateGetDictionary
|
||||
# define inflateGetHeader z_inflateGetHeader
|
||||
# define inflateInit z_inflateInit
|
||||
# define inflateInit2 z_inflateInit2
|
||||
# define inflateInit2_ z_inflateInit2_
|
||||
# define inflateInit_ z_inflateInit_
|
||||
# define inflateMark z_inflateMark
|
||||
# define inflatePrime z_inflatePrime
|
||||
# define inflateReset z_inflateReset
|
||||
# define inflateReset2 z_inflateReset2
|
||||
# define inflateResetKeep z_inflateResetKeep
|
||||
# define inflateSetDictionary z_inflateSetDictionary
|
||||
# define inflateSync z_inflateSync
|
||||
# define inflateSyncPoint z_inflateSyncPoint
|
||||
# define inflateUndermine z_inflateUndermine
|
||||
# define inflateValidate z_inflateValidate
|
||||
# define inflate_copyright z_inflate_copyright
|
||||
# define inflate_fast z_inflate_fast
|
||||
# define inflate_table z_inflate_table
|
||||
# ifndef Z_SOLO
|
||||
# define uncompress z_uncompress
|
||||
# define uncompress2 z_uncompress2
|
||||
# endif
|
||||
# define zError z_zError
|
||||
# ifndef Z_SOLO
|
||||
# define zcalloc z_zcalloc
|
||||
# define zcfree z_zcfree
|
||||
# endif
|
||||
# define zlibCompileFlags z_zlibCompileFlags
|
||||
# define zlibVersion z_zlibVersion
|
||||
|
||||
/* all zlib typedefs in zlib.h and zconf.h */
|
||||
# define Byte z_Byte
|
||||
# define Bytef z_Bytef
|
||||
# define alloc_func z_alloc_func
|
||||
# define charf z_charf
|
||||
# define free_func z_free_func
|
||||
# ifndef Z_SOLO
|
||||
# define gzFile z_gzFile
|
||||
# endif
|
||||
# define gz_header z_gz_header
|
||||
# define gz_headerp z_gz_headerp
|
||||
# define in_func z_in_func
|
||||
# define intf z_intf
|
||||
# define out_func z_out_func
|
||||
# define uInt z_uInt
|
||||
# define uIntf z_uIntf
|
||||
# define uLong z_uLong
|
||||
# define uLongf z_uLongf
|
||||
# define voidp z_voidp
|
||||
# define voidpc z_voidpc
|
||||
# define voidpf z_voidpf
|
||||
|
||||
/* all zlib structs in zlib.h and zconf.h */
|
||||
# define gz_header_s z_gz_header_s
|
||||
# define internal_state z_internal_state
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(__MSDOS__) && !defined(MSDOS)
|
||||
# define MSDOS
|
||||
#endif
|
||||
#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
|
||||
# define OS2
|
||||
#endif
|
||||
#if defined(_WINDOWS) && !defined(WINDOWS)
|
||||
# define WINDOWS
|
||||
#endif
|
||||
#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
|
||||
# ifndef WIN32
|
||||
# define WIN32
|
||||
# endif
|
||||
#endif
|
||||
#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
|
||||
# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
|
||||
# ifndef SYS16BIT
|
||||
# define SYS16BIT
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Compile with -DMAXSEG_64K if the alloc function cannot allocate more
|
||||
* than 64k bytes at a time (needed on systems with 16-bit int).
|
||||
*/
|
||||
#ifdef SYS16BIT
|
||||
# define MAXSEG_64K
|
||||
#endif
|
||||
#ifdef MSDOS
|
||||
# define UNALIGNED_OK
|
||||
#endif
|
||||
|
||||
#ifdef __STDC_VERSION__
|
||||
# ifndef STDC
|
||||
# define STDC
|
||||
# endif
|
||||
# if __STDC_VERSION__ >= 199901L
|
||||
# ifndef STDC99
|
||||
# define STDC99
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
|
||||
# define STDC
|
||||
#endif
|
||||
#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
|
||||
# define STDC
|
||||
#endif
|
||||
#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
|
||||
# define STDC
|
||||
#endif
|
||||
#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
|
||||
# define STDC
|
||||
#endif
|
||||
|
||||
#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
|
||||
# define STDC
|
||||
#endif
|
||||
|
||||
#ifndef STDC
|
||||
# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
|
||||
# define const /* note: need a more gentle solution here */
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if defined(ZLIB_CONST) && !defined(z_const)
|
||||
# define z_const const
|
||||
#else
|
||||
# define z_const
|
||||
#endif
|
||||
|
||||
#ifdef Z_SOLO
|
||||
typedef unsigned long z_size_t;
|
||||
#else
|
||||
# define z_longlong long long
|
||||
# if defined(NO_SIZE_T)
|
||||
typedef unsigned NO_SIZE_T z_size_t;
|
||||
# elif defined(STDC)
|
||||
# include <stddef.h>
|
||||
typedef size_t z_size_t;
|
||||
# else
|
||||
typedef unsigned long z_size_t;
|
||||
# endif
|
||||
# undef z_longlong
|
||||
#endif
|
||||
|
||||
/* Maximum value for memLevel in deflateInit2 */
|
||||
#ifndef MAX_MEM_LEVEL
|
||||
# ifdef MAXSEG_64K
|
||||
# define MAX_MEM_LEVEL 8
|
||||
# else
|
||||
# define MAX_MEM_LEVEL 9
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Maximum value for windowBits in deflateInit2 and inflateInit2.
|
||||
* WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
|
||||
* created by gzip. (Files created by minigzip can still be extracted by
|
||||
* gzip.)
|
||||
*/
|
||||
#ifndef MAX_WBITS
|
||||
# define MAX_WBITS 15 /* 32K LZ77 window */
|
||||
#endif
|
||||
|
||||
/* The memory requirements for deflate are (in bytes):
|
||||
(1 << (windowBits+2)) + (1 << (memLevel+9))
|
||||
that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
|
||||
plus a few kilobytes for small objects. For example, if you want to reduce
|
||||
the default memory requirements from 256K to 128K, compile with
|
||||
make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
|
||||
Of course this will generally degrade compression (there's no free lunch).
|
||||
|
||||
The memory requirements for inflate are (in bytes) 1 << windowBits
|
||||
that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
|
||||
for small objects.
|
||||
*/
|
||||
|
||||
/* Type declarations */
|
||||
|
||||
#ifndef OF /* function prototypes */
|
||||
# ifdef STDC
|
||||
# define OF(args) args
|
||||
# else
|
||||
# define OF(args) ()
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifndef Z_ARG /* function prototypes for stdarg */
|
||||
# if defined(STDC) || defined(Z_HAVE_STDARG_H)
|
||||
# define Z_ARG(args) args
|
||||
# else
|
||||
# define Z_ARG(args) ()
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* The following definitions for FAR are needed only for MSDOS mixed
|
||||
* model programming (small or medium model with some far allocations).
|
||||
* This was tested only with MSC; for other MSDOS compilers you may have
|
||||
* to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
|
||||
* just define FAR to be empty.
|
||||
*/
|
||||
#ifdef SYS16BIT
|
||||
# if defined(M_I86SM) || defined(M_I86MM)
|
||||
/* MSC small or medium model */
|
||||
# define SMALL_MEDIUM
|
||||
# ifdef _MSC_VER
|
||||
# define FAR _far
|
||||
# else
|
||||
# define FAR far
|
||||
# endif
|
||||
# endif
|
||||
# if (defined(__SMALL__) || defined(__MEDIUM__))
|
||||
/* Turbo C small or medium model */
|
||||
# define SMALL_MEDIUM
|
||||
# ifdef __BORLANDC__
|
||||
# define FAR _far
|
||||
# else
|
||||
# define FAR far
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if defined(WINDOWS) || defined(WIN32)
|
||||
/* If building or using zlib as a DLL, define ZLIB_DLL.
|
||||
* This is not mandatory, but it offers a little performance increase.
|
||||
*/
|
||||
# ifdef ZLIB_DLL
|
||||
# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
|
||||
# ifdef ZLIB_INTERNAL
|
||||
# define ZEXTERN extern __declspec(dllexport)
|
||||
# else
|
||||
# define ZEXTERN extern __declspec(dllimport)
|
||||
# endif
|
||||
# endif
|
||||
# endif /* ZLIB_DLL */
|
||||
/* If building or using zlib with the WINAPI/WINAPIV calling convention,
|
||||
* define ZLIB_WINAPI.
