arm-trusted-firmware/lib/xlat_tables_v2/xlat_tables_internal.c

1663 lines
43 KiB
C
Raw Normal View History

/*
* Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
#include <common_def.h>
#include <debug.h>
#include <errno.h>
#include <platform_def.h>
#include <string.h>
#include <types.h>
#include <utils.h>
#include <xlat_tables_arch_private.h>
xlat lib: Reorganize architectural defs Move the header files that provide translation tables architectural definitions from the library v2 source files to the library include directory. This allows to share these definitions between both versions (v1 and v2) of the library. Create a new header file that includes the AArch32 or AArch64 definitions based on the AARCH32 build flag, so that the library user doesn't have to worry about handling it on their side. Also repurpose some of the definitions the header files provide to concentrate on the things that differ between AArch32 and AArch64. As a result they now contain the following information: - the first table level that allows block descriptors; - the architectural limits of the virtual address space; - the initial lookup level to cover the entire address space. Additionally, move the XLAT_TABLE_LEVEL_MIN macro from xlat_tables_defs.h to the AArch32/AArch64 architectural definitions. This new organisation eliminates duplicated information in the AArch32 and AArch64 versions. It also decouples these architectural files from any platform-specific information. Previously, they were dependent on the address space size, which is platform-specific. Finally, for the v2 of the library, move the compatibility code for ADDR_SPACE_SIZE into a C file as it is not needed outside of this file. For v1, this code hasn't been changed and stays in a header file because it's needed by several files. Change-Id: If746c684acd80eebf918abd3ab6e8481d004ac68 Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-05-19 09:59:37 +01:00
#include <xlat_tables_defs.h>
#include <xlat_tables_v2.h>
xlat lib: Reorganize architectural defs Move the header files that provide translation tables architectural definitions from the library v2 source files to the library include directory. This allows to share these definitions between both versions (v1 and v2) of the library. Create a new header file that includes the AArch32 or AArch64 definitions based on the AARCH32 build flag, so that the library user doesn't have to worry about handling it on their side. Also repurpose some of the definitions the header files provide to concentrate on the things that differ between AArch32 and AArch64. As a result they now contain the following information: - the first table level that allows block descriptors; - the architectural limits of the virtual address space; - the initial lookup level to cover the entire address space. Additionally, move the XLAT_TABLE_LEVEL_MIN macro from xlat_tables_defs.h to the AArch32/AArch64 architectural definitions. This new organisation eliminates duplicated information in the AArch32 and AArch64 versions. It also decouples these architectural files from any platform-specific information. Previously, they were dependent on the address space size, which is platform-specific. Finally, for the v2 of the library, move the compatibility code for ADDR_SPACE_SIZE into a C file as it is not needed outside of this file. For v1, this code hasn't been changed and stays in a header file because it's needed by several files. Change-Id: If746c684acd80eebf918abd3ab6e8481d004ac68 Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-05-19 09:59:37 +01:00
#include "xlat_tables_private.h"
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
/*
* Each platform can define the size of its physical and virtual address spaces.
* If the platform hasn't defined one or both of them, default to
* ADDR_SPACE_SIZE. The latter is deprecated, though.
*/
#if ERROR_DEPRECATED
# ifdef ADDR_SPACE_SIZE
# error "ADDR_SPACE_SIZE is deprecated. Use PLAT_xxx_ADDR_SPACE_SIZE instead."
# endif
#elif defined(ADDR_SPACE_SIZE)
# ifndef PLAT_PHY_ADDR_SPACE_SIZE
# define PLAT_PHY_ADDR_SPACE_SIZE ADDR_SPACE_SIZE
# endif
# ifndef PLAT_VIRT_ADDR_SPACE_SIZE
# define PLAT_VIRT_ADDR_SPACE_SIZE ADDR_SPACE_SIZE
# endif
#endif
/*
* Allocate and initialise the default translation context for the BL image
* currently executing.
*/
REGISTER_XLAT_CONTEXT(tf, MAX_MMAP_REGIONS, MAX_XLAT_TABLES,
PLAT_VIRT_ADDR_SPACE_SIZE, PLAT_PHY_ADDR_SPACE_SIZE);
#if PLAT_XLAT_TABLES_DYNAMIC
/*
* The following functions assume that they will be called using subtables only.
* The base table can't be unmapped, so it is not needed to do any special
* handling for it.
*/
/*
* Returns the index of the array corresponding to the specified translation
* table.
*/
static int xlat_table_get_index(xlat_ctx_t *ctx, const uint64_t *table)
{
for (unsigned int i = 0; i < ctx->tables_num; i++)
if (ctx->tables[i] == table)
return i;
/*
* Maybe we were asked to get the index of the base level table, which
* should never happen.
*/
assert(0);
return -1;
}
/* Returns a pointer to an empty translation table. */
static uint64_t *xlat_table_get_empty(xlat_ctx_t *ctx)
{
for (unsigned int i = 0; i < ctx->tables_num; i++)
if (ctx->tables_mapped_regions[i] == 0)
return ctx->tables[i];
return NULL;
}
/* Increments region count for a given table. */
static void xlat_table_inc_regions_count(xlat_ctx_t *ctx, const uint64_t *table)
{
ctx->tables_mapped_regions[xlat_table_get_index(ctx, table)]++;
}
/* Decrements region count for a given table. */
static void xlat_table_dec_regions_count(xlat_ctx_t *ctx, const uint64_t *table)
{
ctx->tables_mapped_regions[xlat_table_get_index(ctx, table)]--;
}
/* Returns 0 if the speficied table isn't empty, otherwise 1. */
static int xlat_table_is_empty(xlat_ctx_t *ctx, const uint64_t *table)
{
return !ctx->tables_mapped_regions[xlat_table_get_index(ctx, table)];
}
#else /* PLAT_XLAT_TABLES_DYNAMIC */
/* Returns a pointer to the first empty translation table. */
static uint64_t *xlat_table_get_empty(xlat_ctx_t *ctx)
{
assert(ctx->next_table < ctx->tables_num);
return ctx->tables[ctx->next_table++];
}
#endif /* PLAT_XLAT_TABLES_DYNAMIC */
/*
* Returns a block/page table descriptor for the given level and attributes.
*/
uint64_t xlat_desc(const xlat_ctx_t *ctx, mmap_attr_t attr,
unsigned long long addr_pa, int level)
{
uint64_t desc;
int mem_type;
/* Make sure that the granularity is fine enough to map this address. */
assert((addr_pa & XLAT_BLOCK_MASK(level)) == 0);
desc = addr_pa;
/*
* There are different translation table descriptors for level 3 and the
* rest.
*/
desc |= (level == XLAT_TABLE_LEVEL_MAX) ? PAGE_DESC : BLOCK_DESC;
/*
* Always set the access flag, as TF doesn't manage access flag faults.
* Deduce other fields of the descriptor based on the MT_NS and MT_RW
* memory region attributes.
*/
desc |= LOWER_ATTRS(ACCESS_FLAG);
desc |= (attr & MT_NS) ? LOWER_ATTRS(NS) : 0;
desc |= (attr & MT_RW) ? LOWER_ATTRS(AP_RW) : LOWER_ATTRS(AP_RO);
/*
* Do not allow unprivileged access when the mapping is for a privileged
* EL. For translation regimes that do not have mappings for access for
* lower exception levels, set AP[2] to AP_NO_ACCESS_UNPRIVILEGED.
