andrius
/
arm-trusted-firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
arm-trusted-firmware/plat/hisilicon/poplar/platform.mk

113 lines
3.3 KiB
Makefile
Raw Normal View History

Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
#
poplar: Decouple from plat/arm files plat/arm files should only be used by Arm platforms. If other platforms use them, they create dependencies that can introduce problems when updating Arm platforms. This patch copies the needed code from Arm platforms so that poplar can be independent from them. Change-Id: I0b194f5bdb0377b8ccacbd400e021614c026c7fe Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2018-10-26 11:12:31 +01:00
# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
#
# SPDX-License-Identifier: BSD-3-Clause
#
poplar: Add BL32 (OP-TEE) support Signed-off-by: Victor Chong <victor.chong@linaro.org>
2017-10-27 17:59:41 +01:00
# On Poplar, the TSP can execute from TZC secure area in DRAM.
hikey*, poplar: platform.mk: Fix typo in variable assignments Signed-off-by: Victor Chong <victor.chong@linaro.org>
2018-01-31 15:37:49 +00:00
POPLAR_TSP_RAM_LOCATION ?= dram
poplar: Add BL32 (OP-TEE) support Signed-off-by: Victor Chong <victor.chong@linaro.org>
2017-10-27 17:59:41 +01:00
ifeq (${POPLAR_TSP_RAM_LOCATION}, dram)
POPLAR_TSP_RAM_LOCATION_ID = POPLAR_DRAM_ID
poplar: Fix typo Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-29 09:08:34 +00:00
else ifeq (${POPLAR_TSP_RAM_LOCATION}, sram)
hikey*, poplar: platform.mk: Fix typo in variable assignments Signed-off-by: Victor Chong <victor.chong@linaro.org>
2018-01-31 15:37:49 +00:00
POPLAR_TSP_RAM_LOCATION_ID = POPLAR_SRAM_ID
poplar: Add BL32 (OP-TEE) support Signed-off-by: Victor Chong <victor.chong@linaro.org>
2017-10-27 17:59:41 +01:00
else
$(error "Currently unsupported POPLAR_TSP_RAM_LOCATION value")
endif
$(eval $(call add_define,POPLAR_TSP_RAM_LOCATION_ID))
poplar: Add build option for dram size Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-29 09:11:02 +00:00
POPLAR_DRAM_SIZE ?= two_gig
ifeq (${POPLAR_DRAM_SIZE}, two_gig)
POPLAR_DRAM_SIZE_ID = POPLAR_DRAM_SIZE_2G
else ifeq (${POPLAR_DRAM_SIZE}, one_gig)
POPLAR_DRAM_SIZE_ID = POPLAR_DRAM_SIZE_1G
else
$(error "Currently unsupported POPLAR_DRAM_SIZE value")
endif
$(eval $(call add_define,POPLAR_DRAM_SIZE_ID))
poplar: Add support for recovery build Signed-off-by: Victor Chong <victor.chong@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-15 15:29:47 +00:00
POPLAR_RECOVERY := 0
$(eval $(call add_define,POPLAR_RECOVERY))
poplar: Support Trusted OS extra image (OP-TEE header) parsing Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-31 15:35:39 +00:00
# Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
# in the FIP if the platform requires.
ifneq ($(BL32_EXTRA1),)
poplar: rename FIP_ADD_IMG to TOOL_ADD_IMG Fixes: f3d522b ("poplar: Support Trusted OS extra image (OP-TEE header) parsing") Signed-off-by: Victor Chong <victor.chong@linaro.org>
2018-04-23 15:52:51 +01:00
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA1,--tos-fw-extra1))
poplar: Support Trusted OS extra image (OP-TEE header) parsing Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-31 15:35:39 +00:00
endif
ifneq ($(BL32_EXTRA2),)
poplar: rename FIP_ADD_IMG to TOOL_ADD_IMG Fixes: f3d522b ("poplar: Support Trusted OS extra image (OP-TEE header) parsing") Signed-off-by: Victor Chong <victor.chong@linaro.org>
2018-04-23 15:52:51 +01:00
$(eval $(call TOOL_ADD_IMG,BL32_EXTRA2,--tos-fw-extra2))
poplar: Support Trusted OS extra image (OP-TEE header) parsing Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-31 15:35:39 +00:00
endif
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
NEED_BL33 := yes
COLD_BOOT_SINGLE_CPU := 1
PROGRAMMABLE_RESET_ADDRESS := 1
CTX_INCLUDE_FPREGS := 1
ERRATA_A53_855873 := 1
ERRATA_A53_835769 := 1
ERRATA_A53_843419 := 1
Do not enable SVE on pre-v8.2 platforms Pre-v8.2 platforms such as the Juno platform does not have the Scalable Vector Extensions implemented and so the build option ENABLE_SVE is set to zero. This has a minor performance improvement with no functional impact. Change-Id: Ib072735db7a0247406f8b60e325b7e28b1e04ad1 Signed-off-by: David Cunado <david.cunado@arm.com>
2017-10-31 23:19:21 +00:00
ENABLE_SVE_FOR_NS := 0
Disable workaround for CVE-2017-5715 on unaffected platforms Change-Id: Ib67b841ab621ca1ace3280e44cf3e1d83052cb73 Signed-off-by: Dimitris Papastamos <dimitris.papastamos@arm.com>
2018-01-24 16:41:14 +00:00
WORKAROUND_CVE_2017_5715 := 0
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
PLAT_PL061_MAX_GPIOS := 104
$(eval $(call add_define,PLAT_PL061_MAX_GPIOS))
PLAT_INCLUDES := -Iplat/hisilicon/poplar/include \
Remove unneeded include paths in PLAT_INCLUDES Also, update platform_def.h guidelines about includes in the porting guide. Change-Id: I1ae338c9dd3242b309f6d53687ba2cb755d488c3 Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2019-02-01 12:22:22 +00:00
-Iplat/hisilicon/poplar
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
PLAT_BL_COMMON_SOURCES := \
poplar: Migrate to new interfaces - Remove support for LOAD_IMAGE_V2=0. - Replace deprecated bl1_init_bl2_mem_layout(). - Migrate to bl2_early_platform_setup2(). - Migrate to bl31_early_platform_setup2(). - Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE. - Remove references to removed build options. - Update Makefile paths. Change-Id: I52e02633365b3db4244f7ff0f99a6446eae619f0 Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2018-09-24 17:15:15 +01:00
lib/xlat_tables/aarch64/xlat_tables.c \
lib/xlat_tables/xlat_tables_common.c \
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
drivers/delay_timer/generic_delay_timer.c \
drivers/arm/gic/common/gic_common.c \
drivers/arm/gic/v2/gicv2_helpers.c \
drivers/delay_timer/delay_timer.c \
poplar: Migrate to new interfaces - Remove support for LOAD_IMAGE_V2=0. - Replace deprecated bl1_init_bl2_mem_layout(). - Migrate to bl2_early_platform_setup2(). - Migrate to bl31_early_platform_setup2(). - Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE. - Remove references to removed build options. - Update Makefile paths. Change-Id: I52e02633365b3db4244f7ff0f99a6446eae619f0 Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2018-09-24 17:15:15 +01:00
drivers/arm/pl011/aarch64/pl011_console.S \
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
drivers/arm/gic/v2/gicv2_main.c \
plat/common/plat_gicv2.c \
poplar: Decouple from plat/arm files plat/arm files should only be used by Arm platforms. If other platforms use them, they create dependencies that can introduce problems when updating Arm platforms. This patch copies the needed code from Arm platforms so that poplar can be independent from them. Change-Id: I0b194f5bdb0377b8ccacbd400e021614c026c7fe Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2018-10-26 11:12:31 +01:00
plat/hisilicon/poplar/aarch64/platform_common.c \
plat/hisilicon/poplar/aarch64/poplar_helpers.S \
plat/hisilicon/poplar/poplar_gicv2.c
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
