Necessary infrastructure added to integrate fconf framework in BL31 & SP_MIN.
Created few populator() functions which parse HW_CONFIG device tree
and registered them with fconf framework. Many of the changes are
only applicable for fvp platform.
This patch:
1. Adds necessary symbols and sections in BL31, SP_MIN linker script
2. Adds necessary memory map entry for translation in BL31, SP_MIN
3. Creates an abstraction layer for hardware configuration based on
fconf framework
4. Adds necessary changes to build flow (makefiles)
5. Minimal callback to read hw_config dtb for capturing properties
related to GIC(interrupt-controller node)
6. updates the fconf documentation
Change-Id: Ib6292071f674ef093962b9e8ba0d322b7bf919af
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
Update qemu documentation with instructions to boot using FIP image.
Also, add option to build TF-A with TBBR and firmware encryption
enabled.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: Ib3af485d413cd595352034c82c2268d7f4cb120a
Add framework for autheticated decryption of data. Currently this
patch optionally imports mbedtls library as a backend if build option
"DECRYPTION_SUPPORT = aes_gcm" is set to perform authenticated decryption
using AES-GCM algorithm.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Change-Id: I2966f0e79033151012bf4ffc66f484cd949e7271
In commit 516beb585c ("TBB: apply TBBR naming
convention to certificates and extensions"), some of the variables used in the
TBBR chain of trust got renamed but the documentation did not get properly
updated everywhere to reflect these changes.
Change-Id: Ie8e2146882c2d3538c5b8c968d1bdaf5ea2a6e53
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Cortex-A65x4 and Cortex-A65AEx8 is now included in the list of the
supported Arm Fixed Virtual Platforms.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ibfcaec11bc75549d60455e96858d79b679e71e5e
The maintainers.rst file lists files and directories that each contributor looks
after in the TF-A source tree. As files and directories move around over time,
some pathnames had become invalid. Fix them, either by updating the path if
it has just moved, or deleting it altogether if it doesn't seem to exist
anymore.
Change-Id: Idb6ff4d8d0b593138d4f555ec206abcf68b0064f
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
It is needed to make it appear in the table of contents. Right now,
all Amlogic documentation pages appear under the "Platform ports"
section, except the AXG one.
Change-Id: Ibcfc3b156888d2a9574953578978b629e185c708
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Till now TF-A allows limited number of external images to be made part
of FIP. With SPM coming along, there may exist multiple SP packages
which need to be inserted into FIP. To achieve this we need a more
scalable approach to feed SP packages to FIP.
This patch introduces changes in build system to generate and add SP
packages into FIP based on information provided by platform.
Platform provides information in form of JSON which contains layout
description of available Secure Partitions.
JSON parser script is invoked by build system early on and generates
a makefile which updates FIP, SPTOOL and FDT arguments which will be
used by build system later on for final packaging.
"SP_LAYOUT_FILE" passed as a build argument and can be outside of TF-A
tree. This option will be used only when SPD=spmd.
For each SP, generated makefile will have following entries
- FDT_SOURCES += sp1.dts
- SPTOOL_ARGS += -i sp1.img:sp1.dtb -o sp1.pkg
- FIP_ARGS += --blob uuid=XXXX-XXX...,file=SP1.pkg
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ib6a9c064400caa3cd825d9886008a3af67741af7
The CPUACTLR_EL1 register on Cortex-A57 CPUs supports a bit to enable
non-cacheable streaming enhancement. Platforms can set this bit only
if their memory system meets the requirement that cache line fill
requests from the Cortex-A57 processor are atomic.
This patch adds support to enable higher performance non-cacheable load
forwarding for such platforms. Platforms must enable this support by
setting the 'A57_ENABLE_NONCACHEABLE_LOAD_FWD' flag from their
makefiles. This flag is disabled by default.
Change-Id: Ib27e55dd68d11a50962c0bbc5b89072208b4bac5
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
When TF-A is built with RESET_TO_BL31=1 option, BL31 is the
first image to be run and should have all the memory allocated
to it except for the memory reserved for Shared RAM at the start
of Trusted SRAM.
This patch fixes FVP BL31 load address and its image size for
RESET_TO_BL31=1 option. BL31 startup address should be set to
0x400_1000 and its maximum image size to the size of Trusted SRAM
minus the first 4KB of shared memory.
Loading BL31 at 0x0402_0000 as it is currently stated in
'\docs\plat\arm\fvp\index.rst' causes EL3 exception when the
image size gets increased (i.e. building with LOG_LEVEL=50)
but doesn't exceed 0x3B000 not causing build error.
Change-Id: Ie450baaf247f1577112f8d143b24e76c39d33e91
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This patch:
- Add the __COHERENT_RAM_START__ and __COHERENT_RAM_END__ symbols.
- Improve how the symbols are found with a regex.
- Add a build option to revert the memory layout output.
Change-Id: I54ec660261431bc98d78acb0f80e3d95bc5397ac
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
This patch adds information on the PMU configuration registers
and security considerations related to the PMU.
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
Change-Id: I36b15060b9830a77d3f47f293c0a6dafa3c581fb
At the moment, address demangling is only used by the backtrace
functionality. However, at some point, other parts of the TF-A
codebase may want to use it.
The 'demangle_address' function is replaced with a single XPACI
instruction which is also added in 'do_crash_reporting()'.
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change-Id: I4424dcd54d5bf0a5f9b2a0a84c4e565eec7329ec
Introduce macro 'CSS_SGI_CHIP_COUNT' to allow Arm CSS platforms with
multi-chip support to define number of chiplets on the platform. By
default, this flag is set to 1 and does not affect the existing single
chip platforms.
For multi-chip platforms, override the default value of
CSS_SGI_CHIP_COUNT with the number of chiplets supported on the
platform. As an example, the command below sets the number of chiplets
to two on the RD-N1-Edge multi-chip platform:
export CROSS_COMPILE=<path-to-cross-compiler>
make PLAT=rdn1edge CSS_SGI_CHIP_COUNT=2 ARCH=aarch64 all
Change-Id: If364dc36bd34b30cc356f74b3e97633933e6c8ee
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Use the firmware configuration framework to store the io_policies
information inside the configuration device tree instead of the static
structure in the code base.
The io_policies required by BL1 can't be inside the dtb, as this one is
loaded by BL1, and only available at BL2.
This change currently only applies to FVP platform.
Change-Id: Ic9c1ac3931a4a136aa36f7f58f66d3764c1bfca1
Signed-off-by: Louis Mayencourt <louis.mayencourt@arm.com>
Enables usage of ARM_ROTPK_LOCATION=regs for FVP board.
Removes hard-coded developer keys. Instead, setting
ARM_ROTPK_LOCATION=devel_* takes keys from default directory.
In case of ROT_KEY specified - generates a new hash and replaces the
original.
Note: Juno board was tested by original feature author and was not tested
for this patch since we don't have access to the private key. Juno
implementation was moved to board-specific file without changing
functionality. It is not known whether byte-swapping is still needed
for this platform.
Change-Id: I0fdbaca0415cdcd78f3a388551c2e478c01ed986
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>
This patch expands the coding style documentation, splitting it
into two documents: the core style rules and extended guidelines.
Note that it does not redefine or change the coding style (aside
from section 4.6.2) - generally, it is only documenting the
existing style in more detail.
The aim is for the coding style to be more readable and, in turn,
for it to be followed by more people. We can use this as a more
concrete reference when discussing the accepted style with external
contributors.