*/
if (ctx->xlat_regime == EL1_EL0_REGIME) {
if (attr & MT_USER) {
/* EL0 mapping requested, so we give User access */
desc |= LOWER_ATTRS(AP_ACCESS_UNPRIVILEGED);
} else {
/* EL1 mapping requested, no User access granted */
desc |= LOWER_ATTRS(AP_NO_ACCESS_UNPRIVILEGED);
}
} else {
assert(ctx->xlat_regime == EL3_REGIME);
desc |= LOWER_ATTRS(AP_NO_ACCESS_UNPRIVILEGED);
}
/*
* Deduce shareability domain and executability of the memory region
* from the memory type of the attributes (MT_TYPE).
*
* Data accesses to device memory and non-cacheable normal memory are
* coherent for all observers in the system, and correspondingly are
* always treated as being Outer Shareable. Therefore, for these 2 types
* of memory, it is not strictly needed to set the shareability field
* in the translation tables.
*/
mem_type = MT_TYPE(attr);
if (mem_type == MT_DEVICE) {
desc |= LOWER_ATTRS(ATTR_DEVICE_INDEX | OSH);
/*
* Always map device memory as execute-never.
* This is to avoid the possibility of a speculative instruction
* fetch, which could be an issue if this memory region
* corresponds to a read-sensitive peripheral.
*/
desc |= xlat_arch_regime_get_xn_desc(ctx->xlat_regime);
Fix execute-never permissions in xlat tables libs Translation regimes that only support one virtual address space (such as the ones for EL2 and EL3) can flag memory regions as execute-never by setting to 1 the XN bit in the Upper Attributes field in the translation tables descriptors. Translation regimes that support two different virtual address spaces (such as the one shared by EL1 and EL0) use bits PXN and UXN instead. The Trusted Firmware runs at EL3 and EL1, it has to handle translation tables of both translation regimes, but the previous code handled both regimes the same way, as if both had only 1 VA range. When trying to set a descriptor as execute-never it would set the XN bit correctly in EL3, but it would set the XN bit in EL1 as well. XN is at the same bit position as UXN, which means that EL0 was being prevented from executing code at this region, not EL1 as the code intended. Therefore, the PXN bit was unset to 0 all the time. The result is that, in AArch64 mode, read-only data sections of BL2 weren't protected from being executed. This patch adds support of translation regimes with two virtual address spaces to both versions of the translation tables library, fixing the execute-never permissions for translation tables in EL1. The library currently does not support initializing translation tables for EL0 software, therefore it does not set/unset the UXN bit. If EL1 software needs to initialize translation tables for EL0 software, it should use a different library instead. Change-Id: If27588f9820ff42988851d90dc92801c8ecbe0c9 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-04-27 13:30:22 +01:00
} else { /* Normal memory */
/*
* Always map read-write normal memory as execute-never.
* (Trusted Firmware doesn't self-modify its code, therefore
* R/W memory is reserved for data storage, which must not be
* executable.)
* Note that setting the XN bit here is for consistency only.
Fix execute-never permissions in xlat tables libs Translation regimes that only support one virtual address space (such as the ones for EL2 and EL3) can flag memory regions as execute-never by setting to 1 the XN bit in the Upper Attributes field in the translation tables descriptors. Translation regimes that support two different virtual address spaces (such as the one shared by EL1 and EL0) use bits PXN and UXN instead. The Trusted Firmware runs at EL3 and EL1, it has to handle translation tables of both translation regimes, but the previous code handled both regimes the same way, as if both had only 1 VA range. When trying to set a descriptor as execute-never it would set the XN bit correctly in EL3, but it would set the XN bit in EL1 as well. XN is at the same bit position as UXN, which means that EL0 was being prevented from executing code at this region, not EL1 as the code intended. Therefore, the PXN bit was unset to 0 all the time. The result is that, in AArch64 mode, read-only data sections of BL2 weren't protected from being executed. This patch adds support of translation regimes with two virtual address spaces to both versions of the translation tables library, fixing the execute-never permissions for translation tables in EL1. The library currently does not support initializing translation tables for EL0 software, therefore it does not set/unset the UXN bit. If EL1 software needs to initialize translation tables for EL0 software, it should use a different library instead. Change-Id: If27588f9820ff42988851d90dc92801c8ecbe0c9 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-04-27 13:30:22 +01:00
* The function that enables the MMU sets the SCTLR_ELx.WXN bit,
* which makes any writable memory region to be treated as
* execute-never, regardless of the value of the XN bit in the
* translation table.
*
* For read-only memory, rely on the MT_EXECUTE/MT_EXECUTE_NEVER
* attribute to figure out the value of the XN bit. The actual
* XN bit(s) to set in the descriptor depends on the context's
* translation regime and the policy applied in
* xlat_arch_regime_get_xn_desc().
*/
Fix execute-never permissions in xlat tables libs Translation regimes that only support one virtual address space (such as the ones for EL2 and EL3) can flag memory regions as execute-never by setting to 1 the XN bit in the Upper Attributes field in the translation tables descriptors. Translation regimes that support two different virtual address spaces (such as the one shared by EL1 and EL0) use bits PXN and UXN instead. The Trusted Firmware runs at EL3 and EL1, it has to handle translation tables of both translation regimes, but the previous code handled both regimes the same way, as if both had only 1 VA range. When trying to set a descriptor as execute-never it would set the XN bit correctly in EL3, but it would set the XN bit in EL1 as well. XN is at the same bit position as UXN, which means that EL0 was being prevented from executing code at this region, not EL1 as the code intended. Therefore, the PXN bit was unset to 0 all the time. The result is that, in AArch64 mode, read-only data sections of BL2 weren't protected from being executed. This patch adds support of translation regimes with two virtual address spaces to both versions of the translation tables library, fixing the execute-never permissions for translation tables in EL1. The library currently does not support initializing translation tables for EL0 software, therefore it does not set/unset the UXN bit. If EL1 software needs to initialize translation tables for EL0 software, it should use a different library instead. Change-Id: If27588f9820ff42988851d90dc92801c8ecbe0c9 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-04-27 13:30:22 +01:00
if ((attr & MT_RW) || (attr & MT_EXECUTE_NEVER)) {
desc |= xlat_arch_regime_get_xn_desc(ctx->xlat_regime);
Fix execute-never permissions in xlat tables libs Translation regimes that only support one virtual address space (such as the ones for EL2 and EL3) can flag memory regions as execute-never by setting to 1 the XN bit in the Upper Attributes field in the translation tables descriptors. Translation regimes that support two different virtual address spaces (such as the one shared by EL1 and EL0) use bits PXN and UXN instead. The Trusted Firmware runs at EL3 and EL1, it has to handle translation tables of both translation regimes, but the previous code handled both regimes the same way, as if both had only 1 VA range. When trying to set a descriptor as execute-never it would set the XN bit correctly in EL3, but it would set the XN bit in EL1 as well. XN is at the same bit position as UXN, which means that EL0 was being prevented from executing code at this region, not EL1 as the code intended. Therefore, the PXN bit was unset to 0 all the time. The result is that, in AArch64 mode, read-only data sections of BL2 weren't protected from being executed. This patch adds support of translation regimes with two virtual address spaces to both versions of the translation tables library, fixing the execute-never permissions for translation tables in EL1. The library currently does not support initializing translation tables for EL0 software, therefore it does not set/unset the UXN bit. If EL1 software needs to initialize translation tables for EL0 software, it should use a different library instead. Change-Id: If27588f9820ff42988851d90dc92801c8ecbe0c9 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2017-04-27 13:30:22 +01:00
}
if (mem_type == MT_MEMORY) {
desc |= LOWER_ATTRS(ATTR_IWBWA_OWBWA_NTR_INDEX | ISH);
} else {
assert(mem_type == MT_NON_CACHEABLE);
desc |= LOWER_ATTRS(ATTR_NON_CACHEABLE_INDEX | OSH);
}
}
return desc;
}
/*
* Enumeration of actions that can be made when mapping table entries depending
* on the previous value in that entry and information about the region being
* mapped.