|
||||
* Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
|
||||
*/
|
||||
# ifdef ZLIB_WINAPI
|
||||
# ifdef FAR
|
||||
# undef FAR
|
||||
# endif
|
||||
# include <windows.h>
|
||||
/* No need for _export, use ZLIB.DEF instead. */
|
||||
/* For complete Windows compatibility, use WINAPI, not __stdcall. */
|
||||
# define ZEXPORT WINAPI
|
||||
# ifdef WIN32
|
||||
# define ZEXPORTVA WINAPIV
|
||||
# else
|
||||
# define ZEXPORTVA FAR CDECL
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if defined (__BEOS__)
|
||||
# ifdef ZLIB_DLL
|
||||
# ifdef ZLIB_INTERNAL
|
||||
# define ZEXPORT __declspec(dllexport)
|
||||
# define ZEXPORTVA __declspec(dllexport)
|
||||
# else
|
||||
# define ZEXPORT __declspec(dllimport)
|
||||
# define ZEXPORTVA __declspec(dllimport)
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifndef ZEXTERN
|
||||
# define ZEXTERN extern
|
||||
#endif
|
||||
#ifndef ZEXPORT
|
||||
# define ZEXPORT
|
||||
#endif
|
||||
#ifndef ZEXPORTVA
|
||||
# define ZEXPORTVA
|
||||
#endif
|
||||
|
||||
#ifndef FAR
|
||||
# define FAR
|
||||
#endif
|
||||
|
||||
#if !defined(__MACTYPES__)
|
||||
typedef unsigned char Byte; /* 8 bits */
|
||||
#endif
|
||||
typedef unsigned int uInt; /* 16 bits or more */
|
||||
typedef unsigned long uLong; /* 32 bits or more */
|
||||
|
||||
#ifdef SMALL_MEDIUM
|
||||
/* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
|
||||
# define Bytef Byte FAR
|
||||
#else
|
||||
typedef Byte FAR Bytef;
|
||||
#endif
|
||||
typedef char FAR charf;
|
||||
typedef int FAR intf;
|
||||
typedef uInt FAR uIntf;
|
||||
typedef uLong FAR uLongf;
|
||||
|
||||
#ifdef STDC
|
||||
typedef void const *voidpc;
|
||||
typedef void FAR *voidpf;
|
||||
typedef void *voidp;
|
||||
#else
|
||||
typedef Byte const *voidpc;
|
||||
typedef Byte FAR *voidpf;
|
||||
typedef Byte *voidp;
|
||||
#endif
|
||||
|
||||
#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
|
||||
# include <limits.h>
|
||||
# if (UINT_MAX == 0xffffffffUL)
|
||||
# define Z_U4 unsigned
|
||||
# elif (ULONG_MAX == 0xffffffffUL)
|
||||
# define Z_U4 unsigned long
|
||||
# elif (USHRT_MAX == 0xffffffffUL)
|
||||
# define Z_U4 unsigned short
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifdef Z_U4
|
||||
typedef Z_U4 z_crc_t;
|
||||
#else
|
||||
typedef unsigned long z_crc_t;
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
|
||||
# define Z_HAVE_UNISTD_H
|
||||
#endif
|
||||
|
||||
#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
|
||||
# define Z_HAVE_STDARG_H
|
||||
#endif
|
||||
|
||||
#ifdef STDC
|
||||
# ifndef Z_SOLO
|
||||
# include <sys/types.h> /* for off_t */
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
|
||||
# ifndef Z_SOLO
|
||||
# include <stdarg.h> /* for va_list */
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifdef _WIN32
|
||||
# ifndef Z_SOLO
|
||||
# include <stddef.h> /* for wchar_t */
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
|
||||
* "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
|
||||
* though the former does not conform to the LFS document), but considering
|
||||
* both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
|
||||
* equivalently requesting no 64-bit operations
|
||||
*/
|
||||
#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
|
||||
# undef _LARGEFILE64_SOURCE
|
||||
#endif
|
||||
|
||||
#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
|
||||
# define Z_HAVE_UNISTD_H
|
||||
#endif
|
||||
#ifndef Z_SOLO
|
||||
# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
|
||||
# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
|
||||
# ifdef VMS
|
||||
# include <unixio.h> /* for off_t */
|
||||
# endif
|
||||
# ifndef z_off_t
|
||||
# define z_off_t off_t
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
|
||||
# define Z_LFS64
|
||||
#endif
|
||||
|
||||
#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
|
||||
# define Z_LARGE64
|
||||
#endif
|
||||
|
||||
#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
|
||||
# define Z_WANT64
|
||||
#endif
|
||||
|
||||
#if !defined(SEEK_SET) && !defined(Z_SOLO)
|
||||
# define SEEK_SET 0 /* Seek from beginning of file. */
|
||||
# define SEEK_CUR 1 /* Seek from current position. */
|
||||
# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
|
||||
#endif
|
||||
|
||||
#ifndef z_off_t
|
||||
# define z_off_t long
|
||||
#endif
|
||||
|
||||
#if !defined(_WIN32) && defined(Z_LARGE64)
|
||||
# define z_off64_t off64_t
|
||||
#else
|
||||
# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
|
||||
# define z_off64_t __int64
|
||||
# else
|
||||
# define z_off64_t z_off_t
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* MVS linker does not support external names larger than 8 bytes */
|
||||
#if defined(__MVS__)
|
||||
#pragma map(deflateInit_,"DEIN")
|
||||
#pragma map(deflateInit2_,"DEIN2")
|
||||
#pragma map(deflateEnd,"DEEND")
|
||||
#pragma map(deflateBound,"DEBND")
|
||||
#pragma map(inflateInit_,"ININ")
|
||||
#pragma map(inflateInit2_,"ININ2")
|
||||
#pragma map(inflateEnd,"INEND")
|
||||
#pragma map(inflateSync,"INSY")
|
||||
#pragma map(inflateSetDictionary,"INSEDI")
|
||||
#pragma map(compressBound,"CMBND")
|
||||
#pragma map(inflate_table,"INTABL")
|
||||
#pragma map(inflate_fast,"INFA")
|
||||
#pragma map(inflate_copyright,"INCOPY")
|
||||
#endif
|
||||
|
||||
#endif /* ZCONF_H */
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,25 @@
|
|||
#
|
||||
# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-3-Clause
|
||||
#
|
||||
|
||||
ZLIB_PATH := lib/zlib
|
||||
|
||||
# Imported from zlib 1.2.11 (do not modify them)
|
||||
ZLIB_SOURCES := $(addprefix $(ZLIB_PATH)/, \
|
||||
adler32.c \
|
||||
crc32.c \
|
||||
inffast.c \
|
||||
inflate.c \
|
||||
inftrees.c \
|
||||
zutil.c)
|
||||
|
||||
# Implemented for TF
|
||||
ZLIB_SOURCES += $(addprefix $(ZLIB_PATH)/, \
|
||||
tf_gunzip.c)
|
||||
|
||||
INCLUDES += -Iinclude/lib/zlib
|
||||
|
||||
# REVISIT: the following flags need not be given globally
|
||||
TF_CFLAGS += -DZ_SOLO -DDEF_WBITS=31
|
||||
|
|
@ -0,0 +1,325 @@
|
|||
/* zutil.c -- target dependent utility functions for the compression library
|
||||
* Copyright (C) 1995-2017 Jean-loup Gailly
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
/* @(#) $Id$ */
|
||||
|
||||
#include "zutil.h"
|
||||
#ifndef Z_SOLO
|
||||
# include "gzguts.h"
|
||||
#endif
|
||||
|
||||
z_const char * const z_errmsg[10] = {
|
||||
(z_const char *)"need dictionary", /* Z_NEED_DICT 2 */
|
||||
(z_const char *)"stream end", /* Z_STREAM_END 1 */
|
||||
(z_const char *)"", /* Z_OK 0 */
|
||||
(z_const char *)"file error", /* Z_ERRNO (-1) */
|
||||
(z_const char *)"stream error", /* Z_STREAM_ERROR (-2) */
|
||||
(z_const char *)"data error", /* Z_DATA_ERROR (-3) */
|
||||
(z_const char *)"insufficient memory", /* Z_MEM_ERROR (-4) */
|
||||
(z_const char *)"buffer error", /* Z_BUF_ERROR (-5) */
|
||||
(z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */
|
||||
(z_const char *)""
|
||||
};
|
||||
|
||||
|
||||
const char * ZEXPORT zlibVersion()
|
||||
{
|
||||
return ZLIB_VERSION;
|
||||
}
|
||||
|
||||
uLong ZEXPORT zlibCompileFlags()
|
||||
{
|
||||
uLong flags;
|
||||
|
||||
flags = 0;
|
||||
switch ((int)(sizeof(uInt))) {
|
||||
case 2: break;
|
||||
case 4: flags += 1; break;
|
||||
case 8: flags += 2; break;
|
||||
default: flags += 3;
|
||||
}
|
||||
switch ((int)(sizeof(uLong))) {
|
||||
case 2: break;
|
||||
case 4: flags += 1 << 2; break;
|
||||
case 8: flags += 2 << 2; break;
|
||||
default: flags += 3 << 2;
|