Change-Id: I87405ace9a879d7f81e6b0b91b93ca69535e50ff
Signed-off-by: Paul Beesley <paul.beesley@arm.com>
Signed-off-by: Petre-Ionut Tudor <petre-ionut.tudor@arm.com>
BL2 is unconditionally setting 0 (OPTEE_AARCH64) in arg0 even when the
BL32 image is 32bit (OPTEE_AARCH32). This is causing the boot to hang
when ATOS (32bit Amlogic BL32 binary-only TEE OS) is used.
Since we are not aware of any Amlogic platform shipping a 64bit version
of ATOS we can hardcode OPTEE_AARCH32 / MODE_RW_32 when using ATOS.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Iaea47cf6dc48bf8a646056761f02fb81b41c78a3
Introduce the preliminary support for the Amlogic A113D (AXG) SoC.
This port is a minimal implementation of BL31 capable of booting
mainline U-Boot, Linux and chainloading BL32 (ATOS).
Tested on a A113D board.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change-Id: Ic4548fa2f7c48d61b485b2a6517ec36c53c20809
Since Sphinx 2.3.0 backquotes are replaced to \textasciigrave{} during
building latexpdf. Using this element in a \sphinxhref{} breaks the
build. In order to avoid this error backquotes must not be used in
external hyperlinks.
Signed-off-by: Imre Kis <imre.kis@arm.com>
Change-Id: Ie3cf454427e3d5a7b7f9829b42be45aebda7f0dd
The current URL for QEMU_EFI.fd is not found. Update the link to
point to the new one.
If you run the shell command as instructed, you will see this error:
qemu-system-aarch64: keep_bootcon: Could not open 'keep_bootcon': No such file or directory
The part "console=ttyAMA0,38400 keep_bootcon root=/dev/vda2" is the
kernel parameter, so it must be quoted.
As of writing, QEMU v4.2.0 is the latest, but it does not work for
TF-A (It has been fixed in the mainline.) QEMU v4.1.0 works fine.
With those issues addressed, I succeeded in booting the latest kernel.
Tested with QEMU v4.1.0 and Linux 5.5 (defconfig with no modification).
Update the tested versions.
Change-Id: Ic85db0e688d67b1803ff890047d37de3f3db2daa
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Allows to select the chain of trust to use when the Trusted Boot feature
is enabled. This affects both the cert_create tool and the firmware
itself.
Right now, the only available CoT is TBBR.
Change-Id: I7ab54e66508a1416cb3fcd3dfb0f055696763b3d
Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
Command to build HTML-formatted pages from docs:
make doc
Change-Id: I4103c804b3564fe67d8fc5a3373679daabf3f2e9
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
This patch adds 'calc_hash' function using Mbed TLS library
required for Measured Boot support.
Change-Id: Ifc5aee0162d04db58ec6391e0726a526f29a52bb
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
CPUECTLR_EL1.EXTLLC bit indicates the presense of internal or external
last level cache(LLC) in the system, the reset value is internal LLC.
To cater for the platforms(like N1SDP) which has external LLC present
introduce a new build option 'NEOVERSE_N1_EXTERNAL_LLC' which can be
enabled by platform port.
Signed-off-by: Manish Pandey <manish.pandey2@arm.com>
Change-Id: Ibf475fcd6fd44401897a71600f4eafe989921363
This implementation simply mimics that of BL31.
Change-Id: Ibbaa4ca012d38ac211c52b0b3e97449947160e07
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This implementation simply mimics that of BL31.
I did not implement the ENABLE_PIE support for BL2_IN_XIP_MEM=1 case.
It would make the linker script a bit uglier.
Change-Id: If3215abd99f2758dfb232e44b50320d04eba808b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Madhukar Pappireddy
Mark Dykes
Sumit Garg
Sandrine Bailleux
Imre Kis
Louis Mayencourt
Manish Pandey
Varun Wadekar
Alexei Fedorov
Petre-Ionut Tudor
Olivier Deprez
Vijayenthiran Subramaniam
Max Shvetsov
Paul Beesley
György Szing
Carlo Caione
Masahiro Yamada
Soby Mathew