*/
typedef enum {
/* Do nothing */
ACTION_NONE,
/* Write a block (or page, if in level 3) entry. */
ACTION_WRITE_BLOCK_ENTRY,
/*
* Create a new table and write a table entry pointing to it. Recurse
* into it for further processing.
*/
ACTION_CREATE_NEW_TABLE,
/*
* There is a table descriptor in this entry, read it and recurse into
* that table for further processing.
*/
ACTION_RECURSE_INTO_TABLE,
} action_t;
#if PLAT_XLAT_TABLES_DYNAMIC
/*
* Recursive function that writes to the translation tables and unmaps the
* specified region.
*/
static void xlat_tables_unmap_region(xlat_ctx_t *ctx, mmap_region_t *mm,
const uintptr_t table_base_va,
uint64_t *const table_base,
const int table_entries,
const unsigned int level)
{
assert(level >= ctx->base_level && level <= XLAT_TABLE_LEVEL_MAX);
uint64_t *subtable;
uint64_t desc;
uintptr_t table_idx_va;
uintptr_t table_idx_end_va; /* End VA of this entry */
uintptr_t region_end_va = mm->base_va + mm->size - 1;
int table_idx;
if (mm->base_va > table_base_va) {
/* Find the first index of the table affected by the region. */
table_idx_va = mm->base_va & ~XLAT_BLOCK_MASK(level);
table_idx = (table_idx_va - table_base_va) >>
XLAT_ADDR_SHIFT(level);
assert(table_idx < table_entries);
} else {
/* Start from the beginning of the table. */
table_idx_va = table_base_va;
table_idx = 0;
}
while (table_idx < table_entries) {
table_idx_end_va = table_idx_va + XLAT_BLOCK_SIZE(level) - 1;
desc = table_base[table_idx];
uint64_t desc_type = desc & DESC_MASK;
action_t action = ACTION_NONE;
if ((mm->base_va <= table_idx_va) &&
(region_end_va >= table_idx_end_va)) {
/* Region covers all block */
if (level == 3) {
/*
* Last level, only page descriptors allowed,
* erase it.
*/
assert(desc_type == PAGE_DESC);
action = ACTION_WRITE_BLOCK_ENTRY;
} else {
/*
* Other levels can have table descriptors. If
* so, recurse into it and erase descriptors
* inside it as needed. If there is a block
* descriptor, just erase it. If an invalid
* descriptor is found, this table isn't
* actually mapped, which shouldn't happen.
*/
if (desc_type == TABLE_DESC) {
action = ACTION_RECURSE_INTO_TABLE;
} else {
assert(desc_type == BLOCK_DESC);
action = ACTION_WRITE_BLOCK_ENTRY;
}
}
} else if ((mm->base_va <= table_idx_end_va) ||
(region_end_va >= table_idx_va)) {
/*
* Region partially covers block.
*
* It can't happen in level 3.
*
* There must be a table descriptor here, if not there
* was a problem when mapping the region.
*/
assert(level < 3);
assert(desc_type == TABLE_DESC);
action = ACTION_RECURSE_INTO_TABLE;
}
if (action == ACTION_WRITE_BLOCK_ENTRY) {
table_base[table_idx] = INVALID_DESC;
xlat_arch_tlbi_va_regime(table_idx_va, ctx->xlat_regime);
} else if (action == ACTION_RECURSE_INTO_TABLE) {
subtable = (uint64_t *)(uintptr_t)(desc & TABLE_ADDR_MASK);
/* Recurse to write into subtable */
xlat_tables_unmap_region(ctx, mm, table_idx_va,
subtable, XLAT_TABLE_ENTRIES,
level + 1);
/*
* If the subtable is now empty, remove its reference.
*/
if (xlat_table_is_empty(ctx, subtable)) {
table_base[table_idx] = INVALID_DESC;
xlat_arch_tlbi_va_regime(table_idx_va,
ctx->xlat_regime);
}
} else {
assert(action == ACTION_NONE);
}
table_idx++;
table_idx_va += XLAT_BLOCK_SIZE(level);
/* If reached the end of the region, exit */
if (region_end_va <= table_idx_va)
break;
}
if (level > ctx->base_level)
xlat_table_dec_regions_count(ctx, table_base);
}
#endif /* PLAT_XLAT_TABLES_DYNAMIC */
/*
* From the given arguments, it decides which action to take when mapping the
* specified region.
*/
static action_t xlat_tables_map_region_action(const mmap_region_t *mm,
const int desc_type, const unsigned long long dest_pa,
const uintptr_t table_entry_base_va, const unsigned int level)
{
uintptr_t mm_end_va = mm->base_va + mm->size - 1;
uintptr_t table_entry_end_va =
table_entry_base_va + XLAT_BLOCK_SIZE(level) - 1;
/*
* The descriptor types allowed depend on the current table level.
*/
if ((mm->base_va <= table_entry_base_va) &&
(mm_end_va >= table_entry_end_va)) {
/*
* Table entry is covered by region
* --------------------------------
*
* This means that this table entry can describe the whole
* translation with this granularity in principle.
*/
if (level == 3) {
/*
* Last level, only page descriptors are allowed.
*/
if (desc_type == PAGE_DESC) {
/*
* There's another region mapped here, don't
* overwrite.
*/
return ACTION_NONE;
} else {
assert(desc_type == INVALID_DESC);
return ACTION_WRITE_BLOCK_ENTRY;
}
} else {
/*
* Other levels. Table descriptors are allowed. Block
* descriptors too, but they have some limitations.
*/
if (desc_type == TABLE_DESC) {
/* There's already a table, recurse into it. */
return ACTION_RECURSE_INTO_TABLE;
} else if (desc_type == INVALID_DESC) {
/*
* There's nothing mapped here, create a new
* entry.
*
* Check if the destination granularity allows
* us to use a block descriptor or we need a
* finer table for it.
*
* Also, check if the current level allows block
* descriptors. If not, create a table instead.
*/
if ((dest_pa & XLAT_BLOCK_MASK(level)) ||
(level < MIN_LVL_BLOCK_DESC) ||
(mm->granularity < XLAT_BLOCK_SIZE(level)))
return ACTION_CREATE_NEW_TABLE;
else
return ACTION_WRITE_BLOCK_ENTRY;
} else {
/*
* There's another region mapped here, don't
* overwrite.
*/
assert(desc_type == BLOCK_DESC);
return ACTION_NONE;
}
}
} else if ((mm->base_va <= table_entry_end_va) ||
(mm_end_va >= table_entry_base_va)) {
/*
* Region partially covers table entry
* -----------------------------------
*
* This means that this table entry can't describe the whole
* translation, a finer table is needed.
* There cannot be partial block overlaps in level 3. If that
* happens, some of the preliminary checks when adding the
* mmap region failed to detect that PA and VA must at least be
* aligned to PAGE_SIZE.
*/
assert(level < 3);
if (desc_type == INVALID_DESC) {
/*
* The block is not fully covered by the region. Create
* a new table, recurse into it and try to map the
* region with finer granularity.
