arm-trusted-firmware/plat/arm/board/fvp/fvp_pm.c

343 lines
12 KiB
C
Raw Normal View History

2013-10-25 09:08:21 +01:00
/*
* Copyright (c) 2013-2016, ARM Limited and Contributors. All rights reserved.
2013-10-25 09:08:21 +01:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch_helpers.h>
#include <arm_config.h>
#include <assert.h>
#include <debug.h>
#include <errno.h>
#include <mmio.h>
#include <platform.h>
#include <plat_arm.h>
2013-10-25 09:08:21 +01:00
#include <psci.h>
#include <v2m_def.h>
#include "drivers/pwrc/fvp_pwrc.h"
#include "fvp_def.h"
#include "fvp_private.h"
2013-10-25 09:08:21 +01:00
#if ARM_RECOM_STATE_ID_ENC
/*
* The table storing the valid idle power states. Ensure that the
* array entries are populated in ascending order of state-id to
* enable us to use binary search during power state validation.
* The table must be terminated by a NULL entry.
*/
const unsigned int arm_pm_idle_states[] = {
/* State-id - 0x01 */
arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_RET,
ARM_PWR_LVL0, PSTATE_TYPE_STANDBY),
/* State-id - 0x02 */
arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_OFF,
ARM_PWR_LVL0, PSTATE_TYPE_POWERDOWN),
/* State-id - 0x22 */
arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF,
ARM_PWR_LVL1, PSTATE_TYPE_POWERDOWN),
0,
};
#endif
/*******************************************************************************
* Function which implements the common FVP specific operations to power down a
* cpu in response to a CPU_OFF or CPU_SUSPEND request.
******************************************************************************/
static void fvp_cpu_pwrdwn_common(void)
{
/* Prevent interrupts from spuriously waking up this cpu */
Rework use of ARM GIC drivers on ARM platforms Suport for ARM GIC v2.0 and v3.0 drivers has been reworked to create three separate drivers instead of providing a single driver that can work on both versions of the GIC architecture. These drivers correspond to the following software use cases: 1. A GICv2 only driver that can run only on ARM GIC v2.0 implementations e.g. GIC-400 2. A GICv3 only driver that can run only on ARM GIC v3.0 implementations e.g. GIC-500 in a mode where all interrupt regimes use GICv3 features 3. A deprecated GICv3 driver that operates in legacy mode. This driver can operate only in the GICv2 mode in the secure world. On a GICv3 system, this driver allows normal world to run in either GICv3 mode (asymmetric mode) or in the GICv2 mode. Both modes of operation are deprecated on GICv3 systems. ARM platforms implement both versions of the GIC architecture. This patch adds a layer of abstraction to help ARM platform ports chose the right GIC driver and corresponding platform support. This is as described below: 1. A set of ARM common functions have been introduced to initialise the GIC and the driver during cold and warm boot. These functions are prefixed as "plat_arm_gic_". Weak definitions of these functions have been provided for each type of driver. 2. Each platform includes the sources that implement the right functions directly into the its makefile. The FVP can be instantiated with different versions of the GIC architecture. It uses the FVP_USE_GIC_DRIVER build option to specify which of the three drivers should be included in the build. 3. A list of secure interrupts has to be provided to initialise each of the three GIC drivers. For GIC v3.0 the interrupt ids have to be further categorised as Group 0 and Group 1 Secure interrupts. For GIC v2.0, the two types are merged and treated as Group 0 interrupts. The two lists of interrupts are exported from the platform_def.h. The lists are constructed by adding a list of board specific interrupt ids to a list of ids common to all ARM platforms and Compute sub-systems. This patch also makes some fields of `arm_config` data structure in FVP redundant and these unused fields are removed. Change-Id: Ibc8c087be7a8a6b041b78c2c3bd0c648cd2035d8
2015-11-03 14:18:34 +00:00
plat_arm_gic_cpuif_disable();
/* Program the power controller to power off this cpu. */
fvp_pwrc_write_ppoffr(read_mpidr_el1());
}
/*******************************************************************************
* Function which implements the common FVP specific operations to power down a
* cluster in response to a CPU_OFF or CPU_SUSPEND request.