||||
}
|
||||
switch ((int)(sizeof(voidpf))) {
|
||||
case 2: break;
|
||||
case 4: flags += 1 << 4; break;
|
||||
case 8: flags += 2 << 4; break;
|
||||
default: flags += 3 << 4;
|
||||
}
|
||||
switch ((int)(sizeof(z_off_t))) {
|
||||
case 2: break;
|
||||
case 4: flags += 1 << 6; break;
|
||||
case 8: flags += 2 << 6; break;
|
||||
default: flags += 3 << 6;
|
||||
}
|
||||
#ifdef ZLIB_DEBUG
|
||||
flags += 1 << 8;
|
||||
#endif
|
||||
#if defined(ASMV) || defined(ASMINF)
|
||||
flags += 1 << 9;
|
||||
#endif
|
||||
#ifdef ZLIB_WINAPI
|
||||
flags += 1 << 10;
|
||||
#endif
|
||||
#ifdef BUILDFIXED
|
||||
flags += 1 << 12;
|
||||
#endif
|
||||
#ifdef DYNAMIC_CRC_TABLE
|
||||
flags += 1 << 13;
|
||||
#endif
|
||||
#ifdef NO_GZCOMPRESS
|
||||
flags += 1L << 16;
|
||||
#endif
|
||||
#ifdef NO_GZIP
|
||||
flags += 1L << 17;
|
||||
#endif
|
||||
#ifdef PKZIP_BUG_WORKAROUND
|
||||
flags += 1L << 20;
|
||||
#endif
|
||||
#ifdef FASTEST
|
||||
flags += 1L << 21;
|
||||
#endif
|
||||
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
|
||||
# ifdef NO_vsnprintf
|
||||
flags += 1L << 25;
|
||||
# ifdef HAS_vsprintf_void
|
||||
flags += 1L << 26;
|
||||
# endif
|
||||
# else
|
||||
# ifdef HAS_vsnprintf_void
|
||||
flags += 1L << 26;
|
||||
# endif
|
||||
# endif
|
||||
#else
|
||||
flags += 1L << 24;
|
||||
# ifdef NO_snprintf
|
||||
flags += 1L << 25;
|
||||
# ifdef HAS_sprintf_void
|
||||
flags += 1L << 26;
|
||||
# endif
|
||||
# else
|
||||
# ifdef HAS_snprintf_void
|
||||
flags += 1L << 26;
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
return flags;
|
||||
}
|
||||
|
||||
#ifdef ZLIB_DEBUG
|
||||
#include <stdlib.h>
|
||||
# ifndef verbose
|
||||
# define verbose 0
|
||||
# endif
|
||||
int ZLIB_INTERNAL z_verbose = verbose;
|
||||
|
||||
void ZLIB_INTERNAL z_error (m)
|
||||
char *m;
|
||||
{
|
||||
fprintf(stderr, "%s\n", m);
|
||||
exit(1);
|
||||
}
|
||||
#endif
|
||||
|
||||
/* exported to allow conversion of error code to string for compress() and
|
||||
* uncompress()
|
||||
*/
|
||||
const char * ZEXPORT zError(err)
|
||||
int err;
|
||||
{
|
||||
return ERR_MSG(err);
|
||||
}
|
||||
|
||||
#if defined(_WIN32_WCE)
|
||||
/* The Microsoft C Run-Time Library for Windows CE doesn't have
|
||||
* errno. We define it as a global variable to simplify porting.
|
||||
* Its value is always 0 and should not be used.
|
||||
*/
|
||||
int errno = 0;
|
||||
#endif
|
||||
|
||||
#ifndef HAVE_MEMCPY
|
||||
|
||||
void ZLIB_INTERNAL zmemcpy(dest, source, len)
|
||||
Bytef* dest;
|
||||
const Bytef* source;
|
||||
uInt len;
|
||||
{
|
||||
if (len == 0) return;
|
||||
do {
|
||||
*dest++ = *source++; /* ??? to be unrolled */
|
||||
} while (--len != 0);
|
||||
}
|
||||
|
||||
int ZLIB_INTERNAL zmemcmp(s1, s2, len)
|
||||
const Bytef* s1;
|
||||
const Bytef* s2;
|
||||
uInt len;
|
||||
{
|
||||
uInt j;
|
||||
|
||||
for (j = 0; j < len; j++) {
|
||||
if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
void ZLIB_INTERNAL zmemzero(dest, len)
|
||||
Bytef* dest;
|
||||
uInt len;
|
||||
{
|
||||
if (len == 0) return;
|
||||
do {
|
||||
*dest++ = 0; /* ??? to be unrolled */
|
||||
} while (--len != 0);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifndef Z_SOLO
|
||||
|
||||
#ifdef SYS16BIT
|
||||
|
||||
#ifdef __TURBOC__
|
||||
/* Turbo C in 16-bit mode */
|
||||
|
||||
# define MY_ZCALLOC
|
||||
|
||||
/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
|
||||
* and farmalloc(64K) returns a pointer with an offset of 8, so we
|
||||
* must fix the pointer. Warning: the pointer must be put back to its
|
||||
* original form in order to free it, use zcfree().
|
||||
*/
|
||||
|
||||
#define MAX_PTR 10
|
||||
/* 10*64K = 640K */
|
||||
|
||||
local int next_ptr = 0;
|
||||
|
||||
typedef struct ptr_table_s {
|
||||
voidpf org_ptr;
|
||||
voidpf new_ptr;
|
||||
} ptr_table;
|
||||
|
||||
local ptr_table table[MAX_PTR];
|
||||
/* This table is used to remember the original form of pointers
|
||||
* to large buffers (64K). Such pointers are normalized with a zero offset.
|
||||
* Since MSDOS is not a preemptive multitasking OS, this table is not
|
||||
* protected from concurrent access. This hack doesn't work anyway on
|
||||
* a protected system like OS/2. Use Microsoft C instead.
|
||||
*/
|
||||
|
||||
voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
|
||||
{
|
||||
voidpf buf;
|
||||
ulg bsize = (ulg)items*size;
|
||||
|
||||
(void)opaque;
|
||||
|
||||
/* If we allocate less than 65520 bytes, we assume that farmalloc
|
||||
* will return a usable pointer which doesn't have to be normalized.
|
||||
*/
|
||||
if (bsize < 65520L) {
|
||||
buf = farmalloc(bsize);
|
||||
if (*(ush*)&buf != 0) return buf;
|
||||
} else {
|
||||
buf = farmalloc(bsize + 16L);
|
||||
}
|
||||
if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
|
||||
table[next_ptr].org_ptr = buf;
|
||||
|
||||
/* Normalize the pointer to seg:0 */
|
||||
*((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
|
||||
*(ush*)&buf = 0;
|
||||
table[next_ptr++].new_ptr = buf;
|
||||
return buf;
|
||||
}
|
||||
|
||||
void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
|
||||
{
|
||||
int n;
|
||||
|
||||
(void)opaque;
|
||||
|
||||
if (*(ush*)&ptr != 0) { /* object < 64K */
|
||||
farfree(ptr);
|
||||
return;
|
||||
}
|
||||
/* Find the original pointer */
|
||||
for (n = 0; n < next_ptr; n++) {
|
||||
if (ptr != table[n].new_ptr) continue;
|
||||
|
||||
farfree(table[n].org_ptr);
|
||||
while (++n < next_ptr) {
|
||||
table[n-1] = table[n];
|
||||
}
|
||||
next_ptr--;
|
||||
return;
|
||||
}
|
||||
Assert(0, "zcfree: ptr not found");
|
||||
}
|
||||
|
||||
#endif /* __TURBOC__ */
|
||||
|
||||
|
||||
#ifdef M_I86
|
||||
/* Microsoft C in 16-bit mode */
|
||||
|
||||
# define MY_ZCALLOC
|
||||
|
||||
#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
|
||||
# define _halloc halloc
|
||||
# define _hfree hfree
|
||||
#endif
|
||||
|
||||
voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
|
||||
{
|
||||
(void)opaque;
|
||||
return _halloc((long)items, size);
|
||||
}
|
||||
|
||||
void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
|
||||
{
|
||||
(void)opaque;
|
||||
_hfree(ptr);
|
||||
}
|
||||
|
||||
#endif /* M_I86 */
|
||||
|
||||
#endif /* SYS16BIT */
|
||||
|
||||
|
||||
#ifndef MY_ZCALLOC /* Any system without a special alloc function */
|
||||
|
||||
#ifndef STDC
|
||||
extern voidp malloc OF((uInt size));
|
||||
extern voidp calloc OF((uInt items, uInt size));
|
||||
extern void free OF((voidpf ptr));
|
||||
#endif
|
||||
|
||||
voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
|
||||
voidpf opaque;
|
||||
unsigned items;
|
||||
unsigned size;
|
||||
{
|
||||
(void)opaque;
|
||||
return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
|
||||
(voidpf)calloc(items, size);
|
||||
}
|
||||
|
||||
void ZLIB_INTERNAL zcfree (opaque, ptr)
|
||||
voidpf opaque;
|
||||
voidpf ptr;
|
||||
{
|
||||
(void)opaque;
|
||||
free(ptr);
|
||||
}
|
||||
|
||||
#endif /* MY_ZCALLOC */
|
||||
|
||||
#endif /* !Z_SOLO */
|
||||
|
|
@ -0,0 +1,271 @@
|
|||
/* zutil.h -- internal interface and configuration of the compression library
|
||||
* Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
|
||||
* For conditions of distribution and use, see copyright notice in zlib.h
|
||||
*/
|
||||
|
||||
/* WARNING: this file should *not* be used by applications. It is
|
||||
part of the implementation of the compression library and is
|
||||
subject to change. Applications should only use zlib.h.