*/
return ACTION_CREATE_NEW_TABLE;
} else {
assert(desc_type == TABLE_DESC);
/*
* The block is not fully covered by the region, but
* there is already a table here. Recurse into it and
* try to map with finer granularity.
*
* PAGE_DESC for level 3 has the same value as
* TABLE_DESC, but this code can't run on a level 3
* table because there can't be overlaps in level 3.
*/
return ACTION_RECURSE_INTO_TABLE;
}
}
/*
* This table entry is outside of the region specified in the arguments,
* don't write anything to it.
*/
return ACTION_NONE;
}
/*
* Recursive function that writes to the translation tables and maps the
* specified region. On success, it returns the VA of the last byte that was
* succesfully mapped. On error, it returns the VA of the next entry that
* should have been mapped.
*/
static uintptr_t xlat_tables_map_region(xlat_ctx_t *ctx, mmap_region_t *mm,
const uintptr_t table_base_va,
uint64_t *const table_base,
const int table_entries,
const unsigned int level)
{
assert(level >= ctx->base_level && level <= XLAT_TABLE_LEVEL_MAX);
uintptr_t mm_end_va = mm->base_va + mm->size - 1;
uintptr_t table_idx_va;
unsigned long long table_idx_pa;
uint64_t *subtable;
uint64_t desc;
int table_idx;
if (mm->base_va > table_base_va) {
/* Find the first index of the table affected by the region. */
table_idx_va = mm->base_va & ~XLAT_BLOCK_MASK(level);
table_idx = (table_idx_va - table_base_va) >>
XLAT_ADDR_SHIFT(level);
assert(table_idx < table_entries);
} else {
/* Start from the beginning of the table. */
table_idx_va = table_base_va;
table_idx = 0;
}
#if PLAT_XLAT_TABLES_DYNAMIC
if (level > ctx->base_level)
xlat_table_inc_regions_count(ctx, table_base);
#endif
while (table_idx < table_entries) {
desc = table_base[table_idx];
table_idx_pa = mm->base_pa + table_idx_va - mm->base_va;
action_t action = xlat_tables_map_region_action(mm,
desc & DESC_MASK, table_idx_pa, table_idx_va, level);
if (action == ACTION_WRITE_BLOCK_ENTRY) {
table_base[table_idx] =
xlat_desc(ctx, mm->attr, table_idx_pa, level);
} else if (action == ACTION_CREATE_NEW_TABLE) {
subtable = xlat_table_get_empty(ctx);
if (subtable == NULL) {
/* Not enough free tables to map this region */
return table_idx_va;
}
/* Point to new subtable from this one. */
table_base[table_idx] = TABLE_DESC | (unsigned long)subtable;
/* Recurse to write into subtable */
uintptr_t end_va = xlat_tables_map_region(ctx, mm, table_idx_va,
subtable, XLAT_TABLE_ENTRIES,
level + 1);
if (end_va != table_idx_va + XLAT_BLOCK_SIZE(level) - 1)
return end_va;
} else if (action == ACTION_RECURSE_INTO_TABLE) {
subtable = (uint64_t *)(uintptr_t)(desc & TABLE_ADDR_MASK);
/* Recurse to write into subtable */
uintptr_t end_va = xlat_tables_map_region(ctx, mm, table_idx_va,
subtable, XLAT_TABLE_ENTRIES,
level + 1);
if (end_va != table_idx_va + XLAT_BLOCK_SIZE(level) - 1)
return end_va;
} else {
assert(action == ACTION_NONE);
}
table_idx++;
table_idx_va += XLAT_BLOCK_SIZE(level);
/* If reached the end of the region, exit */
if (mm_end_va <= table_idx_va)
break;
}
return table_idx_va - 1;
}
void print_mmap(mmap_region_t *const mmap)
{
#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
tf_printf("mmap:\n");
mmap_region_t *mm = mmap;
while (mm->size) {
tf_printf(" VA:%p PA:0x%llx size:0x%zx attr:0x%x",
(void *)mm->base_va, mm->base_pa,
mm->size, mm->attr);
tf_printf(" granularity:0x%zx\n", mm->granularity);
++mm;
};
tf_printf("\n");
#endif
}
/*
* Function that verifies that a region can be mapped.
* Returns:
* 0: Success, the mapping is allowed.
* EINVAL: Invalid values were used as arguments.
* ERANGE: The memory limits were surpassed.
* ENOMEM: There is not enough memory in the mmap array.
* EPERM: Region overlaps another one in an invalid way.
*/
static int mmap_add_region_check(xlat_ctx_t *ctx, const mmap_region_t *mm)
{
unsigned long long base_pa = mm->base_pa;
uintptr_t base_va = mm->base_va;
size_t size = mm->size;
size_t granularity = mm->granularity;
unsigned long long end_pa = base_pa + size - 1;
uintptr_t end_va = base_va + size - 1;
if (!IS_PAGE_ALIGNED(base_pa) || !IS_PAGE_ALIGNED(base_va) ||
!IS_PAGE_ALIGNED(size))
return -EINVAL;
if ((granularity != XLAT_BLOCK_SIZE(1)) &&
(granularity != XLAT_BLOCK_SIZE(2)) &&
(granularity != XLAT_BLOCK_SIZE(3))) {
return -EINVAL;
}
/* Check for overflows */
if ((base_pa > end_pa) || (base_va > end_va))
return -ERANGE;
if ((base_va + (uintptr_t)size - (uintptr_t)1) > ctx->va_max_address)
return -ERANGE;
if ((base_pa + (unsigned long long)size - 1ULL) > ctx->pa_max_address)
return -ERANGE;
/* Check that there is space in the ctx->mmap array */
if (ctx->mmap[ctx->mmap_num - 1].size != 0)
return -ENOMEM;
/* Check for PAs and VAs overlaps with all other regions */
for (mmap_region_t *mm_cursor = ctx->mmap;
mm_cursor->size; ++mm_cursor) {
uintptr_t mm_cursor_end_va = mm_cursor->base_va
+ mm_cursor->size - 1;
/*
* Check if one of the regions is completely inside the other
* one.
*/
int fully_overlapped_va =
((base_va >= mm_cursor->base_va) &&
(end_va <= mm_cursor_end_va)) ||
((mm_cursor->base_va >= base_va) &&
(mm_cursor_end_va <= end_va));
/*
* Full VA overlaps are only allowed if both regions are
* identity mapped (zero offset) or have the same VA to PA
* offset. Also, make sure that it's not the exact same area.
* This can only be done with static regions.
*/
if (fully_overlapped_va) {
#if PLAT_XLAT_TABLES_DYNAMIC
if ((mm->attr & MT_DYNAMIC) ||
(mm_cursor->attr & MT_DYNAMIC))
return -EPERM;
#endif /* PLAT_XLAT_TABLES_DYNAMIC */
if ((mm_cursor->base_va - mm_cursor->base_pa) !=
(base_va - base_pa))
return -EPERM;
if ((base_va == mm_cursor->base_va) &&
(size == mm_cursor->size))
return -EPERM;
} else {
/*
* If the regions do not have fully overlapping VAs,
* then they must have fully separated VAs and PAs.