******************************************************************************/
static void fvp_cluster_pwrdwn_common(void)
{
uint64_t mpidr = read_mpidr_el1();
/* Disable coherency if this cluster is to be turned off */
fvp_interconnect_disable();
/* Program the power controller to turn the cluster off */
fvp_pwrc_write_pcoffr(mpidr);
}
static void fvp_power_domain_on_finish_common(const psci_power_state_t *target_state)
{
unsigned long mpidr;
assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_OFF);
/* Get the mpidr for this cpu */
mpidr = read_mpidr_el1();
/* Perform the common cluster specific operations */
if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
ARM_LOCAL_STATE_OFF) {
/*
* This CPU might have woken up whilst the cluster was
* attempting to power down. In this case the FVP power
* controller will have a pending cluster power off request
* which needs to be cleared by writing to the PPONR register.
* This prevents the power controller from interpreting a
* subsequent entry of this cpu into a simple wfi as a power
* down request.
*/
fvp_pwrc_write_pponr(mpidr);
/* Enable coherency if this cluster was off */
fvp_interconnect_enable();
}
/*
* Clear PWKUPR.WEN bit to ensure interrupts do not interfere
* with a cpu power down unless the bit is set again
*/
fvp_pwrc_clr_wen(mpidr);
}
/*******************************************************************************
* FVP handler called when a CPU is about to enter standby.
******************************************************************************/
void fvp_cpu_standby(plat_local_state_t cpu_state)
{
assert(cpu_state == ARM_LOCAL_STATE_RET);
/*
* Enter standby state
* dsb is good practice before using wfi to enter low power states
*/
dsb();
wfi();
}
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* FVP handler called when a power domain is about to be turned on. The
* mpidr determines the CPU to be turned on.
2013-10-25 09:08:21 +01:00
******************************************************************************/
int fvp_pwr_domain_on(u_register_t mpidr)
2013-10-25 09:08:21 +01:00
{
int rc = PSCI_E_SUCCESS;
unsigned int psysr;
/*
* Ensure that we do not cancel an inflight power off request for the
* target cpu. That would leave it in a zombie wfi. Wait for it to power
* off and then program the power controller to turn that CPU on.
2013-10-25 09:08:21 +01:00
*/
do {
psysr = fvp_pwrc_read_psysr(mpidr);
} while (psysr & PSYSR_AFF_L0);
fvp_pwrc_write_pponr(mpidr);
return rc;
}
/*******************************************************************************
* FVP handler called when a power domain is about to be turned off. The
* target_state encodes the power state that each level should transition to.
2013-10-25 09:08:21 +01:00
******************************************************************************/
void fvp_pwr_domain_off(const psci_power_state_t *target_state)
2013-10-25 09:08:21 +01:00
{
assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_OFF);
2013-10-25 09:08:21 +01:00
/*
* If execution reaches this stage then this power domain will be
* suspended. Perform at least the cpu specific actions followed
* by the cluster specific operations if applicable.
*/
fvp_cpu_pwrdwn_common();
2013-10-25 09:08:21 +01:00
if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
ARM_LOCAL_STATE_OFF)
fvp_cluster_pwrdwn_common();
2013-10-25 09:08:21 +01:00
}
/*******************************************************************************
* FVP handler called when a power domain is about to be suspended. The
* target_state encodes the power state that each level should transition to.
2013-10-25 09:08:21 +01:00
******************************************************************************/
void fvp_pwr_domain_suspend(const psci_power_state_t *target_state)
2013-10-25 09:08:21 +01:00
{
unsigned long mpidr;
/*
* FVP has retention only at cpu level. Just return
* as nothing is to be done for retention.
*/
if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_RET)
return;
2013-10-25 09:08:21 +01:00
assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_OFF);
/* Get the mpidr for this cpu */
mpidr = read_mpidr_el1();
/* Program the power controller to enable wakeup interrupts. */
fvp_pwrc_set_wen(mpidr);
/* Perform the common cpu specific operations */
fvp_cpu_pwrdwn_common();
/* Perform the common cluster specific operations */
if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
ARM_LOCAL_STATE_OFF)
fvp_cluster_pwrdwn_common();
2013-10-25 09:08:21 +01:00
}
/*******************************************************************************
* FVP handler called when a power domain has just been powered on after
* being turned off earlier. The target_state encodes the low power state that
* each level has woken up from.
2013-10-25 09:08:21 +01:00
******************************************************************************/
void fvp_pwr_domain_on_finish(const psci_power_state_t *target_state)
2013-10-25 09:08:21 +01:00
{
fvp_power_domain_on_finish_common(target_state);
2013-10-25 09:08:21 +01:00
/* Enable the gic cpu interface */
Rework use of ARM GIC drivers on ARM platforms Suport for ARM GIC v2.0 and v3.0 drivers has been reworked to create three separate drivers instead of providing a single driver that can work on both versions of the GIC architecture. These drivers correspond to the following software use cases: 1. A GICv2 only driver that can run only on ARM GIC v2.0 implementations e.g. GIC-400 2. A GICv3 only driver that can run only on ARM GIC v3.0 implementations e.g. GIC-500 in a mode where all interrupt regimes use GICv3 features 3. A deprecated GICv3 driver that operates in legacy mode. This driver can operate only in the GICv2 mode in the secure world. On a GICv3 system, this driver allows normal world to run in either GICv3 mode (asymmetric mode) or in the GICv2 mode. Both modes of operation are deprecated on GICv3 systems. ARM platforms implement both versions of the GIC architecture. This patch adds a layer of abstraction to help ARM platform ports chose the right GIC driver and corresponding platform support. This is as described below: 1. A set of ARM common functions have been introduced to initialise the GIC and the driver during cold and warm boot. These functions are prefixed as "plat_arm_gic_". Weak definitions of these functions have been provided for each type of driver. 2. Each platform includes the sources that implement the right functions directly into the its makefile. The FVP can be instantiated with different versions of the GIC architecture. It uses the FVP_USE_GIC_DRIVER build option to specify which of the three drivers should be included in the build. 3. A list of secure interrupts has to be provided to initialise each of the three GIC drivers. For GIC v3.0 the interrupt ids have to be further categorised as Group 0 and Group 1 Secure interrupts. For GIC v2.0, the two types are merged and treated as Group 0 interrupts. The two lists of interrupts are exported from the platform_def.h. The lists are constructed by adding a list of board specific interrupt ids to a list of ids common to all ARM platforms and Compute sub-systems. This patch also makes some fields of `arm_config` data structure in FVP redundant and these unused fields are removed. Change-Id: Ibc8c087be7a8a6b041b78c2c3bd0c648cd2035d8
2015-11-03 14:18:34 +00:00
plat_arm_gic_pcpu_init();
/* Program the gic per-cpu distributor or re-distributor interface */
plat_arm_gic_cpuif_enable();
2013-10-25 09:08:21 +01:00
}
/*******************************************************************************
* FVP handler called when a power domain has just been powered on after
* having been suspended earlier. The target_state encodes the low power state
* that each level has woken up from.
2013-10-25 09:08:21 +01:00
* TODO: At the moment we reuse the on finisher and reinitialize the secure
* context. Need to implement a separate suspend finisher.
******************************************************************************/
void fvp_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
2013-10-25 09:08:21 +01:00
{
/*
* Nothing to be done on waking up from retention from CPU level.