BL1_SOURCES += \
lib/cpus/aarch64/cortex_a53.S \
drivers/arm/pl061/pl061_gpio.c \
plat/poplar: migrate to mmc framework Migrate from emmc framework to mmc framework. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
2018-08-04 11:07:26 +01:00
drivers/mmc/mmc.c \
poplar: Enable emmc support Let bl1 and bl2 have the ability to load images from emmc instead of dram (mmap). Signed-off-by: Victor Chong <victor.chong@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-02 16:53:08 +00:00
drivers/synopsys/emmc/dw_mmc.c \
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
drivers/io/io_storage.c \
drivers/io/io_block.c \
drivers/gpio/gpio.c \
drivers/io/io_fip.c \
drivers/io/io_memmap.c \
plat/hisilicon/poplar/bl1_plat_setup.c \
poplar: Fix typo Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-29 09:08:34 +00:00
plat/hisilicon/poplar/plat_storage.c
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
BL2_SOURCES += \
drivers/arm/pl061/pl061_gpio.c \
plat/poplar: migrate to mmc framework Migrate from emmc framework to mmc framework. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
2018-08-04 11:07:26 +01:00
drivers/mmc/mmc.c \
poplar: Enable emmc support Let bl1 and bl2 have the ability to load images from emmc instead of dram (mmap). Signed-off-by: Victor Chong <victor.chong@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-02 16:53:08 +00:00
drivers/synopsys/emmc/dw_mmc.c \
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
drivers/io/io_storage.c \
drivers/io/io_block.c \
drivers/io/io_fip.c \
drivers/gpio/gpio.c \
drivers/io/io_memmap.c \
plat/hisilicon/poplar/bl2_plat_setup.c \
plat/hisilicon/poplar/plat_storage.c
poplar: Add LOAD_IMAGE_V2 support Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-31 15:35:22 +00:00
BL2_SOURCES += \
plat/hisilicon/poplar/bl2_plat_mem_params_desc.c \
plat/hisilicon/poplar/poplar_image_load.c \
common/desc_image_load.c
poplar: Support Trusted OS extra image (OP-TEE header) parsing Signed-off-by: Victor Chong <victor.chong@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org>
2018-01-31 15:35:39 +00:00
ifeq (${SPD},opteed)
BL2_SOURCES += \
lib/optee/optee_utils.c
endif
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
BL31_SOURCES += \
lib/cpus/aarch64/aem_generic.S \
lib/cpus/aarch64/cortex_a53.S \
poplar: Migrate to new interfaces - Remove support for LOAD_IMAGE_V2=0. - Replace deprecated bl1_init_bl2_mem_layout(). - Migrate to bl2_early_platform_setup2(). - Migrate to bl31_early_platform_setup2(). - Use PLAT_VIRT_ADDR_SPACE_SIZE and PLAT_PHY_ADDR_SPACE_SIZE. - Remove references to removed build options. - Update Makefile paths. Change-Id: I52e02633365b3db4244f7ff0f99a6446eae619f0 Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>
2018-09-24 17:15:15 +01:00
plat/common/plat_psci_common.c \
Poplar: Initial commit for Poplar E-96Boards The board features the Hi3798C V200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable of running any commercial set-top solution based on Linux or Android. Its high performance specification also supports a premium user experience with up to H.265 HEVC decoding of 4K video at 60 frames per second. SOC Hisilicon Hi3798CV200 CPU Quad-core ARM Cortex-A53 64 bit DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB USB Two USB 2.0 ports One USB 3.0 ports CONSOLE USB-micro port for console support ETHERNET 1 GBe Ethernet PCIE One PCIe 2.0 interfaces JTAG 8-Pin JTAG EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor WIFI 802.11AC 2*2 with Bluetooth CONNECTORS One connector for Smart Card One connector for TSI The platform boot sequence is as follows: l-loader --> arm_trusted_firmware --> u-boot Repositories: - https://github.com/Linaro/poplar-l-loader.git - https://github.com/Linaro/poplar-u-boot.git U-Boot is also upstream in the project's master branch. Make sure you are using the correct branch on each one of these repositories. The definition of "correct" might change over time (at this moment in time this would be the "latest" branch). Build Line: make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1 PLAT=poplar BL33=/path/to/u-boot.bin Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Alex Elder <elder@linaro.org>
2017-06-28 09:11:31 +01:00
plat/hisilicon/poplar/bl31_plat_setup.c \
plat/hisilicon/poplar/plat_topology.c \
plat/hisilicon/poplar/plat_pm.c