ESPI register offset should also be shifted right by REG##R_SHIFT to
keep consistent.
It is not a functional issue, for GICD_OFFSET_64() is only used for
GICD_IROUTER<E>, and IROUTER_SHIFT is 0.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I76eee5c50e4300890e78e80bddde135ce88daa2d
Add debug log for the maximum supported INTID of SPI and eSPI on the
current GIC implementation.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Ie45ab1d85b39658c4ca4bc54ee433ac44e41d03f
The GICv3 architecture allows GICD_TYPER.ITLinesNumber to be 31, so
the maximum possible value for num_ints is 1024. The value must be
limited to (MAX_SPI_ID + 1), or GICD_OFFSET() will consider it as ESPI
INTID and return wrong register address.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: Iddcb83d3e5d241b39f4176c19c2bceaa2c3dd653
In function gicv3_spis_config_defaults(), the variable num_ints is set
to (maximum SPI INTID + 1), while num_eints is set to (maximum ESPI
INTID). It introduces not only inconsistency to the code, but also
logical bug in the "for" loops, for the INTID of num_eints is also
valid and the check should be inclusive.
Fix this by setting num_eints to (maximum ESPI INTID + 1) as well.
Fix similar issues in gicv3_distif_save() and
gicv3_distif_init_restore().
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I4425777d17e84e85f38853603340bd348640154f
RESTORE/SAVE_GICD_EREGS uses (int_id - (MIN_ESPI_ID - MIN_SPI_ID)) to
get the context array index for ESPI, which will override the space of
standard SPI starting from (MIN_SPI_ID + MIN_SPI_ID).
However, using TOTAL_SPI_INTR_NUM to replace the above MIN_SPI_ID
cannot totally fix the issue, for TOTAL_SPI_INTR_NUM is not well
aligned and the array index will be rounded down by the shifting
operation if being shifted more than 2 bits. It will cause buffer
override again when the existing maximum SPI reaches 1019.
So round up TOTAL_SPI_INTR_NUM with (1 << REG##R_SHIFT) for GICD
context arrays.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I5be2837c42f381a62f8d46a4ecd778009b1fe059
In function gicv3_rdistif_probe(), line #1322 implies
gicv3_driver_data->mpidr_to_core_pos() may be null, but the original
code uses this interface to get current CPU index unconditionally.
It is better to use MPIDR to probe GICR which does not depend on
gicv3_driver_data->mpidr_to_core_pos().
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Change-Id: I64add055385040fe0a56b977e2299608e2309a6e
Increase the core count and add respective entries in DTS.
Add Klein assembly file to cpu sources for core initialization.
Add SCMI entries for cores.
Signed-off-by: Avinash Mehta <avinash.mehta@arm.com>
Change-Id: I14dc1d87df6dcc8d560ade833ce1f92507054747
When building TF-A with USE_ROMLIB=1 and -j make options, the build fails with the following error:
make[1]: *** No rule to make target '/build/juno/debug/romlib/romlib.bin', needed by 'bl1_romlib.bin'.
This patch fixes that issue.