|
||||
*/
|
||||
|
||||
/* @(#) $Id$ */
|
||||
|
||||
#ifndef ZUTIL_H
|
||||
#define ZUTIL_H
|
||||
|
||||
#ifdef HAVE_HIDDEN
|
||||
# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
|
||||
#else
|
||||
# define ZLIB_INTERNAL
|
||||
#endif
|
||||
|
||||
#include "zlib.h"
|
||||
|
||||
#if defined(STDC) && !defined(Z_SOLO)
|
||||
# if !(defined(_WIN32_WCE) && defined(_MSC_VER))
|
||||
# include <stddef.h>
|
||||
# endif
|
||||
# include <string.h>
|
||||
# include <stdlib.h>
|
||||
#endif
|
||||
|
||||
#ifdef Z_SOLO
|
||||
typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */
|
||||
#endif
|
||||
|
||||
#ifndef local
|
||||
# define local static
|
||||
#endif
|
||||
/* since "static" is used to mean two completely different things in C, we
|
||||
define "local" for the non-static meaning of "static", for readability
|
||||
(compile with -Dlocal if your debugger can't find static symbols) */
|
||||
|
||||
typedef unsigned char uch;
|
||||
typedef uch FAR uchf;
|
||||
typedef unsigned short ush;
|
||||
typedef ush FAR ushf;
|
||||
typedef unsigned long ulg;
|
||||
|
||||
extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
|
||||
/* (size given to avoid silly warnings with Visual C++) */
|
||||
|
||||
#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
|
||||
|
||||
#define ERR_RETURN(strm,err) \
|
||||
return (strm->msg = ERR_MSG(err), (err))
|
||||
/* To be used only when the state is known to be valid */
|
||||
|
||||
/* common constants */
|
||||
|
||||
#ifndef DEF_WBITS
|
||||
# define DEF_WBITS MAX_WBITS
|
||||
#endif
|
||||
/* default windowBits for decompression. MAX_WBITS is for compression only */
|
||||
|
||||
#if MAX_MEM_LEVEL >= 8
|
||||
# define DEF_MEM_LEVEL 8
|
||||
#else
|
||||
# define DEF_MEM_LEVEL MAX_MEM_LEVEL
|
||||
#endif
|
||||
/* default memLevel */
|
||||
|
||||
#define STORED_BLOCK 0
|
||||
#define STATIC_TREES 1
|
||||
#define DYN_TREES 2
|
||||
/* The three kinds of block type */
|
||||
|
||||
#define MIN_MATCH 3
|
||||
#define MAX_MATCH 258
|
||||
/* The minimum and maximum match lengths */
|
||||
|
||||
#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
|
||||
|
||||
/* target dependencies */
|
||||
|
||||
#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
|
||||
# define OS_CODE 0x00
|
||||
# ifndef Z_SOLO
|
||||
# if defined(__TURBOC__) || defined(__BORLANDC__)
|
||||
# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
|
||||
/* Allow compilation with ANSI keywords only enabled */
|
||||
void _Cdecl farfree( void *block );
|
||||
void *_Cdecl farmalloc( unsigned long nbytes );
|
||||
# else
|
||||
# include <alloc.h>
|
||||
# endif
|
||||
# else /* MSC or DJGPP */
|
||||
# include <malloc.h>
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifdef AMIGA
|
||||
# define OS_CODE 1
|
||||
#endif
|
||||
|
||||
#if defined(VAXC) || defined(VMS)
|
||||
# define OS_CODE 2
|
||||
# define F_OPEN(name, mode) \
|
||||
fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
|
||||
#endif
|
||||
|
||||
#ifdef __370__
|
||||
# if __TARGET_LIB__ < 0x20000000
|
||||
# define OS_CODE 4
|
||||
# elif __TARGET_LIB__ < 0x40000000
|
||||
# define OS_CODE 11
|
||||
# else
|
||||
# define OS_CODE 8
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if defined(ATARI) || defined(atarist)
|
||||
# define OS_CODE 5
|
||||
#endif
|
||||
|
||||
#ifdef OS2
|
||||
# define OS_CODE 6
|
||||
# if defined(M_I86) && !defined(Z_SOLO)
|
||||
# include <malloc.h>
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if defined(MACOS) || defined(TARGET_OS_MAC)
|
||||
# define OS_CODE 7
|
||||
# ifndef Z_SOLO
|
||||
# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
|
||||
# include <unix.h> /* for fdopen */
|
||||
# else
|
||||
# ifndef fdopen
|
||||
# define fdopen(fd,mode) NULL /* No fdopen() */
|
||||
# endif
|
||||
# endif
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifdef __acorn
|
||||
# define OS_CODE 13
|
||||
#endif
|
||||
|
||||
#if defined(WIN32) && !defined(__CYGWIN__)
|
||||
# define OS_CODE 10
|
||||
#endif
|
||||
|
||||
#ifdef _BEOS_
|
||||
# define OS_CODE 16
|
||||
#endif
|
||||
|
||||
#ifdef __TOS_OS400__
|
||||
# define OS_CODE 18
|
||||
#endif
|
||||
|
||||
#ifdef __APPLE__
|
||||
# define OS_CODE 19
|
||||
#endif
|
||||
|
||||
#if defined(_BEOS_) || defined(RISCOS)
|
||||
# define fdopen(fd,mode) NULL /* No fdopen() */
|
||||
#endif
|
||||
|
||||
#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
|
||||
# if defined(_WIN32_WCE)
|
||||
# define fdopen(fd,mode) NULL /* No fdopen() */
|
||||
# ifndef _PTRDIFF_T_DEFINED
|
||||
typedef int ptrdiff_t;
|
||||
# define _PTRDIFF_T_DEFINED
|
||||
# endif
|
||||
# else
|
||||
# define fdopen(fd,type) _fdopen(fd,type)
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#if defined(__BORLANDC__) && !defined(MSDOS)
|
||||
#pragma warn -8004
|
||||
#pragma warn -8008
|
||||
#pragma warn -8066
|
||||
#endif
|
||||
|
||||
/* provide prototypes for these when building zlib without LFS */
|
||||
#if !defined(_WIN32) && \
|
||||
(!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
|
||||
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
|
||||
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
|
||||
#endif
|
||||
|
||||
/* common defaults */
|
||||
|
||||
#ifndef OS_CODE
|
||||
# define OS_CODE 3 /* assume Unix */
|
||||
#endif
|
||||
|
||||
#ifndef F_OPEN
|
||||
# define F_OPEN(name, mode) fopen((name), (mode))
|
||||
#endif
|
||||
|
||||
/* functions */
|
||||
|
||||
#if defined(pyr) || defined(Z_SOLO)
|
||||
# define NO_MEMCPY
|
||||
#endif
|
||||
#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
|
||||
/* Use our own functions for small and medium model with MSC <= 5.0.
|
||||
* You may have to use the same strategy for Borland C (untested).
|
||||
* The __SC__ check is for Symantec.