* Partial overlaps are not allowed
*/
unsigned long long mm_cursor_end_pa =
mm_cursor->base_pa + mm_cursor->size - 1;
int separated_pa =
(end_pa < mm_cursor->base_pa) ||
(base_pa > mm_cursor_end_pa);
int separated_va =
(end_va < mm_cursor->base_va) ||
(base_va > mm_cursor_end_va);
if (!(separated_va && separated_pa))
return -EPERM;
}
}
return 0;
}
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
void mmap_add_region_ctx(xlat_ctx_t *ctx, const mmap_region_t *mm)
{
mmap_region_t *mm_cursor = ctx->mmap;
mmap_region_t *mm_last = mm_cursor + ctx->mmap_num;
unsigned long long end_pa = mm->base_pa + mm->size - 1;
uintptr_t end_va = mm->base_va + mm->size - 1;
int ret;
/* Ignore empty regions */
if (!mm->size)
return;
/* Static regions must be added before initializing the xlat tables. */
assert(!ctx->initialized);
ret = mmap_add_region_check(ctx, mm);
if (ret != 0) {
ERROR("mmap_add_region_check() failed. error %d\n", ret);
assert(0);
return;
}
/*
* Find correct place in mmap to insert new region.
*
* 1 - Lower region VA end first.
* 2 - Smaller region size first.
*
* VA 0 0xFF
*
* 1st |------|
* 2nd |------------|
* 3rd |------|
* 4th |---|
* 5th |---|
* 6th |----------|
* 7th |-------------------------------------|
*
* This is required for overlapping regions only. It simplifies adding
* regions with the loop in xlat_tables_init_internal because the outer
* ones won't overwrite block or page descriptors of regions added
* previously.
*
* Overlapping is only allowed for static regions.
*/
while ((mm_cursor->base_va + mm_cursor->size - 1) < end_va
&& mm_cursor->size)
++mm_cursor;
while ((mm_cursor->base_va + mm_cursor->size - 1 == end_va)
&& (mm_cursor->size < mm->size))
++mm_cursor;
/* Make room for new region by moving other regions up by one place */
memmove(mm_cursor + 1, mm_cursor,
(uintptr_t)mm_last - (uintptr_t)mm_cursor);
/*
* Check we haven't lost the empty sentinel from the end of the array.
* This shouldn't happen as we have checked in mmap_add_region_check
* that there is free space.
*/
assert(mm_last->size == 0);
*mm_cursor = *mm;
if (end_pa > ctx->max_pa)
ctx->max_pa = end_pa;
if (end_va > ctx->max_va)
ctx->max_va = end_va;
}
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
void mmap_add_region(unsigned long long base_pa,
uintptr_t base_va,
size_t size,
mmap_attr_t attr)
{
mmap_region_t mm = MAP_REGION(base_pa, base_va, size, attr);
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
mmap_add_region_ctx(&tf_xlat_ctx, &mm);
}
void mmap_add_ctx(xlat_ctx_t *ctx, const mmap_region_t *mm)
{
while (mm->size) {
mmap_add_region_ctx(ctx, mm);
mm++;
}
}
void mmap_add(const mmap_region_t *mm)
{
mmap_add_ctx(&tf_xlat_ctx, mm);
}
#if PLAT_XLAT_TABLES_DYNAMIC
int mmap_add_dynamic_region_ctx(xlat_ctx_t *ctx, mmap_region_t *mm)
{
mmap_region_t *mm_cursor = ctx->mmap;
mmap_region_t *mm_last = mm_cursor + ctx->mmap_num;
unsigned long long end_pa = mm->base_pa + mm->size - 1;
uintptr_t end_va = mm->base_va + mm->size - 1;
int ret;
/* Nothing to do */
if (!mm->size)
return 0;
/* Now this region is a dynamic one */
mm->attr |= MT_DYNAMIC;
ret = mmap_add_region_check(ctx, mm);
if (ret != 0)
return ret;
/*
* Find the adequate entry in the mmap array in the same way done for
* static regions in mmap_add_region_ctx().
*/
while ((mm_cursor->base_va + mm_cursor->size - 1)
< end_va && mm_cursor->size)
++mm_cursor;
while ((mm_cursor->base_va + mm_cursor->size - 1 == end_va)
&& (mm_cursor->size < mm->size))
++mm_cursor;
/* Make room for new region by moving other regions up by one place */
memmove(mm_cursor + 1, mm_cursor,
(uintptr_t)mm_last - (uintptr_t)mm_cursor);
/*
* Check we haven't lost the empty sentinal from the end of the array.
* This shouldn't happen as we have checked in mmap_add_region_check
* that there is free space.
*/
assert(mm_last->size == 0);
*mm_cursor = *mm;
/*
* Update the translation tables if the xlat tables are initialized. If
* not, this region will be mapped when they are initialized.
*/
if (ctx->initialized) {
uintptr_t end_va = xlat_tables_map_region(ctx, mm_cursor,
0, ctx->base_table, ctx->base_table_entries,
ctx->base_level);
/* Failed to map, remove mmap entry, unmap and return error. */
if (end_va != mm_cursor->base_va + mm_cursor->size - 1) {
memmove(mm_cursor, mm_cursor + 1,
(uintptr_t)mm_last - (uintptr_t)mm_cursor);
/*
* Check if the mapping function actually managed to map
* anything. If not, just return now.
*/
if (mm_cursor->base_va >= end_va)
return -ENOMEM;
/*
* Something went wrong after mapping some table
* entries, undo every change done up to this point.
*/
mmap_region_t unmap_mm = {
.base_pa = 0,
.base_va = mm->base_va,
.size = end_va - mm->base_va,
.attr = 0
};
xlat_tables_unmap_region(ctx, &unmap_mm, 0, ctx->base_table,
ctx->base_table_entries, ctx->base_level);
return -ENOMEM;
}
/*
* Make sure that all entries are written to the memory. There
* is no need to invalidate entries when mapping dynamic regions
* because new table/block/page descriptors only replace old
* invalid descriptors, that aren't TLB cached.
*/
dsbishst();
}
if (end_pa > ctx->max_pa)
ctx->max_pa = end_pa;
if (end_va > ctx->max_va)
ctx->max_va = end_va;
return 0;
}
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
int mmap_add_dynamic_region(unsigned long long base_pa,
uintptr_t base_va, size_t size, mmap_attr_t attr)
{
mmap_region_t mm = MAP_REGION(base_pa, base_va, size, attr);
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
return mmap_add_dynamic_region_ctx(&tf_xlat_ctx, &mm);
}
/*
* Removes the region with given base Virtual Address and size from the given
* context.
*
* Returns:
* 0: Success.
* EINVAL: Invalid values were used as arguments (region not found).
* EPERM: Tried to remove a static region.
