All files including plat/mediatek/mt8173/drivers/gpio/gpio.h were
using system includes instead of user includes, which may cause the
wrong version of the header to be included. Said includes have been
changed to user includes to make sure that the included file is the
wanted one.
Change-Id: I29bdfe96fbd9a7900875e2357bbb43f3ea431fa5
This patch moves the private GIC common accessors from `gic_common.h` to
a new private header file `gic_common_private.h`. This patch also adds
additional comments to GIC register accessors to highlight the fact
that some of them access register values that correspond to multiple
interrupt IDs. The convention used is that the `set`, `get` and `clr`
accessors access and modify the values corresponding to a single interrupt
ID whereas the `read` and `write` GIC register accessors access the raw
GIC registers and it could correspond to multiple interrupt IDs depending
on the register accessed.
Change-Id: I2643ecb2533f01e3d3219fcedfb5f80c120622f9
The code to set the interrupt priority for secure interrupts in the
new GICv2 and GICv3 drivers is incorrect. The setup code to configure
interrupt priorities of secure interrupts, one interrupt at a time, used
gicd_write_ipriorityr()/gicr_write_ipriority() function affecting
4 interrupts at a time. This bug did not manifest itself because all the
secure interrupts were configured to the highest secure priority(0) during
cold boot and the adjacent non secure interrupt priority would be configured
later by the normal world. This patch introduces new accessors,
gicd_set_ipriorityr() and gicr_set_ipriorityr(), for configuring priority
one interrupt at a time and fixes the the setup code to use the new
accessors.
FixesARM-software/tf-issues#344
Change-Id: I470fd74d2b7fce7058b55d83f604be05a27e1341
GICD_IPRIORITYR and GICD_ITARGETSR specifically support byte addressing
so that individual interrupt priorities can be atomically updated by
issuing a single byte write. The previous implementation of
gicd_set_ipriority() and gicd_set_itargetsr() used 32-bit register
accesses, modifying values for 4 interrupts at a time, using a
read-modify-write approach. This potentially may cause concurrent changes
by other CPUs to the adjacent interrupts to be corrupted. This patch fixes
the issue by modifying these accessors to use byte addressing.
FixesARM-software/tf-issues#343
Change-Id: Iec28b5f5074045b00dfb8d5f5339b685f9425915
Currently, `ccn_snoop_dvm_domain_common()` is responsible for providing
a bitmap of HN-F and HN-I nodes in the interconnect. There is a request
node (RN) corresponding to the master interface (e.g. cluster) that needs
to be added or removed from the snoop/DVM domain. This request node is
removed from or added to each HN-F or HN-I node present in the bitmap
depending upon the type of domain.
The above logic is incorrect when participation of a master interface in
the DVM domain has to be managed. The request node should be removed
from or added to the single Miscellaneous Node (MN) in the system
instead of each HN-I node.
This patch fixes this by removing the intermediate
`ccn_snoop_dvm_domain_common()` and instead reads the MN registers to
get the needed node Id bitmap for snoop(HN-F bitmap) and DVM(MN bitmap)
domains.
Additionally, it renames `MN_DDC_SET_OFF` to `MN_DDC_SET_OFFSET` to
be inline with other macros.
Change-Id: Id896046dd0ccc5092419e74f8ac85e31b104f7a4
When BL31 is compiled at `-O3` optimization level using Linaro GCC 4.9
AArch64 toolchain, it reports the following error:
```
services/std_svc/psci/psci_common.c: In function 'psci_do_state_coordination':
services/std_svc/psci/psci_common.c:220:27: error: array subscript is above
array bounds [-Werror=array-bounds]
psci_req_local_pwr_states[pwrlvl - 1][cpu_idx] = req_pwr_state;
^
```
This error is a false positive and this patch resolves the error by asserting
the array bounds in `psci_do_state_coordination()`.