|
||||
*/
|
||||
# define NO_MEMCPY
|
||||
#endif
|
||||
#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
|
||||
# define HAVE_MEMCPY
|
||||
#endif
|
||||
#ifdef HAVE_MEMCPY
|
||||
# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
|
||||
# define zmemcpy _fmemcpy
|
||||
# define zmemcmp _fmemcmp
|
||||
# define zmemzero(dest, len) _fmemset(dest, 0, len)
|
||||
# else
|
||||
# define zmemcpy memcpy
|
||||
# define zmemcmp memcmp
|
||||
# define zmemzero(dest, len) memset(dest, 0, len)
|
||||
# endif
|
||||
#else
|
||||
void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
|
||||
int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
|
||||
void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
|
||||
#endif
|
||||
|
||||
/* Diagnostic functions */
|
||||
#ifdef ZLIB_DEBUG
|
||||
# include <stdio.h>
|
||||
extern int ZLIB_INTERNAL z_verbose;
|
||||
extern void ZLIB_INTERNAL z_error OF((char *m));
|
||||
# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
|
||||
# define Trace(x) {if (z_verbose>=0) fprintf x ;}
|
||||
# define Tracev(x) {if (z_verbose>0) fprintf x ;}
|
||||
# define Tracevv(x) {if (z_verbose>1) fprintf x ;}
|
||||
# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
|
||||
# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
|
||||
#else
|
||||
# define Assert(cond,msg)
|
||||
# define Trace(x)
|
||||
# define Tracev(x)
|
||||
# define Tracevv(x)
|
||||
# define Tracec(c,x)
|
||||
# define Tracecv(c,x)
|
||||
#endif
|
||||
|
||||
#ifndef Z_SOLO
|
||||
voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
|
||||
unsigned size));
|
||||
void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
|
||||
#endif
|
||||
|
||||
#define ZALLOC(strm, items, size) \
|
||||
(*((strm)->zalloc))((strm)->opaque, (items), (size))
|
||||
#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
|
||||
#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
|
||||
|
||||
/* Reverse the bytes in a 32-bit value */
|
||||
#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
|
||||
(((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
|
||||
|
||||
#endif /* ZUTIL_H */
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
|
||||
# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-3-Clause
|
||||
#
|
||||
|
|
@ -98,75 +98,90 @@ define IMG_BIN
|
|||
${BUILD_PLAT}/bl$(1).bin
|
||||
endef
|
||||
|
||||
# FIP_ADD_PAYLOAD appends the command line arguments required by fiptool
|
||||
# to package a new payload. Optionally, it adds the dependency on this payload
|
||||
# TOOL_ADD_PAYLOAD appends the command line arguments required by fiptool to
|
||||
# package a new payload and/or by cert_create to generate certificate.
|
||||
# Optionally, it adds the dependency on this payload
|
||||
# $(1) = payload filename (i.e. bl31.bin)
|
||||
# $(2) = command line option for the specified payload (i.e. --soc-fw)
|
||||
# $(3) = fip target dependency (optional) (i.e. bl31)
|
||||
define FIP_ADD_PAYLOAD
|
||||
$(eval FIP_ARGS += $(2) $(1))
|
||||
$(eval $(if $(3),FIP_DEPS += $(3)))
|
||||
# $(3) = tool target dependency (optional) (ex. build/fvp/release/bl31.bin)
|
||||
# $(4) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
|
||||
define TOOL_ADD_PAYLOAD
|
||||
$(4)FIP_ARGS += $(2) $(1)
|
||||
$(if $(3),$(4)FIP_DEPS += $(3))
|
||||
$(4)CRT_ARGS += $(2) $(1)
|
||||
$(if $(3),$(4)CRT_DEPS += $(3))
|
||||
endef
|
||||
|
||||
# TOOL_ADD_IMG_PAYLOAD works like TOOL_ADD_PAYLOAD, but applies image filters
|
||||
# before passing them to host tools if BL*_PRE_TOOL_FILTER is defined.
|
||||
# $(1) = image_type (scp_bl2, bl33, etc.)
|
||||
# $(2) = payload filepath (ex. build/fvp/release/bl31.bin)
|
||||
# $(3) = command line option for the specified payload (ex. --soc-fw)
|
||||
# $(4) = tool target dependency (optional) (ex. build/fvp/release/bl31.bin)
|
||||
# $(5) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
|
||||
|
||||
define TOOL_ADD_IMG_PAYLOAD
|
||||
|
||||
$(eval PRE_TOOL_FILTER := $($(call uppercase,$(1))_PRE_TOOL_FILTER))
|
||||
|
||||
ifneq ($(PRE_TOOL_FILTER),)
|
||||
|
||||
$(eval PROCESSED_PATH := $(BUILD_PLAT)/$(1).bin$($(PRE_TOOL_FILTER)_SUFFIX))
|
||||
|
||||
$(call $(PRE_TOOL_FILTER)_RULE,$(PROCESSED_PATH),$(2))
|
||||
|
||||
$(PROCESSED_PATH): $(4)
|
||||
|
||||
$(call TOOL_ADD_PAYLOAD,$(PROCESSED_PATH),$(3),$(PROCESSED_PATH),$(5))
|
||||
|
||||
else
|
||||
$(call TOOL_ADD_PAYLOAD,$(2),$(3),$(4),$(5))
|
||||
endif
|
||||
endef
|
||||
|
||||
# CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation
|
||||
# $(1) = parameter filename
|
||||
# $(2) = cert_create command line option for the specified parameter
|
||||
# $(3) = input parameter (false if empty)
|
||||
# $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
|
||||
define CERT_ADD_CMD_OPT
|
||||
$(eval $(if $(3),CRT_DEPS += $(1)))
|
||||
$(eval CRT_ARGS += $(2) $(1))
|
||||
$(3)CRT_ARGS += $(2) $(1)