*/
if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
ARM_LOCAL_STATE_RET)
return;
fvp_power_domain_on_finish_common(target_state);
/* Enable the gic cpu interface */
Rework use of ARM GIC drivers on ARM platforms Suport for ARM GIC v2.0 and v3.0 drivers has been reworked to create three separate drivers instead of providing a single driver that can work on both versions of the GIC architecture. These drivers correspond to the following software use cases: 1. A GICv2 only driver that can run only on ARM GIC v2.0 implementations e.g. GIC-400 2. A GICv3 only driver that can run only on ARM GIC v3.0 implementations e.g. GIC-500 in a mode where all interrupt regimes use GICv3 features 3. A deprecated GICv3 driver that operates in legacy mode. This driver can operate only in the GICv2 mode in the secure world. On a GICv3 system, this driver allows normal world to run in either GICv3 mode (asymmetric mode) or in the GICv2 mode. Both modes of operation are deprecated on GICv3 systems. ARM platforms implement both versions of the GIC architecture. This patch adds a layer of abstraction to help ARM platform ports chose the right GIC driver and corresponding platform support. This is as described below: 1. A set of ARM common functions have been introduced to initialise the GIC and the driver during cold and warm boot. These functions are prefixed as "plat_arm_gic_". Weak definitions of these functions have been provided for each type of driver. 2. Each platform includes the sources that implement the right functions directly into the its makefile. The FVP can be instantiated with different versions of the GIC architecture. It uses the FVP_USE_GIC_DRIVER build option to specify which of the three drivers should be included in the build. 3. A list of secure interrupts has to be provided to initialise each of the three GIC drivers. For GIC v3.0 the interrupt ids have to be further categorised as Group 0 and Group 1 Secure interrupts. For GIC v2.0, the two types are merged and treated as Group 0 interrupts. The two lists of interrupts are exported from the platform_def.h. The lists are constructed by adding a list of board specific interrupt ids to a list of ids common to all ARM platforms and Compute sub-systems. This patch also makes some fields of `arm_config` data structure in FVP redundant and these unused fields are removed. Change-Id: Ibc8c087be7a8a6b041b78c2c3bd0c648cd2035d8
2015-11-03 14:18:34 +00:00
plat_arm_gic_cpuif_enable();
2013-10-25 09:08:21 +01:00
}
/*******************************************************************************
* FVP handlers to shutdown/reboot the system
******************************************************************************/
static void __dead2 fvp_system_off(void)
{
/* Write the System Configuration Control Register */
mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
V2M_CFGCTRL_START |
V2M_CFGCTRL_RW |
V2M_CFGCTRL_FUNC(V2M_FUNC_SHUTDOWN));
wfi();
ERROR("FVP System Off: operation not handled.\n");
panic();
}
static void __dead2 fvp_system_reset(void)
{
/* Write the System Configuration Control Register */
mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
V2M_CFGCTRL_START |
V2M_CFGCTRL_RW |
V2M_CFGCTRL_FUNC(V2M_FUNC_REBOOT));
wfi();
ERROR("FVP System Reset: operation not handled.\n");
panic();
}
2013-10-25 09:08:21 +01:00
static int fvp_node_hw_state(u_register_t target_cpu,
unsigned int power_level)
{
unsigned int psysr;
int ret;
/*
* The format of 'power_level' is implementation-defined, but 0 must
* mean a CPU. We also allow 1 to denote the cluster
*/
if (power_level != ARM_PWR_LVL0 && power_level != ARM_PWR_LVL1)
return PSCI_E_INVALID_PARAMS;
/*
* Read the status of the given MPDIR from FVP power controller. The
* power controller only gives us on/off status, so map that to expected
* return values of the PSCI call
*/
psysr = fvp_pwrc_read_psysr(target_cpu);
if (psysr == PSYSR_INVALID)
return PSCI_E_INVALID_PARAMS;
switch (power_level) {
case ARM_PWR_LVL0:
ret = (psysr & PSYSR_AFF_L0) ? HW_ON : HW_OFF;
break;
case ARM_PWR_LVL1:
ret = (psysr & PSYSR_AFF_L1) ? HW_ON : HW_OFF;
break;
default:
assert(0);
}
return ret;
}
2013-10-25 09:08:21 +01:00
/*******************************************************************************
* Export the platform handlers via plat_arm_psci_pm_ops. The ARM Standard
* platform layer will take care of registering the handlers with PSCI.
2013-10-25 09:08:21 +01:00
******************************************************************************/
const plat_psci_ops_t plat_arm_psci_pm_ops = {
.cpu_standby = fvp_cpu_standby,
.pwr_domain_on = fvp_pwr_domain_on,
.pwr_domain_off = fvp_pwr_domain_off,
.pwr_domain_suspend = fvp_pwr_domain_suspend,
.pwr_domain_on_finish = fvp_pwr_domain_on_finish,
.pwr_domain_suspend_finish = fvp_pwr_domain_suspend_finish,
.system_off = fvp_system_off,
.system_reset = fvp_system_reset,
.validate_power_state = arm_validate_power_state,
.validate_ns_entrypoint = arm_validate_ns_entrypoint,
.get_node_hw_state = fvp_node_hw_state
2013-10-25 09:08:21 +01:00
};