FixesARM-software/tf-issues#347
Change-Id: I3584ed7b2e28faf455b082cb3281d6e1d11d6495
In the Cortex-A35/A53/A57 CPUs library code, some of the CPU specific
reset operations are skipped if they have already been applied in a
previous invocation of the reset handler. This precaution is not
required, as all these operations can be reapplied safely.
This patch removes the unneeded test-before-set instructions in
the reset handler for these CPUs.
Change-Id: Ib175952c814dc51f1b5125f76ed6c06a22b95167
The LDNP/STNP instructions as implemented on Cortex-A53 and
Cortex-A57 do not behave in a way most programmers expect, and will
most probably result in a significant speed degradation to any code
that employs them. The ARMv8-A architecture (see Document ARM DDI
0487A.h, section D3.4.3) allows cores to ignore the non-temporal hint
and treat LDNP/STNP as LDP/STP instead.
This patch introduces 2 new build flags:
A53_DISABLE_NON_TEMPORAL_HINT and A57_DISABLE_NON_TEMPORAL_HINT
to enforce this behaviour on Cortex-A53 and Cortex-A57. They are
enabled by default.
The string printed in debug builds when a specific CPU errata
workaround is compiled in but skipped at runtime has been
generalised, so that it can be reused for the non-temporal hint use
case as well.
Change-Id: I3e354f4797fd5d3959872a678e160322b13867a1
This allows reproducible builds (same source and same compiler produce
bit-identical results) and also allows coordinating the timestamp across
multiple projects, eg. with another firmware.
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
When a CPU is powered down using PSCI CPU OFF API, it disables its caches
and updates its `aff_info_state` to OFF. The corresponding cache line is
invalidated by the CPU so that the update will be observed by other CPUs
running with caches enabled. There is a possibility that another CPU
which has been trying to turn ON this CPU via PSCI CPU ON API,
has already seen the update to `aff_info_state` and proceeds to update
the state to ON_PENDING prior to the cache invalidation. This may result
in the update of the state to ON_PENDING being discarded.
This patch fixes this issue by making sure that the update of `aff_info_state`
to ON_PENDING sticks by reading back the value after the cache flush and
retrying it if not updated. The patch also adds a dsbish() to
`psci_do_cpu_off()` to ensure ordering of the update to `aff_info_state`
prior to cache line invalidation.
FixesARM-software/tf-issues#349
Change-Id: I225de99957fe89871f8c57bcfc243956e805dcca
The debug prints used to debug translation table setup in xlat_tables.c
used the `printf()` standard library function instead of the stack
optimized `tf_printf()` API. DEBUG_XLAT_TABLE option was used to enable
debug logs within xlat_tables.c and it configured a much larger stack
size for the platform in case it was enabled. This patch modifies these
debug prints within xlat_tables.c to use tf_printf() and modifies the format
specifiers to be compatible with tf_printf(). The debug prints are now enabled
if the VERBOSE prints are enabled in Trusted Firmware via LOG_LEVEL build
option.
The much larger stack size definition when DEBUG_XLAT_TABLE is defined
is no longer required and the platform ports are modified to remove this
stack size definition.
Change-Id: I2f7d77ea12a04b827fa15e2adc3125b1175e4c23
The memory translation library in Trusted Firmware supports
non-identity mappings for Physical to Virtual addresses since commit
f984ce84ba. However, the porting guide hasn't been updated
accordingly and still mandates the platform ports to use
identity-mapped page tables for all addresses.
This patch removes this out-dated information from the Porting Guide
and clarifies in which circumstances non-identity mapping may safely
be used.
FixesARM-software/tf-issues#258
Change-Id: I84dab9f3cabfc43794951b1828bfecb13049f706
This patch reworks the section about booting an EL3 payload in the
User Guide:
- Centralize all EL3 payload related information in the same
section.
- Mention the possibility to program the EL3 payload in flash memory
and execute it in place.
- Provide model parameters for both the Base and Foundation FVPs.
- Provide some guidance to boot an EL3 payload on Juno.
Change-Id: I975c8de6b9b54ff4de01a1154cba63271d709912
We found sometimes mtcmos operation is too long in spm (>1ms),
so update a new version to fix it.
I verified with 5 hours power_LoadTest, every mtcmos control
can finish in 500us (average is 100~200us).
Change-Id: I47b712bf9898870f4abcecbea47e01b9786231d4
Signed-off-by: Fan Chen <fan.chen@mediatek.com>
1. Set more wakeup source
2. Update PCM code for control logic
Change-Id: I2ad06bd85bd1c75a22c838eab4cf5566c443b89a
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
1. Add SiP calls for subsystem power on/off and check support
2. Add subsystem power control related initialization in
bl31_plat_setup.c
3. Add subsystem power on/off and power ack waiting functions
4. Update PCM code for subsystem physical power control logic
Change-Id: Ia0ebb1964c8f9758159bcf17c1813d76ef52cf64
Signed-off-by: yt.lee <yt.lee@mediatek.com>
1. add power control for both big and Little cluster in MCDI
2. fix incorrect PCM_HOTPLUG_VALID_MASK in spm_hotplug.c
3. check the power status of cpus in cluster before setting the cputop
power control
Change-Id: Ifa85306a8bc218098667247904d281494c2f7bfe
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Move SPM related PLL settings to spm_boot_init in ARM TF SPM driver
Change-Id: I414b896caae072570c8de33a25e06db4ae011f57
Signed-off-by: yt.lee <yt.lee@mediatek.com>
This patch updates SPM driver settings and PCM code to fix USB remote
wake up problem.
Change-Id: I07a81cc64b1d226d111380580d09ae25879f4285
Signed-off-by: yt.lee <yt.lee@mediatek.com>
This patch enables dynamic clock management control to reduce power
consumption in various components.
Change-Id: I8f66d9b72c8b1d70169ffe46cc361b16a0dadb77
Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
The PL011 TRM (ARM DDI 0183G) specifies that the UART must be
disabled before any of the control registers are programmed. The
PL011 driver included in TF does not disable the UART, so the
initialization in BL2 and BL31 is violating this requirement
(and potentially in BL1 if the UART is enabled after reset).
This patch modifies the initialization function in the PL011
console driver to disable the UART before programming the
control registers.
Register clobber list and documentation updated.
FixesARM-software/tf-issues#300
Change-Id: I839b2d681d48b03f821ac53663a6a78e8b30a1a1
Currently, Trusted Firmware on ARM platforms unlocks access to the
timer frame registers that will be used by the Non-Secure world. This
unlock operation should be done by the Non-Secure software itself,
instead of relying on secure firmware settings.
This patch adds a new ARM specific build option 'ARM_CONFIG_CNTACR'
to unlock access to the timer frame by setting the corresponding
bits in the CNTACR<N> register. The frame id <N> is defined by
'PLAT_ARM_NSTIMER_FRAME_ID'. Default value is true (unlock timer
access).
Documentation updated accordingly.
FixesARM-software/tf-issues#170
Change-Id: Id9d606efd781e43bc581868cd2e5f9c8905bdbf6
GIC v2 and v3 specification references in the porting guide
should refer to publically visible links, not ARM internal links.
Change-Id: Ib47c8adda6a03581f23bcaed72d71c08c7dd9fb1
Signed-off-by: Yuping Luo <yuping.luo@arm.com>
Since commit 804040d106, the Juno port has moved from per-CPU mailboxes
to a single shared one. This patch updates an out-dated reference to
the former per-CPU mailboxes mechanism in the Firmware Design.
Change-Id: I355b54156b1ace1b3df4c4416e1e8625211677fc
Migrate all direct usage of __attribute__ to usage of their
corresponding macros from cdefs.h.
e.g.:
- __attribute__((unused)) -> __unused
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Use the new __deprecated macro from the generic cdefs header and remove
the deprecated __warn_deprecated.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>