*/
int mmap_remove_dynamic_region_ctx(xlat_ctx_t *ctx, uintptr_t base_va,
size_t size)
{
mmap_region_t *mm = ctx->mmap;
mmap_region_t *mm_last = mm + ctx->mmap_num;
int update_max_va_needed = 0;
int update_max_pa_needed = 0;
/* Check sanity of mmap array. */
assert(mm[ctx->mmap_num].size == 0);
while (mm->size) {
if ((mm->base_va == base_va) && (mm->size == size))
break;
++mm;
}
/* Check that the region was found */
if (mm->size == 0)
return -EINVAL;
/* If the region is static it can't be removed */
if (!(mm->attr & MT_DYNAMIC))
return -EPERM;
/* Check if this region is using the top VAs or PAs. */
if ((mm->base_va + mm->size - 1) == ctx->max_va)
update_max_va_needed = 1;
if ((mm->base_pa + mm->size - 1) == ctx->max_pa)
update_max_pa_needed = 1;
/* Update the translation tables if needed */
if (ctx->initialized) {
xlat_tables_unmap_region(ctx, mm, 0, ctx->base_table,
ctx->base_table_entries,
ctx->base_level);
xlat_arch_tlbi_va_sync();
}
/* Remove this region by moving the rest down by one place. */
memmove(mm, mm + 1, (uintptr_t)mm_last - (uintptr_t)mm);
/* Check if we need to update the max VAs and PAs */
if (update_max_va_needed) {
ctx->max_va = 0;
mm = ctx->mmap;
while (mm->size) {
if ((mm->base_va + mm->size - 1) > ctx->max_va)
ctx->max_va = mm->base_va + mm->size - 1;
++mm;
}
}
if (update_max_pa_needed) {
ctx->max_pa = 0;
mm = ctx->mmap;
while (mm->size) {
if ((mm->base_pa + mm->size - 1) > ctx->max_pa)
ctx->max_pa = mm->base_pa + mm->size - 1;
++mm;
}
}
return 0;
}
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
int mmap_remove_dynamic_region(uintptr_t base_va, size_t size)
{
return mmap_remove_dynamic_region_ctx(&tf_xlat_ctx,
base_va, size);
}
#endif /* PLAT_XLAT_TABLES_DYNAMIC */
#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
/* Print the attributes of the specified block descriptor. */
static void xlat_desc_print(const xlat_ctx_t *ctx, uint64_t desc)
{
int mem_type_index = ATTR_INDEX_GET(desc);
xlat_regime_t xlat_regime = ctx->xlat_regime;
if (mem_type_index == ATTR_IWBWA_OWBWA_NTR_INDEX) {
tf_printf("MEM");
} else if (mem_type_index == ATTR_NON_CACHEABLE_INDEX) {
tf_printf("NC");
} else {
assert(mem_type_index == ATTR_DEVICE_INDEX);
tf_printf("DEV");
}
const char *priv_str = "(PRIV)";
const char *user_str = "(USER)";
/*
* Showing Privileged vs Unprivileged only makes sense for EL1&0
* mappings
*/
const char *ro_str = "-RO";
const char *rw_str = "-RW";
const char *no_access_str = "-NOACCESS";
if (xlat_regime == EL3_REGIME) {
/* For EL3, the AP[2] bit is all what matters */
tf_printf((desc & LOWER_ATTRS(AP_RO)) ? ro_str : rw_str);
} else {
const char *ap_str = (desc & LOWER_ATTRS(AP_RO)) ? ro_str : rw_str;
tf_printf(ap_str);
tf_printf(priv_str);
/*
* EL0 can only have the same permissions as EL1 or no
* permissions at all.
*/
tf_printf((desc & LOWER_ATTRS(AP_ACCESS_UNPRIVILEGED))
? ap_str : no_access_str);
tf_printf(user_str);
}
const char *xn_str = "-XN";
const char *exec_str = "-EXEC";
if (xlat_regime == EL3_REGIME) {
/* For EL3, the XN bit is all what matters */
tf_printf(LOWER_ATTRS(XN) & desc ? xn_str : exec_str);
} else {
/* For EL0 and EL1, we need to know who has which rights */
tf_printf(LOWER_ATTRS(PXN) & desc ? xn_str : exec_str);
tf_printf(priv_str);
tf_printf(LOWER_ATTRS(UXN) & desc ? xn_str : exec_str);
tf_printf(user_str);
}
tf_printf(LOWER_ATTRS(NS) & desc ? "-NS" : "-S");
}
static const char * const level_spacers[] = {
"[LV0] ",
" [LV1] ",
" [LV2] ",
" [LV3] "
};
static const char *invalid_descriptors_ommited =
"%s(%d invalid descriptors omitted)\n";
/*
* Recursive function that reads the translation tables passed as an argument
* and prints their status.
*/
static void xlat_tables_print_internal(xlat_ctx_t *ctx,
const uintptr_t table_base_va,
uint64_t *const table_base, const int table_entries,
const unsigned int level)
{
assert(level <= XLAT_TABLE_LEVEL_MAX);
uint64_t desc;
uintptr_t table_idx_va = table_base_va;
int table_idx = 0;
size_t level_size = XLAT_BLOCK_SIZE(level);
/*
* Keep track of how many invalid descriptors are counted in a row.
* Whenever multiple invalid descriptors are found, only the first one
* is printed, and a line is added to inform about how many descriptors
* have been omitted.
*/
int invalid_row_count = 0;
while (table_idx < table_entries) {
desc = table_base[table_idx];
if ((desc & DESC_MASK) == INVALID_DESC) {
if (invalid_row_count == 0) {
tf_printf("%sVA:%p size:0x%zx\n",
level_spacers[level],
(void *)table_idx_va, level_size);
}
invalid_row_count++;
} else {
if (invalid_row_count > 1) {
tf_printf(invalid_descriptors_ommited,
level_spacers[level],
invalid_row_count - 1);
}
invalid_row_count = 0;
/*
* Check if this is a table or a block. Tables are only
* allowed in levels other than 3, but DESC_PAGE has the
* same value as DESC_TABLE, so we need to check.
*/
if (((desc & DESC_MASK) == TABLE_DESC) &&
(level < XLAT_TABLE_LEVEL_MAX)) {
/*
* Do not print any PA for a table descriptor,
* as it doesn't directly map physical memory
* but instead points to the next translation
* table in the translation table walk.
*/
tf_printf("%sVA:%p size:0x%zx\n",
level_spacers[level],
(void *)table_idx_va, level_size);
uintptr_t addr_inner = desc & TABLE_ADDR_MASK;
xlat_tables_print_internal(ctx, table_idx_va,
(uint64_t *)addr_inner,
XLAT_TABLE_ENTRIES, level + 1);
} else {
tf_printf("%sVA:%p PA:0x%llx size:0x%zx ",
level_spacers[level],
(void *)table_idx_va,
(unsigned long long)(desc & TABLE_ADDR_MASK),
level_size);
xlat_desc_print(ctx, desc);
tf_printf("\n");
}
}
table_idx++;
table_idx_va += level_size;
}
if (invalid_row_count > 1) {
tf_printf(invalid_descriptors_ommited,
level_spacers[level], invalid_row_count - 1);
}
}
#endif /* LOG_LEVEL >= LOG_LEVEL_VERBOSE */
void xlat_tables_print(xlat_ctx_t *ctx)
{
#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
const char *xlat_regime_str;
if (ctx->xlat_regime == EL1_EL0_REGIME) {
xlat_regime_str = "1&0";
} else {
assert(ctx->xlat_regime == EL3_REGIME);
xlat_regime_str = "3";
}
VERBOSE("Translation tables state:\n");
VERBOSE(" Xlat regime: EL%s\n", xlat_regime_str);
VERBOSE(" Max allowed PA: 0x%llx\n", ctx->pa_max_address);
VERBOSE(" Max allowed VA: %p\n", (void *) ctx->va_max_address);
VERBOSE(" Max mapped PA: 0x%llx\n", ctx->max_pa);
VERBOSE(" Max mapped VA: %p\n", (void *) ctx->max_va);
VERBOSE(" Initial lookup level: %i\n", ctx->base_level);
VERBOSE(" Entries @initial lookup level: %i\n",
ctx->base_table_entries);
int used_page_tables;
#if PLAT_XLAT_TABLES_DYNAMIC
used_page_tables = 0;
for (unsigned int i = 0; i < ctx->tables_num; ++i) {
if (ctx->tables_mapped_regions[i] != 0)
++used_page_tables;
}
#else
used_page_tables = ctx->next_table;
#endif
VERBOSE(" Used %i sub-tables out of %i (spare: %i)\n",
used_page_tables, ctx->tables_num,
ctx->tables_num - used_page_tables);
xlat_tables_print_internal(ctx, 0, ctx->base_table,
ctx->base_table_entries, ctx->base_level);
#endif /* LOG_LEVEL >= LOG_LEVEL_VERBOSE */
}
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
void init_xlat_tables_ctx(xlat_ctx_t *ctx)
{
assert(ctx != NULL);
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
assert(!ctx->initialized);
assert(ctx->xlat_regime == EL3_REGIME || ctx->xlat_regime == EL1_EL0_REGIME);
assert(!is_mmu_enabled_ctx(ctx));
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
mmap_region_t *mm = ctx->mmap;
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
print_mmap(mm);
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
/* All tables must be zeroed before mapping any region. */
for (unsigned int i = 0; i < ctx->base_table_entries; i++)
ctx->base_table[i] = INVALID_DESC;
for (unsigned int j = 0; j < ctx->tables_num; j++) {
#if PLAT_XLAT_TABLES_DYNAMIC
ctx->tables_mapped_regions[j] = 0;
#endif
for (unsigned int i = 0; i < XLAT_TABLE_ENTRIES; i++)
ctx->tables[j][i] = INVALID_DESC;
}
while (mm->size) {
uintptr_t end_va = xlat_tables_map_region(ctx, mm, 0, ctx->base_table,
ctx->base_table_entries, ctx->base_level);
if (end_va != mm->base_va + mm->size - 1) {
ERROR("Not enough memory to map region:\n"
" VA:%p PA:0x%llx size:0x%zx attr:0x%x\n",
(void *)mm->base_va, mm->base_pa, mm->size, mm->attr);
panic();
}
mm++;
}
assert(ctx->pa_max_address <= xlat_arch_get_max_supported_pa());
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
assert(ctx->max_va <= ctx->va_max_address);
assert(ctx->max_pa <= ctx->pa_max_address);
ctx->initialized = 1;
xlat_tables_print(ctx);
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
}
void init_xlat_tables(void)
{
init_xlat_tables_ctx(&tf_xlat_ctx);
}
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
/*
* If dynamic allocation of new regions is disabled then by the time we call the
* function enabling the MMU, we'll have registered all the memory regions to
* map for the system's lifetime. Therefore, at this point we know the maximum
* physical address that will ever be mapped.