|
||||
endef
|
||||
|
||||
# FIP_ADD_IMG allows the platform to specify an image to be packed in the FIP
|
||||
# using a build option. It also adds a dependency on the image file, aborting
|
||||
# the build if the file does not exist.
|
||||
# $(1) = build option to specify the image filename (SCP_BL2, BL33, etc)
|
||||
# TOOL_ADD_IMG allows the platform to specify an external image to be packed
|
||||
# in the FIP and/or for which certificate is generated. It also adds a
|
||||
# dependency on the image file, aborting the build if the file does not exist.
|
||||
# $(1) = image_type (scp_bl2, bl33, etc.)
|
||||
# $(2) = command line option for fiptool (--scp-fw, --nt-fw, etc)
|
||||
# $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
|
||||
# Example:
|
||||
# $(eval $(call FIP_ADD_IMG,BL33,--nt-fw))
|
||||
define FIP_ADD_IMG
|
||||
CRT_DEPS += check_$(1)
|
||||
FIP_DEPS += check_$(1)
|
||||
$(call FIP_ADD_PAYLOAD,$(value $(1)),$(2))
|
||||
# $(eval $(call TOOL_ADD_IMG,bl33,--nt-fw))
|
||||
define TOOL_ADD_IMG
|
||||
# Build option to specify the image filename (SCP_BL2, BL33, etc)
|
||||
# This is the uppercase form of the first parameter
|
||||
$(eval _V := $(call uppercase,$(1)))
|
||||
|
||||
$(3)CRT_DEPS += check_$(1)
|
||||
$(3)FIP_DEPS += check_$(1)
|
||||
$(call TOOL_ADD_IMG_PAYLOAD,$(1),$(value $(_V)),$(2),,$(3))
|
||||
|
||||
.PHONY: check_$(1)
|
||||
check_$(1):
|
||||
$$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
|
||||
$$(if $(value $(_V)),,$$(error "Platform '${PLAT}' requires $(_V). Please set $(_V) to point to the right file"))
|
||||
$$(if $(wildcard $(value $(_V))),,$$(error '$(_V)=$(value $(_V))' was specified, but '$(value $(_V))' does not exist))
|
||||
endef
|
||||
|
||||
# FWU_FIP_ADD_PAYLOAD appends the command line arguments required by fiptool
|
||||
# to package a new FWU payload. Optionally, it adds the dependency on this payload
|
||||
# $(1) = payload filename (e.g. ns_bl2u.bin)
|
||||
# $(2) = command line option for the specified payload (e.g. --fwu)
|
||||
# $(3) = fip target dependency (optional) (e.g. ns_bl2u)
|
||||
define FWU_FIP_ADD_PAYLOAD
|
||||
$(eval $(if $(3),FWU_FIP_DEPS += $(3)))
|
||||
$(eval FWU_FIP_ARGS += $(2) $(1))
|
||||
################################################################################
|
||||
# Generic image processing filters
|
||||
################################################################################
|
||||
|
||||
# GZIP
|
||||
define GZIP_RULE
|
||||
$(1): $(2)
|
||||
@echo " GZIP $$@"
|
||||
$(Q)gzip -n -f -9 $$< --stdout > $$@
|
||||
endef
|
||||
|
||||
# FWU_CERT_ADD_CMD_OPT adds a new command line option to the cert_create invocation
|
||||
# $(1) = parameter filename
|
||||
# $(2) = cert_create command line option for the specified parameter
|
||||
# $(3) = input parameter (false if empty)
|
||||
define FWU_CERT_ADD_CMD_OPT
|
||||
$(eval $(if $(3),FWU_CRT_DEPS += $(1)))
|
||||
$(eval FWU_CRT_ARGS += $(2) $(1))
|
||||
endef
|
||||
|
||||
# FWU_FIP_ADD_IMG allows the platform to pack a binary image in the FWU FIP
|
||||
# $(1) build option to specify the image filename (BL2U, NS_BL2U, etc)
|
||||
# $(2) command line option for fiptool (--ap-fwu-cfg, --fwu, etc)
|
||||
# Example:
|
||||
# $(eval $(call FWU_FIP_ADD_IMG,BL2U,--ap-fwu-cfg))
|
||||
define FWU_FIP_ADD_IMG
|
||||
FWU_CRT_DEPS += check_$(1)
|
||||
FWU_FIP_DEPS += check_$(1)
|
||||
$(call FWU_FIP_ADD_PAYLOAD,$(value $(1)),$(2))
|
||||
|
||||
.PHONY: check_$(1)
|
||||
check_$(1):
|
||||
$$(if $(value $(1)),,$$(error "Platform '${PLAT}' requires $(1). Please set $(1) to point to the right file"))
|
||||
endef
|
||||
GZIP_SUFFIX := .gz
|
||||
|
||||
################################################################################
|
||||
# Auxiliary macros to build TF images from sources
|
||||
|
|
@ -254,16 +269,6 @@ define SOURCES_TO_OBJS
|
|||
$(notdir $(patsubst %.S,%.o,$(filter %.S,$(1))))
|
||||
endef
|
||||
|
||||
|
||||
# MAKE_TOOL_ARGS macro defines the command line arguments for fiptool for
|
||||
# each BL image. Arguments:
|
||||
# $(1) = BL stage (2, 30, 31, 32, 33)
|
||||
# $(2) = Binary file
|
||||
# $(3) = FIP command line option (if empty, image will not be included in the FIP)
|
||||
define MAKE_TOOL_ARGS
|
||||
$(if $(3),$(eval $(call FIP_ADD_PAYLOAD,$(2),--$(3),bl$(1))))
|
||||
endef
|
||||
|
||||
# Allow overriding the timestamp, for example for reproducible builds, or to
|
||||
# synchronize timestamps across multiple projects.
|
||||
# This must be set to a C string (including quotes where applicable).
|
||||
|
|
@ -273,6 +278,7 @@ BUILD_MESSAGE_TIMESTAMP ?= __TIME__", "__DATE__
|
|||
# Arguments:
|
||||
# $(1) = BL stage (2, 2u, 30, 31, 32, 33)
|
||||
# $(2) = FIP command line option (if empty, image will not be included in the FIP)
|
||||
# $(3) = FIP prefix (optional) (if FWU_, target is fwu_fip instead of fip)
|
||||
define MAKE_BL
|
||||
$(eval BUILD_DIR := ${BUILD_PLAT}/bl$(1))
|
||||
$(eval BL_SOURCES := $(BL$(call uppercase,$(1))_SOURCES))
|
||||
|
|
@ -334,7 +340,7 @@ bl$(1): $(BIN) $(DUMP)
|
|||
|
||||
all: bl$(1)
|
||||
|
||||
$(eval $(call MAKE_TOOL_ARGS,$(1),$(BIN),$(2)))
|
||||
$(if $(2),$(call TOOL_ADD_IMG_PAYLOAD,bl$(1),$(BIN),--$(2),$(BIN),$(3)))
|
||||
|
||||
endef
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
|
||||
# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-3-Clause
|
||||
#
|
||||
|
|
@ -43,12 +43,10 @@ $(eval $(call CERT_ADD_CMD_OPT,${TFW_NVCTR_VAL},--tfw-nvctr))
|
|||
$(eval $(call CERT_ADD_CMD_OPT,${NTFW_NVCTR_VAL},--ntfw-nvctr))
|
||||
|
||||
# Add Trusted Key certificate to the fiptool and cert_create command line options
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${TRUSTED_KEY_CERT},--trusted-key-cert))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${TRUSTED_KEY_CERT},--trusted-key-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${TRUSTED_KEY_CERT},--trusted-key-cert))
|
||||
|
||||
# Add fwu certificate to the fiptool and cert_create command line options
|
||||
$(eval $(call FWU_FIP_ADD_PAYLOAD,${FWU_CERT},--fwu-cert))
|
||||
$(eval $(call FWU_CERT_ADD_CMD_OPT,${FWU_CERT},--fwu-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${FWU_CERT},--fwu-cert,,FWU_))
|
||||
|
||||
# Add the keys to the cert_create command line options (private keys are NOT
|
||||
# packed in the FIP). Developers can use their own keys by specifying the proper
|
||||
|
|
@ -56,78 +54,42 @@ $(eval $(call FWU_CERT_ADD_CMD_OPT,${FWU_CERT},--fwu-cert))
|
|||
$(if ${KEY_ALG},$(eval $(call CERT_ADD_CMD_OPT,${KEY_ALG},--key-alg)))
|
||||
$(if ${HASH_ALG},$(eval $(call CERT_ADD_CMD_OPT,${HASH_ALG},--hash-alg)))
|
||||
$(if ${ROT_KEY},$(eval $(call CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key)))
|
||||
$(if ${ROT_KEY},$(eval $(call FWU_CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key)))
|
||||
$(if ${ROT_KEY},$(eval $(call CERT_ADD_CMD_OPT,${ROT_KEY},--rot-key,FWU_)))
|
||||
$(if ${TRUSTED_WORLD_KEY},$(eval $(call CERT_ADD_CMD_OPT,${TRUSTED_WORLD_KEY},--trusted-world-key)))
|
||||
$(if ${NON_TRUSTED_WORLD_KEY},$(eval $(call CERT_ADD_CMD_OPT,${NON_TRUSTED_WORLD_KEY},--non-trusted-world-key)))
|
||||
|
||||
# Add the BL2 CoT (image cert + image)
|
||||
$(if ${BL2},$(eval $(call CERT_ADD_CMD_OPT,${BL2},--tb-fw,true)),\
|
||||
$(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,2),--tb-fw,true)))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
|
||||
|
||||
# Add the BL2 CoT (image cert)
|
||||
ifeq (${BL2_AT_EL3}, 0)
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tb_fw.crt,--tb-fw-cert))
|
||||
endif
|
||||
|
||||
# Add the SCP_BL2 CoT (key cert + img cert + image)
|
||||
# Add the SCP_BL2 CoT (key cert + img cert)
|
||||
ifneq (${SCP_BL2},)
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${SCP_BL2},--scp-fw,true))
|
||||
$(if ${SCP_BL2_KEY},$(eval $(call CERT_ADD_CMD_OPT,${SCP_BL2_KEY},--scp-fw-key)))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_content.crt,--scp-fw-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/scp_fw_key.crt,--scp-fw-key-cert))
|
||||
endif
|
||||
|
||||
ifeq (${ARCH},aarch64)
|
||||
ifeq (${NEED_BL31},yes)
|
||||
# Add the BL31 CoT (key cert + img cert + image)
|
||||
$(if ${BL31},$(eval $(call CERT_ADD_CMD_OPT,${BL31},--soc-fw,true)),\
|
||||
$(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,31),--soc-fw,true)))
|
||||
# Add the BL31 CoT (key cert + img cert)
|
||||
$(if ${BL31_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL31_KEY},--soc-fw-key)))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_content.crt,--soc-fw-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/soc_fw_key.crt,--soc-fw-key-cert))
|
||||
endif
|
||||
endif
|
||||
|
||||
# Add the BL32 CoT (key cert + img cert + image)
|
||||
# Add the BL32 CoT (key cert + img cert)
|
||||
ifeq (${NEED_BL32},yes)
|
||||
$(if ${BL32},$(eval $(call CERT_ADD_CMD_OPT,${BL32},--tos-fw,true)),\
|
||||
$(if ${BL32_SOURCES},$(eval $(call CERT_ADD_CMD_OPT,$(call IMG_BIN,32),--tos-fw,true))))
|
||||
$(if ${BL32_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL32_KEY},--tos-fw-key)))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
|
||||
ifneq (${BL32_EXTRA1},)
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BL32_EXTRA1},--tos-fw-extra1,true))
|
||||
endif
|
||||
ifneq (${BL32_EXTRA2},)
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BL32_EXTRA2},--tos-fw-extra2,true))
|
||||
endif
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_content.crt,--tos-fw-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/tos_fw_key.crt,--tos-fw-key-cert))
|
||||
endif
|
||||
|
||||
# Add the BL33 CoT (key cert + img cert + image)
|
||||
# Add the BL33 CoT (key cert + img cert)
|
||||
ifneq (${BL33},)
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BL33},--nt-fw,true))
|
||||
$(if ${BL33_KEY},$(eval $(call CERT_ADD_CMD_OPT,${BL33_KEY},--nt-fw-key)))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
|
||||
$(eval $(call CERT_ADD_CMD_OPT,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
|
||||
$(eval $(call FIP_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
|
||||
endif
|
||||
|
||||
# Add the BL2U image
|
||||
$(if ${BL2U},$(eval $(call FWU_CERT_ADD_CMD_OPT,${BL2U},--ap-fwu-cfg,true)),\
|
||||
$(eval $(call FWU_CERT_ADD_CMD_OPT,$(call IMG_BIN,2u),--ap-fwu-cfg,true)))
|
||||
|
||||
# Add the SCP_BL2U image
|
||||
ifneq (${SCP_BL2U},)
|
||||
$(eval $(call FWU_CERT_ADD_CMD_OPT,${SCP_BL2U},--scp-fwu-cfg,true))
|
||||
endif
|
||||
|
||||
# Add the NS_BL2U image
|
||||
ifneq (${NS_BL2U},)
|
||||
$(eval $(call FWU_CERT_ADD_CMD_OPT,${NS_BL2U},--fwu,true))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_content.crt,--nt-fw-cert))
|
||||
$(eval $(call TOOL_ADD_PAYLOAD,${BUILD_PLAT}/nt_fw_key.crt,--nt-fw-key-cert))
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
|
||||
# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-3-Clause
|
||||
#
|
||||
|
|
@ -87,10 +87,10 @@ $(eval $(call add_define,MBEDTLS_SHA256_SMALLER))
