Use long instead of long long on aarch64 for 64_t stdint types.
Introduce inttypes.h to properly support printf format specifiers for
fixed width types for such change.
Change-Id: I0bca594687a996fde0a9702d7a383055b99f10a1
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Assert condition:
1 Register secure timer(ppi=29) for sdei nmi watchdog;
2 kernel panic and then kdump;
While kdump, kernel mask all cores sdei, secure timer trigger
and go to handle_masked_trigger() and assert here:
assert(se->affinity == my_mpidr);
As kernel register with flag=0, mpidr=0 and TF-A set flag to
SDEI_REGF_RM_PE but leave mpidr=0. So set mpidr to fix his
assert issue.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: Ia9182f40bde94fb004b46e2a72b186eb0ef05166
SDEI specified event numbers in hexadecimal format.
Change event number format to hexadecimal to make
it easier for the reader to recognize the proper event.
Change-Id: Iac7a91d0910316e0ad54a8f09bc17209e8c6adf6
Signed-off-by: Vasyl Gomonovych <vgomonovych@marvell.com>
Consider a RAS scenario:
Enter EL3 by sync exception, then call spm_mm_sp_call() enter
EL0s to handle this error, then call sdei_dispatch_event() to
inform OS. Finally, return back to OS from sync exception flow.
Similar flow is sgi_ras_intr_handler() in sgi_ras.c.
The icc_pmr_el1 register will be change in above flow:
1 cm_el1_sysregs_context_save(NON_SECURE);
-> ehf_exited_normal_world();
##icc_pmr_el1: 0xf8 => 0x80
2 spm_mm_sp_call();
3 sdei_dispatch_event();
4 ehf_activate_priority(sdei_event_priority(map));
##icc_pmr_el1: 0x80 => 0x60
5 restore_and_resume_ns_context();
-> ehf_exited_normal_world();
##return due to has_valid_pri_activations(pe_data) == 1
6 ehf_deactivate_priority(sdei_event_priority(map));
##icc_pmr_el1: 0x60 => 0x80
The icc_pmr_el1 was rewrote from 0xf8 to 0x80. This issue will
result in OS hang when eret to OS from RAS flow.
Move ehf_activate_priority(sdei_event_priority(map)) after
restore_and_resume_ns_context() can fix this issue.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Change-Id: If01ec55cf0aabf1594dece1ad50d3ec3406cdabc
The SDEI specification now says that during an SDEI
event handler dispatch the SPSR should be set according
to the TakeException() pseudocode function defined in
the Arm Architecture Reference Manual. This patch sets
the SPSR according to the function given in
ARM DDI 0487F.c page J1-7635
Change-Id: Id2f8f2464fd69c701d81626162827e5c4449b658
Signed-off-by: Daniel Boulby <daniel.boulby@arm.com>
when updata routing of an SDEI event, if the registration flags
is SDEI_REGF_RM_PE, need to updata the affinity of shared event.
Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Change-Id: Ie5d7cc4199253f6af1c28b407f712caac3092d06
This patch introduces dynamic configuration for SDEI setup and is supported
when the new build flag SDEI_IN_FCONF is enabled. Instead of using C arrays
and processing the configuration at compile time, the config is moved to
dts files. It will be retrieved at runtime during SDEI init, using the fconf
layer.
Change-Id: If5c35a7517ba00a9f258d7f3e7c8c20cee169a31
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Co-authored-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
NOTE: AARCH32/AARCH64 macros are now deprecated in favor of __aarch64__.
All common C compilers pre-define the same macros to signal which
architecture the code is being compiled for: __arm__ for AArch32 (or
earlier versions) and __aarch64__ for AArch64. There's no need for TF-A
to define its own custom macros for this. In order to unify code with
the export headers (which use __aarch64__ to avoid another dependency),
let's deprecate the AARCH32 and AARCH64 macros and switch the code base
over to the pre-defined standard macro. (Since it is somewhat
unintuitive that __arm__ only means AArch32, let's standardize on only
using __aarch64__.)
Change-Id: Ic77de4b052297d77f38fc95f95f65a8ee70cf200
Signed-off-by: Julius Werner <jwerner@chromium.org>
Instead of having a custom implementation of setjmp() and longjmp() it
is better to follow the C standard.
The comments in setjmp.h are no longer needed as there are no deviations
from the expected one, so they have been removed.
All SDEI code that relied on them has been fixed to use the new function
prototypes and structs.
Change-Id: I6cd2e21cb5a5bcf81ba12283f2e4c067bd5172ca
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Corrects typos in core code, documentation files, drivers, Arm
platforms and services.
None of the corrections affect code; changes are limited to comments
and other documentation.
Change-Id: I5c1027b06ef149864f315ccc0ea473e2a16bfd1d
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Enforce full include path for includes. Deprecate old paths.
The following folders inside include/lib have been left unchanged:
- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}
The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).
For example, this patch had to be created because two headers were
called the same way: e0ea0928d5 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a2 ("drivers: add tzc380 support").
This problem was introduced in commit 4ecca33988 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.
Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.
Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Secure world execution nearly always expect a controlled exit to
Non-secure world. SDEI interrupts, although targets EL3, occur on behalf
of Non-secure world, and may have higher priority than Secure world
interrupts. Therefore they might preempt Secure execution, and yield
execution to Non-secure SDEI handler. Upon completion of SDEI event
handling (regardless of whether it's COPLETE or COMPLETE_AND_RESUME), we
must resume Secure execution if it was preempted.
Change-Id: I6edd991032588588427ba2fe6c3d7668f7080e3d
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This patch includes context.h from sdei_private.h to fix the
following compilation errors:
<snip>
In file included from services/std_svc/sdei/sdei_event.c:9:0:
services/std_svc/sdei/sdei_private.h: In function 'sdei_client_el':
services/std_svc/sdei/sdei_private.h:164:2: error: unknown type name 'cpu_context_t'
cpu_context_t *ns_ctx = cm_get_context(NON_SECURE);
^
services/std_svc/sdei/sdei_private.h:165:2: error: unknown type name 'el3_state_t'
el3_state_t *el3_ctx = get_el3state_ctx(ns_ctx);
^
services/std_svc/sdei/sdei_private.h:165:2: error: implicit declaration of function 'get_el3state_ctx' [-Werror=implicit-function-declaration]
services/std_svc/sdei/sdei_private.h:165:25: error: initialization makes pointer from integer without a cast [-Werror]
el3_state_t *el3_ctx = get_el3state_ctx(ns_ctx);
^
services/std_svc/sdei/sdei_private.h:167:2: error: implicit declaration of function 'read_ctx_reg' [-Werror=implicit-function-declaration]
return ((read_ctx_reg(el3_ctx, CTX_SCR_EL3) & SCR_HCE_BIT) != 0U) ?
^
services/std_svc/sdei/sdei_private.h:167:33: error: 'CTX_SCR_EL3' undeclared (first use in this function)
return ((read_ctx_reg(el3_ctx, CTX_SCR_EL3) & SCR_HCE_BIT) != 0U) ?
^
services/std_svc/sdei/sdei_private.h:167:33: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
<snip>
Change-Id: Id0cad56accf81b19cb0d301784f3f086dd052722
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
The specification requires that, after wakeup from a CPU suspend, the
dispatcher must mask all events on the CPU. This patch adds the feature
to the SDEI dispatcher by subscribing to the PSCI suspend to power down
event, and masking all events on the PE.
Change-Id: I9fe1d1bc2a58379ba7bba953a8d8b275fc18902c
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The codebase was using non-standard headers. It is needed to replace
them by the correct ones so that we can use the new libc headers.
Change-Id: I530f71d9510cb036e69fe79823c8230afe890b9d
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
The event lock for a shared event was being unlocked twice, and the
locking sequence for event complete was misplaced. This patch fixes both
issues.
Change-Id: Ie2fb15c6ec240af132d7d438946ca160bd5c63dc
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
These changes address most of the required MISRA rules. In the process,
some from generic code is also fixed.
No functional changes.
Change-Id: I6235a355e006f0b1c7c1c4d811b3964a64d0434f
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Fix mismatches between the format specifier and the corresponding
variable type.
Change-Id: Ib9004bd9baa9ba24a50000bea4f2418e1bf7e743
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
The function end_sdei_explicit_dispatch() was intended to be
end_sdei_synchronous_dispatch() which does the opposite of
begin_sdei_synchronous_dispatch(). This patch fixes that.
No functional changes.
Change-Id: I141bd91eb342ecf4ddfd05b49513eee4549e7a56
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
commit 2ccfcb2ea5 ("SDEI: Determine client
EL from NS context's SCR_EL3") intended to read from SCR_EL3, but
wrongly read from SPSR_EL3 instead. This patch fixes that.
Change-Id: I8ffea39cc98ef59cb8e7a4c6ef4cb12011c58536
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The Commit cdb6ac94ec introduced a bug
because of which the SDEI dispatcher wrongly panic when an SDEI event
dispatched earlier as a result of interrupt. This patch fixes the check
for a bound interrupt.
Change-Id: If55c8f0422ff781731248bbbc9c1b59fa0d3c4b0
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
SDEI event dispatches currently only sets up the Non-secure context
before returning to the caller. The actual dispatch only happens upon
exiting EL3 next time.
However, for various error handling scenarios, it's beneficial to have
the dispatch happen synchronously. I.e. when receiving SDEI interrupt,
or for a successful sdei_dispatch_event() call, the event handler is
executed; and upon the event completion, dispatcher execution resumes
after the point of dispatch. The jump primitives introduced in the
earlier patch facilitates this feature.
With this patch:
- SDEI interrupts and calls to sdei_dispatch_event prepares the NS
context for event dispatch, then sets a jump point, and immediately
exits EL3. This results in the client handler executing in
Non-secure.
- When the SDEI client completes the dispatched event, the SDEI
dispatcher does a longjmp to the jump pointer created earlier. For
the caller of the sdei_dispatch_event() in particular, this would
appear as if call returned successfully.