*
* If dynamic allocation is enabled then we can't make any such assumption
* because the maximum physical address could get pushed while adding a new
* region. Therefore, in this case we have to assume that the whole address
* space size might be mapped.
*/
#ifdef PLAT_XLAT_TABLES_DYNAMIC
#define MAX_PHYS_ADDR tf_xlat_ctx.pa_max_address
#else
#define MAX_PHYS_ADDR tf_xlat_ctx.max_pa
#endif
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
#ifdef AARCH32
void enable_mmu_secure(unsigned int flags)
{
enable_mmu_arch(flags, tf_xlat_ctx.base_table, MAX_PHYS_ADDR,
tf_xlat_ctx.va_max_address);
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
}
#else
void enable_mmu_el1(unsigned int flags)
{
enable_mmu_arch(flags, tf_xlat_ctx.base_table, MAX_PHYS_ADDR,
tf_xlat_ctx.va_max_address);
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
}
void enable_mmu_el3(unsigned int flags)
{
enable_mmu_arch(flags, tf_xlat_ctx.base_table, MAX_PHYS_ADDR,
tf_xlat_ctx.va_max_address);
xlat lib v2: Expose *_ctx() APIs In a previous patch, the xlat_ctx_t type has been made public. This patch now makes the *_ctx() APIs public. Each API now has a *_ctx() variant. Most of them were already implemented and this patch just makes them public. However, some of them were missing so this patch introduces them. Now that all these APIs are public, there's no good reason for splitting them accross 2 files (xlat_tables_internal.c and xlat_tables_common.c). Therefore, this patch moves all code into xlat_tables_internal.c and removes xlat_tables_common.c. It removes it from the library's makefile as well. This last change introduces a compatibility break for platform ports that specifically include the xlat_tables_common.c file instead of including the library's Makefile. The UniPhier platform makefile has been updated to now omit this file from the list of source files. The prototype of mmap_add_region_ctx() has been slightly changed. The mmap_region_t passed in argument needs to be constant because it gets called from map_add(), which receives a constant region. The former implementation of mmap_add() used to cast the const qualifier away, which is not a good practice. Also remove init_xlation_table(), which was a sub-function of init_xlat_tables(). Now there's just init_xlat_tables() (and init_xlat_tables_ctx()). Both names were too similar, which was confusing. Besides, now that all the code is in a single file, it's no longer needed to have 2 functions for that. Change-Id: I4ed88c68e44561c3902fbebb89cb197279c5293b Signed-off-by: Sandrine Bailleux <sandrine.bailleux@arm.com>
2017-07-18 13:26:36 +01:00
}
#endif /* AARCH32 */
/*
* Do a translation table walk to find the block or page descriptor that maps
* virtual_addr.
*
* On success, return the address of the descriptor within the translation
* table. Its lookup level is stored in '*out_level'.
* On error, return NULL.
*
* xlat_table_base
* Base address for the initial lookup level.
* xlat_table_base_entries
* Number of entries in the translation table for the initial lookup level.
* virt_addr_space_size
* Size in bytes of the virtual address space.
*/
static uint64_t *find_xlat_table_entry(uintptr_t virtual_addr,
void *xlat_table_base,
int xlat_table_base_entries,
unsigned long long virt_addr_space_size,
int *out_level)
{
unsigned int start_level;
uint64_t *table;
int entries;
VERBOSE("%s(%p)\n", __func__, (void *)virtual_addr);
start_level = GET_XLAT_TABLE_LEVEL_BASE(virt_addr_space_size);
VERBOSE("Starting translation table walk from level %i\n", start_level);
table = xlat_table_base;
entries = xlat_table_base_entries;
for (unsigned int level = start_level;
level <= XLAT_TABLE_LEVEL_MAX;
++level) {
int idx;
uint64_t desc;
uint64_t desc_type;
VERBOSE("Table address: %p\n", (void *)table);
idx = XLAT_TABLE_IDX(virtual_addr, level);
VERBOSE("Index into level %i table: %i\n", level, idx);
if (idx >= entries) {
VERBOSE("Invalid address\n");
return NULL;
}
desc = table[idx];
desc_type = desc & DESC_MASK;
VERBOSE("Descriptor at level %i: 0x%llx\n", level,
(unsigned long long)desc);
if (desc_type == INVALID_DESC) {
VERBOSE("Invalid entry (memory not mapped)\n");
return NULL;
}
if (level == XLAT_TABLE_LEVEL_MAX) {
/*
* There can't be table entries at the final lookup
* level.
*/
assert(desc_type == PAGE_DESC);
VERBOSE("Descriptor mapping a memory page (size: 0x%llx)\n",
(unsigned long long)XLAT_BLOCK_SIZE(XLAT_TABLE_LEVEL_MAX));
*out_level = level;
return &table[idx];
}
if (desc_type == BLOCK_DESC) {
VERBOSE("Descriptor mapping a memory block (size: 0x%llx)\n",
(unsigned long long)XLAT_BLOCK_SIZE(level));
*out_level = level;
return &table[idx];
}
assert(desc_type == TABLE_DESC);
VERBOSE("Table descriptor, continuing xlat table walk...\n");
table = (uint64_t *)(uintptr_t)(desc & TABLE_ADDR_MASK);
entries = XLAT_TABLE_ENTRIES;
}
/*
* This shouldn't be reached, the translation table walk should end at
* most at level XLAT_TABLE_LEVEL_MAX and return from inside the loop.