|
|||
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
|
||||
# in the FIP if the platform requires.
|
||||
ifneq ($(BL32_EXTRA1),)
|
||||
$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
|
||||
$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
|
||||
endif
|
||||
ifneq ($(BL32_EXTRA2),)
|
||||
$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
|
||||
$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
|
||||
endif
|
||||
|
||||
# Enable PSCI_STAT_COUNT/RESIDENCY APIs on ARM platforms
|
||||
|
|
@ -211,7 +211,7 @@ ifneq (${TRUSTED_BOARD_BOOT},0)
|
|||
BL2_SOURCES += ${AUTH_SOURCES} \
|
||||
plat/common/tbbr/plat_tbbr.c
|
||||
|
||||
$(eval $(call FWU_FIP_ADD_IMG,NS_BL2U,--fwu))
|
||||
$(eval $(call TOOL_ADD_IMG,ns_bl2u,--fwu,FWU_))
|
||||
|
||||
# We expect to locate the *.mk files under the directories specified below
|
||||
ifeq (${ARM_CRYPTOCELL_INTEG},0)
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
|
||||
# Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-3-Clause
|
||||
#
|
||||
|
|
@ -49,7 +49,7 @@ $(eval $(call add_define,CSS_LOAD_SCP_IMAGES))
|
|||
ifeq (${CSS_LOAD_SCP_IMAGES},1)
|
||||
NEED_SCP_BL2 := yes
|
||||
ifneq (${TRUSTED_BOARD_BOOT},0)
|
||||
$(eval $(call FWU_FIP_ADD_IMG,SCP_BL2U,--scp-fwu-cfg))
|
||||
$(eval $(call TOOL_ADD_IMG,scp_bl2u,--scp-fwu-cfg,FWU_))
|
||||
endif
|
||||
|
||||
ifeq (${CSS_USE_SCMI_SDS_DRIVER},1)
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
|
||||
* Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
|
@ -15,10 +15,7 @@
|
|||
.weak plat_disable_acp
|
||||
.weak bl1_plat_prepare_exit
|
||||
.weak platform_mem_init
|
||||
.weak plat_error_handler
|
||||
.weak plat_panic_handler
|
||||
.weak bl2_plat_preload_setup
|
||||
.weak plat_try_next_boot_source
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* Placeholder function which should be redefined by
|
||||
|
|
@ -94,16 +91,6 @@ func bl1_plat_prepare_exit
|
|||
bx lr
|
||||
endfunc bl1_plat_prepare_exit
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* void plat_error_handler(int err) __dead2;
|
||||
* Endless loop by default.
|
||||
* -----------------------------------------------------
|
||||
*/
|
||||
func plat_error_handler
|
||||
wfi
|
||||
b plat_error_handler
|
||||
endfunc plat_error_handler
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* void plat_panic_handler(void) __dead2;
|
||||
* Endless loop by default.
|
||||
|
|
@ -112,23 +99,3 @@ endfunc plat_error_handler
|
|||
func plat_panic_handler
|
||||
b plat_panic_handler
|
||||
endfunc plat_panic_handler
|
||||
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* Placeholder function which should be redefined by
|
||||
* each platfrom.
|
||||
* -----------------------------------------------------
|
||||
*/
|
||||
func bl2_plat_preload_setup
|
||||
bx lr
|
||||
endfunc bl2_plat_preload_setup
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* Placeholder function which should be redefined by
|
||||
* each platfrom.
|
||||
* -----------------------------------------------------
|
||||
*/
|
||||
func plat_try_next_boot_source
|
||||
mov r0, #0
|
||||
bx lr
|
||||
endfunc plat_try_next_boot_source
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
|
||||
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
|
@ -16,10 +16,7 @@
|
|||
.weak plat_reset_handler
|
||||
.weak plat_disable_acp
|
||||
.weak bl1_plat_prepare_exit
|
||||
.weak plat_error_handler
|
||||
.weak plat_panic_handler
|
||||
.weak bl2_plat_preload_setup
|
||||
.weak plat_try_next_boot_source
|
||||
|
||||
#if !ENABLE_PLAT_COMPAT
|
||||
.globl platform_get_core_pos
|
||||
|
|
@ -158,16 +155,6 @@ func bl1_plat_prepare_exit
|
|||
ret
|
||||
endfunc bl1_plat_prepare_exit
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* void plat_error_handler(int err) __dead2;
|
||||
* Endless loop by default.
|
||||
* -----------------------------------------------------
|
||||
*/
|
||||
func plat_error_handler
|
||||
wfi
|
||||
b plat_error_handler
|
||||
endfunc plat_error_handler
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* void plat_panic_handler(void) __dead2;
|
||||
* Endless loop by default.
|
||||
|
|
@ -177,22 +164,3 @@ func plat_panic_handler
|
|||
wfi
|
||||
b plat_panic_handler
|
||||
endfunc plat_panic_handler
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* Placeholder function which should be redefined by
|
||||
* each platfrom.
|
||||
* -----------------------------------------------------
|
||||
*/
|
||||
func bl2_plat_preload_setup
|
||||
ret
|
||||
endfunc bl2_plat_preload_setup
|
||||
|
||||
/* -----------------------------------------------------
|
||||
* Placeholder function which should be redefined by
|
||||
* each platfrom.
|
||||
* -----------------------------------------------------
|
||||
*/
|
||||
func plat_try_next_boot_source
|
||||
mov x0, #0
|
||||
ret
|
||||
endfunc plat_try_next_boot_source
|
||||
|
|
|
|||
|
|
@ -0,0 +1,55 @@
|
|||
/*
|
||||
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
||||
#include <arch_helpers.h>
|
||||
#include <platform.h>
|
||||
|
||||
/*
|
||||
* Placeholder functions which can be redefined by each platfrom.