The dynamic workaround for CVE_2018_3639 is slightly shifted around as
part of related minor refactoring. It doesn't affect the workaround
functionality.
Documentation updated.
NOTE: This breaks the semantics of the explicit dispatch API, and any
exiting usages should be carefully reviewed.
Change-Id: Ib9c876d27ea2af7fb22de49832e55a0da83da3f9
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Currently, the dispatcher reads from SCR_EL3 register directly to
determine the EL of SDEI client. This is with the assumption that
SCR_EL3 is not modified throughout. However, with RAS work flows, it's
possible that SCR_EL3 register contains values corresponding to Secure
world, and therefore EL determination can go wrong. To mitigate this,
always read the register from the saved Non-secure context.
Change-Id: Ic85e4021deb18eb58757f676f9a001174998543a
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The current macros only allow to define dynamic and statically-bound
SDEI events. However, there ought be a mechanism to define SDEI events
that are explicitly dispatched; i.e., events that are dispatched as a
result of a previous secure interrupt or other exception
This patch introduces SDEI_EXPLICIT_EVENT() macro to define an explicit
event. They must be placed under private mappings. Only the priority
flags are allowed to be additionally specified.
Documentation updated.
Change-Id: I2e12f5571381195d6234c9dfbd5904608ad41db3
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
When dynamic mitigation is used, the SDEI handler is required to
execute with the mitigation enabled by default, regardless of the
mitigation state for lower ELs. This means that if the kernel or
hypervisor explicitly disables the mitigation and then later when the
event is dispatched, the dispatcher will remember the mitigation state
for the lower ELs but force the mitigation to be on during the SDEI
handler execution. When the SDEI handler returns, it will restore the
mitigation state.
This behaviour is described in "Firmware interfaces for mitigating
cache speculation vulnerabilities System Software on Arm Systems"[0].
[0] https://developer.arm.com/cache-speculation-vulnerability-firmware-specification
Change-Id: I8dd60b736be0aa9e832b0f92d67a401fdeb417f4
Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
Currently, when the client attempts to do SDEI_EVENT_COMPLETE or
SDEI_EVENT_COMPLETE_AND_RESUME, the dispatcher pops off the outstanding
dispatch context for sanity check. There are however other checks
following this, which could potentially return failure. If that happens,
by popping the context, the dispatcher has inadvertently discarded a
valid context.
This patch fixes this bug by inspecting (not actually popping) the
outstanding context. The context is popped only after all error checks
are completed.
Change-Id: Ie199f6442f871a8177a8247a0c646543bad76d21
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This fixes all defects according to MISRA Rule 3.1: "The character
sequences /* and // shall not be used within a comment". This affects
all URLs in comments, so they have been removed:
- The link in `sdei_state.c` can also be found in the documentation file
`docs/sdei.rst`.
- The bug that the file `io_fip.c` talks about doesn't affect the
currently supported version of GCC, so it doesn't make sense to keep
the comment. Note that the version of GCC officially supported is the
one that comes with Linaro Release 17.10, which is GCC 6.2.
- The link in `tzc400.c` was broken, and it didn't correctly direct to
the Technical Reference Manual it should. The link has been replaced
by the title of the document, which is more convenient when looking
for the document.
Change-Id: I89f60c25f635fd4c008a5d3a14028f814c147bbe
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
At present, both SDEI_PRIVATE_RESET and SDEI_SHARED_RESET returns
SDEI_PENDING if they fail to unregister an event. The SDEI specification
however requires that the APIs return SDEI_EDENY in these cases. This
patch fixes the return codes for the reset APIs.
Change-Id: Ic14484c91fa8396910387196c256d1ff13d03afd
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The SDEI specification requires that binding a client interrupt
dispatches SDEI Normal priority event. This means that dynamic events
can't have Critical priority. Add asserts for this.
Change-Id: I0bdd9e0e642fb2b61810cb9f4cbfbd35bba521d1
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
This allows for other EL3 components to schedule an SDEI event dispatch
to Normal world upon the next ERET. The API usage constrains are set out
in the SDEI dispatcher documentation.
Documentation to follow.
Change-Id: Id534bae0fd85afc94523490098c81f85c4e8f019
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
The implementation currently supports only interrupt-based SDEI events,
and supports all interfaces as defined by SDEI specification version
1.0 [1].
Introduce the build option SDEI_SUPPORT to include SDEI dispatcher in
BL31.
Update user guide and porting guide. SDEI documentation to follow.
[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0054a/ARM_DEN0054A_Software_Delegated_Exception_Interface.pdf
Change-Id: I758b733084e4ea3b27ac77d0259705565842241a
Co-authored-by: Yousuf A <yousuf.sait@arm.com>
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>
Manish Pandey
Scott Branden
Ming Huang
Vasyl Gomonovych
Daniel Boulby
Tony Xie
Balint Dobszay
Julius Werner
Antonio Nino Diaz
Paul Beesley
Jeenu Viswambharan
Varun Wadekar
Sandrine Bailleux
Dimitris Papastamos
Jonathan Wright