*/
assert(0);
return NULL;
}
static int get_mem_attributes_internal(const xlat_ctx_t *ctx, uintptr_t base_va,
mmap_attr_t *attributes, uint64_t **table_entry,
unsigned long long *addr_pa, int *table_level)
{
uint64_t *entry;
uint64_t desc;
int level;
unsigned long long virt_addr_space_size;
/*
* Sanity-check arguments.
*/
assert(ctx != NULL);
assert(ctx->initialized);
assert(ctx->xlat_regime == EL1_EL0_REGIME || ctx->xlat_regime == EL3_REGIME);
virt_addr_space_size = (unsigned long long)ctx->va_max_address + 1;
assert(virt_addr_space_size > 0);
entry = find_xlat_table_entry(base_va,
ctx->base_table,
ctx->base_table_entries,
virt_addr_space_size,
&level);
if (entry == NULL) {
WARN("Address %p is not mapped.\n", (void *)base_va);
return -EINVAL;
}
if (addr_pa != NULL) {
*addr_pa = *entry & TABLE_ADDR_MASK;
}
if (table_entry != NULL) {
*table_entry = entry;
}
if (table_level != NULL) {
*table_level = level;
}
desc = *entry;
#if LOG_LEVEL >= LOG_LEVEL_VERBOSE
VERBOSE("Attributes: ");
xlat_desc_print(ctx, desc);
tf_printf("\n");
#endif /* LOG_LEVEL >= LOG_LEVEL_VERBOSE */
assert(attributes != NULL);
*attributes = 0;
int attr_index = (desc >> ATTR_INDEX_SHIFT) & ATTR_INDEX_MASK;
if (attr_index == ATTR_IWBWA_OWBWA_NTR_INDEX) {
*attributes |= MT_MEMORY;
} else if (attr_index == ATTR_NON_CACHEABLE_INDEX) {
*attributes |= MT_NON_CACHEABLE;
} else {
assert(attr_index == ATTR_DEVICE_INDEX);
*attributes |= MT_DEVICE;
}
int ap2_bit = (desc >> AP2_SHIFT) & 1;
if (ap2_bit == AP2_RW)
*attributes |= MT_RW;
if (ctx->xlat_regime == EL1_EL0_REGIME) {
int ap1_bit = (desc >> AP1_SHIFT) & 1;
if (ap1_bit == AP1_ACCESS_UNPRIVILEGED)
*attributes |= MT_USER;
}
int ns_bit = (desc >> NS_SHIFT) & 1;
if (ns_bit == 1)
*attributes |= MT_NS;
uint64_t xn_mask = xlat_arch_regime_get_xn_desc(ctx->xlat_regime);
if ((desc & xn_mask) == xn_mask) {
*attributes |= MT_EXECUTE_NEVER;
} else {
assert((desc & xn_mask) == 0);
}
return 0;
}
int get_mem_attributes(const xlat_ctx_t *ctx, uintptr_t base_va,
mmap_attr_t *attributes)
{
return get_mem_attributes_internal(ctx, base_va, attributes,
NULL, NULL, NULL);
}
int change_mem_attributes(xlat_ctx_t *ctx,
uintptr_t base_va,
size_t size,
mmap_attr_t attr)
{
/* Note: This implementation isn't optimized. */
assert(ctx != NULL);
assert(ctx->initialized);
unsigned long long virt_addr_space_size =
(unsigned long long)ctx->va_max_address + 1;
assert(virt_addr_space_size > 0);
if (!IS_PAGE_ALIGNED(base_va)) {
WARN("%s: Address %p is not aligned on a page boundary.\n",
__func__, (void *)base_va);
return -EINVAL;
}
if (size == 0) {
WARN("%s: Size is 0.\n", __func__);
return -EINVAL;
}
if ((size % PAGE_SIZE) != 0) {
WARN("%s: Size 0x%zx is not a multiple of a page size.\n",
__func__, size);
return -EINVAL;
}
if (((attr & MT_EXECUTE_NEVER) == 0) && ((attr & MT_RW) != 0)) {
WARN("%s() doesn't allow to remap memory as read-write and executable.\n",
__func__);
return -EINVAL;
}
int pages_count = size / PAGE_SIZE;
VERBOSE("Changing memory attributes of %i pages starting from address %p...\n",
pages_count, (void *)base_va);
uintptr_t base_va_original = base_va;
/*
* Sanity checks.
*/
for (int i = 0; i < pages_count; ++i) {
uint64_t *entry;
uint64_t desc;
int level;
entry = find_xlat_table_entry(base_va,
ctx->base_table,
ctx->base_table_entries,
virt_addr_space_size,
&level);
if (entry == NULL) {
WARN("Address %p is not mapped.\n", (void *)base_va);
return -EINVAL;
}
desc = *entry;
/*
* Check that all the required pages are mapped at page
* granularity.
*/
if (((desc & DESC_MASK) != PAGE_DESC) ||
(level != XLAT_TABLE_LEVEL_MAX)) {
WARN("Address %p is not mapped at the right granularity.\n",
(void *)base_va);
WARN("Granularity is 0x%llx, should be 0x%x.\n",
(unsigned long long)XLAT_BLOCK_SIZE(level), PAGE_SIZE);
return -EINVAL;
}
/*
* If the region type is device, it shouldn't be executable.
*/
int attr_index = (desc >> ATTR_INDEX_SHIFT) & ATTR_INDEX_MASK;
if (attr_index == ATTR_DEVICE_INDEX) {
if ((attr & MT_EXECUTE_NEVER) == 0) {
WARN("Setting device memory as executable at address %p.",
(void *)base_va);
return -EINVAL;
}
}
base_va += PAGE_SIZE;
}
/* Restore original value. */
base_va = base_va_original;
VERBOSE("%s: All pages are mapped, now changing their attributes...\n",
__func__);
for (int i = 0; i < pages_count; ++i) {
mmap_attr_t old_attr, new_attr;
uint64_t *entry;
int level;
unsigned long long addr_pa;
get_mem_attributes_internal(ctx, base_va, &old_attr,
&entry, &addr_pa, &level);
VERBOSE("Old attributes: 0x%x\n", old_attr);
/*
* From attr, only MT_RO/MT_RW, MT_EXECUTE/MT_EXECUTE_NEVER and
* MT_USER/MT_PRIVILEGED are taken into account. Any other
* information is ignored.
*/
/* Clean the old attributes so that they can be rebuilt. */
new_attr = old_attr & ~(MT_RW|MT_EXECUTE_NEVER|MT_USER);
/*
* Update attributes, but filter out the ones this function
* isn't allowed to change.
*/
new_attr |= attr & (MT_RW|MT_EXECUTE_NEVER|MT_USER);
VERBOSE("New attributes: 0x%x\n", new_attr);
/*
* The break-before-make sequence requires writing an invalid
* descriptor and making sure that the system sees the change
* before writing the new descriptor.
*/
*entry = INVALID_DESC;
/* Invalidate any cached copy of this mapping in the TLBs. */
xlat_arch_tlbi_va_regime(base_va, ctx->xlat_regime);
/* Ensure completion of the invalidation. */
xlat_arch_tlbi_va_sync();
/* Write new descriptor */
*entry = xlat_desc(ctx, new_attr, addr_pa, level);
base_va += PAGE_SIZE;
}
/* Ensure that the last descriptor writen is seen by the system. */
dsbish();
return 0;
}