spd trusty requires memory dynamic mapping feature to be
enabled, so we have to use xlat table library v2 instead
of v1.
Signed-off-by: Ji Luo <ji.luo@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I2813af9c7878b1fc2a59e27619c5b643af6a1e91
This patch moves all GICv3 driver files into new added
'gicv3.mk' makefile for the benefit of the generic driver
which can evolve in the future without affecting platforms.
The patch adds GICv3 driver configuration flags
'GICV3_IMPL', 'GICV3_IMPL_GIC600_MULTICHIP' and
'GICV3_OVERRIDE_DISTIF_PWR_OPS' described in
'GICv3 driver options' section of 'build-option.rst'
document.
NOTE: Platforms with GICv3 driver need to be modified to
include 'drivers/arm/gic/v3/gicv3.mk' in their makefiles.
Change-Id: If055f6770ff20f5dee5a3c99ae7ced7cdcac5c44
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
This removes hardcoded iomux/clk/addr configuration for debug uart,
provides possibility (as a workaround, till that information isn't
provided via DT) to set this configuration during compile time via
IMX_DEBUG_UART build flag.
Usage:
$ make PLAT=imx8qm IMX_DEBUG_UART=1 bl31
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Change-Id: Ib5f5dd81ba0c8ad2b2dc5647ec75629072f511c5
This patch provides separation of GICD, GICR accessor
functions and adds new macros for GICv3 registers access
as a preparation for GICv3.1 and GICv4 support.
NOTE: Platforms need to modify to include both
'gicdv3_helpers.c' and 'gicrv3_helpers.c' instead of the
single helper file previously.
Change-Id: I1641bd6d217d6eb7d1228be3c4177b2d556da60a
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
On i.MX8QM/i.MX8QX with system controller inside, the SRTC is
managed by SCFW(system controller firmware) and some functions
like setting SRTC's time etc. can ONLY be requested from secure
world, so SIP runtime service is needed for such kind of operations,
this patch adds SRTC SIP runtime service support for i.MX8QM and
i.MX8QX.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
This patch makes the build system link the console framework code by
default, like it already does with other common libraries (e.g. cache
helpers). This should not make a difference in practice since TF is
linked with --gc-sections, so the linker will garbage collect all
functions and data that are not referenced by any other code. Thus, if a
platform doesn't want to include console code for size reasons and
doesn't make any references to console functions, the code will not be
included in the final binary.
To avoid compatibility issues with older platform ports, only make this
change for the MULTI_CONSOLE_API.
Change-Id: I153a9dbe680d57aadb860d1c829759ba701130d3
Signed-off-by: Julius Werner <jwerner@chromium.org>
- Migrate to new GIC interfaces.
- Migrate to bl31_early_platform_setup2().
- Remove references to removed build options.
Change-Id: Ia7c63f75325ea4b41e32a9de3f01b0007d0ae210
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
Add system power off support for i.MX8QM,
when Linux kernel issues "poweroff" command,
TF-A will send command to inform system
controller to power off whole board according
to board design, tested on i.MX8QM MEK board.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
NXP's i.MX8QM is an ARMv8 SoC with 2 clusters, 2 Cortex-A72
cores in one cluster and 4 Cortex-A53 in the other cluster,
and also has system controller (Cortex-M4) inside, documentation
can be found in below link:
https://www.nxp.com/products/processors-and-microcontrollers/
applications-processors/i.mx-applications-processors/i.mx-8-processors:IMX8-SERIES
This patch adds support for booting up SMP linux kernel (v4.9).
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Ji Luo
Alexei Fedorov
Igor Opaniuk
Ambroise Vincent
Anson Huang
Julius Werner
Antonio Nino Diaz