In iMX8MM it is possible to have two copies of bootloader in
SD/eMMC and switch between them. The switch is triggered either
by the BootROM in case the bootloader image is faulty OR can be
enforced by the user. To trigger that switch the
PERSIST_SECONDARY_BOOT bit should be set in GPR10 SRC register.
As the bit is retained after WARM reset, that permits to control
BootROM behavior regarding what boot image it will boot after
reset: primary or secondary.
This is useful for reliable bootloader A/B updates, as it permits
switching between two copies of bootloader at different offsets of
the same storage.
If the PERSIST_SECONDARY_BOOT is 0, the boot ROM uses address
0x8400 for the primary image. If the PERSIST_SECONDARY_BOOT is 1,
the boot ROM reads that secondary image table from address 0x8200
on the boot media and uses the address specified in the table for
the secondary image.
Secondary Image Table contains the sector of secondary bootloader
image, exluding the offset to that image (explained below in the
note). To generate the Secondary Image Table, use e.g.:
$ printf '\x0\x0\x0\x0\x0\x0\x0\x0\x33\x22\x11'
'\x00\x00\x10\x0\x0\x00\x0\x0\x0'
> /tmp/sit.bin
$ hexdump -vC /tmp/sit.bin
00000000 00 00 00 00
00000004 00 00 00 00
00000008 33 22 11 00 <--- This is the "tag"
0000000c 00 10 00 00 <--- This is the "firstSectorNumber"
00000010 00 00 00 00
You can also use NXP script from [1][2] imx-mkimage tool for
SIT generation. Note that the firstSectorNumber is NOT the offset
of the IVT, but an offset of the IVT decremented by Image Vector
Table offset (Table 6-25. Image Vector Table Offset and Initial
Load Region Size for iMX8MM/MQ), so for secondary SPL copy at
offset 0x1042 sectors, firstSectorNumber must be 0x1000
(0x42 sectors * 512 = 0x8400 bytes offset).
In order to test redundant boot board should be closed and
SD/MMC manufacture mode disabled, as secondary boot is not
supported in the SD/MMC manufacture mode, which can be disabled
by blowing DISABLE_SDMMC_MFG (example for iMX8MM):
> fuse prog -y 2 1 0x00800000
For additional details check i.MX 8M Mini Apllication Processor
Reference Manual, 6.1.5.4.5 Redundant boot support for
expansion device chapter.
[1] https://source.codeaurora.org/external/imx/imx-mkimage/
[2] scripts/gen_sit.sh
Change-Id: I0a5cea7295a4197f6c89183d74b4011cada52d4c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Implement IMX_SIP_AARCH32 to let AArch64 Bootloader could issue
SIP call to switch to AArch32 mode to run OS.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I38b04ef909a6dbfba5ded12a7bb6e799a3935a66
Platform defines are already provided by the build system so let's not
duplicate them.
Change-Id: Icf1ea76c3c3213e27b447c95e2b22b961fa7693e
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
The IMX_SIP_BUILDINFO call was implemented for imx8qm and imx8qx but
it's also applicable to imx8m.
This fixes U-Boot not printing commit hash on 8m with upstream TF-A.
Change-Id: Idcfd9729eaaccf329c24e241da325f1f6cd3c880
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Now it is needed to use the full path of the common header files.
Commit 09d40e0e08 ("Sanitise includes across codebase") provides more
information.
Change-Id: Ifedc79d9f664d208ba565f5736612a3edd94c647
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
This patch adds NXP i.MX8 SoCs' build info SIP support for easy debug.
With this function enabled, TF-A's commit hash can be showed in u-boot
debug console when booting up, when there is any issue which could be
related to TF-A, users can use the commit hash value to easily identify
which commit introduces the issue.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
For NXP's i.MX8 SoCs with system controller inside, thermal sensors
are maintained by SCFW, Linux needs to call SMC to trap to TF-A for
thermal alarm operation etc. by calling SCFW API.
This patch adds temperature alarm SIP service support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
For NXP's i.MX8 SoCs with system controller inside, OTP is
maintained by SCFW, Linux needs to call SMC to trap to TF-A
for OTP read/write etc. operations by calling SCFW API.
This patch adds OTP SIP service support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
On i.MX8QM/i.MX8QX with system controller inside, the wakeup
source is managed in SCFW(system controller firmware), if the
wakeup source is belonged to system controller partition, then
before Linux suspend, the wakeup source should be set to
SC_PM_WAKE_SRC_SCU, and if the wakeup source is belonged to
Cortex-A partition, the wakeup source should be set to
SC_PM_WAKE_SRC_IRQSTEER, so need to add wakeup source SIP runtime
service to get Linux kernel's wakeup source and set the correct
wakeup source for system controller.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
On i.MX8QM/i.MX8QX with system controller inside, the CPU's clock
rate is managed by SCFW(system controller firmware) and can ONLY be
changed from secure world, so SIP runtime service is needed for
setting CPU's clock rate, this patch adds cpu-freq SIP runtime service
support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
On i.MX8QM/i.MX8QX with system controller inside, the SRTC is
managed by SCFW(system controller firmware) and some functions
like setting SRTC's time etc. can ONLY be requested from secure
world, so SIP runtime service is needed for such kind of operations,
this patch adds SRTC SIP runtime service support for i.MX8QM and
i.MX8QX.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Igor Opaniuk
Peng Fan
Leonard Crestez
Ambroise Vincent
Anson Huang