|
||||
*/
|
||||
|
||||
#pragma weak plat_error_handler
|
||||
#pragma weak bl1_plat_handle_pre_image_load
|
||||
#pragma weak bl1_plat_handle_post_image_load
|
||||
#pragma weak bl2_plat_preload_setup
|
||||
#pragma weak bl2_plat_handle_pre_image_load
|
||||
#pragma weak bl2_plat_handle_post_image_load
|
||||
#pragma weak plat_try_next_boot_source
|
||||
|
||||
void __dead2 plat_error_handler(int err)
|
||||
{
|
||||
while (1)
|
||||
wfi();
|
||||
}
|
||||
|
||||
int bl1_plat_handle_pre_image_load(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int bl1_plat_handle_post_image_load(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
void bl2_plat_preload_setup(void)
|
||||
{
|
||||
}
|
||||
|
||||
int bl2_plat_handle_pre_image_load(unsigned int image_id)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int bl2_plat_handle_post_image_load(unsigned int image_id)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int plat_try_next_boot_source(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
|
||||
# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-3-Clause
|
||||
#
|
||||
|
|
@ -36,10 +36,10 @@ $(eval $(call add_define,PLAT_PARTITION_MAX_ENTRIES))
|
|||
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
|
||||
# in the FIP if the platform requires.
|
||||
ifneq ($(BL32_EXTRA1),)
|
||||
$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
|
||||
$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
|
||||
endif
|
||||
ifneq ($(BL32_EXTRA2),)
|
||||
$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
|
||||
$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
|
||||
endif
|
||||
|
||||
ENABLE_PLAT_COMPAT := 0
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
|
||||
# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-3-Clause
|
||||
#
|
||||
|
|
@ -29,10 +29,10 @@ $(eval $(call add_define,CRASH_CONSOLE_BASE))
|
|||
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
|
||||
# in the FIP if the platform requires.
|
||||
ifneq ($(BL32_EXTRA1),)
|
||||
$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
|
||||
$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
|
||||
endif
|
||||
ifneq ($(BL32_EXTRA2),)
|
||||
$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
|
||||
$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
|
||||
endif
|
||||
|
||||
ENABLE_PLAT_COMPAT := 0
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
#
|
||||
# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
|
||||
# Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
|
||||
#
|
||||
# SPDX-License-Identifier: BSD-3-Clause
|
||||
#
|
||||
|
|
@ -133,10 +133,10 @@ BL31_SOURCES += lib/cpus/aarch64/aem_generic.S \
|
|||
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
|
||||
# in the FIP if the platform requires.
|
||||
ifneq ($(BL32_EXTRA1),)
|
||||
$(eval $(call FIP_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
|
||||
$(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
|
||||
endif
|
||||
ifneq ($(BL32_EXTRA2),)
|
||||
$(eval $(call FIP_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
|
||||
$(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
|
||||
endif
|
||||
|
||||
# Disable the PSCI platform compatibility layer
|
||||
|
|
|
|||
|
|
@ -103,6 +103,23 @@ $(ROTPK_HASH): $(ROT_KEY)
|
|||
|
||||
endif
|
||||
|
||||
ifeq (${FIP_GZIP},1)
|
||||
|
||||
include lib/zlib/zlib.mk
|
||||
|
||||
BL2_SOURCES += common/image_decompress.c \
|
||||
$(ZLIB_SOURCES)
|
||||
|
||||
$(eval $(call add_define,UNIPHIER_DECOMPRESS_GZIP))
|
||||
|
||||
# compress all images loaded by BL2
|
||||
SCP_BL2_PRE_TOOL_FILTER := GZIP
|
||||
BL31_PRE_TOOL_FILTER := GZIP
|
||||
BL32_PRE_TOOL_FILTER := GZIP
|
||||
BL33_PRE_TOOL_FILTER := GZIP
|
||||
|
||||
endif
|
||||
|
||||
.PHONY: bl2_gzip
|
||||
bl2_gzip: $(BUILD_PLAT)/bl2.bin.gz
|
||||
%.gz: %
|
||||
|
|
|
|||
|
|
@ -42,7 +42,9 @@ int uniphier_usb_init(unsigned int soc, uintptr_t *block_dev_spec);
|
|||
|
||||
int uniphier_io_setup(unsigned int soc);
|
||||
int uniphier_check_image(unsigned int image_id);
|
||||
void uniphier_image_descs_fixup(void);
|
||||
|
||||
struct image_info;
|
||||
struct image_info *uniphier_get_image_info(unsigned int image_id);
|
||||
|
||||
int uniphier_scp_is_running(void);
|
||||
void uniphier_scp_start(void);
|
||||
|
|
@ -80,7 +82,11 @@ unsigned int uniphier_calc_core_pos(u_register_t mpidr);
|
|||
|
||||
#define UNIPHIER_BLOCK_BUF_BASE ((UNIPHIER_SCP_BASE) + \
|
||||
(UNIPHIER_SCP_MAX_SIZE))
|
||||
#define UNIPHIER_BLOCK_BUF_SIZE ((UNIPHIER_NS_DRAM_LIMIT) - \
|
||||
(UNIPHIER_BLOCK_BUF_BASE))
|
||||
#define UNIPHIER_BLOCK_BUF_SIZE 0x00100000
|
||||
|
||||
#define UNIPHIER_IMAGE_BUF_BASE ((UNIPHIER_BLOCK_BUF_BASE) + \
|
||||
(UNIPHIER_BLOCK_BUF_SIZE))
|
||||
#define UNIPHIER_IMAGE_BUF_SIZE ((UNIPHIER_NS_DRAM_LIMIT) - \
|
||||
(UNIPHIER_IMAGE_BUF_BASE))
|
||||
|
||||
#endif /* __UNIPHIER_H__ */
|
||||
|
|
|
|||
|
|
@ -9,8 +9,12 @@
|
|||
#include <desc_image_load.h>
|
||||
#include <errno.h>
|
||||
#include <io/io_storage.h>
|
||||
#include <image_decompress.h>
|
||||
#include <platform.h>
|
||||
#include <platform_def.h>
|
||||
#ifdef UNIPHIER_DECOMPRESS_GZIP
|
||||
#include <tf_gunzip.h>
|
||||
#endif
|
||||
#include <xlat_tables_v2.h>
|
||||
|
||||
#include "uniphier.h"
|
||||
|
|
@ -93,8 +97,12 @@ void bl2_el3_plat_arch_setup(void)
|
|||
}
|
||||
}
|
||||
|
||||
if (skip_scp)
|
||||
uniphier_image_descs_fixup();
|
||||
if (skip_scp) {
|
||||
struct image_info *image_info;
|
||||
|
||||
image_info = uniphier_get_image_info(SCP_BL2_IMAGE_ID);
|
||||
image_info->h.attr |= IMAGE_ATTRIB_SKIP_LOADING;
|
||||
}
|
||||
}
|
||||
|
||||
void bl2_platform_setup(void)
|
||||
|
|
@ -116,8 +124,38 @@ bl_params_t *plat_get_next_bl_params(void)
|
|||
return get_next_bl_params_from_mem_params_desc();
|
||||
}
|
||||
|
||||
void bl2_plat_preload_setup(void)
|
||||
{
|
||||
#ifdef UNIPHIER_DECOMPRESS_GZIP
|
||||
image_decompress_init(UNIPHIER_IMAGE_BUF_BASE,
|
||||
UNIPHIER_IMAGE_BUF_SIZE,
|
||||
gunzip);
|
||||
#endif
|
||||
}
|
||||
|
||||
int bl2_plat_handle_pre_image_load(unsigned int image_id)
|
||||
{
|
||||
#ifdef UNIPHIER_DECOMPRESS_GZIP
|
||||
image_decompress_prepare(uniphier_get_image_info(image_id));
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
int bl2_plat_handle_post_image_load(unsigned int image_id)
|
||||
{
|
||||
#ifdef UNIPHIER_DECOMPRESS_GZIP
|
||||
struct image_info *image_info;
|
||||
int ret;
|
||||
|
||||
image_info = uniphier_get_image_info(image_id);
|
||||
|
||||
if (!(image_info->h.attr & IMAGE_ATTRIB_SKIP_LOADING)) {
|
||||
ret = image_decompress(uniphier_get_image_info(image_id));
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
#endif
|
||||
|
||||
if (image_id == SCP_BL2_IMAGE_ID && uniphier_bl2_kick_scp)
|
||||
uniphier_scp_start();
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
|
||||
* Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*/
|
||||
|
|
@ -86,12 +86,11 @@ static struct bl_mem_params_node uniphier_image_descs[] = {
|
|||
};
|
||||
REGISTER_BL_IMAGE_DESCS(uniphier_image_descs)
|
||||
|
||||
/* SCP is optional. Allow run-time fixup of the descriptor array. */
|
||||
void uniphier_image_descs_fixup(void)
|
||||
struct image_info *uniphier_get_image_info(unsigned int image_id)
|
||||
{
|
||||
struct bl_mem_params_node *desc;
|
||||
|
||||
desc = get_bl_mem_params_node(SCP_BL2_IMAGE_ID);
|
||||
assert(desc != NULL);
|
||||
desc->image_info.h.attr |= IMAGE_ATTRIB_SKIP_LOADING;
|
||||
desc = get_bl_mem_params_node(image_id);
|
||||
assert(desc);
|
||||
return &desc->image_info;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue