5.2 KiB
Description
HiKey is one of 96boards. Hisilicon Kirin6220 processor is installed on HiKey.
More information are listed in link.
How to build
- Code Locations
-
ARM Trusted Firmware: link
-
edk2: link
-
OpenPlatformPkg: link
-
l-loader: link
-
uefi-tools: link
-
atf-fastboot: link
- Build Procedure
-
Fetch all the above repositories into local host. Make all the repositories in the same ${BUILD_PATH}.
-
Create the symbol link to OpenPlatformPkg in edk2.
$cd ${BUILD_PATH}/edk2
$ln -sf ../OpenPlatformPkg
-
Prepare AARCH64 && AARCH32 toolchain. Prepare python.
-
If your hikey hardware is built by CircuitCo, update uefi-tools/platform.config first. (optional)
Uncomment the below sentence. Otherwise, UEFI can't output messages on serial console on hikey.
BUILDFLAGS=-DSERIAL_BASE=0xF8015000
If your hikey hardware is built by LeMarker, nothing to do. -
Build it as debug mode. Create your own build script file or you could refer to build_uefi.sh in l-loader git repository.
BUILD_OPTION=DEBUG
export AARCH64_TOOLCHAIN=GCC5
export UEFI_TOOLS_DIR=${BUILD_PATH}/uefi-tools
export EDK2_DIR=${BUILD_PATH}/edk2
EDK2_OUTPUT_DIR=${EDK2_DIR}/Build/HiKey/${BUILD_OPTION}_${AARCH64_TOOLCHAIN}
# Build fastboot for ARM Trust Firmware. It's used for recovery mode.
cd ${BUILD_PATH}/atf-fastboot
CROSS_COMPILE=aarch64-linux-gnu- make PLAT=hikey DEBUG=1
# Convert DEBUG/RELEASE to debug/release
FASTBOOT_BUILD_OPTION=$(echo ${BUILD_OPTION} | tr '[A-Z]' '[a-z]')
cd ${EDK2_DIR}
# Build UEFI & ARM Trust Firmware
${UEFI_TOOLS_DIR}/uefi-build.sh -b ${BUILD_OPTION} -a ../arm-trusted-firmware hikey
# Generate l-loader.bin
cd ${BUILD_PATH}/l-loader
ln -sf ${EDK2_OUTPUT_DIR}/FV/bl1.bin
ln -sf ${EDK2_OUTPUT_DIR}/FV/fip.bin
ln -sf ${BUILD_PATH}/atf-fastboot/build/hikey/${FASTBOOT_BUILD_OPTION}/bl1.bin fastboot.bin
python gen_loader.py -o l-loader.bin --img_bl1=bl1.bin --img_ns_bl1u=BL33_AP_UEFI.fd
arm-linux-gnueabihf-gcc -c -o start.o start.S
arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o -o loader
arm-linux-gnueabihf-objcopy -O binary loader temp
python gen_loader_hikey.py -o l-loader.bin --img_loader=temp --img_bl1=bl1.bin --img_ns_bl1u=fastboot.bin
-
Generate partition table for aosp. The eMMC capacity is either 4GB or 8GB. Just change "aosp-4g" to "linux-4g" for debian.
$PTABLE=aosp-4g SECTOR_SIZE=512 bash -x generate_ptable.sh
- Setup Console
-
Install ser2net. Use telnet as the console since UEFI fails to display Boot Manager GUI in minicom. If you don't need Boot Manager GUI, just ignore this section.
$sudo apt-get install ser2net
-
Configure ser2net.
$sudo vi /etc/ser2net.conf
Append one line for serial-over-USB in below.
#ser2net.conf
2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner
-
Open the console.
$telnet localhost 2004
And you could open the console remotely, too.
- Flush images in recovery mode
-
Make sure Pin3-Pin4 on J15 are connected for recovery mode. Then power on HiKey.
-
Remove the modemmanager package. This package may cause the idt tool failure.
$sudo apt-get purge modemmanager
-
Run the command to download l-loader.bin into HiKey.
$sudo python hisi-idt.py -d /dev/ttyUSB1 --img1 l-loader.bin
-
Update images. All aosp or debian images could be fetched from link.
$sudo fastboot flash ptable prm_ptable.img
$sudo fastboot flash fastboot fip.bin
$sudo fastboot flash boot boot.img
$sudo fastboot flash cache cache.img
$sudo fastboot flash system system.img
$sudo fastboot flash userdata userdata.img
- Boot UEFI in normal mode
-
Make sure Pin3-Pin4 on J15 are open for normal boot mode. Then power on HiKey.
-
Reference link