Signed-off-by: Zelalem <zelalem.aweke@arm.com>
Change-Id: I0cca416f3f50f400759164e0735c2d6b520ebf84
* changes:
docs: marvell: Replace ESPRESSObin-Ultra TF-A build example by full example how to build production release of Marvell firmware image
docs: marvell: Fix description of flash-image.bin image
docs: marvell: Add information into CLOCKSPRESET option how to identify CPU frequency
docs: marvell: Reformat DDR_TOPOLOGY option and mention EspressoBin-Ultra board
docs: marvell: Move Supported Marvell platforms to PLAT build option
* changes:
docs: marvell: Update info about WTMI_IMG option
plat: marvell: armada: a3k: Remove unused variable WTMI_SYSINIT_IMG from Makefile
plat: marvell: armada: Show informative build messages and blank lines
plat: marvell: armada: Move definition of mrvl_flash target to common marvell_common.mk file
plat: marvell: armada: a3k: Use $(Q) instead of @
plat: marvell: armada: a3k: Add a new target mrvl_uart which builds UART image
plat: marvell: armada: a3k: Build UART image files directly in $(BUILD_UART) subdirectory
plat: marvell: armada: a3k: Build intermediate files in $(BUILD_PLAT) directory
plat: marvell: armada: a3k: Correctly set DDR_TOPOLOGY and CLOCKSPRESET for WTMI
plat: marvell: armada: a3k: Allow use of the system Crypto++ library
docs: marvell: Update info about WTP and MV_DDR_PATH parameters
plat: marvell: armada: a3k: Add checks that WTP, MV_DDR_PATH and CRYPTOPP_PATH are correctly defined
docs: marvell: Update mv-ddr-marvell and A3700-utils-marvell branches
ESPRESSObin-Ultra TF-A build example was now just a copy+paste of previous
mentioned example. It produced debug binary with custom log level, which
was not described. So rather replace this duplicate build example by a full
example with all steps how to build production release of Marvell firmware
image for EspressoBin with 1GHz CPU and 1GB DDR4 RAM.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ief1b8bc96a3035ebd8421bd68dca5eb5c8d8fd52
Reformat list of boards, remove unsupported OcteonTX2 and mention
supported Turris MOX board.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I22cea7f77fd078554c7f0ed4108781626209e563
* changes:
allwinner: Leave CPU power alone during BL31 setup
allwinner: psci: Invert check in .validate_ns_entrypoint
allwinner: psci: Drop MPIDR check from .pwr_domain_on
allwinner: psci: Drop .get_node_hw_state callback
AMU counters are used for monitoring the CPU performance. RD-N2 platform
has architected AMU available for each core. Enable the use of AMU by
non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).
Change-Id: I5cc749cf63c18fc5c7563dd754c2f42990a97e23
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
AMU counters are used for monitoring the CPU performance. RD-V1 platform
has architected AMU available for each core. Enable the use of AMU by
non-secure OS for supporting the use of counters for processor
performance control (ACPI CPPC).
Change-Id: I4003d21407953f65b3ce99eaa8f496d6052546e0
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Some of the PSCI platform callbacks were restricted on RD-V1 platform
because the idle was not functional. Now that it is functional, remove
all the restrictions on the use PSCI platform callbacks.
Change-Id: I4cb97cb54de7ee166c30f28df8fea653b6b425c7
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
It does not have to be supported by the current shell used in Makefile.
Replace it by a simple echo with implicit newline.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I97fe44986ac36d3079d5258c67f0c9184537e7f0
Default WTMI_IMG value was documented incorrectly. Also WTMI_IMG name may
be misleading as this option does not specify full WTMI image, just a main
loop (e.g. fuse.bin or custom RTOS image) without hardware initialization
code (DDR, CPU and clocks).
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I3de4a27ce2165b962fa628c992fd8f80151efd7c
This change separates building of flash and UART images, so it is possible
to build only one of these images. Also this change allows make to build
them in parallel.
Target mrvl_flash now builds only flash image and mrvl_uart only UART
image. This change reflects it also in the documentation.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ie9ce4538d52188dd26d99dfeeb5ad171a5b818f3
This removes need to move files and also allows to build uart and flash
images in parallel.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I13bea547d7849615e1c1e11d333c8c99e568d3f6
Currently a3700_common.mk makefile builds intermediate files in TF-A top
level directory and also outside of the TF-A tree. This change fixes this
issue and builds all intermediate files in $(BUILD_PLAT) directory.
Part of this change is also removal of 'rm' and 'mv' commands as there is
no need to remove or move intermediate files from outside of the TF-A build
tree.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I72e3a3024bd3fdba1b991a220184d750029491e9
When building WTMI image we need to correctly set DDR_TOPOLOGY and
CLOCKSPRESET variables which WTMI build system expect. Otherwise it use
default values.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: Ib83002194c8a6c64a2014899ac049bd319e1652f
This change introduces two new A3720 parameters, CRYPTOPP_LIBDIR and
CRYPTOPP_INCDIR, which can be used to specify directory paths to
pre-compiled Crypto++ library and header files.
When both new parameters are specified then the source code of Crypto++ via
CRYPTOPP_PATH parameter is not needed. And therefore it allows TF-A build
process to use system Crypto++ library.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I6d440f86153373b11b8d098bb68eb7325e86b20b
For SoCs which do not implement RAS, use DSB as a barrier to
synchronize pending external aborts at the entry and exit of
exception handlers. This is needed to isolate the SErrors to
appropriate context.
