Add the possibility to configure console UART baudrate, it can be passed
as a command line parameter with STM32MP_UART_BAUDRATE. The default value
remains 115200.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I000df70c10b2b4dac1449556596f9820c36cf243
Add an early UART console to ease debug before UART is fully configured.
This is done under flag STM32MP_EARLY_CONSOLE in the first STM32MP1
platform function called (bl2_el3_early_platform_setup()). It uses the
parameters defined for crash console: STM32MP_DEBUG_USART* macros.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Id6be62368723a0499e97bbf56fb52c166fcbdfad
Use dt_find_otp_name() to retrieve platform OTP information
from device tree, directly or through stm32_get_otp_index() and
stm32_get_otp_value() platform services.
String definitions replace hard-coded values, they are used to call
this new function.
Change-Id: I81213e4a9ad08fddadc2c97b064ae057a4c79561
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
As the UART is already initialized, no need to check for UART clock
or reset in next BL. An issue can appear if the next BL device tree
(e.g HW_CONFIG) doesn't use the same clocks or resets (like SCMI ones).
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I044ef2386abe2d3dba5a53c3685440d64ca50a4f
Protect the UART instance used for serial boot
with UART used for console.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: Ieee1557b34e7baa81594c3fbf0513191737027bf
Use stm32mp_uart_console_setup() in SP_min setup.
Adapt the function stm32mp_uart_console_setup() for BL32 (no reset, add
CONSOLE_FLAG_RUNTIME under DEBUG.
Change-Id: Ib2d35c8d285dafb680aa218872ad679cbf43d0ed
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To ease console configuration, a dedicated function is created:
stm32mp_uart_console_setup(). The code will also be common for the
different BLs.
Change-Id: Idf3cad756f125ca2313cf30b1311637a9df8f27f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
An STM32 image with the awaited header major version shouldn't be forbid
to boot. If the minor differs, then it means only non-mandatory options
have been added in the reserved fields, and the header remains backward
compatible.
Change-Id: Iff16b67f95c728e2f1d128bd1760a4be497c5ca3
Signed-off-by: Yann Gautier <yann.gautier@st.com>
BL2 still uses the STM32 header binary format to be loaded from ROM code.
BL32 and BL33 and their respective device tree files are now put together
in a FIP file.
One DTB is created for each BL. To reduce their sizes, 2 new dtsi file are
in charge of removing useless nodes for a given BL. This is done because
BL2 and BL32 share the same device tree files base.
The previous way of booting is still available, the compilation flag
STM32MP_USE_STM32IMAGE has to be set to 1 in the make command. Some files
are duplicated and their names modified with _stm32_ to avoid too much
switches in the code.
Change-Id: I1ffada0af58486d4cf6044511b51e56b52269817
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Some parameters from BootROM boot context can be required after boot.
To save space in SYSRAM, this context can be overwritten during images
load sequence. The needed information (here the boot interface) is
then saved in a local variable.
Change-Id: I5e1ad4630ccf78480f415a0a83939005ae67729e
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
In BL2, the DDR can be mapped as secured in MMU, as no other SW
has access to it during its execution.
The TZC400 configuration is also updated to reflect this. When using
OP-TEE, the TZC400 is reconfigured at the end of BL2, to match OP-TEE
mapping. Else, SP_min will be in charge to reconfigure TZC400 to set
DDR non-secure.
Change-Id: Ic5ec614b218f733796feeab1cdc425d28cc7c103
Signed-off-by: Yann Gautier <yann.gautier@st.com>
The JEDEC information for STMicroelectronics is:
JEDEC_ST_MFID U(0x20)
JEDEC_ST_BKID U(0x0)
And rely on platform functions to get chip IP and revision.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: I4fa4ac8bb5583b1871b768decc9fe08e8966ff54
Retrieve peripheral base address from a define instead of
parsing the device tree. The goal is to improve execution time.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: I2588c53ad3d4abcc3d7fe156458434a7940dd72b
Relation between GPIO banks and their base address and offset address
if platform dependent. This change moves helper functions
stm32_get_gpio_bank_base() and stm32_get_gpio_bank_offset() from
plat/st/common to plat/st/stm32mp1/.
Change-Id: Id3d03e585746aa5509c6fab7d88183a92d561e3f
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
A speculative accesses to DDR could be done whereas it was not reachable
and could lead to bus stall.
To correct this the dynamic mapping in MMU is used.
A first mapping is done for DDR tests with MT_NON_CACHEABLE attribute,
once DDR access is setup. It is then unmapped and a new mapping DDR is done
with cacheable attribute (through MT_MEMORY) to speed-up BL33 (or OP-TEE)
load.
The disabling of cache during DDR tests is also removed, as now useless.
A call to new functions stm32mp_{,un}map_ddr_non_cacheable() is done
instead.
PLAT_XLAT_TABLES_DYNAMIC is activated globally as used in BL2 and BL32.
BL33 max size is also updated to take into account the secure and shared
memory areas. Those are used in OP-TEE case.
Change-Id: I22c48b4a48255ee264991c34ecbb15bfe87e67c3
Signed-off-by: Yann Gautier <yann.gautier@st.com>
This function can be used on several stm32mp devices, it is then moved in
plat/st/common/stm32mp_common.c.
Change-Id: I862debe39604410f71a9ddc28713026362e9ecda
Signed-off-by: Yann Gautier <yann.gautier@st.com>
To use spinlocks, MMU should be enabled, as well as data cache.
A common function is created (moved from clock file).
It is then used whenever a spinlock has to be taken, in BSEC and clock
drivers.
Change-Id: I94baed0114a2061ad71bd5287a91bf7f1c6821f6
Signed-off-by: Yann Gautier <yann.gautier@st.com>
GPIOx clocks are specific to each STM32MP platforms.
This change moves function stm32_get_gpio_bank_clock() from stm32mp
common source files to platform private stm32mp1_private.c source file.
Change-Id: I9616c0d3fe4d10af715d6f2d1550c13ab62c829a
Signed-off-by: Yann Gautier <yann.gautier@st.com>
PWR, RCC, DDRPHYC & DDRCTRL addresses can be retrieved from device tree.
Platform asserts the value read from the DT are the SoC addresses.
Change-Id: I43f0890b51918a30c87ac067d3780ab27a0f59de
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Nicolas LE BAYON <nicolas.le.bayon@st.com>
Include all RCC, clocks and reset headers from stm32mp1_def.h
which if exported to the firmware through platform_def.h.
The same dependency removal is done in common code as well.
Some useless includes are also removed in stm32_sdmmc2 driver.
Change-Id: I731ea5775c3fdb7f7b0c388b93923ed5e84b8d3f
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Mainly remove suffix 1 from prefix stm32mp1 in several macros and functions
that can be used in drivers shared by different platforms.
Change-Id: I2295c44f5b1edac7e80a93c0e8dfd671b36e88e7
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Some parts of code could be shared with platform derivatives,
or new platforms.
A new folder plat/st/common is created to put common parts.
stm32mp_common.h is a common API aggregate.
Remove some casts where applicable.
Fix some types where applicable.
Remove also some platform includes that are already in stm32mp1_def.h.
Change-Id: I46d763c8d9e15732d1ee7383207fd58206d7f583
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Yann Gautier
Yann Gautier
Lionel Debieve
Nicolas Le Bayon
Etienne Carriere