However, this introduces an unintended side effect as discussed
in the https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3440
A summary of the side effect and a quick workaround is provided as
part of this patch and summarized here:
The explicit DSB at the entry of various exception vectors in BL31
for handling exceptions from lower ELs can inadvertently trigger an
SError exception in EL3 due to pending asyncrhonouus aborts in lower
ELs. This will end up being handled by serror_sp_elx in EL3 which will
ultimately panic and die.
The way to workaround is to update a flag to indicate if the exception
truly came from EL3. This flag is allocated in the cpu_context
structure. This is not a bullet proof solution to the problem at hand
because we assume the instructions following "isb" that help to update
the flag (lines 100-102 & 139-141) execute without causing further
exceptions.
Change-Id: I4d345b07d746a727459435ddd6abb37fda24a9bf
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>
These variables must contain a path to a valid directory (not a file) which
really exists. Also WTP and MV_DDR_PATH must point to either a valid Marvell
release tarball or git repository.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I1ad80c41092cf3ea6a625426df62b7d9d6f37815
The value of stdout-path is a string and as a result, we can't use a
label as a reference to the serial0 node. This change fixes the
stdout-path property for N1SDP, Morello and TC0 by pointing to the
right alias.
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Change-Id: I3d403389a424569be56327fab4140fec06f96d37
This bug manifests itself as a segfault triggered by a double-free.
I noticed that right before the double-free, the sk list contained 2
elements with the same address.
(gdb) p sk_X509_EXTENSION_value(sk, 1)
$34 = (X509_EXTENSION *) 0x431ad0
(gdb) p sk_X509_EXTENSION_value(sk, 0)
$35 = (X509_EXTENSION *) 0x431ad0
(gdb) p sk_X509_EXTENSION_num(sk)
$36 = 2
This caused confusion; this should never happen.
I figured that this was caused by a ext_new_xxxx function freeing
something before it is added to the list, so I put a breakpoint on
each of them to step through. I was suprised to find that none of my
breakpoints triggered for the second element of the iteration through
the outer loop just before the double-free.
Looking through the code, I noticed that it's possible to avoid doing
a ext_new_xxxx, when either:
* ext->type == NVCOUNTER and ext->arg == NULL
* ext->type == HASH and ext->arg == NULL and ext->optional == false
So I put a breakpoint on both.
It turns out that it was the HASH version, but I added a fix for both.
The fix for the Hash case is simple, as it was a mistake. The fix for
the NVCOUNTER case, however, is a bit more subtle. The NVCOUNTER may
be optional, and when it's optional we can skip it. The other case,
when the NVCOUNTER is required (not optinal), the `check_cmd_params`
function has already verified that the `ext->arg` must be non-NULL.
We assert that before processing it to covert any possible segfaults
into more descriptive errors.
This should no longer cause double-frees by adding the same ext twice.
Change-Id: Idae2a24ecd964b0a3929e6193c7f85ec769f6470
Signed-off-by: Jimmy Brisson <jimmy.brisson@arm.com>
The certification tool creates all the certificates mentioned
statically in the code rather than taking explicit certificate
requests from the command line parameters.
Code is optimized to avoid unnecessary attempts to create
non-requested certificates.
Signed-off-by: Manish V Badarkhe <Manish.Badarkhe@arm.com>
Change-Id: I78feac25bc701bf8f08c6aa5a2e1590bec92d0f2
Marvell finally started providing the latest version of mv-ddr-marvell and
A3700-utils-marvell code in master branch of their git repositories.
Reflect this in build instructions.
Signed-off-by: Pali Rohár <pali@kernel.org>
Change-Id: I08d1189dac60eb2a28335c68f611c1da634106f6
Manish Pandey
Heyi Guo
Avinash Mehta
Zelalem
Madhukar Pappireddy
Pali Rohár
André Przywara
Pranav Madhu
Sandrine Bailleux
Lauren Wehrmeister
Nikos Nikoleris
Jimmy Brisson
Manish V Badarkhe